- 11 Jan, 2014 5 commits
-
-
Bartlomiej Zolnierkiewicz authored
dev->state_count is now always equal to drv->state_count and drv->state_count no longer can change during driver's lifetime so the default dev->state_count initialization in cpuidle_enable_device() (called from cpuidle_register_device()) can be used instead. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bartlomiej Zolnierkiewicz authored
acpi_processor_hotplug() calls acpi_processor_setup_cpuidle_cx() without calling acpi_processor_setup_cpuidle_states() first so it is possible that dev->state_count becomes different from drv->state_count (in case of SMP system with unsupported C2/C3 states + enabled CPU hotplug and num_online_cpus() becoming > 1). The driver code assumes that cpuidle core will handle such cases but currently this is untrue (dev->state_count is used only for handling cpuidle state sysfs entries and drv->state_count is used for all other cases) and will not be fixed in the future as dev->state_count is planned to be removed. Fix the issue by checking for the max supported idle state in C2/C3 state's ->enter handler (acpi_idle_enter_simple() for C2/C3 and acpi_idle_enter_bm() for C3 + bm_check flag set) and setting the C1 state (instead of higher states) when needed. Also remove no longer needed max idle state checks from acpi_processor_setup_cpuidle_[states,cx](). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
It is now possible to use the common cpuidle_[un]register() routines (instead of open-coding them) so do it. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
pseries cpuidle driver sets dev->state_count to drv->state_count so the default dev->state_count initialization in cpuidle_enable_device() (called from cpuidle_register_device()) can be used instead. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
The EXYNOS cpuidle driver code assumes that cpuidle core will handle dev->state_count smaller than drv->state_count but currently this is untrue (dev->state_count is used only for handling cpuidle state sysfs entries and drv->state_count is used for all other cases) and will not be fixed in the future as dev->state_count is planned to be removed. Fix the issue by checking for the max supported idle state in AFTR state's ->enter handler (exynos4_enter_lowpower()) and entering AFTR mode only when cores other than CPU0 are offline. Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
- 10 Jan, 2014 1 commit
-
-
Jiang Liu authored
Close avn_cstates array with correct marker to avoid overflow in function intel_idle_cpu_init(). [rjw: The problem was introduced when commit 22e580d0 was merged on top of eba682a5 (intel_idle: shrink states tables).] Fixes: 22e580d0 (intel_idle: Fixed C6 state on Avoton/Rangeley processors) Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
-
- 09 Jan, 2014 1 commit
-
-
Jiang Liu authored
This reverts commit 9d046ccb. Commit 9d046ccb marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb (intel_idle: mark states tables with __initdata tag) Signed-off-by:
-
- 04 Jan, 2014 1 commit
-
-
Linus Torvalds authored
-
- 03 Jan, 2014 2 commits
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull battery fixes from Anton Vorontsov: "Two fixes: - fix build error caused by max17042_battery conversion to the regmap API. - fix kernel oops when booting with wakeup_source_activate enabled" * tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6: max17042_battery: Fix build errors caused by missing REGMAP_I2C config power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and PM fixes and new device IDs from Rafael Wysocki: "These commits, except for one, are regression fixes and the remaining one fixes a divide error leading to a kernel panic. The majority of the regressions fixed here were introduced during the 3.12 cycle, one of them is from this cycle and one is older. Specifics: - VGA switcheroo was broken for some users as a result of the ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some previously ignored hotplug events started to be handled. The fix causes them to be ignored again. - There are two more issues related to cpufreq's suspend/resume handling changes from the 3.12 cycle addressed by Viresh Kumar's fixes. - intel_pstate triggers a divide error in a timer function if the P-state information it needs is missing during initialization. This leads to kernel panics on nested KVM clients and is fixed by failing the initialization cleanly in those cases. - PCI initalization code changes during the 3.9 cycle uncovered BIOS issues related to ACPI wakeup notifications (some BIOSes send them for devices that aren't supposed to support ACPI wakeup). Work around them by installing an ACPI wakeup notify handler for all PCI devices with ACPI support. - The Calxeda cpuilde driver's probe function is tagged as __init, which is incorrect and causes a section mismatch to occur during build. Fix from Andre Przywara removes the __init tag from there. - During the 3.12 cycle ACPIPHP started to print warnings about missing _ADR for devices that legitimately don't have it. Fix from Toshi Kani makes it only print the warnings where they make sense" * tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug intel_pstate: Fail initialization if P-state information is missing ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI cpufreq: preserve user_policy across suspend/resume cpufreq: Clean up after a failing light-weight initialization ACPI / PCI / hotplug: Avoid warning when _ADR not present
-
- 02 Jan, 2014 16 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Unconditionally uninit the MMU on nested vmexit KVM: x86: Fix APIC map calculation after re-enabling
-
Linus Torvalds authored
Merge patches from Andrew Morton: "Ten fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() mm/memory-failure.c: transfer page count from head page to tail page after split thp MAINTAINERS: set up proper record for Xilinx Zynq mm: remove bogus warning in copy_huge_pmd() memcg: fix memcg_size() calculation mm: fix use-after-free in sys_remap_file_pages mm: munlock: fix deadlock in __munlock_pagevec() mm: munlock: fix a bug where THP tail page is encountered
-
Jason Baron authored
The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock. That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with epoll_ctl(b, EPOLL_CTL_DEL, a, x). The deadlock was introduced with commmit 67347fe4 ("epoll: do not take global 'epmutex' for simple topologies"). The acquistion of the ep->mtx for the destination 'ep' was added such that a concurrent EPOLL_CTL_ADD operation would see the correct state of the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links') However, by simply not acquiring the lock, we do not serialize behind the ep->mtx from the add path, and thus may perform a full path check when if we had waited a little longer it may not have been necessary. However, this is a transient state, and performing the full loop checking in this case is not harmful. The important point is that we wouldn't miss doing the full loop checking when required, since EPOLL_CTL_ADD always locks any 'ep's that its operating upon. The reason we don't need to do lock ordering in the add path, is that we are already are holding the global 'epmutex' whenever we do the double lock. Further, the original posting of this patch, which was tested for the intended performance gains, did not perform this additional locking. Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nobuhiro Iwamatsu authored
Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined CONFIG_FLATMEM. When the functions that use the pfn_valid is used in driver module, max_low_pfn and min_low_pfn is to undefined, and fail to build. ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 This patch fix this problem. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Jiang Liu authored
Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: -
Naoya Horiguchi authored
Memory failures on thp tail pages cause kernel panic like below: mce: [Hardware Error]: Machine check events logged MCE exception done on CPU 7 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0 PGD bae42067 PUD ba47d067 PMD 0 Oops: 0000 [#1] SMP ... CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G M O 3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25 ... Call Trace: me_huge_page+0x3e/0x50 memory_failure+0x4bb/0xc20 mce_process_work+0x3e/0x70 process_one_work+0x171/0x420 worker_thread+0x11b/0x3a0 ? manage_workers.isra.25+0x2b0/0x2b0 kthread+0xe4/0x100 ? kthread_create_on_node+0x190/0x190 ret_from_fork+0x7c/0xb0 ? kthread_create_on_node+0x190/0x190 ... RIP dequeue_hwpoisoned_huge_page+0x131/0x1e0 CR2: 0000000000000058 The reasoning of this problem is shown below: - when we have a memory error on a thp tail page, the memory error handler grabs a refcount of the head page to keep the thp under us. - Before unmapping the error page from processes, we split the thp, where page refcounts of both of head/tail pages don't change. - Then we call try_to_unmap() over the error page (which was a tail page before). We didn't pin the error page to handle the memory error, this error page is freed and removed from LRU list. - We never have the error page on LRU list, so the first page state check returns "unknown page," then we move to the second check with the saved page flag. - The saved page flag have PG_tail set, so the second page state check returns "hugepage." - We call me_huge_page() for freed error page, then we hit the above panic. The root cause is that we didn't move refcount from the head page to the tail page after split thp. So this patch suggests to do this. This panic was introduced by commit 524fca1e ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages"). Note that we did have the same refcount problem before this commit, but it was just ignored because we had only first page state check which returned "unknown page." The commit changed the refcount problem from "doesn't work" to "kernel panic." Signed-off-by:Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by:
-
Michal Simek authored
Setup correct zynq entry. - Add missing cadence_ttc_timer maintainership - Add zynq wildcard - Add xilinx wildcard Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Mel Gorman authored
Sasha Levin reported the following warning being triggered WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0() Call Trace: copy_huge_pmd+0x145/0x3a0 copy_page_range+0x3f2/0x560 dup_mmap+0x2c9/0x3d0 dup_mm+0xad/0x150 copy_process+0xa68/0x12e0 do_fork+0x96/0x270 SyS_clone+0x16/0x20 stub_clone+0x69/0x90 This warning was introduced by "mm: numa: Avoid unnecessary disruption of NUMA hinting during migration" for paranoia reasons but the warning is bogus. I was thinking of parallel races between NUMA hinting faults and forks but this warning would also be triggered by a parallel reclaim splitting a THP during a fork. Remote the bogus warning. Signed-off-by:Mel Gorman <mgorman@suse.de> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
-
Vladimir Davydov authored
The mem_cgroup structure contains nr_node_ids pointers to mem_cgroup_per_node objects, not the objects themselves. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Rik van Riel authored
remap_file_pages calls mmap_region, which may merge the VMA with other existing VMAs, and free "vma". This can lead to a use-after-free bug. Avoid the bug by remembering vm_flags before calling mmap_region, and not trying to dereference vma later. Signed-off-by:
Rik van Riel <riel@redhat.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Kees Cook <keescook@chromium.org> Cc: Michel Lespinasse <walken@google.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
Commit 7225522b ("mm: munlock: batch non-THP page isolation and munlock+putback using pagevec" introduced __munlock_pagevec() to speed up munlock by holding lru_lock over multiple isolated pages. Pages that fail to be isolated are put_page()d immediately, also within the lock. This can lead to deadlock when __munlock_pagevec() becomes the holder of the last page pin and put_page() leads to __page_cache_release() which also locks lru_lock. The deadlock has been observed by Sasha Levin using trinity. This patch avoids the deadlock by deferring put_page() operations until lru_lock is released. Another pagevec (which is also used by later phases of the function is reused to gather the pages for put_page() operation. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
-
Vlastimil Babka authored
Since commit ff6a6da6 ("mm: accelerate munlock() treatment of THP pages") munlock skips tail pages of a munlocked THP page. However, when the head page already has PageMlocked unset, it will not skip the tail pages. Commit 7225522b ("mm: munlock: batch non-THP page isolation and munlock+putback using pagevec") has added a PageTransHuge() check which contains VM_BUG_ON(PageTail(page)). Sasha Levin found this triggered using trinity, on the first tail page of a THP page without PageMlocked flag. This patch fixes the issue by skipping tail pages also in the case when PageMlocked flag is unset. There is still a possibility of race with THP page split between clearing PageMlocked and determining how many pages to skip. The race might result in former tail pages not being skipped, which is however no longer a bug, as during the skip the PageTail flags are cleared. However this race also affects correctness of NR_MLOCK accounting, which is to be fixed in a separate patch. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull GFS2 fixes from Steven Whitehouse: "Here is a set of small fixes for GFS2. There is a fix to drop s_umount which is copied in from the core vfs, two patches relate to a hard to hit "use after free" and memory leak. Two patches related to using DIO and buffered I/O on the same file to ensure correct operation in relation to glock state changes. The final patch adds an RCU read lock to ensure correct locking on an error path" * tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Fix unsafe dereference in dump_holder() GFS2: Wait for async DIO in glock state changes GFS2: Fix incorrect invalidation for DIO/buffered I/O GFS2: Fix slab memory leak in gfs2_bufdata GFS2: Fix use-after-free race when calling gfs2_remove_from_ail GFS2: don't hold s_umount over blkdev_put
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change. A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of memory for the per-cpu arrays. Under z/VM the maximum number of CPUs is 64, the code now limits the possible cpu mask to 64 if running under z/VM" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: obtain function handle in hotplug notifier s390/3270: fix allocation of tty3270_screen structure s390/smp: improve setup of possible cpu mask
-
Jan Kiszka authored
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if one guest VCPU manipulates the page of another VCPU in L2, we may be fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in nested state. That can crash the host later on if nested_ept_get_cr3 is invoked while L1 already left vmxon and nested.current_vmcs12 became NULL therefore. Cc: stable@kernel.org Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Tetsuo Handa authored
GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that RCU read lock is held when using task_struct returned from pid_task(). Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com>
-
- 01 Jan, 2014 4 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull radeon drm fixes from Dave Airlie: "Just piping a bunch of fixes from pre-xmas from Alex for radeon, all either fix bad hw setup issues or regressions" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Bump version for CIK DCE tiling fix drm/radeon: set correct number of banks for CIK chips in DCE drm/radeon: set correct pipe config for Hawaii in DCE drm/radeon: expose render backend mask to the userspace drm/radeon: fix render backend setup for SI and CIK drm/radeon: 0x9649 is SUMO2 not SUMO drm/radeon: fix UVD 256MB check
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a build error on ARM that was introduced in 3.13-rc1" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ixp4xx - Fix kernel compile error
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Radeon fixes, Christmas eve edition. Fix incorrect family for 0x9649 which lead to bogus rendering, tiling and RB fixes for SI and CIK, and a UVD fix. * 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Bump version for CIK DCE tiling fix drm/radeon: set correct number of banks for CIK chips in DCE drm/radeon: set correct pipe config for Hawaii in DCE drm/radeon: expose render backend mask to the userspace drm/radeon: fix render backend setup for SI and CIK drm/radeon: 0x9649 is SUMO2 not SUMO drm/radeon: fix UVD 256MB check
-
Krzysztof Hałasa authored
drivers/crypto/ixp4xx_crypto.c: In function 'ixp_module_init': drivers/crypto/ixp4xx_crypto.c:1419:2: error: 'dev' undeclared (first use in this function) Now builds. Not tested on real hw. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 31 Dec, 2013 8 commits
-
-
Rafael J. Wysocki authored
* pm-cpufreq: intel_pstate: Fail initialization if P-state information is missing cpufreq: preserve user_policy across suspend/resume cpufreq: Clean up after a failing light-weight initialization * pm-cpuidle: ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
-
Rafael J. Wysocki authored
Merge branch 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux into pm-cpuidle Pull ARM cpuidle fixes for v3.13 from Daniel Lezcano. * 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux: ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
-
Rafael J. Wysocki authored
* acpi-pci-pm: PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI * acpi-pci-hotplug: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug ACPI / PCI / hotplug: Avoid warning when _ADR not present
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "A fix for a panic in gpio-keys driver when set up with absolute events, a fixup to the new zforce driver and a new keycode definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: allocate absinfo data when setting ABS capability Input: define KEY_WWAN for Wireless WAN Input: zforce - fix possible driver hang during suspend
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A few small cifs fixes including two for stable, and fixing a regression introduced by the VFS change to file create" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: cifs: set FILE_CREATED cifs: We do not drop reference to tlink in CIFSCheckMFSymlink() Add missing end of line termination to some cifs messages
-
Dmitry Torokhov authored
We need to make sure we allocate absinfo data when we are setting one of EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this event. Rested-by:
Paul Cercueil <pcercuei@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rafael J. Wysocki authored
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcd (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891Reported-and-tested-by:
Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by:
Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Rafael J. Wysocki authored
If pstate.current_pstate is 0 after the initial intel_pstate_get_cpu_pstates(), this means that we were unable to obtain any useful P-state information and there is no reason to continue, so free memory and return an error in that case. This fixes the following divide error occuring in a nested KVM guest: Intel P-state driver initializing. Intel pstate controlling: cpu 0 cpufreq: __cpufreq_add_dev: ->get() failed divide error: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88001ea20000 ti: ffff88001e9bc000 task.ti: ffff88001e9bc000 RIP: 0010:[<ffffffff815c551d>] [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP: 0000:ffff88001ee03e18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88001a454348 RCX: 0000000000006100 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001ee03e38 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88001ea20000 R11: 0000000000000000 R12: 00000c0a1ea20000 R13: 1ea200001ea20000 R14: ffffffff815c5400 R15: ffff88001a454348 FS: 0000000000000000(0000) GS:ffff88001ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000006f0 Stack: fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100 ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40 ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000 Call Trace: <IRQ> [<ffffffff81083e9a>] call_timer_fn+0x8a/0x310 [<ffffffff81083e15>] ? call_timer_fn+0x5/0x310 [<ffffffff815c5400>] ? pid_param_set+0x130/0x130 [<ffffffff81084354>] run_timer_softirq+0x234/0x380 [<ffffffff8107aee4>] __do_softirq+0x104/0x430 [<ffffffff8107b5fd>] irq_exit+0xcd/0xe0 [<ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80 <EOI> [<ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0 [<ffffffff81757719>] printk+0x67/0x69 [<ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0 [<ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20 [<ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0 [<ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210 [<ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be [<ffffffff81761e3e>] ? mutex_unlock+0xe/0x10 [<ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0 [<ffffffff8109dbf5>] ? parse_args+0x225/0x3f0 [<ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287 [<ffffffff81f638d0>] ? do_early_param+0x88/0x88 [<ffffffff8174b530>] ? rest_init+0x150/0x150 [<ffffffff8174b53e>] kernel_init+0xe/0x130 [<ffffffff8176e27c>] ret_from_fork+0x7c/0xb0 [<ffffffff8174b530>] ? rest_init+0x150/0x150 Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89 RIP [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP <ffff88001ee03e18> ---[ end trace f166110ed22cc37a ]--- Kernel panic - not syncing: Fatal exception in interrupt Reported-and-tested-by:
Kashyap Chamarthy <kchamart@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
- 30 Dec, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix 2 regressions found on PPC - Allow NULL ptr in unflatten_and_copy_device_tree - Update my email address * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: Update Rob Herring's email address of/irq: Fix device_node refcount in of_irq_parse_raw() of/Kconfig: Spelling s/one/once/ Revert "of/address: Handle #address-cells > 2 specially" of: Fix NULL dereference in unflatten_and_copy()
-
Jan Kiszka authored
Update arch.apic_base before triggering recalculate_apic_map. Otherwise the recalculation will work against the previous state of the APIC and will fail to build the correct map when an APIC is hardware-enabled again. This fixes a regression of 1e08ec4a. Cc: stable@vger.kernel.org Signed-off-by:
-
