- 09 Dec, 2020 1 commit
-
-
Tian Tao authored
switch to using devm_add_action_or_reset() instead of devm_add_action. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1607303055-5199-1-git-send-email-tiantao6@hisilicon.com
-
- 08 Dec, 2020 26 commits
-
-
Sam Ravnborg authored
Coverity reported: Useless call (USELESS_CALL) side_effect_free: Calling SiS_GetResInfo(SiS_Pr, ModeNo, ModeIdIndex) is only useful for its return value, which is ignored. And this is correct - so drop the call. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Reported-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Useless call") Acked-by:
-
Sam Ravnborg authored
The controlfb driver has a number of dummy defines for IO operations. They were introduced in commit a07a63b0 ("video: fbdev: controlfb: add COMPILE_TEST support"). The write variants did not use their value parameter in the dummy versions, resulting in set but not used warnings. Fix this by adding "(void)val" to silence the compiler. Signed-off-by:
-
Sam Ravnborg authored
screen_pitch was asssigned a value which was never used. Drop it to fix the warning Signed-off-by:
-
Sam Ravnborg authored
The variable "x" was set but never used. Drop the redundant assignments. Signed-off-by:
-
Sam Ravnborg authored
The goldfish_fb_acpi_match table is only used with ACPI enabled. Ifdef it out unless it is needed. This is a similar fix to what other acpi drivers do. Signed-off-by:
-
Sam Ravnborg authored
Include own header to fix "function not declared" warnings. Signed-off-by:
-
Sam Ravnborg authored
Add missing parameter and drop parameter that is not present Signed-off-by:
-
Sam Ravnborg authored
Fix kernel-doc warnings caused by a wrong parameter name blank_mode => blank Signed-off-by:
-
Sam Ravnborg authored
Fix W=1 warning by deleting unused local variable. v2: - Updated subject (Lee) v3: - Return early in case of an error (Thomas) Signed-off-by:
-
Sam Ravnborg authored
Fix a few W=1 warnings about unused assignments. Drop the unused error code. v2: - Subject updated (Lee) Signed-off-by:
-
Sam Ravnborg authored
Fix kernel-doc warnings reported when using W=1 v2: - Improve subject (Lee) v3: - Add RETURNS documentation (Thomas) v4: - Use Return: not RETURNS (Randy) Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201206205132.GA1869030@ravnborg.org
-
Sam Ravnborg authored
Fix kernel-doc comments. v2: - Updated subject (Lee) v3: - Add space after ':' (Randy) - Fix name of function in comment Signed-off-by:
-
Paul Cercueil authored
Add support for 24-bit panels that are connected through a 8-bit bus and use delta-RGB, which means a RGB pixel ordering on odd lines, and a GBR pixel ordering on even lines. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
-
Paul Cercueil authored
The LCD controller expects timing values in dot-clock ticks, which is 3x the timing values in pixels when using a 3x8-bit display; but it will count the display area size in pixels either way. Go figure. Signed-off-by:
-
Paul Cercueil authored
The adjusted_mode->crtc_* fields contain the values adjusted for the hardware, and are the ones that should be written to the registers. Signed-off-by:
-
Luben Tuikov authored
The job done callback is called from various places, in two ways: in job done role, and as a fence callback role. Essentialize the callback to an atom function to just complete the job, and into a second function as a prototype of fence callback which calls to complete the job. This is used in latter patches by the completion code. Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/405574/ Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Luben Tuikov authored
Rename "ring_mirror_list" to "pending_list", to describe what something is, not what it does, how it's used, or how the hardware implements it. This also abstracts the actual hardware implementation, i.e. how the low-level driver communicates with the device it drives, ring, CAM, etc., shouldn't be exposed to DRM. The pending_list keeps jobs submitted, which are out of our control. Usually this means they are pending execution status in hardware, but the latter definition is a more general (inclusive) definition. Signed-off-by:
-
Luben Tuikov authored
Rename "node" to "list" in struct drm_sched_job, in order to make it consistent with what we see being used throughout gpu_scheduler.h, for instance in struct drm_sched_entity, as well as the rest of DRM and the kernel. Signed-off-by:
-
Tomi Valkeinen authored
Add DP support to display-connector driver. The driver will support HPD via a GPIO and DP PWR. DP PWR will be enabled at probe, which is not optimal, but I'm not sure what would be a good place to enable and disable DP PWR. Perhaps attach/detach, but I don't know if enabling HW is something that attach is supposed to do. In any case, I don't think there's much difference in power consumption between the version in this patch and enabling the regulator later: if the driver probes, supposedly it will attach very soon afterwards, and we need to enable the DP PWR as soon as possible. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130112919.241054-3-tomi.valkeinen@ti.com
-
Tomi Valkeinen authored
Add binding for DisplayPort connector. A few notes: * Similar to hdmi-connector, it has hpd-gpios as an optional property, as the HPD could also be handled by, e.g., the DP bridge. * dp-pwr-supply, which provides 3.3V on DP_PWR pin, is optional, as it is not strictly required: standard DP cables do not even have the pin connected. * Connector type. Full size and mini connectors are identical except for the connector size and form, so I believe there is no functional need for this property. But similar to 'label' property, it might be used to present information about the connector to the userspace. * No eDP. There's really no "eDP connector", as it's always a custom made connection between the DP and the DP panel, although the eDP spec does offer a few suggested pin setups. So possibly there is no need for edp-connector binding, but even if there is, I don't want to guess what it could look like, and could it be part of the dp-connector binding. * No DP++. I'm not familiar with DP++. DP++ might need an i2c bus added to the bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201130112919.241054-2-tomi.valkeinen@ti.com
-
Guido Günther authored
This panel from Shenzhen Yashi Changhua Intelligent Technology Co uses the same driver IC but a different LCD. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Guido Günther authored
Add prefix for Shenzhen Yashi Changhua Intelligent Technology Co., Ltd. Signed-off-by:
-
Guido Günther authored
The panel uses the same driver IC and has the same resolution but a slightly different default mode. It seems it can work with the same init sequence. Signed-off-by:
-
Guido Günther authored
This can be used to use different modes for differnt panels via OF device match. Signed-off-by:
-
Guido Günther authored
We've seen some (non permanent) burn in and bad white balance on some of the panels. Adding this bit from a vendor supplied sequence fixes it. Fixes: 72967d56 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by:
-
Guido Günther authored
Less code and easier probe deferral debugging. Signed-off-by:
-
- 07 Dec, 2020 11 commits
-
-
Simon Ser authored
Fix one missing letter, and one duplicate struct field reference. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Neil Armstrong authored
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. The init values was taken from the vendor source tree, comments were added to the know values but most of the init table is undocumented. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
This add the bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. Signed-off-by:
-
Dave Stevenson authored
BCM2711 DSI1 doesn't have the issue with the ARM not being able to write to the registers, therefore remove the DMA workaround for that compatible string. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxime@cerno.tech
-
Dave Stevenson authored
DSI1 on BCM2711 doesn't require the DMA workaround that is used on BCM2835/6/7, therefore it needs a new compatible string. Signed-off-by:
-
Dave Stevenson authored
DSI0 was partially supported, but didn't register with the main driver, and the code was inconsistent as to whether it checked port == 0 or port == 1. Add compatible string and other support to make it consistent. Signed-off-by:
-
Maxime Ripard authored
Most of the differences between DSI0 and DSI1 are handled through the ID. However, the BCM2711 DSI is going to introduce one more variable to the mix and will break some expectations of the earlier, simpler, test. Let's add a variant structure that will address most of the differences between those three controllers. Reviewed-by:
-
Maxime Ripard authored
The DSI clocks setup function has been using an array to store the clock name of either the DSI0 or DSI1 blocks, using the port ID to choose the proper one. Let's switch to an snprintf call to do the same thing and simplify the array a bit. Reviewed-by:
-
Dave Stevenson authored
The DSI1_PHY_AFEC0_PD_DLANE1 and DSI1_PHY_AFEC0_PD_DLANE3 register definitions were swapped, so trying to use more than a single data lane failed as lane 1 would get powered down. (In theory a 4 lane device would work as all lanes would remain powered). Correct the definitions. Signed-off-by:
-
Maxime Ripard authored
That pointer isn't used anywhere, so there's no point in keeping it. Reviewed-by:
-
Maxime Ripard authored
The infoframes are sent at a regular interval as a data island packet, so we don't need to wait for them to be sent when we're setting them up. However, we do need to poll when we're enabling since the we can't update the packet RAM until it has been sent. Let's add a boolean flag to tell whether we want to poll or not to support both cases. Suggested-by:
-
- 05 Dec, 2020 2 commits
-
-
Linus Walleij authored
The DSI version of the panel behaved instable and close scrutiny of the vendor driver from the Samsung GT-S8190 shows a different initialization sequence for the DSI mode panel than the DPI mode panel. Make the initialization depend on whether we are in DSI or DPI mode and handle the differences. After this the panel on the GT-I8190 becomes much more stable. Also spell out some more custom DCS commands found in the vendor source code to cut down a bit on magic where we can. Fixes: f0aee45f ("drm/panel: s6e63m0: Fix init sequence") Signed-off-by:
-
Linus Walleij authored
This moves the MCDE bindings over to using the YAML schema to describe the ST-Ericsson MCDE display controller, making use of the generic DSI controller schema. In the process we correct an error in the old text bindings: the clocks for the SDI host controllers were specified as part of the main MCDE component while they should be specified in the DSI host controller subnodes. This was a leftover from an earlier iteration of the first patch series adding the MCDE. We also add the "port" node, we will use this when adding LCD panels using the direct parallel interface DPI instead of DSI. Signed-off-by:
-
