- 11 Jul, 2017 5 commits
-
-
Nicholas Bellinger authored
This patch re-introduces part of a long standing login workaround that was recently dropped by: commit 1c99de98 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Apr 2 13:36:44 2017 -0700 iscsi-target: Drop work-around for legacy GlobalSAN initiator Namely, the workaround for FirstBurstLength ended up being required by Mellanox Flexboot PXE boot ROMs as reported by Robert. So this patch re-adds the work-around for FirstBurstLength within iscsi_check_proposer_for_optional_reply(), and makes the key optional to respond when the initiator does not propose, nor respond to it. Also as requested by Arun, this patch introduces a new TPG attribute named 'login_keys_workaround' that controls the use of both the FirstBurstLength workaround, as well as the two other existing workarounds for gPXE iSCSI boot client. By default, the workaround is enabled with login_keys_workaround=1, since Mellanox FlexBoot requires it, and Arun has verified the Qlogic MSFT initiator already proposes FirstBurstLength, so it's uneffected by this re-adding this part of the original work-around. Reported-by:
Robert LeBlanc <robert@leblancnet.us> Cc: Robert LeBlanc <robert@leblancnet.us> Reviewed-by:
Arun Easi <arun.easi@cavium.com> Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This reverts commit 5f572526. As reported by Pascal here: http://www.spinics.net/lists/target-devel/msg15808.html there still appears to be another issue related to this change to drop the original bogus tcm_qla2xxx_free_cmd() usage from tcm_qla2xxx_handle_data_work() and tcm_qla2xxx_aborted_task(). So revert this for now, until Pascal can verify with further debug in place to understand what's going on. Reported-by:
Pascal de Bruijn <p.debruijn@unilogic.nl> Cc: Pascal de Bruijn <p.debruijn@unilogic.nl> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Quinn Tran <quinn.tran@cavium.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Xiubo Li authored
Remove useless blank line and code and at the same time add one error path to catch the errors. Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by:
-
Xiubo Li authored
For all the entries allocated from the ring cmd area, the memory is something like the stack memory, which will always reserve the old data, so the entry->req.iov_bidi_cnt maybe none zero. On some environments, the crash could be reproduce very easy and some not. The following is the crash core trace as reported by Damien: [ 240.143969] CPU: 0 PID: 1285 Comm: iscsi_trx Not tainted 4.12.0-rc1+ #3 [ 240.150607] Hardware name: ASUS All Series/H87-PRO, BIOS 2104 10/28/2014 [ 240.157331] task: ffff8807de4f5800 task.stack: ffffc900047dc000 [ 240.163270] RIP: 0010:memcpy_erms+0x6/0x10 [ 240.167377] RSP: 0018:ffffc900047dfc68 EFLAGS: 00010202 [ 240.172621] RAX: ffffc9065db85540 RBX: ffff8807f7980000 RCX: 0000000000000010 [ 240.179771] RDX: 0000000000000010 RSI: ffff8807de574fe0 RDI: ffffc9065db85540 [ 240.186930] RBP: ffffc900047dfd30 R08: ffff8807de41b000 R09: 0000000000000000 [ 240.194088] R10: 0000000000000040 R11: ffff8807e9b726f0 R12: 00000006565726b0 [ 240.201246] R13: ffffc90007612ea0 R14: 000000065657d540 R15: 0000000000000000 [ 240.208397] FS: 0000000000000000(0000) GS:ffff88081fa00000(0000) knlGS:0000000000000000 [ 240.216510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.222280] CR2: ffffc9065db85540 CR3: 0000000001c0f000 CR4: 00000000001406f0 [ 240.229430] Call Trace: [ 240.231887] ? tcmu_queue_cmd+0x83c/0xa80 [ 240.235916] ? target_check_reservation+0xcd/0x6f0 [ 240.240725] __target_execute_cmd+0x27/0xa0 [ 240.244918] target_execute_cmd+0x232/0x2c0 [ 240.249124] ? __local_bh_enable_ip+0x64/0xa0 [ 240.253499] iscsit_execute_cmd+0x20d/0x270 [ 240.257693] iscsit_sequence_cmd+0x110/0x190 [ 240.261985] iscsit_get_rx_pdu+0x360/0xc80 [ 240.267565] ? iscsi_target_rx_thread+0x54/0xd0 [ 240.273571] iscsi_target_rx_thread+0x9a/0xd0 [ 240.279413] kthread+0x113/0x150 [ 240.284120] ? iscsi_target_tx_thread+0x1e0/0x1e0 [ 240.290297] ? kthread_create_on_node+0x40/0x40 [ 240.296297] ret_from_fork+0x2e/0x40 [ 240.301332] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 240.321751] RIP: memcpy_erms+0x6/0x10 RSP: ffffc900047dfc68 [ 240.328838] CR2: ffffc9065db85540 [ 240.333667] ---[ end trace b7e5354cfb54d08b ]--- To fix this, just memset all the entry memory before using it, and also to be more readable we adjust the bidi code. Fixed: fe25cc34(tcmu: Recalculate the tcmu_cmd size to save cmd area memories) Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Damien Le Moal <damien.lemoal@wdc.com> Tested-by:
-
Mike Christie authored
Older kernels could crash or hang if the user write/read some ALUA files with pscsi and tcmu backends. This patch exports if LIO supports executing PGR and ALUA scsi commands/checks for the se_device, so userspace can easily test. Signed-off-by:
-
- 10 Jul, 2017 3 commits
-
-
Tang Wenji authored
The sense reason should be TCM_PARAMETER_LIST_LENGTH_ERROR when parmeter length error. Also the cdb[1] & 0x1f has been assigned to local variable sa, so use sa instead of it. Signed-off-by:
Tang Wenji <tang.wenji@zte.com.cn> Signed-off-by:
-
Tang Wenji authored
The cmd size should be 4bytes form byte5 to byte8 when CDB opcode is PERSISTENT_RESERVE_OUT in SPC3 and SPC4 (Also fix up the same in spc_parse_cdb - MNC) Signed-off-by:
-
Bryant G. Ly authored
Currently when there is a reconfig, the uio_info->name does not get updated to reflect the change in the dev_config name change. On restart tcmu-runner there will be a mismatch between the dev_config string in uio and the tcmu structure that contains the string. When this occurs it'll reload the one in uio and you lose the reconfigured device path. v2: Created a helper function for the updating of uio_info Signed-off-by:
-
- 07 Jul, 2017 32 commits
-
-
Damien Le Moal authored
TYPE_ZBC host managed zoned block devices are also block devices despite the non-standard device type (14h). Handle them similarly to regular TYPE_DISK devices. Signed-off-by:
-
Damien Le Moal authored
Add WRITE_VERIFY_32 definition to scsi prototypes and use this macro definition isntead of the hard coded value. (Drop WRITE_VERIFY_16 that's already part of another patch - nab) Signed-off-by:
-
Mike Christie authored
If the scsi status was not SAM_STAT_GOOD or there was no transport sense, we would ignore the scsi status and do a generic not ready LUN communication failure check condition failure. The problem is that LUN COMM failure is treated as a hard error sometimes and will cause apps to get IO errors instead of the OS's SCSI layer retrying. For example, the tcmu daemon will return SAM_STAT_QUEUE_FULL when memory runs low and can still make progress but wants the initiator to reduce the work load. Windows will fail this error directly the app instead of retrying. This patch is based on Nick's "target/iblock: Use -EAGAIN/-ENOMEM to propigate SAM BUSY/TASK_SET_FULL" patch here: http://comments.gmane.org/gmane.linux.scsi.target.devel/11301 but instead of only setting SAM_STAT_GOOD, SAM_STAT_TASK_SET_FULL and SAM_STAT_BUSY as success, it sets all non check condition status as success so they are passed back to the initiator, so passthrough type backends can return all SCSI status codes. Since only passthrough uses this, I was not sure if we wanted to add checks for non-passthrough and specific codes. Signed-off-by:
-
Mike Christie authored
transport_complete is no longer used, so drop the code. Signed-off-by:
-
Mike Christie authored
This patch performs the pscsi_transport_complete operations from pscsi_req_done. It looks like the only difference the transport_complete callout provides is that it is called under t_state_lock which seems to only be needed for the SCF_TRANSPORT_TASK_SENSE bit handling. We can now use transport_copy_sense_to_cmd to handle the se_cmd sense bits, and we can then drop the code where we have to copy the request info to the pscsi_plugin_task for transport_complete use. Signed-off-by:
-
Mike Christie authored
We were just copying the sense to the cmd sense_buffer and did not implement a transport_complete or set the SCF_TRANSPORT_TASK_SENSE, so the sense was ignored. Signed-off-by:
-
Mike Christie authored
This adds a helper to copy sense from backend module buffer to the se_cmd's sense buffer. Signed-off-by:
-
Mike Christie authored
tcmu needs to pass raw sense to target_complete_cmd, but a a transport_complete callout is akward to implement for it. This moves the check for SCF_TRANSPORT_TASK_SENSE so any backend can pass sense. Signed-off-by:
-
Colin Ian King authored
Variables device_mutex and device_list static are local to the source, so make them static. Cleans up sparse warnings: "symbol 'device_list' was not declared. Should it be static?" "symbol 'device_mutex' was not declared. Should it be static?" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Xiubo Li authored
When feeding the tcmu's cmd ring, we need to flush the dcache page for the cmd entry to make sure these kernel stores are visible to user space mappings of that page. For the none PAD cmd entry, this will be flushed at the end of the tcmu_queue_cmd_ring(). Signed-off-by:
-
Mike Christie authored
If the uio device is open and closed multiple times, the kref count will be off due to tcmu_release getting called multiple times for each close. This patch integrates Wenji Tang's patch to add a kref_get on open that now matches the kref_put done on tcmu_release and adds a kref_put in tcmu_destroy_device to match the kref_get done in succesful tcmu_configure_device calls. Signed-off-by:
-
Mike Christie authored
destroy_device is only called if we have successfully run configure_device, so drop the duplicate tcmu_dev_configured check. Signed-off-by:
-
Mike Christie authored
g_device_list is no longer needed because we now use the idr code for lookups and seaches. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Mike Christie authored
This converts the xcopy code to use the idr helper. The next patch will drop the g_device_list and make g_device_mutex local to the target_core_device.c file. Signed-off-by:
-
Mike Christie authored
This adds a wrapper around idr_for_each so the xcopy code can loop over the devices in the next patch. Signed-off-by:
-
Mike Christie authored
This makes the device add, del reconfig operations sync. It fixes the issue where for add and reconfig, we do not know if userspace successfully completely the operation, so we leave invalid kernel structs or report incorrect status for the config/reconfig operations. Signed-off-by:
-
Mike Christie authored
This adds a helper to find a se_device by dev_index. It will be used in the next patches so tcmu's netlink interface can execute commands on specific devices. Signed-off-by:
-
Mike Christie authored
In the next patches we will add tcmu netlink support that allows userspace to send commands to target_core_user. To execute operations on a se_device/tcmu_dev we need to be able to look up a dev by any old id. This patch replaces the se_device->dev_index with a idr created id. The next patches will also remove the g_device_list and replace it with the idr. Signed-off-by:
-
Mike Christie authored
With this patch free_device is now used to free what is allocated in the alloc_device callback and destroy_device tears down the resources that are setup in the configure_device callback. This patch will be needed in the next patch where tcmu needs to be able to look up the device in the destroy callback. Signed-off-by:
-
Mike Christie authored
1. TCMU_ATTR_TYPE is too generic when it describes only the reconfiguration type, so rename to TCMU_ATTR_RECONFIG_TYPE. 2. Only return the reconfig type when it is a TCMU_CMD_RECONFIG_DEVICE command. 3. CONFIG_* type is not needed. We can pass the value along with an ATTR to userspace, so it does not need to read sysfs/configfs. 4. Fix leak in tcmu_dev_path_store and rename to dev_config to reflect it is more than just a path that can be changed. 6. Don't update kernel struct value if netlink sending fails. Signed-off-by:
-
Nicholas Bellinger authored
This patch drops two incorrect usages of tcm_qla2xxx_free_cmd() during TMR ABORT within tcm_qla2xxx_handle_data_work() and tcm_qla2xxx_aborted_task(), which where attempting to dispatch into workqueue context to do tcm_qla2xxx_complete_free() and subsequently invoke transport_generic_free_cmd(). This is incorrect because during TMR ABORT target-core will drop the outstanding se_cmd->cmd_kref references once it has quiesced the se_cmd via transport_wait_for_tasks(), and in the case of qla2xxx it should not attempt to do it's own transport_generic_free_cmd() once the abort has occured. As reported by Pascal, this was originally manifesting as a BUG_ON(cmd->cmd_in_wq) in qlt_free_cmd() during TMR ABORT, with a LIO backend that had sufficently high enough WRITE latency to trigger a host side TMR ABORT_TASK. In addition, for the case in tcm_qla2xxx_write_pending_status() and tcm_qla2xxx_handle_data_work() that waits for outstanding FCP WRITE data transfer to complete before preceeding with a TMR ABORT, avoid se_cmd->t_transport_stop_comp that is already used by transport_wait_for_tasks() and use a qla2xxx internal struct completion instead. Reported-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Quinn Tran <quinn.tran@cavium.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Nicholas Bellinger authored
This patch fixes a NULL pointer dereference in isert_login_recv_done() of isert_conn->cm_id due to isert_cma_handler() -> isert_connect_error() resetting isert_conn->cm_id = NULL during a failed login attempt. As per Sagi, we will always see the completion of all recv wrs posted on the qp (given that we assigned a ->done handler), this is a FLUSH error completion, we just don't get to verify that because we deref NULL before. The issue here, was the assumption that dereferencing the connection cm_id is always safe, which is not true since: commit 4a579da2 Author: Sagi Grimberg <sagig@mellanox.com> Date: Sun Mar 29 15:52:04 2015 +0300 iser-target: Fix possible deadlock in RDMA_CM connection error As I see it, we have a direct reference to the isert_device from isert_conn which is the one-liner fix that we actually need like we do in isert_rdma_read_done() and isert_rdma_write_done(). Reported-by:Andrea Righi <righi.andrea@gmail.com> Tested-by:
Sagi Grimberg <sagi@grimberg.me> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Colin Ian King authored
The array tcmu_attrib_attrs does not need to be in global scope, so make it static. Cleans up sparse warning: "symbol 'tcmu_attrib_attrs' was not declared. Should it be static?" Signed-off-by:
-
Xiubo Li authored
Because the unmap code just after the schdule() returned may take a long time and if the kthread_stop() is fired just when in this routine, the module removal maybe stuck too. Signed-off-by:
-
Jiang Yi authored
This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak, that would be triggered during normal se_cmd shutdown or abort via __transport_wait_for_tasks(). This would occur because target_complete_cmd() would catch this early and do complete_all(&cmd->t_transport_stop_comp), but since target_complete_ok_work() or target_complete_failure_work() are never called to invoke se_cmd->transport_complete_callback(), the COMPARE_AND_WRITE specific callbacks never release caw_sem. To address this special case, go ahead and release caw_sem directly from target_complete_cmd(). (Remove '&& success' from check, to release caw_sem regardless of scsi_status - nab) Signed-off-by:
Jiang Yi <jiangyilism@gmail.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by:
-
Bryant G. Ly authored
This patch adds more info about the attribute being changed, so that usersapce can easily figure out what is happening. Signed-off-by:
-
Bryant G. Ly authored
This allows for userspace to change the device path after it has been created. Thus giving the user the ability to change the path. The use case for this is to allow for virtual optical to have media change. Signed-off-by:
-
Bryant G. Ly authored
Allow tcmu backstores to be able to set the device size after it has been configured via set attribute. Part of support in userspace to support certain backstores changing device size. Signed-off-by:
-
Bryant G. Ly authored
This gives tcmu the ability to handle events that can cause reconfiguration, such as resize, path changes, write_cache, etc... Signed-off-by:
-
Bryant G. Ly authored
This will enable the toggling of write_cache in tcmu through targetcli-fb Signed-off-by:
-
Bryant G. Ly authored
ibmvscsis always returned 0 for the tpg/tag, since it did not parse the value passed in by the user. When functions like ALUA members exports the value, it will be incorrect because targetcli/rtslib starts the tpg numbering at 1. Signed-off-by:
-
Bart Van Assche authored
If an iSCSI command is rejected before iscsit_process_scsi_cmd() is called, .reject_reason is set but iscsit_process_scsi_cmd() is not called. This means that the "if (cmd->reject_reason) ..." code in this function can be removed without changing the behavior of this function. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
-
