- 12 Jan, 2012 3 commits
-
-
Glauber Costa authored
The logic of the current code is that whenever we destroy a cgroup that had its limit set (set meaning different than maximum), we should decrement the jump_label counter. Otherwise we assume it was never incremented. But what the code actually does is test for RES_USAGE instead of RES_LIMIT. Usage being different than maximum is likely to be true most of the time. The effect of this is that the key must become negative, and since the jump_label test says: !!atomic_read(&key->enabled); we'll have jump_labels still on when no one else is using this functionality. Signed-off-by:
Glauber Costa <glommer@parallels.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit a9b3cd7f (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Jan, 2012 26 commits
-
-
Pavel Emelyanov authored
Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxim Uvarov authored
No need to lock soft irqs under bond_alb_xmit() which already has softirq disabled. Changes: 1. add non-bh/bh version to tlb_clear_slave() 2. represent BH and non BH hash table locks _lock_rx_hashtbl_bh/_unlock_rx_hashtbl_bh _lock_rx_hashtbl/_unlock_rx_hashtbl _lock_tx_hashtbl_bh/_unlock_tx_hashtbl_bh _lock_tx_hashtbl/_unlock_tx_hashtbl Signed-off-by:
Maxim Uvarov <maxim.uvarov@oracle.com> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stanislaw Gruszka authored
Since: commit 816c04fe Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html Cc: stable@vger.kernel.org # 3.0+ Reported-by:
Stuart D Gathman <stuart@gathman.org> Reported-by:
Kai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
My patch to validate station flags broke compatibility with the old station flags setting where all flags are always set at once since it always set the mask as all possible flags which ended up being rejected later in the station add/modify code. Fix by parsing only the current flags in the old flags attribute -- new applications and new flags should use (and will now require) the new flags attribute where the mask is given by the application. Reported-and-tested-by:
Thomas Hilber <ath9k-dev@toh.cx> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Acked-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Jan, 2012 11 commits
-
-
Jussi Kivilinna authored
In kernel v3.2 initialization sequence for Asix 88178 devices was changed so that hardware is reseted on every time interface is brought up (ifconfig up), instead just at USB probe time. This causes problem with setting custom MAC address to device as ax88178_reset causes reload of MAC address from EEPROM. This patch fixes the issue by rewriting MAC address at end of ax88178_reset. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by:
Grant Grundler <grundler@chromium.org> Cc: Allan Chou <allan@asix.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jussi Kivilinna authored
In kernel v3.2 initialization sequence for Asix 88772 devices was changed so that hardware is reseted on every time interface is brought up (ifconfig up), instead just at USB probe time. This causes problem with setting custom MAC address to device as ax88772_reset causes reload of MAC address from EEPROM. This patch fixes the issue by rewriting MAC address at end of ax88772_reset. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by:
Grant Grundler <grundler@chromium.org> Cc: Allan Chou <allan@asix.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
Fix the following build warning: warning: (ISDN_PPP) selects SLHC which has unmet direct dependencies (NETDEVICES) Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Roese authored
Otherwise the output looks like this: ... STMMAC - user ID: 0x10, Synopsys ID: 0x32 No HW DMA feature register supported Normal descriptors Remote wake-up capable Checksum Offload Engine supported No MAC Management Counters availableIP-Config: Complete: device=eth0, addr=192.168.20.42, mask=255.255.0.0, gw=192.168.1.254, ... Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Roese authored
Fix this error: CC drivers/net/ethernet/stmicro/stmmac/mmc_core.o drivers/net/ethernet/stmicro/stmmac/mmc_core.c: In function 'dwmac_mmc_ctrl': drivers/net/ethernet/stmicro/stmmac/mmc_core.c:143:2: error: implicit declaration of function 'pr_debug' [-Werror=implicit-function-declaration] Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Rajkumar Manoharan authored
The commit "ath9k: Fix invalid noisefloor reading due to channel update" preserves the current channel noisefloor readings before updating channel type at the same channel index. It is also updating the curchan pointer. As survey updation is also referring curchan pointer to fetch the appropriate index, which might leads to invalid memory access. This patch partially reverts the change and stores the noise floor history buffer before updating channel type w/o updating curchan. Cc: stable@kernel.org Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Reported-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Jesper Juhl authored
If the memory allocation 'nvram_ularray = kmalloc(varsize, GFP_ATOMIC);' fails we'll leak the memory allocated to 'vbuffer' when we return -ENOMEM from the function. This patch resolves the leak by kfree()'ing the allocated memory before the return. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
also remove an unused macro and a function declaration Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
When downloading firmware into the device, the driver fails to check the return when allocating an skb. When the allocation fails, a BUG can be generated, as seen in https://bugzilla.redhat.com/show_bug.cgi?id=771656. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-