Sometimes the Dock is disconnected, but cdn_dp_encoder_disable is not
triggered by DRM. For example, unplug the Dock in console mode, and
re-plug it again, the cdn_dp_event_work will try to get the sink count
of Dock, since the DP is still active. But the Dock has been powered
down, it need re-power on, and wait for a while until it is ready to
DPCD communication.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

We're trying to lock mutex when cdn-dp shutdown, so we need to make
sure the mutex is inited in cdn-dp's probe.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

The cdn_dp_pd_event_work is using drm_helper_hpd_irq_event to update the
connector status, this function is used to update all connectors of
drm_device. Therefore, the detect of other connector will be call, when
cdn_dp_pd_event_work is triggered, every time. It is not necessary, and
it may cause system crash. replace drm_helper_hpd_irq_event with
drm_kms_helper_hotplug_event, only update cdn-dp status.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>

If the driver is in suspended mode, the dp block may be disabled, and
chip registers may not be accessible. Yet, the worker may be triggered
in this situation by an extcon event. If that happens, the following crash
will be seen.

cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] *ERROR* Enable dp failed -19
cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Connected, not enabled. Enabling cdn
Bad mode in Error handler detected, code 0xbf000002 -- SError
CPU: 1 PID: 10357 Comm: kworker/1:2 Not tainted 4.4.21-05903-ge0514ea #1
Hardware name: Google Kevin (DT)
Workqueue: events cdn_dp_pd_event_work
task: ffffffc0cda67080 ti: ffffffc0b9b80000 task.ti: ffffffc0b9b80000
PC is at cdn_dp_clock_reset+0x30/0xa8
LR is at cdn_dp_enable+0x1e0/0x69c
...
Call trace:
[<ffffffc0005a7e24>] cdn_dp_pd_event_work+0x58/0x3f4
[<ffffffc0002397f0>] process_one_work+0x240/0x424
[<ffffffc00023a28c>] worker_thread+0x2fc/0x424
[<ffffffc00023f5fc>] kthread+0x10c/0x114
[<ffffffc000203dd0>] ret_from_fork+0x10/0x40

Problem is two-fold: The worker should not run while suspended, and the
suspend function should not call cdn_dp_disable() while the worker is
running.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

If no monitor is connected, suspend/resume cycles result in firmware
load errors because the driver attempts to load the firmware while
the system is in suspend state. This results in a kernel warning and
traceback.

Loading the firmware during boot fixes the problem. Note that we can not
just call schedule_work conditionally in cdn_dp_pd_event() if the insertion
status changed. The problem would still be seen if a monitor is connected
for the first time during suspend.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

Add support for cdn DP controller which is embedded in the rk3399
SoCs. The DP is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work,
please put the firmware file to /lib/firmware/rockchip/dptx.bin. The
uCPU in charge of aux communication and link training, the host use
mailbox to communicate with the ucpu.
The dclk pin_pol of vop must not be invert for DP.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
[seanpaul fixed up some races between the worker and modeset]
[seanpaul squashed ~15 commits from chromium.org gerrit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[groeck fixed compilation errors when building as module]
Signed-off-by: Guenter Roeck <groeck@chromium.org>

rockchip_drm_framebuffer_init is only used in one case, in
rockchip_drm_fbdev.c, where its return value is tested using IS_ERR.  To
enable propagating the reason for the error, change the definition so that
it returns an ERR_PTR value.

Problem found with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

The setting of vop registers need a reg_done writing to take effect.
In vop_enable the vop return to work by by restoring registers, but the
registers do not take effect immediately, it should a vop_cfg_done
after it. The same thing is needed by windows_disabled in
vop_crtc_disable.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

It includes code cleanups from Bhumika and Liviu, a significant shader
performance fix and additions to the cmdstream validator from Wladimir
and the addition of a cmdbuf suballocator by myself.
The suballocator improves performance on all chips by reducing the CPU
overhead of the kernel driver and side steps the GC3000 FE MMU flush
erratum, now making the workarounds in IOVA allocation we had before
unnecessary, which results in a nice cleanup of the code in that area.

* 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: Remove duplicate header file include
  Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"
  drm/etnaviv: add cmdbuf suballocator
  drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction
  drm/etnaviv: wire up iova handling in new cmdbuf abstraction
  drm/etnaviv: move cmdbuf de-/allocation into own file
  drm/etnaviv: always flush MMU TLBs on map/unmap
  drm/etnaviv: constify etnaviv_iommu_ops structures
  drm/etnaviv: set up initial PULSE_EATER register
  drm/etnaviv: add new GC3000 sensitive states

etnaviv_gem.h header gets included twice. Remove duplicate.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Now that commandstreams are handled through the cmdbuf suballocator
the workaround to make the IOVA games work is not needed anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

There are 3 big benefits to suballocating a single big DMA buffer
for command submission:

1. Avoid hammering CMA. The old way of allocating and freeing a DMA
   buffer for each submission was hitting some of the real slow
   pathes in CMA, as this allocator was not designed for a concurrent
   small buffers load.

2. Less TLB flushes on IOMMUv2. If a new command buffer is mapped into
   the GPU address space the MMU TLBs need to be flushed. By having
   one big buffer statically mapped to the GPU, a lot of those flushes
   can be avoided.

3. No funky workarounds for GC3000. The FE TLB flush on GC3000 isn't
   reliable. To work around that we tried to lay out the cmdbufs in
   the GPU address space in a way to avoid this issue. This hasn't
   always worked if the address space is crowded. A single statically
   mapped buffer avoids the erratum completely.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Don't allow IOMMUv2 to peek directly into the cmdbuf, but get the
needed PA through a dedicated function.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Don't call the IOMMU directly, but go through the new cmdbuf abstraction.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

This will get more complex with the following changes, so move it
into its own place.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

This ensures that the GPU isn't able to write into already freed
objects, as doing this in the IOVA reaper isn't enough, as the
gem_free_object path will also cause unmaps to happen.

On MMUv2 this also ensures that stale entries, which may have
been prefetched into the TLB will be purged.

The flush is low overhead, as it gets batched up with the next
user command buffer, so this isn't incuring an overhead for
each buffer map/unmap.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Declare etnaviv_iommu_ops structure as const as it is only used when
the reference of one of its field is stored in the ops field of a
iommu_domain structure. This ops field is of type const, so
etnaviv_iommu_ops structures having similar properties can be declared
const too.

Done using Coccinelle.
Before and after size details of .o file remains the same after
cross compiling for arm architecture.

lst: Trimmed commit message, apply the same change to iommu_v2.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

adding runtime PM support to MIC driver, and including some
cleanups - especially using atomic helper functions
instead of specific ones - and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: g2d: prevent integer overflow in
  drm/exynos: fix a timeout loop
  drm/exynos: use atomic helper commit
  drm/exynos: remove unnecessary codes
  drm/exynos: mic: Add runtime PM support
  drm/exynos: Stop using drm_framebuffer_unregister_private
  drm/exynos: mic: Fix parse_dt function
  drm/exynos: mic: Add mode_set callback function

Merge tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.11

Just one minor fix.

* tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: Fix a return value in case of error

This is to address what we've discussed, moving some of the minor changes
into a drm-next request.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy
  drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
  drm/vmwgfx: Fix a potential integer overflow
  drm/vmwgfx: Clear an uninitialized struct member
  drm/vmwgfx: Annotate ignored return values
  drm/vmwgfx: Clear uninitialized fields of a parameter

This is the main feature pull for radeon and amdgpu for 4.11.  Highlights:
- Power and clockgating improvements
- Preliminary SR-IOV support
- ttm buffer priority support
- ttm eviction fixes
- Removal of the ttm lru callbacks
- Remove SI DPM quirks due to MC firmware issues
- Handle VFCT with multiple vbioses
- Powerplay improvements
- Lots of driver cleanups

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits)
  drm/amdgpu: fix amdgpu_bo_va_mapping flags
  drm/amdgpu: access stolen VRAM directly on CZ (v2)
  drm/amdgpu: access stolen VRAM directly on KV/KB (v2)
  drm/amdgpu: fix kernel panic when dpm disabled on Kv.
  drm/amdgpu: fix dpm bug on Kv.
  drm/amd/powerplay: fix regresstion issue can't set manual dpm mode.
  drm/amdgpu: handle vfct with multiple vbios images
  drm/radeon: handle vfct with multiple vbios images
  drm/amdgpu: move misc si headers into amdgpu
  drm/amdgpu: remove unused header si_reg.h
  drm/radeon: drop pitcairn dpm quirks
  drm/amdgpu: drop pitcairn dpm quirks
  drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache
  drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache
  drm/amdgpu: add new virtual display ID
  drm/amd/amdgpu: remove the uncessary parameter for ib scheduler
  drm/amdgpu: Bring bo creation in line with radeon driver (v2)
  drm/amd/powerplay: fix misspelling in header guard
  drm/ttm: revert "add optional LRU removal callback v2"
  drm/ttm: revert "implement LRU add callbacks v2"
  ...

Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next

Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.

* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
  drm/atmel-hlcdc: Rework the fbdev creation logic

Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next

ZTE DRM driver updates for 4.11:
 - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
   driver uses drm_display_mode_to_videomode().
 - Enable HDMI audio support through SPDIF interface based on generic
   hdmi-audio-codec driver.
 - Enable VOU VL (Video Layer) to support overlay plane with scaling
   function.
 - Refine zx_vou driver a bit and then add TV Encoder output device
   support.

[airlied: fixup plane format change]

* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  drm: zte: add tvenc driver support
  dt: add bindings for ZTE tvenc device
  drm: zte: add function to configure vou_ctrl dividers
  drm: zte: move struct vou_inf into zx_vou driver
  drm: zte: add interlace mode support
  drm: zte: add overlay plane support
  drm: zte: add .atomic_disable hook to disable graphic layer
  drm: zte: make zx_plane accessible from zx_vou driver
  drm: zte: support hdmi audio through spdif
  drm: zte: select VIDEOMODE_HELPERS in Kconfig

Updated pull request after I pulled first time :)

* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view

Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: fix stride setting for multi-plane formats
  drm: mali-dp: Add plane offset to the plane's physical start address register
  drm: mali-dp: Check for sufficient address space
  drm: mali-dp: Check hw version matches device-tree
  drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
  drm: mali-dp: fix Lx_CONTROL register fields clobber
  drm: mali-dp: Fix transposed horizontal/vertical flip
  drm: mali-dp: Fix destination size handling when rotating
  drm: mali-dp: Don't force source size == crtc size
  drm: mali-dp: Check more use cases in the plane's ->atomic_check()
  drm: malidp: Remove event_list member from struct malidp_drm
  drm/arm/malidp: Fix possible dereference of NULL

The size computations done in the ioctl function use an integer.
If userspace submits a request with req->cmd_nr or req->cmd_buf_nr
set to INT_MAX, the integer computations overflow later, leading
to potential (kernel) memory corruption.

Prevent this issue by enforcing a limit on the number of submitted
commands, so that we have enough headroom later for the size
computations.

Note that this change has no impact on the currently available
users in userspace, like e.g. libdrm/exynos.

While at it, also make a comment about the size computation more
detailed.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

We were trying to print an error message if we timed out here, but the
loop actually ends with "tries" set to UINT_MAX and not zero.  Fix this
by changing from tries-- to --tries.

A for loop would actually be the most natural way to do this.  My fix
means we only loop 99 times instead of 100 but that's probably ok.

Fixes: a696394c ('drm/exynos: mixer: simplify loop in vp_win_reset()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch replaces specific atomic commit function
with atomic helper commit one.

For this, it removes existing atomic commit function
and relevant code specific to Exynos DRM and makes
atomic helper commit to be used instead.

Below are changes for the use of atomic helper commit:
- add atomic_commit_tail callback specific to Exynos DRM
  . default implemention of atomic helper doesn't mesh well
    with runtime PM so the device driver which supports runtime
    PM should call drm_atomic_helper_commit_modeset_enables function
    prior to drm_atomic_helper_commit_planes function call.
    atomic_commit_tail callback implements this call ordering.
- allow plane commit only in case that CRTC device is enabled.
  . for this, it calls atomic_helper_commit_planes function
    with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>

This patch removes exynos_drm_crtc_cancel_page_flip call
when drm is closed because at that time, events will be released
by drm_events_release function.

Changelog v1:
- remove exynos_drm_crtc_cancel_page_flip function also because
  this funtion isn't used anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

This patch adds runtime support calls to notify device core when MIC
device is really in use. Runtime PM is implemented by enabling and
disabling clocks like in other Exynos DRM subdrivers. Adding runtime
PM support is needed to let power domain with this device to be turned
off when display is not used.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But exynos is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The OF graph is not necessary because the panel is a child of
dsi. therefore, the parse_dt function of dsi does not need to
check the remote_node connected to the panel. and the whole
parse_dt function should be refactored later.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Before applying the patch, used the of_get_videomode function to
parse the display-timings in the panel which is the child driver
of dsi in the devicetree. this is wrong. So removed the
of_get_videomode and fixed to get videomode struct through
mode_set callback function.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Set up the PULSE_EATER register (0x0010C) in etnaviv_gpu_hw_init. This
ports three mostly undocumented model/revision-specific register
overrides from the Vivante kernel driver.

This is relevant as at least the "disable internal DFS" for revisions >
0x5420 has shown to have a huge impact on shader performance (sped up
memory read performance by 7.5x and write performance by 1.5x) on an
affected GPU.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

- Add PS.INST_ADDR (0x01028) and VS.INST_ADDR (0x0086C): GC3000 loads
  shader code from these addresses if ICACHE is used.

- Add new NFE vertex stream addresses (0x14600).

- Add PE Multple Render Target pipe addresses (0x14800).

- Add TS Multiple Render Target pipe addresses (0x017C0, 0x17E0).
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().

This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: eric@anholt.net
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org

It adds the TV Encoder driver to support video output in PAL and NTSC
format.  The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

It adds bindings doc for ZTE VOU TV Encoder device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>