An error occurred fetching the project authors.
- 14 Dec, 2023 19 commits
-
-
Ahmed Zaki authored
Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by:Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ahmed Zaki authored
Add the RSS context parameters to struct ethtool_rxfh_param and use the get/set_rxfh to handle the RSS contexts as well. This is part 2/2 of the fix suggested in [1]: - Add a rss_context member to the argument struct and a capability like cap_link_lanes_supported to indicate whether driver supports rss contexts, then you can remove *et_rxfh_context functions, and instead call *et_rxfh() with a non-zero rss_context. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Tony Nguyen <anthony.l.nguyen@intel.com> CC: Marcin Wojtas <mw@semihalf.com> CC: Russell King <linux@armlinux.org.uk> CC: Sunil Goutham <sgoutham@marvell.com> CC: Geetha sowjanya <gakula@marvell.com> CC: Subbaraya Sundeep <sbhatta@marvell.com> CC: hariprasad <hkelam@marvell.com> CC: Saeed Mahameed <saeedm@nvidia.com> CC: Leon Romanovsky <leon@kernel.org> CC: Edward Cree <ecree.xilinx@gmail.com> CC: Martin Habets <habetsm.xilinx@gmail.com> Suggested-by:
-
Ahmed Zaki authored
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Releasing the DMA mapping will be useful for other types of pages, so factor it out. Make sure compiler inlines it, to avoid any regressions. Signed-off-by:
Mina Almasry <almasrymina@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Liang Chen authored
To support multiple users referencing the same fragment, 'pp_frag_count' is renamed to 'pp_ref_count', transitioning pp pages from fragment management to reference count management after draining based on the suggestion from [1]. The idea is that the concept of fragmenting exists before the page is drained, and all related functions retain their current names. However, once the page is drained, its management shifts to being governed by 'pp_ref_count'. Therefore, all functions associated with that lifecycle stage of a pp page are renamed. [1] http://lore.kernel.org/netdev/f71d9448-70c8-8793-dc9a-0eb48a570300@huawei.comSigned-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by:
-
Kees Cook authored
Builds with W=1 were warning about potential string truncations: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c: In function 'cxgb_up': drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:38: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 5 and 20 [-Wformat-truncation=] 394 | "%s-%d", d->name, pi->first_qset + i); | ^~ In function 'name_msix_vecs', inlined from 'cxgb_up' at drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:1264:3: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:34: note: directive argument in the range [-2147483641, 509] 394 | "%s-%d", d->name, pi->first_qset + i); | ^~~~~~~ drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:393:25: note: 'snprintf' output between 3 and 28 bytes into a destination of size 21 393 | snprintf(adap->msix_info[msi_idx].desc, n, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 394 | "%s-%d", d->name, pi->first_qset + i); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Avoid open-coded %NUL-termination (this code was assuming snprintf wasn't %NUL terminating when it does -- likely thinking of strncpy), and grow the size of the string to handle a maximal value. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/ Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231212220954.work.219-kees@kernel.orgSigned-off-by:
-
Kees Cook authored
Build with W=1 were warning about a potential string truncation: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function 'xgbe_alloc_channels': drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:73: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:64: note: directive argument in the range [0, 4294967294] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:17: note: 'snprintf' output between 10 and 19 bytes into a destination of size 16 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of the "name" buffer to handle the full format range. Reported-by: -
Jiri Pirko authored
Pin ID is just a number. Nobody should rely on a certain value, instead, user should use either pin-id-get op or RTNetlink to get it. Unify the pin ID allocation behavior with what there is already implemented for dpll devices. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231212150605.1141261-1-jiri@resnulli.usSigned-off-by:
-
Eric Dumazet authored
For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue is not empty but recvmsg() can not drain the error queue yet. This is needed to better support timestamping. I had to export inet_recv_error(), since sctp can be compiled as a module. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Alexander Lobakin says: ==================== idpf: add get/set for Ethtool's header split ringparam Currently, the header split feature (putting headers in one smaller buffer and then the data in a separate bigger one) is always enabled in idpf when supported. One may want to not have fragmented frames per each packet, for example, to avoid XDP frags. To better optimize setups for particular workloads, add ability to switch the header split state on and off via Ethtool's ringparams, as well as to query the current status. There's currently only GET in the Ethtool Netlink interface for now, so add SET first. I suspect idpf is not the only one supporting this. ==================== Link: https://lore.kernel.org/r/20231212142752.935000-1-aleksander.lobakin@intel.comSigned-off-by:
-
Michal Kubiak authored
idpf supports the header split feature and that feature is always enabled by default. However, for flexibility reasons and to simplify some scenarios, it would be useful to have the support for switching the header split off (and on) from the userspace. Address that need by adding the user config parameter, the functions for disabling (or enabling) the header split feature, and calls to them from the Ethtool ringparam callbacks. It still is enabled by default if supported by the hardware. Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Michal Kubiak <michal.kubiak@intel.com> Co-developed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
Alexander Lobakin authored
Follow up commit 9690ae60 ("ethtool: add header/data split indication") and add the set part of Ethtool's header split, i.e. ability to enable/disable header split via the Ethtool Netlink interface. This might be helpful to optimize the setup for particular workloads, for example, to avoid XDP frags, and so on. A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its ops->supported_ring_params to allow doing that. "Unknown" passed from the userspace when the header split is supported means the driver is free to choose the preferred state. Reviewed-by:
-
Eric Dumazet authored
TCP got MSG_EOR support in linux-4.7. This is a canonical way of making sure no coalescing will be performed on the skb, even if it could not be immediately sent. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231212110608.3673677-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== add support for DP83TG720S PHY ==================== Link: https://lore.kernel.org/r/20231212054144.87527-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and same TI PHY on other side. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20231212054144.87527-3-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Move part of the genphy_c45_pma_read_abilities() code to a separate function. Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but do implement PMA/PMD extended ability register (Register 1.11). To make use of it, we need to be able to access this part of code separately. Signed-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== net/sched: optimizations around action binding and init Scaling optimizations for action binding in rtnl-less filters. We saw a noticeable lock contention around idrinfo->lock when testing in a 56 core system, which disappeared after the patches. ==================== Link: https://lore.kernel.org/r/20231211181807.96028-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
tcf_idr_insert_many will replace the allocated -EBUSY pointer in tcf_idr_check_alloc with the real action pointer, exposing it to all operations. This operation is only needed when the action pointer is created (ACT_P_CREATED). For actions which are bound to (returned 0), the pointer already resides in the idr making such operation a nop. Even though it's a nop, it's still not a cheap operation as internally the idr code walks the idr and then does a replace on the appropriate slot. So if the action was bound, better skip the idr replace entirely. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Instead of relying only on the idrinfo->lock mutex for bind/alloc logic, rely on a combination of rcu + mutex + atomics to better scale the case where multiple rtnl-less filters are binding to the same action object. Action binding happens when an action index is specified explicitly and an action exists which such index exists. Example: tc actions add action drop index 1 tc filter add ... matchall action drop index 1 tc filter add ... matchall action drop index 1 tc filter add ... matchall action drop index 1 tc filter ls ... filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 When no index is specified, as before, grab the mutex and allocate in the idr the next available id. In this version, as opposed to before, it's simplified to store the -EBUSY pointer instead of the previous alloc + replace combination. When an index is specified, rely on rcu to find if there's an object in such index. If there's none, fallback to the above, serializing on the mutex and reserving the specified id. If there's one, it can be an -EBUSY pointer, in which case we just try again until it's an action, or an action. Given the rcu guarantees, the action found could be dead and therefore we need to bump the refcount if it's not 0, handling the case it's in fact 0. As bind and the action refcount are already atomics, these increments can happen without the mutex protection while many tcf_idr_check_alloc race to bind to the same action instance. In case binding encounters a parallel delete or add, it will return -EAGAIN in order to try again. Both filter and action apis already have the retry machinery in-place. In case it's an unlocked filter it retries under the rtnl lock. Signed-off-by:
-
- 13 Dec, 2023 21 commits
-
-
David S. Miller authored
Heng Qi says: ==================== virtio-net: support dynamic coalescing moderation Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net. Due to some scheduling issues, we only support and test the rx dim. Some test results: I. Sockperf UDP ================================================= 1. Env rxq_0 with affinity to cpu_0. 2. Cmd client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B server: taskset -c 0 sockperf sr -p 8989 3. Result dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%. dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%. ================================================= II. Redis ================================================= 1. Env There are 8 rxqs, and rxq_i with affinity to cpu_i. 2. Result When all cpus are 100%, ops/sec of memtier_benchmark client is dim off: 978437.23 dim on: 1143638.28 ================================================= III. Nginx ================================================= 1. Env There are 8 rxqs and rxq_i with affinity to cpu_i. 2. Result When all cpus are 100%, requests/sec of wrk client is dim off: 877931.67 dim on: 1019160.31 ================================================= IV. Latency of sockperf udp ================================================= 1. Rx cmd taskset -c 0 sockperf sr -p 8989 2. Tx cmd taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10 After running this cmd 5 times and averaging the results, 3. Result dim off: 17.7735 usec dim on: 18.0110 usec ================================================= Changelog: v7->v8: - Add select DIMLIB. v6->v7: - Drop the patch titled "spin lock for ctrl cmd access" - Use rtnl_trylock to avoid the deadlock. v5->v6: - Add patch(4/5): spin lock for ctrl cmd access - Patch(5/5): - Use spin lock and cancel_work_sync to synchronize v4->v5: - Patch(4/4): - Fix possible synchronization issues with cancel_work_sync. - Reduce if/else nesting levels v3->v4: - Patch(5/5): drop. v2->v3: - Patch(4/5): some minor modifications. v1->v2: - Patch(2/5): a minor fix. - Patch(4/5): - improve the judgment of dim switch conditions. - Cancel the work when vq reset. - Patch(5/5): drop the tx dim implementation. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Heng Qi authored
By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue. Signed-off-by:
Heng Qi <hengqi@linux.alibaba.com> Signed-off-by:
-
Heng Qi authored
Extract commands to set virtqueue coalescing parameters for reuse by ethtool -Q, vq resize and netdim. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Heng Qi authored
This patch separates the rx and tx global coalescing moderation commands to support netdim switches in subsequent patches. Signed-off-by:
-
Heng Qi authored
rx netdim needs to count the traffic during a complete napi process, and start updating and comparing samples to make decisions after the napi ends. Let virtqueue_napi_complete() return true if napi is done, otherwise vice versa. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: updates to PCI error handling These are improvements to our PCI error handling, including FLR and AER events. ==================== Signed-off-by: -
Shannon Nelson authored
Set up the pci_error_handlers error_detected and resume to be useful in handling AER events. If the error detected is pci_channel_io_frozen we set up to do an FLR at the end of the AER handling - this tends to clear things up well enough that traffic can continue. Else, let the AER/PCI machinery do what is needed for the less serious errors seen. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
-
Shannon Nelson authored
Remove and restore the lif's debugfs pointers on a reset, and make sure to check for the dentry before removing it in case an earlier reset failed to rebuild the lif. Signed-off-by:
-
Shannon Nelson authored
When stopping the watchdog timer at remove time we should be using the new timer_shutdown_sync to assure the timer doesn't ever get rearmed. Signed-off-by:
-
Shannon Nelson authored
If there was a failed attempt to reset the PCI connection, don't later try to read from PCI as the space is unmapped and will cause a paging request crash. When clearing the PCI setup we can clear the dev_info register pointer, and check it before using it in the fw_running test. Signed-off-by:
-
Shannon Nelson authored
If a reset fails, the PCI device is left in a disabled state, so don't try to disable it again on driver remove. This prevents a scary looking WARN trace in the kernel log. ionic 0000:2b:00.0: disabling already-disabled device Signed-off-by: -
Shannon Nelson authored
If the driver or firmware is stuck in reset state, don't bother trying to use adminq commands. This speeds up shutdown and prevents unnecessary timeouts and error messages. This includes a bit of rework on ionic_adminq_post_wait() and ionic_adminq_post_wait_nomsg() to both use __ionic_adminq_post_wait() which can do the checks needed in both cases. Signed-off-by:
-
Shannon Nelson authored
Make sure we keep and replay the filters and RSS config across an FLR by using our FW_RESET flag. This gets checked on the way down and on the way back up to help determine how much LIF state to keep and restore across a reset action. Signed-off-by:
-
Shannon Nelson authored
Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Signed-off-by:
-
Furong Xu authored
Complete all counters on XGMAC Core. These can be useful for debugging. Signed-off-by:
Furong Xu <0x1207@gmail.com> Signed-off-by:
-
David S. Miller authored
Christian Marangi says: ==================== net: phy: at803x: cleanup The intention of this big series is to try to cleanup the big at803x PHY driver. It currently have 3 different family of PHY in it. at803x, qca83xx and qca808x. The current codebase required lots of cleanup and reworking to make the split possible as currently there is a greater use of adding special function matching the phy_id. This has been reworked to make the function actually generic and make the change only in more specific one. The result is the addition of micro additional function but that is for good as it massively simplify splitting the driver later. Consider that this is all in preparation for the addition of qca807x PHY driver that will also uso some of the functions of at803x. Subsequent series will come with the actual PHY split and other required cleanup. This is only to start the process with minor changes. Changes v4: - Improve at8031_probe function Changes v3: - Add Reviewed-by tag from Andrew - Split patch 10 (at8031 rename) to rename and move Changes v2: - Drop split part due to series too big - Split changes even more - Fix problem pointed out by Russell (flawed reworked function logic) - Add Reviewed-by tag from Andrew - Minor rework to prevent further code duplication for cdt ==================== Signed-off-by: -
Christian Marangi authored
Drop specific PHY ID check for cable test functions for at803x. This is done to make functions more generic. While at it better describe what the functions does by using more symbolic function names. PHYs that requires to set additional reg are moved to specific function calling the more generic one. cdt_start and cdt_wait_for_completion are changed to take an additional arg to pass specific values specific to the PHY. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Move at8035 specific DT parse for clock out frequency to dedicated probe to make at803x probe function more generic. This is to tidy code and no behaviour change are intended. Detection logic is changed, we check if the clk 25m mask is set and if it's not zero, we assume the qca,clk-out-frequency property is set. The property is checked in the generic at803x_parse_dt called by at803x_probe. Signed-off-by:
-
Christian Marangi authored
Move at8031 functions in dedicated section with dedicated at8031 parse_dt and probe. Signed-off-by:
-
Christian Marangi authored
Rename at8031 related DT function name to a more specific name referencing they are only related to at8031 and not to the generic at803x PHY family. Signed-off-by:
-
Christian Marangi authored
Move specific at8031 config_intr bits to dedicated function to make at803x_config_initr more generic. This is needed in preparation for PHY driver split as qca8081 share the same function to setup interrupts. Signed-off-by:
-
