- 26 Apr, 2022 24 commits
-
-
Andrii Nakryiko authored
Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as an input instead of requiring callers to decompose them into type_id, relo, spec_str, etc. This makes using and reusing this helper easier. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
-
Andrii Nakryiko authored
Refactor how CO-RE relocation is formatted. Now it dumps human-readable representation, currently used by libbpf in either debug or error message output during CO-RE relocation resolution process, into provided buffer. This approach allows for better reuse of this functionality outside of CO-RE relocation resolution, which we'll use in next patch for providing better error message for BPF verifier rejecting BPF program due to unguarded failed CO-RE relocation. It also gets rid of annoying "stitching" of libbpf_print() calls, which was the only place where we did this. Signed-off-by:
-
Andrii Nakryiko authored
Previously, libbpf recorded CO-RE relocations with insns_idx resolved according to finalized subprog locations (which are appended at the end of entry BPF program) to simplify the job of light skeleton generator. This is necessary because once subprogs' instructions are appended to main entry BPF program all the subprog instruction indices are shifted and that shift is different for each entry (main) BPF program, so it's generally impossible to map final absolute insn_idx of the finalized BPF program to their original locations inside subprograms. This information is now going to be used not only during light skeleton generation, but also to map absolute instruction index to subprog's instruction and its corresponding CO-RE relocation. So start recording these relocations always, not just when obj->gen_loader is set. This information is going to be freed at the end of bpf_object__load() step, as before (but this can change in the future if there will be a need for this information post load step). Signed-off-by:
-
Andrii Nakryiko authored
Enhance linked_funcs selftest with two tricky features that might not obviously work correctly together. We add CO-RE relocations to entry BPF programs and mark those programs as non-autoloadable with SEC("?...") annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE relocation data matching correctly for SEC("?...") programs, as well as ensures that BPF static linker handles this correctly (this was the case before, no changes are necessary, but it wasn't explicitly tested). Signed-off-by: -
Andrii Nakryiko authored
Instead of using ELF section names as a joining key between .BTF.ext and corresponding BPF programs, pre-build .BTF.ext section number to ELF section index mapping during bpf_object__open() and use it later for matching .BTF.ext information (func/line info or CO-RE relocations) to their respective BPF programs and subprograms. This simplifies corresponding joining logic and let's libbpf do manipulations with BPF program's ELF sections like dropping leading '?' character for non-autoloaded programs. Original joining logic in bpf_object__relocate_core() (see relevant comment that's now removed) was never elegant, so it's a good improvement regardless. But it also avoids unnecessary internal assumptions about preserving original ELF section name as BPF program's section name (which was broken when SEC("?abc") support was added). Fixes: a3820c48 ("libbpf: Support opting out from autoloading BPF programs declaratively") Signed-off-by: -
Andrii Nakryiko authored
Fix the bug in bpf_object__relocate_core() which can lead to finding invalid matching BPF program when processing CO-RE relocation. IF matching program is not found, last encountered program will be assumed to be correct program and thus error detection won't detect the problem. Fixes: 9c82a63c ("libbpf: Fix CO-RE relocs against .text section") Signed-off-by:
-
Andrii Nakryiko authored
libbpf pretends it knows actual limit of BPF program instructions based on UAPI headers it compiled with. There is neither any guarantee that UAPI headers match host kernel, nor BPF verifier actually uses BPF_MAXINSNS constant anymore. Just drop unhelpful "guess", BPF verifier will emit actual reason for failure in its logs anyways. Signed-off-by:
-
Andrii Nakryiko authored
Use type name for checking whether CO-RE relocation is referring to anonymous type. Using spec string makes no sense. Signed-off-by:
-
Menglong Dong authored
For now, the field 'map_btf_id' in 'struct bpf_map_ops' for all map types are computed during vmlinux-btf init: btf_parse_vmlinux() -> btf_vmlinux_map_ids_init() It will lookup the btf_type according to the 'map_btf_name' field in 'struct bpf_map_ops'. This process can be done during build time, thanks to Jiri's resolve_btfids. selftest of map_ptr has passed: $96 map_ptr:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Alexei Starovoitov authored
Kumar Kartikeya Dwivedi says: ==================== This set enables storing pointers of a certain type in BPF map, and extends the verifier to enforce type safety and lifetime correctness properties. The infrastructure being added is generic enough for allowing storing any kind of pointers whose type is available using BTF (user or kernel) in the future (e.g. strongly typed memory allocation in BPF program), which are internally tracked in the verifier as PTR_TO_BTF_ID, but for now the series limits them to two kinds of pointers obtained from the kernel. Obviously, use of this feature depends on map BTF. 1. Unreferenced kernel pointer In this case, there are very few restrictions. The pointer type being stored must match the type declared in the map value. However, such a pointer when loaded from the map can only be dereferenced, but not passed to any in-kernel helpers or kernel functions available to the program. This is because while the verifier's exception handling mechanism coverts BPF_LDX to PROBE_MEM loads, which are then handled specially by the JIT implementation, the same liberty is not available to accesses inside the kernel. The pointer by the time it is passed into a helper has no lifetime related guarantees about the object it is pointing to, and may well be referencing invalid memory. 2. Referenced kernel pointer This case imposes a lot of restrictions on the programmer, to ensure safety. To transfer the ownership of a reference in the BPF program to the map, the user must use the bpf_kptr_xchg helper, which returns the old pointer contained in the map, as an acquired reference, and releases verifier state for the referenced pointer being exchanged, as it moves into the map. This a normal PTR_TO_BTF_ID that can be used with in-kernel helpers and kernel functions callable by the program. However, if BPF_LDX is used to load a referenced pointer from the map, it is still not permitted to pass it to in-kernel helpers or kernel functions. To obtain a reference usable with helpers, the user must invoke a kfunc helper which returns a usable reference (which also must be eventually released before BPF_EXIT, or moved into a map). Since the load of the pointer (preserving data dependency ordering) must happen inside the RCU read section, the kfunc helper will take a pointer to the map value, which must point to the actual pointer of the object whose reference is to be raised. The type will be verified from the BTF information of the kfunc, as the prototype must be: T *func(T **, ... /* other arguments */); Then, the verifier checks whether pointer at offset of the map value points to the type T, and permits the call. This convention is followed so that such helpers may also be called from sleepable BPF programs, where RCU read lock is not necessarily held in the BPF program context, hence necessiating the need to pass in a pointer to the actual pointer to perform the load inside the RCU read section. Notes ----- * C selftests require https://reviews.llvm.org/D119799 to pass. * Unlike BPF timers, kptr is not reset or freed on map_release_uref. * Referenced kptr storage is always treated as unsigned long * on kernel side, as BPF side cannot mutate it. The storage (8 bytes) is sufficient for both 32-bit and 64-bit platforms. * Use of WRITE_ONCE to reset unreferenced kptr on 32-bit systems is fine, as the actual pointer is always word sized, so the store tearing into two 32-bit stores won't be a problem as the other half is always zeroed out. Changelog: ---------- v5 -> v6 v5: https://lore.kernel.org/bpf/20220415160354.1050687-1-memxor@gmail.com * Address comments from Alexei * Drop 'Revisit stack usage' comment * Rename off_btf to kernel_btf * Add comment about searching using type from map BTF * Do kmemdup + btf_get instead of get + kmemdup + put * Add comment for btf_struct_ids_match * Add comment for assigning non-zero id for mark_ptr_or_null_reg * Rename PTR_RELEASE to OBJ_RELEASE * Rename BPF_MAP_OFF_DESC_TYPE_XXX_KPTR to BPF_KPTR_XXX * Remove unneeded likely/unlikely in cold functions * Fix other misc nits * Keep release_regno instead of replacing with bool + regno * Add a patch to prevent type match for first member when off == 0 for release functions (kfunc + BPF helpers) * Guard kptr/kptr_ref definition in libbpf header with __has_attribute to prevent selftests compilation error with old clang not support type tags v4 -> v5 v4: https://lore.kernel.org/bpf/20220409093303.499196-1-memxor@gmail.com * Address comments from Joanne * Move __btf_member_bit_offset before strcmp * Move strcmp conditional on name to unref kptr patch * Directly return from btf_find_struct in patch 1 * Use enum btf_field_type vs int field_type * Put btf and btf_id in off_desc in named struct 'kptr' * Switch order for BTF_FIELD_IGNORE check * Drop dead tab->nr_off = 0 store * Use i instead of tab->nr_off to btf_put on failure * Replace kzalloc + memcpy with kmemdup (kernel test robot) * Reject both BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG * Add logging statement for reject BPF_MODE(insn->code) != BPF_MEM * Rename off_desc -> kptr_off_desc in check_mem_access * Drop check for err, fallthrough to end of function * Remove is_release_function, use meta.release_regno to detect release function, release reference state, and remove check_release_regno * Drop off_desc->flags, use off_desc->type * Update comment for ARG_PTR_TO_KPTR * Distinguish between direct/indirect access to kptr * Drop check_helper_mem_access from process_kptr_func, check_mem_reg in kptr_get * Add verifier test for helper accessing kptr indirectly * Fix other misc nits, add Acked-by for patch 2 v3 -> v4 v3: https://lore.kernel.org/bpf/20220320155510.671497-1-memxor@gmail.com * Use btf_parse_kptrs, plural kptrs naming (Joanne, Andrii) * Remove unused parameters in check_map_kptr_access (Joanne) * Handle idx < info_cnt kludge using tmp variable (Andrii) * Validate tags always precede modifiers in BTF (Andrii) * Split out into https://lore.kernel.org/bpf/20220406004121.282699-1-memxor@gmail.com * Store u32 type_id in btf_field_info (Andrii) * Use base_type in map_kptr_match_type (Andrii) * Free kptr_off_tab when not bpf_capable (Martin) * Use PTR_RELEASE flag instead of bools in bpf_func_proto (Joanne) * Drop extra reg->off and reg->ref_obj_id checks in map_kptr_match_type (Martin) * Use separate u32 and u8 arrays for offs and sizes in off_arr (Andrii) * Simplify and remove map->value_size sentinel in copy_map_value (Andrii) * Use sort_r to keep both arrays in sync while sorting (Andrii) * Rename check_and_free_timers_and_kptr to check_and_free_fields (Andrii) * Move dtor prototype checks to registration phase (Alexei) * Use ret variable for checking ASSERT_XXX, use shorter strings (Andrii) * Fix missing checks for other maps (Jiri) * Fix various other nits, and bugs noticed during self review v2 -> v3 v2: https://lore.kernel.org/bpf/20220317115957.3193097-1-memxor@gmail.com * Address comments from Alexei * Set name, sz, align in btf_find_field * Do idx >= info_cnt check in caller of btf_find_field_* * Use extra element in the info_arr to make this safe * Remove while loop, reject extra tags * Remove cases of defensive programming * Move bpf_capable() check to map_check_btf * Put check_ptr_off_reg reordering hunk into separate patch * Warn for ref_ptr once * Make the meta.ref_obj_id == 0 case simpler to read * Remove kptr_percpu and kptr_user support, remove their tests * Store size of field at offset in off_arr * Fix BPF_F_NO_PREALLOC set wrongly for hash map in C selftest * Add missing check_mem_reg call for kptr_get kfunc arg#0 check v1 -> v2 v1: https://lore.kernel.org/bpf/20220220134813.3411982-1-memxor@gmail.com * Address comments from Alexei * Rename bpf_btf_find_by_name_kind_all to bpf_find_btf_id * Reduce indentation level in that function * Always take reference regardless of module or vmlinux BTF * Also made it the same for btf_get_module_btf * Use kptr, kptr_ref, kptr_percpu, kptr_user type tags * Don't reserve tag namespace * Refactor btf_find_field to be side effect free, allocate and populate kptr_off_tab in caller * Move module reference to dtor patch * Remove support for BPF_XCHG, BPF_CMPXCHG insn * Introduce bpf_kptr_xchg helper * Embed offset array in struct bpf_map, populate and sort it once * Adjust copy_map_value to memcpy directly using this offset array * Removed size member from offset array to save space * Fix some problems pointed out by kernel test robot * Tidy selftests * Lots of other minor fixes ==================== Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Ensure that the edge case where first member type was matched successfully even if it didn't match BTF type of register is caught and rejected by the verifier. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in BPF map case, including some tests that verify implementation sanity and corner cases. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This uses the __kptr and __kptr_ref macros as well, and tries to test the stuff that is supposed to work, since we have negative tests in test_verifier suite. Also include some code to test map-in-map support, such that the inner_map_meta matches the kptr_off_tab of map added as element. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Include convenience definitions: __kptr: Unreferenced kptr __kptr_ref: Referenced kptr Users can use them to tag the pointer type meant to be used with the new support directly in the map value definition. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
The current of behavior of btf_struct_ids_match for release arguments is that when type match fails, it retries with first member type again (recursively). Since the offset is already 0, this is akin to just casting the pointer in normal C, since if type matches it was just embedded inside parent sturct as an object. However, we want to reject cases for release function type matching, be it kfunc or BPF helpers. An example is the following: struct foo { struct bar b; }; struct foo *v = acq_foo(); rel_bar(&v->b); // btf_struct_ids_match fails btf_types_are_same, then // retries with first member type and succeeds, while // it should fail. Hence, don't walk the struct and only rely on btf_types_are_same for strict mode. All users of strict mode must be dealing with zero offset anyway, since otherwise they would want the struct to be walked. Signed-off-by: -
Kumar Kartikeya Dwivedi authored
We introduce a new style of kfunc helpers, namely *_kptr_get, where they take pointer to the map value which points to a referenced kernel pointer contained in the map. Since this is referenced, only bpf_kptr_xchg from BPF side and xchg from kernel side is allowed to change the current value, and each pointer that resides in that location would be referenced, and RCU protected (this must be kept in mind while adding kernel types embeddable as reference kptr in BPF maps). This means that if do the load of the pointer value in an RCU read section, and find a live pointer, then as long as we hold RCU read lock, it won't be freed by a parallel xchg + release operation. This allows us to implement a safe refcount increment scheme. Hence, enforce that first argument of all such kfunc is a proper PTR_TO_MAP_VALUE pointing at the right offset to referenced pointer. For the rest of the arguments, they are subjected to typical kfunc argument checks, hence allowing some flexibility in passing more intent into how the reference should be taken. For instance, in case of struct nf_conn, it is not freed until RCU grace period ends, but can still be reused for another tuple once refcount has dropped to zero. Hence, a bpf_ct_kptr_get helper not only needs to call refcount_inc_not_zero, but also do a tuple match after incrementing the reference, and when it fails to match it, put the reference again and return NULL. This can be implemented easily if we allow passing additional parameters to the bpf_ct_kptr_get kfunc, like a struct bpf_sock_tuple * and a tuple__sz pair. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
A destructor kfunc can be defined as void func(type *), where type may be void or any other pointer type as per convenience. In this patch, we ensure that the type is sane and capture the function pointer into off_desc of ptr_off_tab for the specific pointer offset, with the invariant that the dtor pointer is always set when 'kptr_ref' tag is applied to the pointer's pointee type, which is indicated by the flag BPF_MAP_VALUE_OFF_F_REF. Note that only BTF IDs whose destructor kfunc is registered, thus become the allowed BTF IDs for embedding as referenced kptr. Hence it serves the purpose of finding dtor kfunc BTF ID, as well acting as a check against the whitelist of allowed BTF IDs for this purpose. Finally, wire up the actual freeing of the referenced pointer if any at all available offsets, so that no references are leaked after the BPF map goes away and the BPF program previously moved the ownership a referenced pointer into it. The behavior is similar to BPF timers, where bpf_map_{update,delete}_elem will free any existing referenced kptr. The same case is with LRU map's bpf_lru_push_free/htab_lru_push_free functions, which are extended to reset unreferenced and free referenced kptr. Note that unlike BPF timers, kptr is not reset or freed when map uref drops to zero. Signed-off-by: -
Kumar Kartikeya Dwivedi authored
To support storing referenced PTR_TO_BTF_ID in maps, we require associating a specific BTF ID with a 'destructor' kfunc. This is because we need to release a live referenced pointer at a certain offset in map value from the map destruction path, otherwise we end up leaking resources. Hence, introduce support for passing an array of btf_id, kfunc_btf_id pairs that denote a BTF ID and its associated release function. Then, add an accessor 'btf_find_dtor_kfunc' which can be used to look up the destructor kfunc of a certain BTF ID. If found, we can use it to free the object from the map free path. The registration of these pairs also serve as a whitelist of structures which are allowed as referenced PTR_TO_BTF_ID in a BPF map, because without finding the destructor kfunc, we will bail and return an error. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Since now there might be at most 10 offsets that need handling in copy_map_value, the manual shuffling and special case is no longer going to work. Hence, let's generalise the copy_map_value function by using a sorted array of offsets to skip regions that must be avoided while copying into and out of a map value. When the map is created, we populate the offset array in struct map, Then, copy_map_value uses this sorted offset array is used to memcpy while skipping timer, spin lock, and kptr. The array is allocated as in most cases none of these special fields would be present in map value, hence we can save on space for the common case by not embedding the entire object inside bpf_map struct. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
While we can guarantee that even for unreferenced kptr, the object pointer points to being freed etc. can be handled by the verifier's exception handling (normal load patching to PROBE_MEM loads), we still cannot allow the user to pass these pointers to BPF helpers and kfunc, because the same exception handling won't be done for accesses inside the kernel. The same is true if a referenced pointer is loaded using normal load instruction. Since the reference is not guaranteed to be held while the pointer is used, it must be marked as untrusted. Hence introduce a new type flag, PTR_UNTRUSTED, which is used to mark all registers loading unreferenced and referenced kptr from BPF maps, and ensure they can never escape the BPF program and into the kernel by way of calling stable/unstable helpers. In check_ptr_to_btf_access, the !type_may_be_null check to reject type flags is still correct, as apart from PTR_MAYBE_NULL, only MEM_USER, MEM_PERCPU, and PTR_UNTRUSTED may be set for PTR_TO_BTF_ID. The first two are checked inside the function and rejected using a proper error message, but we still want to allow dereference of untrusted case. Also, we make sure to inherit PTR_UNTRUSTED when chain of pointers are walked, so that this flag is never dropped once it has been set on a PTR_TO_BTF_ID (i.e. trusted to untrusted transition can only be in one direction). In convert_ctx_accesses, extend the switch case to consider untrusted PTR_TO_BTF_ID in addition to normal PTR_TO_BTF_ID for PROBE_MEM conversion for BPF_LDX. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Extending the code in previous commits, introduce referenced kptr support, which needs to be tagged using 'kptr_ref' tag instead. Unlike unreferenced kptr, referenced kptr have a lot more restrictions. In addition to the type matching, only a newly introduced bpf_kptr_xchg helper is allowed to modify the map value at that offset. This transfers the referenced pointer being stored into the map, releasing the references state for the program, and returning the old value and creating new reference state for the returned pointer. Similar to unreferenced pointer case, return value for this case will also be PTR_TO_BTF_ID_OR_NULL. The reference for the returned pointer must either be eventually released by calling the corresponding release function, otherwise it must be transferred into another map. It is also allowed to call bpf_kptr_xchg with a NULL pointer, to clear the value, and obtain the old value if any. BPF_LDX, BPF_STX, and BPF_ST cannot access referenced kptr. A future commit will permit using BPF_LDX for such pointers, but attempt at making it safe, since the lifetime of object won't be guaranteed. There are valid reasons to enforce the restriction of permitting only bpf_kptr_xchg to operate on referenced kptr. The pointer value must be consistent in face of concurrent modification, and any prior values contained in the map must also be released before a new one is moved into the map. To ensure proper transfer of this ownership, bpf_kptr_xchg returns the old value, which the verifier would require the user to either free or move into another map, and releases the reference held for the pointer being moved in. In the future, direct BPF_XCHG instruction may also be permitted to work like bpf_kptr_xchg helper. Note that process_kptr_func doesn't have to call check_helper_mem_access, since we already disallow rdonly/wronly flags for map, which is what check_map_access_type checks, and we already ensure the PTR_TO_MAP_VALUE refers to kptr by obtaining its off_desc, so check_map_access is also not required. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Add a new type flag for bpf_arg_type that when set tells verifier that for a release function, that argument's register will be the one for which meta.ref_obj_id will be set, and which will then be released using release_reference. To capture the regno, introduce a new field release_regno in bpf_call_arg_meta. This would be required in the next patch, where we may either pass NULL or a refcounted pointer as an argument to the release function bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not enough, as there is a case where the type of argument needed matches, but the ref_obj_id is set to 0. Hence, we must enforce that whenever meta.ref_obj_id is zero, the register that is to be released can only be NULL for a release function. Since we now indicate whether an argument is to be released in bpf_func_proto itself, is_release_function helper has lost its utitlity, hence refactor code to work without it, and just rely on meta.release_regno to know when to release state for a ref_obj_id. Still, the restriction of one release argument and only one ref_obj_id passed to BPF helper or kfunc remains. This may be lifted in the future. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This commit introduces a new pointer type 'kptr' which can be embedded in a map value to hold a PTR_TO_BTF_ID stored by a BPF program during its invocation. When storing such a kptr, BPF program's PTR_TO_BTF_ID register must have the same type as in the map value's BTF, and loading a kptr marks the destination register as PTR_TO_BTF_ID with the correct kernel BTF and BTF ID. Such kptr are unreferenced, i.e. by the time another invocation of the BPF program loads this pointer, the object which the pointer points to may not longer exist. Since PTR_TO_BTF_ID loads (using BPF_LDX) are patched to PROBE_MEM loads by the verifier, it would safe to allow user to still access such invalid pointer, but passing such pointers into BPF helpers and kfuncs should not be permitted. A future patch in this series will close this gap. The flexibility offered by allowing programs to dereference such invalid pointers while being safe at runtime frees the verifier from doing complex lifetime tracking. As long as the user may ensure that the object remains valid, it can ensure data read by it from the kernel object is valid. The user indicates that a certain pointer must be treated as kptr capable of accepting stores of PTR_TO_BTF_ID of a certain type, by using a BTF type tag 'kptr' on the pointed to type of the pointer. Then, this information is recorded in the object BTF which will be passed into the kernel by way of map's BTF information. The name and kind from the map value BTF is used to look up the in-kernel type, and the actual BTF and BTF ID is recorded in the map struct in a new kptr_off_tab member. For now, only storing pointers to structs is permitted. An example of this specification is shown below: #define __kptr __attribute__((btf_type_tag("kptr"))) struct map_value { ... struct task_struct __kptr *task; ... }; Then, in a BPF program, user may store PTR_TO_BTF_ID with the type task_struct into the map, and then load it later. Note that the destination register is marked PTR_TO_BTF_ID_OR_NULL, as the verifier cannot know whether the value is NULL or not statically, it must treat all potential loads at that map value offset as loading a possibly NULL pointer. Only BPF_LDX, BPF_STX, and BPF_ST (with insn->imm = 0 to denote NULL) are allowed instructions that can access such a pointer. On BPF_LDX, the destination register is updated to be a PTR_TO_BTF_ID, and on BPF_STX, it is checked whether the source register type is a PTR_TO_BTF_ID with same BTF type as specified in the map BTF. The access size must always be BPF_DW. For the map in map support, the kptr_off_tab for outer map is copied from the inner map's kptr_off_tab. It was chosen to do a deep copy instead of introducing a refcount to kptr_off_tab, because the copy only needs to be done when paramterizing using inner_map_fd in the map in map case, hence would be unnecessary for all other users. It is not permitted to use MAP_FREEZE command and mmap for BPF map having kptrs, similar to the bpf_timer case. A kptr also requires that BPF program has both read and write access to the map (hence both BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG are disallowed). Note that check_map_access must be called from both check_helper_mem_access and for the BPF instructions, hence the kptr check must distinguish between ACCESS_DIRECT and ACCESS_HELPER, and reject ACCESS_HELPER cases. We rename stack_access_src to bpf_access_src and reuse it for this purpose. Signed-off-by: -
Stanislav Fomichev authored
Rename bpf_prog_run_array_cg_flags to bpf_prog_run_array_cg and use it everywhere. check_return_code already enforces sane return ranges for all cgroup types. (only egress and bind hooks have uncanonical return ranges, the rest is using [0, 1]) No functional changes. v2: - 'func_ret & 1' under explicit test (Andrii & Martin) Suggested-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
- 25 Apr, 2022 3 commits
-
-
Dominique Martinet authored
musl does not like including sys/fcntl.h directly: [...] 1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [...] Signed-off-by:Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220424051022.2619648-5-asmadeus@codewreck.org
-
Dominique Martinet authored
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been multiple attempts at pushing the feature in musl upstream, but it has been refused or ignored all the times: https://www.openwall.com/lists/musl/2021/03/26/1 https://www.openwall.com/lists/musl/2022/01/22/1 In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult to reimplement directly instead, and the new implementation makes 'bpftool perf' slightly faster because it doesn't needlessly stat/readdir unneeded directories (54ms -> 13ms on my machine). Signed-off-by:
-
Yuntao Wang authored
The link variable is already of type 'struct bpf_link *', casting it to 'struct bpf_link *' is redundant, drop it. Signed-off-by:
Yuntao Wang <ytcoode@gmail.com> Signed-off-by:
-
- 22 Apr, 2022 4 commits
-
-
Andrii Nakryiko authored
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs. Signed-off-by:
Kui-Feng Lee <kuifeng@fb.com> Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
-
Andrii Nakryiko authored
Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on older kernels for programs that are attachable through BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and convenient interface for creating bpf_link-based attachments. With this approach end users can just use bpf_link_create() for tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to care about kernel support, as libbpf will handle this transparently. On the other hand, as newer features (like BPF cookie) are added to LINK_CREATE interface, they will be readily usable though the same bpf_link_create() API without any major refactoring from user's standpoint. bpf_program__attach_btf_id() is now using bpf_link_create() internally as well and will take advantaged of this unified interface when BPF cookie is added for fentry/fexit. Doing proactive feature detection of LINK_CREATE support for fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF, determining some stable and guaranteed to be in all kernels versions target BTF type (either raw tracepoint or fentry target function), actually attaching this program and thus potentially affecting the performance of the host kernel briefly, etc. So instead we are taking much simpler "lazy" approach of falling back to bpf_raw_tracepoint_open() call only if initial LINK_CREATE command fails. For modern kernels this will mean zero added overhead, while older kernels will incur minimal overhead with a single fast-failing LINK_CREATE call. Signed-off-by:
-
Andrii Nakryiko authored
Allow attaching BTF-aware TRACING programs, previously attachable only through BPF_RAW_TRACEPOINT_OPEN command, through LINK_CREATE command: - BTF-aware raw tracepoints (tp_btf in libbpf lingo); - fentry/fexit/fmod_ret programs; - BPF LSM programs. This change converges all bpf_link-based attachments under LINK_CREATE command allowing to further extend the API with features like BPF cookie under "multiplexed" link_create section of bpf_attr. Non-BTF-aware raw tracepoints are left under BPF_RAW_TRACEPOINT_OPEN, but there is nothing preventing opening them up to LINK_CREATE as well. Signed-off-by:
-
Grant Seltzer authored
This puts the link for libbpf API documentation into the sidebar for much easier navigation. You can preview this change at: https://libbpf-test.readthedocs.io/en/latest/ Note that the link is hardcoded to the production version, so you can see that it self references itself here for now: https://libbpf-test.readthedocs.io/en/latest/api.html This will need to make its way into the libbpf mirror, before being deployed to libbpf.readthedocs.org Signed-off-by:
Grant Seltzer <grantseltzer@gmail.com> Signed-off-by:
-
- 21 Apr, 2022 9 commits
-
-
Gaosheng Cui authored
Obj_elf is already non-null checked at the function entry, so remove redundant non-null checks on obj_elf. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Artem Savkov authored
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error reporting changed. Instead of setting errno and returning -1 bpf calls now return -Exxx directly. Drop errno checks and look at return code directly. Fixes: b858ba8c ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
-
Artem Savkov authored
I am getting the following compilation error for prog_tests/uprobe_autoattach.c: tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’: ./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free] The value of mem is now used in one of the asserts, which is why it may be confusing compilers. However, it is not dereferenced. Silence this by moving free(mem) after the assert block. Fixes: 1717e248 ("selftests/bpf: Uprobe tests should verify param/return values") Signed-off-by:
-
Artem Savkov authored
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they check for return of bpf_prog_attach to be exactly -1. Switch the check to '< 0' instead. Fixes: b858ba8c ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by:
-
Maciej Fijalkowski authored
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> I40E_XDP_{REDIR,CONSUMED} XDP_TX -> I40E_XDP_{TX,CONSUMED} XDP_DROP -> I40E_XDP_CONSUMED XDP_ABORTED -> I40E_XDP_CONSUMED XDP_PASS -> I40E_XDP_PASS Commit b8aef650 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> I40E_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid I40E_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: b8aef650 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by:Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
Maciej Fijalkowski authored
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED} XDP_TX -> IXGBE_XDP_{TX,CONSUMED} XDP_DROP -> IXGBE_XDP_CONSUMED XDP_ABORTED -> IXGBE_XDP_CONSUMED XDP_PASS -> IXGBE_XDP_PASS Commit c7dd09fd ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> IXGBE_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: c7dd09fd ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: -
Kumar Kartikeya Dwivedi authored
Some functions in next patch want to use this function, and those functions will be called by check_map_access, hence move it before check_map_access. Signed-off-by:
Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/bpf/20220415160354.1050687-3-memxor@gmail.com
-
Kumar Kartikeya Dwivedi authored
Next commit introduces field type 'kptr' whose kind will not be struct, but pointer, and it will not be limited to one offset, but multiple ones. Make existing btf_find_struct_field and btf_find_datasec_var functions amenable to use for finding kptrs in map value, by moving spin_lock and timer specific checks into their own function. The alignment, and name are checked before the function is called, so it is the last point where we can skip field or return an error before the next loop iteration happens. Size of the field and type is meant to be checked inside the function. Signed-off-by:
-
Grant Seltzer authored
This adds documentation for the following API functions: - bpf_program__set_expected_attach_type() - bpf_program__set_type() - bpf_program__set_attach_target() - bpf_program__attach() - bpf_program__pin() - bpf_program__unpin() Signed-off-by:
-
