These clever macros were fine for early development, but they're
more of a distraction now.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is an old patch that I neglected to send out.  It's cleaning
up a couple things that got committed before I had a chance to
comment on them.

In operation.c there is a "FIXME" comment that is easily proven
wrong by inspection.

In gb_protocol_put(), there is another wrong "FIXME" comment as
well.  We can also use our cached copies of the protocol major
and minor version number in another spot.  And balance that
out by using a cached copy of the protocol id.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Merge the es1 log file fixes into master.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

In order to decrement the reference count of module on failures, we must call
put_device(module->dev). This was missing for one of the error cases, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

As mentioned in kernel coding guidelines.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

identify_descriptor() doesn't return 0 anymore and so we don't need to check the
returned value against 0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We are calculating descriptors expected size differently based on the type of
descriptor, that's fine but at few places we aren't taking size of the header
into account. And that looks wrong.

Lets make sure it is atleast as big as descriptor's header.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

If you write 0 to the debugfs file, the log will stop being updated.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

One function shouldn't do two different things depending on a parameter
passed to it, so split usb_log_enable() into usb_log_disable()
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add a blank line in apb1_log_enable_read() to make checkpatch happy.

Oh, and it makes the code more readable too...
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

No need to duplicate built-in functions that the kernel has, so have the
core kernel parse the userspace string.  Saves us an allocation and
makes the logic simpler.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

decimal is not octal, so use the proper mode settings for the debugfs
files.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We aren't changing these pointers, so mark them read-only as that is the
preferred way.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The function can, and even expects NULL, so don't check.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Asm is only for when you are doing arch-specific stuff, which we aren't
doing here.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

No trailing spaces or spaces before tabs are allowed.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

It's "const char __user *buf", not "char __user *buf".

'make check' is your friend.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

On AP module (form factor), we don't have access to APBridge JTAG or UART.
But sometime, we still need to get log from APBridge. Add a new request in control endpoint
to get APBridge logs.
Logs can be accessed using debugfs (greybus/apb1_log).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add error messages on failures to deactivate, set and get operation
handlers as any errors would not be detected by the upper layers (either
because the callbacks are declared void or expected to return a boolean
value).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add warning and refuse to set output value for pin configured as input,
as the result of such an operation is undefined.

Remove incorrect todo-comment suggesting that the driver could
implicitly switch direction as part of the call.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Clean up allocation of line-state array.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Use the more informative dev_err and dev_warn for messages, and make the
messages more uniform.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Make sure to propagate any errors detected up the call chain.

This specifically means that we will detect failed connection init,
something which is now handled more gracefully by greybus core.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Rename all struct gb_gpio_controller-pointer variables "ggc" for
consistency and readability reason.

This also fixes a bunch of lines that exceeded the 80 columns limit.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove unnecessary explicit cast of line value.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove overly defensive argument verification in gpio-chip callbacks. We
should trust gpiolib to get this right (or we would not even get any
callback) just like the other gpio drivers do.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove redundant verification of gpio numbers (which have already been
verified in the gpio-chip callbacks) from greybus-operation helpers.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The module reference count is incremented by gpiolib when a gpio is
requested, and the driver callbacks certainly do sleep.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix set_debounce, which silently truncated the time argument to 255us
even though we support 16-bit values.

Also remove the unnecessary explicit cast when verifying the argument.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove unnecessary cast of the message size in gb_connection_recv.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Use the more informative dev_err in gb_operation_sync, which includes
the connection device name in the error message (which in turn encodes
the module, interface, bundle and cport ids).

Add missing braces to conditional-construct branches while at it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove custom connection error function and replace it with dev_err.

The standard error function provides more information in the message
prefix (e.g. includes the interface id), has a well-known semantics
(e.g. does does not add newlines to messages), and is even somewhat
shorter to type.

Note that some uses of the custom function were already adding double
newlines due to the non-standard semantics.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Return immediately on bundle-init failure when processing SVC link up.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix typo in svc_hotplug comment.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix incorrect SVC handshake protocol check, which would only bail out if
both major and minor protocol versions supported by the SVC differed.

Since we currently only support one version of the protocol, upgrade the
debug message to warning and bail unless the protocol versions match
perfectly for now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This driver is being rewritten, but let's silence a pointer-to-int-cast
compiler warning meanwhile.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

There is no interrupt channel as such and so no need to support
->output_report().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

To follow coding guidelines a bit :)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Also bring * closer to gb_interface_get_drvdata :)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>