Pull SCSI fixes from James Bottomley:
 "This patch set is fixing two serious problems which have turned up
  late in the release cycle.

  The first fixes a problem with 4k sector disks where the transfer
  length (amount of data sent to the disk) was getting increased every
  time the disk was revalidated leading to potential for overflows.

  The other is a regression oops fix for some of our last merge window
  code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sd: Fix max transfer length for 4k disks
  scsi: fix device handler detach oops

Pull drm fixes from Dave Airlie:
 "Radeon and amdkfd fixes.

  Radeon ones mostly for oops in some test/benchmark functions since
  fencing changes, and one regression fix for old GPUs,

  There is one cirrus regression fix, the 32bpp broke userspace, so this
  hides it behind a module option for the few users who care.

  I'm off for a few days, so this is probably the final pull I have, if
  I see fixes from Intel I'll forward the pull as I should have email"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/cirrus: Limit modes depending on bpp option
  drm/radeon: fix the crash in test functions
  drm/radeon: fix the crash in benchmark functions
  drm/radeon: properly set vm fragment size for TN/RL
  drm/radeon: don't init gpuvm if accel is disabled (v3)
  drm/radeon: fix PLLs on RS880 and older v2
  drm/amdkfd: Don't create BUG due to incorrect user parameter
  drm/amdkfd: max num of queues can't be 0
  drm/amdkfd: Fix bug in accounting of queues

Pull spi fixes from Mark Brown:
 "A couple of driver specific fixes:

   - Disable DMA mode for i.MX6DL chips due to a hardware bug.

   - Don't use devm_kzalloc() outside of bind/unbind paths in the
     fsl-dspi driver, fixing memory leaks"

* tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: imx: use pio mode for i.mx6dl
  spi: spi-fsl-dspi: Remove usage of devm_kzalloc

Pull ACPI power management fix from Rafael  Wysocki:
 "This is a revert of an ACPI Low-power Subsystem (LPSS) driver change
  that was supposed to improve power management of the LPSS DMA
  controller, but introduced more serious problems.

  Since fixing them turns out to be non-trivial, it is better to revert
  the commit in question at this point and try to fix the original issue
  differently in the next cycle"

* tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"

Pull PCI fixes from Bjorn Helgaas:
 "Enumeration
    - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson)

  Resource management
    - Handle read-only BARs on AMD CS553x devices (Myron Stowe)

  Synopsys DesignWare
    - Reject MSI-X IRQs (Lucas Stach)"

* tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Handle read-only BARs on AMD CS553x devices
  PCI: Add NEC variants to Stratus ftServer PCIe DMI check
  PCI: designware: Reject MSI-X IRQs

The commit [8975626e: drm/cirrus: allow 32bpp framebuffers for
cirrus drm] broke X modesetting driver because cirrus driver still
provides the full list of modes up to 1280x1024 while the 32bpp can
support only up to 800x600.

We might be able to filter out the invalid modes in mode_valid
callback, but unfortunately the bpp in question can't be referred
there for now (let me know if there is a better way to retrieve the
bpp for the probed fb).

So, instead, this patch adds the bpp module option to specify the
maximal bpp explicitly and limits the resolutions in get_modes
depending on its value.

The default value is set to 24 so that the existing stuff keeps
working.  If you need a new 32bpp feature, specify cirrus.bpp=32
option explicitly.

Fixes: 8975626e ('drm/cirrus: allow 32bpp framebuffers for cirrus drm')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull cifs fixes from Steve French:
 "Three small cifs fixes.  One fixes a hang under stress, and the other
  two are security related"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix MUST SecurityFlags filtering
  Complete oplock break jobs before closing file handle
  cifs: use memzero_explicit to clear stack buffer

Pull ARM fixes from Russell King:
 "A number of ARM fixes, the biggest is fixing a regression caused by
  appended DT blobs exceeding 64K, causing the decompressor fixup code
  to fail to patch the DT blob.  Another important fix is for the ASID
  allocator from Will Deacon which prevents some rare crashes seen on
  some systems.  Lastly, there's a build fix for v7M systems when printk
  support is disabled.

  The last two remaining fixes are more cosmetic - the IOMMU one
  prevents an annoying harmless warning message, and we disable the
  kernel strict memory permissions on non-MMU which can't support it
  anyway"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
  ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
  ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
  ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
  ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown

Pull infiniband reverts from Roland Dreier:
 "Last minute InfiniBand/RDMA changes for 3.19:

   - Revert IPoIB driver back to 3.18 state.  We had a number of fixes
     go into 3.19, but they introduced regressions.  We tried to get
     everything fixed up but ran out of time, so we'll try again for
     3.20.

   - Similarly, turn off the new "extended query port" verb.  Late in
     the cycle we realized the ABI is not quite right, and rather than
     freeze something in a rush and make a mistake, we'll take a bit
     more time and get it right in 3.20"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Temporarily disable ex_query_device uverb
  Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue"
  Revert "IPoIB: Make the carrier_on_task race aware"
  Revert "IPoIB: fix MCAST_FLAG_BUSY usage"
  Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race"
  Revert "IPoIB: change init sequence ordering"
  Revert "IPoIB: Use dedicated workqueues per interface"
  Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue"
  Revert "IPoIB: No longer use flush as a parameter"

Pull two fixes for md from Neil Brown:

 - Another live lock, needs backporting

 - work-around false positive with new warnings.

* tag 'md/3.19-fixes' of git://neil.brown.name/md:
  md/bitmap: fix a might_sleep() warning.
  md/raid5: fix another livelock caused by non-aligned writes.

Some AMD CS553x devices have read-only BARs because of a firmware or
hardware defect.  There's a workaround in quirk_cs5536_vsa(), but it no
longer works after 36e81648 ("PCI: Restore detection of read-only
BARs").  Prior to 36e81648, we filled in res->start; afterwards we
leave it zeroed out.  The quirk only updated the size, so the driver tried
to use a region starting at zero, which didn't work.

Expand quirk_cs5536_vsa() to read the base addresses from the BARs and
hard-code the sizes.

On Nix's system BAR 2's read-only value is 0x6200.  Prior to 36e81648,
we interpret that as a 512-byte BAR based on the lowest-order bit set.  Per
datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to
avoid clearing any address bits if a platform uses only 64-byte alignment.

[bhelgaas: changelog, reduce BAR 2 size to 64]
Fixes: 36e81648 ("PCI: Restore detection of read-only BARs")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4
Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf
Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdfReported-and-tested-by: Nix <nix@esperi.org.uk>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v.2.6.27+

Pull final block layer fixes from Jens Axboe:
 "Unfortunately the hctx/ctx lifetime fix from last pull had some
  issues.  This pull request contains a revert of the problematic
  commit, and a proper rewrite of it.

  The rewrite has been tested by the users complaining about the
  regression, and it works fine now.  Additionally, I've run testing on
  all the blk-mq use cases for it and it passes.  So we should
  definitely get this into 3.19, to avoid regression for some cases"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: release mq's kobjects in blk_release_queue()
  Revert "blk-mq: fix hctx/ctx kobject use-after-free"

Pull gpio fixes from Linus Walleij:
 "Yet more GPIO fixes for the v3.19 series.

  There is a high bug-spot activity in GPIO this merge window, much due
  to Johan Hovolds spearheading into actually exercising the removal
  path for GPIO chips, something that was never really exercised before.

  The other two fixes are augmenting erroneous behaviours in two
  specific drivers for minor systems.

  Summary from signed tag:

   - Two fixes stabilizing that which was never stable before: removal
     of GPIO chips, now let's stop leaking memory.
   - Make sure OMAP IRQs are usable when the irqchip API is used
     orthogonally to the gpiochip API.
   - Provide a default GPIO base for the mcp23s08 driver"

* tag 'gpio-v3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low
  gpio: sysfs: fix memory leak in gpiod_export_link
  gpio: mcp23s08: handle default gpio base
  gpio: omap: Fix bad device access with setup_irq()

Commit 5a77abf9 ("IB/core: Add support for extended query device caps")
added a new extended verb to query the capabilities of RDMA devices, but the
semantics of this verb are still under debate [1].

Don't expose this verb to userspace until the ABI is nailed down.

[1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19
    http://www.spinics.net/lists/linux-rdma/msg22904.htmlSigned-off-by: Haggai Eran <haggaie@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Revert commit 6c17ee44 (ACPI / LPSS: introduce a 'proxy' device
to power on LPSS for DMA), as it introduced registration and probe
ordering problems between devices on the LPSS that may lead to full
hard system hang on boot in some cases.

Commit e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0
when running with LPAE") removed the use of the reserved TTBR0 value
for LPAE systems, since the ASID is held in the TTBR and can be updated
atomicly with the pgd of the next mm.

Unfortunately, this patch forgot to update flush_context, which
deliberately avoids marking the local active ASID as allocated, since we
used to switch via ASID zero and didn't need to allocate the ASID of
the previous mm. The side-effect of this is that we can allocate the
same ASID to the next mm and, between flushing the local TLB and updating
TTBR0, we can perform speculative TLB fills for userspace nG mappings
using the page table of the previous mm.

The consequence of this is that the next mm can erroneously hit some
mappings of the previous mm. Note that this was made significantly
harder to hit by a391263c ("ARM: 8203/1: mm: try to re-use old ASID
assignments following a rollover") but is still theoretically possible.

This patch fixes the problem by removing the code from flush_context
that forces the allocated ASID to zero for the local CPU. Many thanks
to the Broadcom guys for tracking this one down.

Fixes: e1a5848e ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE")

Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Raymond Ngun <rngun@broadcom.com>
Tested-by: Raymond Ngun <rngun@broadcom.com>
Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

For TKT238285 hardware issue which may cause txfifo store data twice can only
be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.

Fixes: f62caccd (spi: spi-imx: add DMA support)
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Merge tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes

Three small fixes that came up during last week, nothing scary:

- Accidently incremented a counter instead of decrementing it (copy-paste error)
- Module parameter of max num of queues must be at least 1 and not 0
- Don't do BUG() as a result from wrong user input

* tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Don't create BUG due to incorrect user parameter
  drm/amdkfd: max num of queues can't be 0
  drm/amdkfd: Fix bug in accounting of queues

One last round of fixes for radeon for 3.19:
- fix some fallout from the reservation object integration on the
  test/benchmark options
- fix a crash in the gpu vm code if gfx init fails
- fix a pll issue that leads to a blank screen on older IGP parts

* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix the crash in test functions
  drm/radeon: fix the crash in benchmark functions
  drm/radeon: properly set vm fragment size for TN/RL
  drm/radeon: don't init gpuvm if accel is disabled (v3)
  drm/radeon: fix PLLs on RS880 and older v2

radeon_copy_dma and radeon_copy_blit must be called with
a valid reservation object. Otherwise a crash will be provoked.
We borrow the object from vram BO.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=88464

Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon_copy_dma and radeon_copy_blit must be called with
a valid reservation object. Otherwise a crash will be provoked.
We borrow the object from destination BO.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=88464

Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Should be the same as cayman.  We don't use VM by default
on NI parts so this isn't critical.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If acceleration is disabled, it does not make sense
to init gpuvm since nothing will use it.  Moreover,
if radeon_vm_init() gets called it uses accel to try
and clear the pde tables, etc. which results in a bug.

v2: handle vm_fini as well
v3: handle bo_open/close as well

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=88786Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is a workaround for RS880 and older chips which seem to have
an additional limit on the minimum PLL input frequency.

v2: fix signed/unsigned warning

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=91861
https://bugzilla.kernel.org/show_bug.cgi?id=83461Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

NEC OEMs the same platforms as Stratus does, which have multiple devices on
some PCIe buses under downstream ports.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331
Fixes: 1278998f ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)")
Signed-off-by: Charlotte Richardson <charlotte.richardson@stratus.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.5+
CC: Myron Stowe <myron.stowe@redhat.com>

The following patch fixes an issue observed with 4k sector disks
where the max_hw_sectors attribute was getting set too large in
sd_revalidate_disk. Since sdkp->max_xfer_blocks is in units
of SCSI logical blocks and queue_max_hw_sectors is in units of
512 byte blocks, on a 4k sector disk, every time we went through
sd_revalidate_disk, we were taking the current value of
queue_max_hw_sectors and increasing it by a factor of 8. Fix
this by only shifting sdkp->max_xfer_blocks.

Cc: stable@vger.kernel.org
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This fixes a regression caused by commit 1d5203 ("scsi: handle more device
handler setup/teardown in common code").

The bug is that the alua detach() callout will try to access the
sddev->scsi_dh_data, but we have already set it to NULL. This patch
moves the clearing of that field to after detach() is called.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch changes a BUG_ON() statement to pr_debug, in case the user tries to
update a non-existing queue.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

commit 8eb23b9f
    sched: Debug nested sleeps

causes false-positive warnings in RAID5 code.

This annotation removes them and adds a comment
explaining why there is no real problem.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>

If a non-page-aligned write is destined for a device which
is missing/faulty, we can deadlock.

As the target device is missing, a read-modify-write cycle
is not possible.
As the write is not for a full-page, a recontruct-write cycle
is not possible.

This should be handled by logic in fetch_block() which notices
there is a non-R5_OVERWRITE write to a missing device, and so
loads all blocks.

However since commit 67f45548, that code requires
STRIPE_PREREAD_ACTIVE before it will active, and those circumstances
never set STRIPE_PREREAD_ACTIVE.

So: in handle_stripe_dirtying, if neither rmw or rcw was possible,
set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set
after a suitable delay.

Fixes: 67f45548
Cc: stable@vger.kernel.org (v3.16+)
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>

Pull ARM SoC fixes from Olof Johansson:
 "One more week's worth of fixes.  Worth pointing out here are:

   - A patch fixing detaching of iommu registrations when a device is
     removed -- earlier the ops pointer wasn't managed properly
   - Another set of Renesas boards get the same GIC setup fixup as
     others have in previous -rcs
   - Serial port aliases fixups for sunxi.  We did the same to tegra but
     we caught that in time before the merge window due to more machines
     being affected.  Here it took longer for anyone to notice.
   - A couple more DT tweaks on sunxi
   - A follow-up patch for the mvebu coherency disabling in last -rc
     batch"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
  ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
  ARM: sunxi: dt: Fix aliases
  ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
  ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
  ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i

Pull input layer updates from Dmitry Torokhov:
 "Just a few quirks for PS/2 this time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - add more Fujtisu notebooks to force crc_enabled
  Input: i8042 - add noloop quirk for Medion Akoya E7225 (MD98857)
  Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2nd

Commit 8eb23b9f ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.

However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).

And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.

In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont.  But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.

This fixes both cases:

 - don't set TASK_RUNNING when the nested condition happens (note: even
   if WARN_ONCE() only _warns_ once, the return value isn't whether the
   warning happened, but whether the condition for the warning was true.
   So despite the warning only happening once, the "if (WARN_ON(..))"
   would trigger for every nested sleep.

 - in the cases where we knowingly disable the warning by using
   "sched_annotate_sleep()", don't change the task state (that is used
   for all core scheduling decisions), instead use '->task_state_change'
   that is used for the debugging decision itself.

(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Rafael J Wysocki <rjw@rjwysocki.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Ilya Dryomov <ilya.dryomov@inktank.com>,
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Cc: Davidlohr Bueso <dave@stgolabs.net>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add two more Fujitsu LIFEBOOK models that also ship with the Elantech
touchpad and don't work with crc_disabled to the quirk list.
Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:

* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4

* tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>