- 06 Jul, 2020 13 commits
-
-
Alexander Lobakin authored
To not mix functional and stylistic changes, correct indentation of code that will be modified in the subsequent commits. Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Lobakin authored
Get rid of the kernel-doc warnings when building with W=1+ by rewriting the problematic doc comments according to the recommended format and style. Note that this only fixes problems found in C source files, headers aren't in scope for now. Signed-off-by:
-
Alexander Lobakin authored
Change the prototype of qed_hw_err_notify() with the following: * constify "fmt" argument according to printk() declarations; * anontate it with __cold attribute to move the function out of the line; * annotate it with __printf() attribute; This eliminates W=1+ warning: drivers/net/ethernet/qlogic/qed/qed_hw.c: In function ‘qed_hw_err_notify’: drivers/net/ethernet/qlogic/qed/qed_hw.c:851:3: warning: function ‘qed_hw_err_notify’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vsnprintf(buf, QED_HW_ERR_MAX_STR_SIZE, fmt, vl); ^~~ as well as saves some code size: add/remove: 0/0 grow/shrink: 2/4 up/down: 40/-125 (-85) Function old new delta qed_dmae_execute_command 1680 1711 +31 qed_spq_post 1104 1113 +9 qed_int_sp_dpc 3554 3545 -9 qed_mcp_cmd_and_union 1896 1876 -20 qed_hw_err_notify 395 352 -43 qed_mcp_handle_events 2630 2577 -53 Total: Before=368645, After=368560, chg -0.02% __printf() will also be helpful with catching bad format strings and arguments. Signed-off-by:
-
Alexander Lobakin authored
Fix several sparse warnings by moving structs declarations into the corresponding header files: drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning: symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol 'qed_ll2_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol 'qed_ptp_ops_pass' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning: symbol 'qed_iov_ops_pass' was not declared. Should it be static? (some of them were declared twice in different header files) Also make qed_hw_err_type_descr[] const while at it. Signed-off-by:
-
Alexander Lobakin authored
Static variables (and functions, unless they're inline) should not be declared in header files. Move the static array iro_arr[] from "qed_hsi.h" to the sole place where it's used, "qed_init_ops.c". This eliminates lots of warnings (42 of them actually) against W=1+: In file included from drivers/net/ethernet/qlogic/qed/qed.h:51:0, from drivers/net/ethernet/qlogic/qed/qed_ooo.c:40: drivers/net/ethernet/qlogic/qed/qed_hsi.h:4421:18: warning: 'iro_arr' defined but not used [-Wunused-const-variable=] static const u32 iro_arr[] = { ^~~~~~~ Signed-off-by: -
Sabrina Dubroca authored
This patch adds a new structure geneve_config and moves the per-device configuration attributes to it, like we already have in VXLAN with struct vxlan_config. This ends up being pretty invasive since those attributes are used everywhere. This allows us to clean up the argument lists for geneve_configure (4 arguments instead of 8) and geneve_nl2info (5 instead of 9). This also reduces the copy-paste of code setting those attributes between geneve_configure and geneve_changelink to a single memcpy, which would have avoided the bug fixed in commit 56c09de3 ("geneve: allow changing DF behavior after creation"). Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Ioana Ciornei authored
On link down, the draining of the S/G cache should be done on all _possible_ CPUs not just the ones that are online in that moment. Fix this by changing the iterator. Fixes: d70446ee ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Tang Bin authored
The variable 'err = -ENODEV;' in au1000_probe() is duplicate, so remove redundant one. And remove the extra blank lines in the file au1000_eth.c Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
-
Matthieu Baerts authored
When investigating performance issues that involve latency / loss / reordering it is useful to have the pcap from the sender-side as it allows to easier infer the state of the sender's congestion-control, loss-recovery, etc. Allow the selftests to capture a pcap on both sender and receiver so that this information is not lost when reproducing. This patch also improves the file names. Instead of: ns4-5ee79a56-X4O6gS-ns3-5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap We now have something like for the same test: 5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap 5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap It was a connection from ns3 to ns4, better to start with ns3 then. The port is also added, easier to find the trace we want. Co-developed-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
David S. Miller authored
Vaibhav Gupta says: ==================== ethernet: sun: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from sun ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. ==================== Signed-off-by: -
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was calling pci_save/restore_state() which is no more needed. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. And they use PCI helper functions to do it. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In this driver: gem_suspend() calls gem_do_stop() which in turn invokes pci_disable_device(). As the PCI helper function is not called at the end/start of the function body, breaking the function in two parts may change its behavior. The only other function invoking gem_do_stop() is gem_close(). Hence, gem_close() and gem_suspend() can do the required end steps on their own. The same case is with gem_resume(). Both gem_resume() and gem_open() invoke gem_do_start(). Again, make the caller functions do the required steps on their own. Compile-tested only. Signed-off-by:
-
- 05 Jul, 2020 27 commits
-
-
Andrew Lunn authored
The comments before struct vsc73xx_platform and struct vsc73xx_spi use kerneldoc format, but then fail to document the members of these structures. All the structure members are self evident, and the driver has not other kerneldoc comments, so change these to plain comments to avoid warnings. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Since lan9303_adjust_link() is a void function, there is no option to return an error. So just remove the variable and lets any errors be discarded. Cc: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by:
-
Andrew Lunn authored
Oddly, GENMASK() requires signed bit numbers, so that it can compare them for < 0. If passed an unsigned type, we get warnings about the test never being true. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== dsa: b53/sf2 Fixup most of the C=1 W=1 warnings in these drivers. ==================== Signed-off-by: -
Andrew Lunn authored
Oddly, GENMASK() requires signed bit numbers, so that it can compare them for < 0. If passed an unsigned type, we get warnings about the test never being true. There is no danger of overflow here, udf is always a u8, so there is plenty of space when expanding to an int. Signed-off-by:
-
Andrew Lunn authored
A __be16 variable should be initialised with a __be16 value. So add a htons(). In this case it is pointless, given the value being assigned is 0xffff, but it stops sparse from warnings. Signed-off-by:
-
Andrew Lunn authored
leX_to_cpu() expects to be passed an __leX type. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net: dsa: mv88e6xxx: Fixup C=1 W=1 warnings Make the mv88e6xxx driver build cleanly with C=1 W=1. ==================== Signed-off-by: -
Andrew Lunn authored
Correct parameters and add the missing ones. Signed-off-by:
-
Andrew Lunn authored
We don't act on any errors reading registers while handling watchdog interrupt. Since this is an interrupt handler, we cannot return such errors. So just remove the variable. Signed-off-by:
-
Andrew Lunn authored
The flow spec member vlan_tci is in network order. Hence comparisons should be made again network order values. Signed-off-by:
-
Andrew Lunn authored
Oddly, GENMASK() requires signed bit numbers, so that it can compare them for < 0. If passed an unsigned type, we get warnings about the test never being true. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net: dsa: Fix C=1 W=1 warnings Mostly not using __be16 when decoding packet contents. ==================== Signed-off-by: -
Andrew Lunn authored
net/dsa/tag_qca.c:48:15: warning: incorrect type in assignment (different base types) net/dsa/tag_qca.c:48:15: expected unsigned short [usertype] net/dsa/tag_qca.c:48:15: got restricted __be16 [usertype] net/dsa/tag_qca.c:68:13: warning: incorrect type in assignment (different base types) net/dsa/tag_qca.c:68:13: expected restricted __be16 [usertype] hdr net/dsa/tag_qca.c:68:13: got int net/dsa/tag_qca.c:71:16: warning: restricted __be16 degrades to integer net/dsa/tag_qca.c:81:17: warning: restricted __be16 degrades to integer Signed-off-by:
-
Andrew Lunn authored
net/dsa/tag_mtk.c:84:13: warning: incorrect type in assignment (different base types) net/dsa/tag_mtk.c:84:13: expected restricted __be16 [usertype] hdr net/dsa/tag_mtk.c:84:13: got int net/dsa/tag_mtk.c:94:17: warning: restricted __be16 degrades to integer The result of a ntohs() is not __be16, but u16. Signed-off-by:
-
Andrew Lunn authored
net/dsa/tag_lan9303.c:76:24: warning: incorrect type in assignment (different base types) net/dsa/tag_lan9303.c:76:24: expected unsigned short [usertype] net/dsa/tag_lan9303.c:76:24: got restricted __be16 [usertype] net/dsa/tag_lan9303.c:80:24: warning: incorrect type in assignment (different base types) net/dsa/tag_lan9303.c:80:24: expected unsigned short [usertype] net/dsa/tag_lan9303.c:80:24: got restricted __be16 [usertype] net/dsa/tag_lan9303.c:106:31: warning: restricted __be16 degrades to integer net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16 net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16 net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16 net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16 Make use of __be16 where appropriate to fix these warnings. Signed-off-by:
-
Andrew Lunn authored
cpu_to_be16 returns a __be16 value. So what it is assigned to needs to have the same type to avoid warnings. Signed-off-by:
-
Andrew Lunn authored
net/dsa/slave.c:505:13: warning: incorrect type in initializer (different address spaces) net/dsa/slave.c:505:13: expected void const [noderef] <asn:3> *__vpp_verify net/dsa/slave.c:505:13: got struct pcpu_sw_netstats * Add the needed _percpu property to prevent this warning. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Phylink integration improvements for Felix DSA driver This is an overhaul of the Felix switch driver's phylink operations. Patches 1, 3, 4 and 5 are cleanup, patch 2 is adding a new feature and and patch 6 is adaptation to the new format of an existing phylink API (mac_link_up). Changes since v2: - Replaced "PHYLINK" with "phylink". - Rewrote commit message of patch 5/6. Changes since v1: - Now using phy_clear_bits and phy_set_bits instead of plain writes to MII_BMCR. This combines former patches 1/7 and 6/7 into a single new patch 1/6. - Updated commit message of patch 5/6. ==================== Signed-off-by: -
Vladimir Oltean authored
Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Vladimir Oltean authored
Phylink uses the .mac_an_restart method to offer the user an implementation of the "ethtool -r" behavior, when the media-side auto negotiation can be restarted by the local MAC PCS. This is the case for fiber modes 1000Base-X and 2500Base-X (IEEE clause 37) that don't have an Ethernet PHY connected locally, and the media is connected to the MAC PCS directly. On the other hand, the Cisco SGMII and USXGMII standards also have an auto negotiation mechanism based on IEEE 802.3 clause 37 (their respective specs require a MAC PCS and a PHY PCS to implement the same state machine, which is described in IEEE 802.3 "Auto-Negotiation Figure 37-6"), so the ability to restart auto-negotiation is intrinsically symmetrical (the MAC PCS can do it too). However, it appears that not all SGMII/USXGMII PHYs have logic to restart the MDI-side auto-negotiation process when they detect a transition of the SGMII link from data mode to configuration mode. Some do (VSC8234) and some don't (AR8033, MV88E1111). IEEE and/or Cisco specification wordings to not help to prove whether propagating the "AN restart" event from MII side ("mr_restart_an") to MDI side ("mr_restart_negotiation") is required behavior - neither of them specifies any mandatory interaction between the clause 37 AN state machine from Figure 37-6 and the clause 28 AN state machine from Figure 28-18. Therefore, even if a certain behavior could be proven as being required, real-life SGMII/USXGMII PHYs are inconsistent enough that a clause 37 AN restart cannot be used by phylink to reliably trigger a media-side renegotiation, when the user requests it via ethtool. The only remaining use that the .mac_an_restart callback might possibly have, given what we know now, is to implement some silicon quirks, but so far that has proven to not be necessary. So remove this code for now, since it never gets called and we don't foresee any circumstance in which it might be, either. Signed-off-by: -
Vladimir Oltean authored
state->speed holds a value of 10, 100, 1000 or 2500, but SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3. So set the correct speed encoding into this register. Signed-off-by:
-
Vladimir Oltean authored
In VSC9959, the PCS is the one who performs rate adaptation (symbol duplication) to the speed negotiated by the PHY. The MAC is unaware of that and must remain configured for gigabit. If it is configured at OCELOT_SPEED_10 or OCELOT_SPEED_100, it'll start transmitting PAUSE frames out of control and never recover, _even if_ we then reconfigure it at OCELOT_SPEED_1000 afterwards. This patch fixes a bug that luckily did not have any functional impact. We were writing 10, 100, 1000 etc into this 2-bit field in DEV_CLOCK_CFG, but the hardware expects values in the range 0, 1, 2, 3. So all speed values were getting truncated to 0, which is OCELOT_SPEED_2500, and which also appears to be fine. Signed-off-by:
-
Vladimir Oltean authored
Ping tested: [ 11.808455] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.816497] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready [root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x4 [ 18.844591] mscc_felix 0000:00:00.5 swp0: Link is Down [ 22.048337] mscc_felix 0000:00:00.5 swp0: Link is Up - 100Mbps/Half - flow control off [root@LS1028ARDB ~] # ip addr add 192.168.1.1/24 dev swp0 [root@LS1028ARDB ~] # ping 192.168.1.2 PING 192.168.1.2 (192.168.1.2): 56 data bytes (...) ^C--- 192.168.1.2 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max = 0.383/0.611/1.051 ms [root@LS1028ARDB ~] # ethtool -s swp0 advertise 0x10 [ 355.637747] mscc_felix 0000:00:00.5 swp0: Link is Down [ 358.788034] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Half - flow control off [root@LS1028ARDB ~] # ping 192.168.1.2 PING 192.168.1.2 (192.168.1.2): 56 data bytes (...) ^C --- 192.168.1.2 ping statistics --- 16 packets transmitted, 16 packets received, 0% packet loss round-trip min/avg/max = 0.301/0.384/1.138 ms Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vladimir Oltean authored
The driver appears to write to BMCR_SPEED and BMCR_DUPLEX, fields which are read-only, since they are actually configured through the vendor-specific IF_MODE (0x14) register. But the reason we're writing back the read-only values of MII_BMCR is to alter these writable fields: BMCR_RESET BMCR_LOOPBACK BMCR_ANENABLE BMCR_PDOWN BMCR_ISOLATE BMCR_ANRESTART In particular, the only field which is really relevant to this driver is BMCR_ANENABLE. Clarify that intention by spelling it out, using phy_set_bits and phy_clear_bits. The driver also made a few writes to BMCR_RESET and BMCR_ANRESTART which are unnecessary and may temporarily disrupt the link to the PHY. Remove them. Signed-off-by:
-
David S. Miller authored
Vaibhav Gupta says: ==================== qlogic: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from qlogic ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. V2: Fix unused variable warning in v1. ==================== Signed-off-by: -
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and taking care of register states. And they use PCI helper functions to do it. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. .suspend() calls __qlcnic_shutdown, which then calls qlcnic_82xx_shutdown; .resume() calls __qlcnic_resume, which then calls qlcnic_82xx_resume; Both ...82xx..() are define in drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c and are used only in drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c. Hence upgrade them and remove PCI function calls, like pci_save_state() and pci_enable_wake(), inside them Compile-tested only. Signed-off-by:
-
