To protect the command buffer from hanging when a device
does not respond to an IOTLB invalidation, set a timeout of
1s for outstanding IOTLB invalidations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The IOMMUv2 driver added a few statistic counter which are
interesting in the iommu=pt mode too. So initialize the
statistic counter for that mode too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The caches are already flushed in enable_iommus(), so this
flush is not necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This call-back is invoked when the task that is bound to a
pasid is about to exit. The driver can use it to shutdown
all context related to that context in a safe way.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This function can be used to find out which features
necessary for IOMMUv2 usage are available on a given device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The symbolic register names for PCI and PASID changed in
PCI code. This patch adapts the AMD IOMMU driver to these
changes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Conflicts:
	drivers/iommu/amd_iommu.c

This callback can be used to change the PRI response code
sent to a device when a PPR fault fails.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Since pages are not pinned anymore we need notifications
when the VMM changes the page-tables. Use mmu_notifiers for
that.
Also use the task_exit notifier from the profiling subsystem
to shutdown all contexts related to this task.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Register the notifier for PPR faults and handle them as
necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds routines to bind a specific process
address-space to a given PASID.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds the amd_iommu_init_device() and
amd_iommu_free_device() functions which make a device and
the IOMMU ready for IOMMUv2 usage.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Add a Kconfig option for the optional driver. Since it is
optional it can be compiled as a module and will only be
loaded when required by another driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Add some interesting statistic counters for events when
IOMMUv2 is active.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Add infrastructure for errata-handling and handle two known
erratas in the IOMMUv2 code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The AMD IOMMUv2 driver needs to get the IOMMUv2 domain
associated with a particular device. This patch adds a
function to get this information.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

To send completions for PPR requests this patch adds a
function which can be used by the IOMMUv2 driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds functions necessary to set and clear the
GCR3 values associated with a particular PASID in an IOMMUv2
domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

The functions added with this patch allow to manage the
IOMMU and the device TLBs for all devices in an IOMMUv2
domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This patch adds support for protection domains that
implement two-level paging for devices.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This function can be used to switch a domain into
paging-mode 0. In this mode all devices can access physical
system memory directly without any remapping.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Add a notifer at which a module can attach to get informed
about incoming PPR faults.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

If the device starts to use IOMMUv2 features the dma handles
need to stay valid. The only sane way to do this is to use a
identity mapping for the device and not translate it by the
iommu. This is implemented with this patch. Since this lifts
the device-isolation there is also a new kernel parameter
which allows to disable that feature.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

In mixed IOMMU setups this flag inidicates whether an IOMMU
supports the v2 features or not. This patch also adds a
global flag together with a function to query that flag from
other code. The flag shows if at least one IOMMUv2 is in the
system.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

This feature needs to be enabled before IOMMUv2 DTEs can be
set up.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Allocate and enable a log buffer for peripheral page faults
when the IOMMU supports this feature.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Read the number of PASIDs supported by each IOMMU in the
system and take the smallest number as the maximum value
supported by the IOMMU driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Convert the contents of 'struct dev_table_entry' to u64 to
allow updating the DTE wit 64bit writes as required by the
spec.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: check for NULL last_entry before calling cifs_save_resume_key
  cifs: attempt to freeze while looping on a receive attempt
  cifs: Fix sparse warning when calling cifs_strtoUCS
  CIFS: Add descriptions to the brlock cache functions

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Calling __pa() with an ioremap()ed address is invalid
  x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
  x86/intel_mid: Kconfig select fix
  x86/intel_mid: Fix the Kconfig for MID selection

* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6:
  spi/gpio: fix section mismatch warning
  spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build
  spi/nuc900: Include linux/module.h
  spi/ath79: fix compile error due to missing include

* 'for-linus' of git://neil.brown.name/md:
  md: raid5 crash during degradation
  md/raid5: never wait for bad-block acks on failed device.
  md: ensure new badblocks are handled promptly.
  md: bad blocks shouldn't cause a Blocked status on a Faulty device.
  md: take a reference to mddev during sysfs access.
  md: refine interpretation of "hold_active == UNTIL_IOCTL".
  md/lock: ensure updates to page_attrs are properly locked.

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: use new generic {enable,disable}_percpu_irq() routines
  drivers/net/ethernet/tile: use skb_frag_page() API
  asm-generic/unistd.h: support new process_vm_{readv,write} syscalls
  arch/tile: fix double-free bug in homecache_free_pages()
  arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  MAINTAINERS: Update amd-iommu F: patterns
  iommu/amd: Fix typo in kernel-parameters.txt
  iommu/msm: Fix compile error in mach-msm/devices-iommu.c
  Fix comparison using wrong pointer variable in dma debug code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fix lost speaker volume controls
  ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins
  ALSA: hda/realtek - Don't create extra controls with channel suffix
  ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes
  ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs
  ASoC: Provide a more complete DMA driver stub
  ASoC: Remove references to corgi and spitz from machine driver document
  ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C
  ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
  ASoC: uda1380: Return proper error in uda1380_modinit failure path
  ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C
  ASoC: Mark WM8994 ADC muxes as virtual
  ALSA: hda/realtek - Fix Oops in alc_mux_select()
  ALSA: sis7019 - give slow codecs more time to reset

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Do no try to schedule task events if there are none
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  perf header: Use event_name() to get an event name
  perf stat: Failure with "Operation not supported"

In order to safely dereference current->real_parent inside an
rcu_read_lock, we need an rcu_dereference.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Modify initialization of PCIe capability registers in Tsi721 mport driver:
 - change Completion Timeout value to avoid unexpected data transfer
   aborts during intensive traffic.
 - replace hardcoded offset of PCIe capability block by making it use the
   common function.

This patch is applicable to kernel versions starting from 3.2-rc1.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>