- 05 Feb, 2022 26 commits
-
-
Eric Dumazet authored
This fixes minor data-races in ip6_mc_input() and batadv_mcast_mla_rtr_flags_softif_get_ipv6() Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We generally default the vendor to y and the drivers itself to n. NET_DSA_REALTEK, however, selects a whole bunch of things, so it's not a pure "vendor selection" knob. Let's default it all to n. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Russell King (Oracle) authored
Phylink will use PCS polling whenever phylink_config.pcs_poll or the phylink_pcs poll member is set. As this driver sets both, remove the former. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King (Oracle) authored
phylink_set_10g_modes() is no longer used with the conversion of drivers to phylink_generic_validate(), so we can remove it. Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== gro: a couple of minor optimization This series collects a couple of small optimizations for the GRO engine, reducing slightly the number of cycles for dev_gro_receive(). The delta is within noise range in tput tests, but with big TCP coming every cycle saved from the GRO engine will count - I hope ;) v1 -> v2: - a few cleanup suggested from Alexander(s) - moved away the more controversial 3rd patch ==================== Signed-off-by: -
Paolo Abeni authored
While inspecting some perf report, I noticed that the compiler emits suboptimal code for the napi CB initialization, fetching and storing multiple times the memory for flags bitfield. This is with gcc 10.3.1, but I observed the same with older compiler versions. We can help the compiler to do a nicer work clearing several fields at once using an u32 alias. The generated code is quite smaller, with the same number of conditional. Before: objdump -t net/core/gro.o | grep " F .text" 0000000000000bb0 l F .text 0000000000000357 dev_gro_receive After: 0000000000000bb0 l F .text 000000000000033c dev_gro_receive v1 -> v2: - use struct_group (Alexander and Alex) RFC -> v1: - use __struct_group to delimit the zeroed area (Alexander) Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
After commit 5e10da53 ("skbuff: allow 'slow_gro' for skb carring sock reference") and commit af352460 ("net: fix GRO skb truesize update") the truesize of the skb with stolen head is properly updated by the GRO engine, we don't need anymore resetting it at recycle time. v1 -> v2: - clarify the commit message (Alexander) Signed-off-by:
-
Dan Carpenter authored
This is a copy and paste bug. It was supposed to check "clear_skb" instead of "write_skb". Fixes: 2cd54856 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: add support for mcast snooping Implement the switchdev callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED to allow to enable/disable multicast snooping. ==================== Signed-off-by: -
Horatiu Vultur authored
When the multicast snooping is disabled, the mdb entries should be removed from the HW, but they still need to be kept in memory for when the mcast_snooping will be enabled again. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
The callback allows to enable/disable multicast snooping. When the snooping is enabled, all IGMP and MLD frames are redirected to the CPU, therefore make sure not to set the skb flag 'offload_fwd_mark'. The HW will not flood multicast ipv4/ipv6 data frames. When the snooping is disabled, the HW will flood IGMP, MLD and multicast ipv4/ipv6 frames according to the mcast_flood flag. Signed-off-by:
-
Horatiu Vultur authored
When enabling the multicast snooping, the forwarding of the IPV6 frames has it's own forwarding mask. Signed-off-by:
-
Paul Blakey authored
Currently tc skb extension is used to send miss info from tc to ovs datapath module, and driver to tc. For the tc to ovs miss it is currently always allocated even if it will not be used by ovs datapath (as it depends on a requested feature). Export the static key which is used by openvswitch module to guard this code path as well, so it will be skipped if ovs datapath doesn't need it. Enable this code path once ovs datapath needs it. Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Improve set-flags command and update self tests Patches 1-3 allow more flexibility in the combinations of features and flags allowed with the MPTCP_PM_CMD_SET_FLAGS netlink command, and add self test case coverage for the new functionality. Patches 4-6 and 9 refactor the mptcp_join.sh self tests to allow them to configure all of the test cases using either the pm_nl_ctl utility (part of the mptcp self tests) or the 'ip mptcp' command (from iproute2). The default remains to use pm_nl_ctl. Patches 7 and 8 update the pm_netlink.sh self tests to cover the use of endpoint ids to set endpoint flags (instead of just addresses). ==================== Link: https://lore.kernel.org/r/20220205000337.187292-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Geliang Tang authored
This patch added a command line option '-i' for mptcp_join.sh to use 'ip mptcp' commands instead of using 'pm_nl_ctl' commands to deal with PM netlink. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
This patch added the setting flags test cases, using both addr-based and id-based lookups for the setting address. The output looks like this: set flags (backup) [ OK ] (nobackup) [ OK ] (fullmesh) [ OK ] (nofullmesh) [ OK ] (backup,fullmesh) [ OK ] Signed-off-by: -
Geliang Tang authored
This patch added the id argument for setting the address flags in pm_nl_ctl. Usage: pm_nl_ctl set id 1 flags backup Signed-off-by: -
Geliang Tang authored
This patch implemented a new function named pm_nl_set_endpoint(), wrapped the PM netlink commands 'ip mptcp endpoint change flags' and 'pm_nl_ctl set flags' in it, and used a new argument 'ip_mptcp' to choose which one to use to set the flags of the PM endpoint. 'ip mptcp' used the ID number argument to find out the address to change flags, while 'pm_nl_ctl' used the address and port number arguments. So we need to parse the address ID from the PM dump output as well as the address and port number. Used this wrapper in do_transfer() instead of using the pm_nl_ctl command directly. Signed-off-by:
-
Geliang Tang authored
This patch implemented a new function named pm_nl_show_endpoints(), wrapped the PM netlink commands 'ip mptcp endpoint show' and 'pm_nl_ctl dump' in it, used a new argument 'ip_mptcp' to choose which one to use to show all the PM endpoints. Used this wrapper in do_transfer() instead of using the pm_nl_ctl commands directly. The original 'pos+=5' in the remoing tests only works for the output of 'pm_nl_ctl show': id 1 flags subflow 10.0.1.1 It doesn't work for the output of 'ip mptcp endpoint show': 10.0.1.1 id 1 subflow So implemented a more flexible approach to get the address ID from the PM dump output to fit for both commands. Signed-off-by:
-
Geliang Tang authored
This patch added four basic 'ip mptcp' wrappers: pm_nl_set_limits() pm_nl_add_endpoint() pm_nl_del_endpoint() pm_nl_flush_endpoint(). Wrapped the PM netlink commands 'ip mptcp' and 'pm_nl_ctl' in them, and used a new argument 'ip_mptcp' to choose which one to use for setting the PM limits, adding or deleting the PM endpoint. Used the wrappers in all the selftests in mptcp_join.sh instead of using the pm_nl_ctl commands directly. Signed-off-by:
-
Geliang Tang authored
This patch added the backup testcase using an address with a port number. The original backup tests only work for the output of 'pm_nl_ctl dump' without the port number. It chooses the last item in the dump to parse the address in it, and in this case, the address is showed at the end of the item. But it doesn't work for the dump with the port number, in this case, the port number is showed at the end of the item, not the address. So implemented a more flexible approach to get the address and the port number from the dump to fit for the port number case. Signed-off-by:
-
Geliang Tang authored
This patch added the port argument for setting the address flags in pm_nl_ctl. Usage: pm_nl_ctl set 10.0.2.1 flags backup port 10100 Signed-off-by: -
Geliang Tang authored
It's illegal to use both port and non-signal flags for adding address. But it's legal to use both of them for setting flags, which always uses non-signal flags, backup or fullmesh. This patch moves this non-signal flag with port check from mptcp_pm_parse_addr() to mptcp_nl_cmd_add_addr(). Do the check only when adding addresses, not setting flags or deleting addresses. Signed-off-by:
-
Jakub Kicinski authored
Justin Iurman says: ==================== Support for the IOAM insertion frequency The insertion frequency is represented as "k/n", meaning IOAM will be added to {k} packets over {n} packets, with 0 < k <= n and 1 <= {k,n} <= 1000000. Therefore, it provides the following percentages of insertion frequency: [0.0001% (min) ... 100% (max)]. Not only this solution allows an operator to apply dynamic frequencies based on the current traffic load, but it also provides some flexibility, i.e., by distinguishing similar cases (e.g., "1/2" and "2/4"). "1/2" = Y N Y N Y N Y N ... "2/4" = Y Y N N Y Y N N ... ==================== Link: https://lore.kernel.org/r/20220202142554.9691-1-justin.iurman@uliege.beSigned-off-by: -
Justin Iurman authored
Add support for the IOAM insertion frequency inside its lwtunnel output function. This patch introduces a new (atomic) counter for packets, based on which the algorithm will decide if IOAM should be added or not. Default frequency is "1/1" (i.e., applied to all packets) for backward compatibility. The iproute2 patch is ready and will be submitted as soon as this one is accepted. Previous iproute2 command: ip -6 ro ad fc00::1/128 encap ioam6 [ mode ... ] ... New iproute2 command: ip -6 ro ad fc00::1/128 encap ioam6 [ freq k/n ] [ mode ... ] ... Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Justin Iurman authored
Add the insertion frequency uapi for IOAM lwtunnels. Signed-off-by:
-
- 04 Feb, 2022 14 commits
-
-
Jakub Kicinski authored
Nothing in ipv6.h needs ndisc.h, drop it. Link: https://lore.kernel.org/r/20220203043457.2222388-1-kuba@kernel.orgAcked-by:
Jeremy Kerr <jk@codeconstruct.com.au> Acked-by:
Stefan Schmidt <stefan@datenfreihafen.org> Link: https://lore.kernel.org/r/20220203231240.2297588-1-kuba@kernel.orgReviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: improve RX buffer replenishing This series revises the algorithm used for replenishing receive buffers on RX endpoints. Currently there are two atomic variables that track how many receive buffers can be sent to the hardware. The new algorithm obviates the need for those, by just assuming we always want to provide the hardware with buffers until it can hold no more. The first patch eliminates an atomic variable that's not required. The next moves some code into the main replenish function's caller, making one of the called function's arguments unnecessary. The next six refactor things a bit more, adding a new helper function that allows us to eliminate an additional atomic variable. And the final two implement two more minor improvements. ==================== Signed-off-by: -
Alex Elder authored
Rather than tracking the number of receive buffer transactions that have been submitted without a doorbell, just track the total number of transactions that have been issued. Then ring the doorbell when that number modulo the replenish batch size is 0. The effect is roughly the same, but the new count is slightly more interesting, and this approach will someday allow the replenish batch size to be tuned at runtime. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Replenishing is now solely driven by whether transactions are available for a channel, and it doesn't really matter whether we replenish before or after we deliver received packets to the network stack. Replenishing before delivering the payload adds a little latency. Eliminate that by requesting a replenish after the payload is delivered. Signed-off-by:
-
Alex Elder authored
We no longer use the replenish_backlog atomic variable to decide when we've got work to do providing receive buffers to hardware. Basically, we try to keep the hardware as full as possible, all the time. We keep supplying buffers until the hardware has no more space for them. As a result, we can get rid of the replenish_backlog field and the atomic operations performed on it. Signed-off-by:
-
Alex Elder authored
Create a new function that returns true if all transactions for a channel are available for use. Use it in ipa_endpoint_replenish_enable() to see whether to start replenishing, and in ipa_endpoint_replenish() to determine whether it's necessary after a failure to schedule delayed work to ensure a future replenish attempt occurs. Signed-off-by:
-
Alex Elder authored
Rather than determining when to stop replenishing using the replenish backlog, just stop when we have exhausted all available transactions. Signed-off-by:
-
Alex Elder authored
When replenishing, have ipa_endpoint_replenish() allocate a transaction, and pass that to ipa_endpoint_replenish_one() to fill. Then, if that produces no error, commit the transaction within the replenish loop as well. In this way we can distinguish between transaction failures and buffer allocation/mapping failures. Failure to allocate a transaction simply means the hardware already has as many receive buffers as it can hold. In that case we can break out of the replenish loop because there's nothing more to do. If we fail to allocate or map pages for the receive buffer, just try again later. Signed-off-by:
-
Alex Elder authored
Decide whether the doorbell should be signaled when committing a replenish transaction in the main replenish loop, rather than in ipa_endpoint_replenish_one(). This is a step to facilitate the next patch. Signed-off-by:
-
Alex Elder authored
Three spots call ipa_endpoint_replenish(), and just one of those requests that the backlog be incremented after completing the replenish operation. Instead, have the caller increment the backlog, and get rid of the add_one argument to ipa_endpoint_replenish(). Signed-off-by:
-
Alex Elder authored
A transaction failure only occurs if no more transactions are available for an endpoint. It's a very cheap test. When replenishing an RX endpoint buffer, there's no point in allocating pages if transactions are exhausted. So don't bother doing so unless the transaction allocation succeeds. Signed-off-by:
-
Alex Elder authored
The replenish_saved field keeps track of the number of times a new buffer is added to the backlog when replenishing is disabled. We don't really use it though, so there's no need for us to track it separately. Whether replenishing is enabled or not, we can simply increment the backlog. Get rid of replenish_saved, and initialize and increment the backlog where it would have otherwise been used. Signed-off-by:
-
Jakub Kicinski authored
TLS recvmsg() passes user pages as destination for decrypt. The decrypt operation is repeated record by record, each record being 16kB, max. TLS allocates an sg_table and uses iov_iter_get_pages() to populate it with enough pages to fit the decrypted record. Even though we decrypt a single message at a time we size the sg_table based on the entire length of the iovec. This leads to unnecessarily large allocations, risking triggering OOM conditions. Use iov_iter_truncate() / iov_iter_reexpand() to construct a "capped" version of iov_iter_npages(). Alternatively we could parametrize iov_iter_npages() to take the size as arg instead of using i->count, or do something else.. Signed-off-by:
-
Russell King (Oracle) authored
Populate the supported interfaces and MAC capabilities for the Realtek rtl8365 DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. Signed-off-by:
-
