- 22 Sep, 2016 13 commits
-
-
Christophe Leroy authored
CLR_TOP32() is defined as blank. Last useful instance of CLR_TOP32() was removed by commit 40ef8cbc ("powerpc: Get 64-bit configs to compile with ARCH=powerpc") in 2005. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
On some CPUs like the 8xx, _PAGE_RW hence _PAGE_WRITE is defined as 0 and _PAGE_RO has to be set when a page is not writable _PAGE_RO is defined by default in pte-common.h, however BOOK3S/64 doesn't include that file so _PAGE_RO has to be defined explicitly in book3s/64/pgtable.h Fixes: a7b9f671 ("powerpc32: adds handling of _PAGE_RO") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Russell Currey authored
In eeh_handle_special_event(), eeh_pe_bus_get() is called before calling eeh_report_failure() on every device under a PE. If a PE was missing a bus for some reason, the error would occur before reporting failure, even though eeh_report_failure() doesn't require a bus. Fix this by moving the bus retrieval and error check after the eeh_report_failure() calls. Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Russell Currey authored
When the PE used in pnv_eeh_reset() is that of a VF, pnv_eeh_reset_vf_pe() is used. Unlike the other reset functions called in pnv_eeh_reset(), the VF reset doesn't require a bus, and if a bus was missing the function would error out before resetting the VF PE. To avoid this, reorder the VF reset function to occur before finding and checking the bus. Signed-off-by:
-
Russell Currey authored
eeh_pe_bus_get() can return NULL if a PCI bus isn't found for a given PE. Some callers don't check this, and can cause a null pointer dereference under certain circumstances. Fix this by checking NULL everywhere eeh_pe_bus_get() is called. Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Nicholas Piggin authored
When we originally added the ability to split the exception vectors from the kernel (commit 1f6a93e4 ("powerpc: Make it possible to move the interrupt handlers away from the kernel" 2008-09-15)), the LOAD_HANDLER() macro used an addi instruction to compute the offset of the common handler from the kernel base address. Using addi meant the handler had to be within 32K of the kernel base address, due to the addi instruction taking a signed immediate value. That necessitated creating a trampoline for the system call handler, because system_call_common (in entry64.S) is not linked within 32K of the kernel base address. Later in commit 61e2390e ("powerpc: Make load_hander handle upto 64k offset" 2012-11-15) we changed LOAD_HANDLER to take a 64K offset, by changing it to use ori. Although system_call_common is not in head_64.S or exceptions-64s.S, it is included in head-y, which causes it to be linked early in the kernel text, so in practice it ends up below 64K. Additionally if it can't be placed below 64K the linker will fail to build with a "relocation truncated to fit" error. So remove the trampoline. Newer toolchains are able to work out that the ori in LOAD_HANDLER only takes a 16 bit offset, and so they generate a 16 bit relocation. Older toolchains (binutils 2.22 at least) are not so smart, so we have to add the @l annotation to tell the assembler to generate a 16 bit relocation. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The 0xf80 hv_facility_unavailable trampoline branches to the 0xf60 handler. This works because they both do the same thing, but it should be fixed. Signed-off-by:
-
Russell Currey authored
On EEH events the kernel will print a dump of relevant registers. If EEH is unavailable (i.e. CONFIG_EEH is disabled, a new platform doesn't have EEH support, etc) this information isn't readily available. Add a new debugfs handler to trigger a PHB register dump, so that this information can be made available on demand. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
The only difference is now the TCE table check which doesn't need to be ifdef'ed out, it will basically do nothing on BookE (it is only useful for ancient IBM machines). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Currently we turn the MMU off after copying the image, and we make sure there is no overlap between the hash table and the target pages in that case. That doesn't work for Radix however. In that case, the page tables are scattered and we can't really enforce that the target of the image isn't overlapping one of them. So instead, let's turn the MMU off before copying the image in radix mode. Thankfully, in radix mode, even under a hypervisor, we know we don't have the same kind of RMA limitations that hash mode has. While at it, also turn the MMU off early when using hash in non-LPAR mode, that way we can get rid of the collision check completely. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
Just using the hash ops won't work anymore since radix will have NULL in there. Instead create an mmu_cleanup_all() function which will do the right thing based on the MMU mode. For Radix, for now I clear UPRT and the PTCR, effectively switching back to Radix with no partition table setup. Currently set it to NULL on BookE thought it might be a good idea to wipe the TLB there (Scott ?) Signed-off-by:
-
Benjamin Herrenschmidt authored
With Radix, it can be NULL even on !BOOKE these days so replace the ifdef with a NULL check which is cleaner anyway. Signed-off-by:
-
- 20 Sep, 2016 10 commits
-
-
Michael Ellerman authored
NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff14 ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by:
-
Michael Neuling authored
Fred has taken over the cxl maintenance I was doing. This updates the MAINTAINERS file to reflect this. It also removes a duplicate entry in the files covered and adds an entry for the CXL PCI code in arch/powerpc. Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Donnellan authored
If we fail to allocate work, we don't end up using hp_errlog_copy. Free it in the error path. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Pan Xinhui authored
When we merge two contiguous partitions whose signatures are marked NVRAM_SIG_FREE, We need update prev's length and checksum, then write it to nvram, not cur's. So lets fix this mistake now. Also use memset instead of strncpy to set the partition's name. It's more readable if we want to fill up with duplicate chars . Fixes: fa2b4e54 ("powerpc/nvram: Improve partition removal") Signed-off-by:
Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by:
-
Pan Xinhui authored
If kmemdup fails, We need kfree *buff* first then return -ENOMEM. Otherwise there is a memory leak. Signed-off-by:
-
Nicholas Piggin authored
mtmsrd with L=1 only affects MSR_EE and MSR_RI bits, and we always know what state those bits are, so the kernel MSR does not need to be loaded when modifying them. mtmsrd is often in the critical execution path, so avoiding dependency on even L1 load is noticable. On a POWER8 this saves about 3 cycles from the syscall path, and possibly a few from other exception returns (not measured). Signed-off-by:
-
Nicholas Piggin authored
The mflr r10 instruction was left over from when the code used LR to branch to system_call_entry from the exception handler. That was changed by commit 6a404806 ("powerpc: Avoid link stack corruption in MMU on syscall entry path") to use the count register. The value is never used now, so mflr can be removed, and r10 can be used for storage rather than spilling to the SPR scratch register. The scratch register spill causes a long pipeline stall due to the SPR read after write. This change brings getppid syscall cost from 406 to 376 cycles on POWER8. getppid for non-relocatable case is 371 cycles. Signed-off-by:
-
Aneesh Kumar K.V authored
For hugetlb to work with 4K page size, we need MAX_ORDER to be 13 or more. When switching from a 64K page size to 4K linux page size using make oldconfig, we end up with a CONFIG_FORCE_MAX_ZONEORDER value of 9. This results in a 16M hugepage beiing considered as a gigantic huge page which in turn results in failure to setup hugepages if gigantic hugepage support is not enabled. This also results in kernel crash with 4K radix configuration. We hit the below BUG_ON on radix: kernel BUG at mm/huge_memory.c:364! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=2048 NUMA PowerNV CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1-00006-gbae9cc6 #1 task: c0000000f1af8000 task.stack: c0000000f1aec000 NIP: c000000000c5fa0c LR: c000000000c5f9d8 CTR: c000000000c5f9a4 REGS: c0000000f1aef920 TRAP: 0700 Not tainted (4.8.0-rc1-00006-gbae9cc6) MSR: 9000000102029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE,TM[E]> CR: 24000844 XER: 00000000 CFAR: c000000000c5f9e0 SOFTE: 1 .... NIP [c000000000c5fa0c] hugepage_init+0x68/0x238 LR [c000000000c5f9d8] hugepage_init+0x34/0x238 Fixes: a7ee5395 ("powerpc/Kconfig: Update config option based on page size") Cc: stable@vger.kernel.org # v4.7+ Reported-by:
Santhosh <santhog4@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Add some documentation for the 64-bit syscall ABI, which doesn't seem to be documented elsewhere. This attempts to document existing practice. The only small discrepancy is glibc clobbers not quite matching the kernel (e.g., xer, some vsyscalls trash cr1 whereas glibc only clobbers cr0). These will be resolved after this document is merged. Signed-off-by:
-
Nicholas Piggin authored
The HMI (Hypervisor Maintenance Interrupt) is defined by the architecture to be higher priority than other maskable interrupts, so replay it first, as a best-effort to replay according to hardware priorities. Signed-off-by:
-
- 19 Sep, 2016 4 commits
-
-
Michael Ellerman authored
In our linker script we open code the list of text sections, because we need to include the __ftr_alt sections, which are arch-specific. This means we can't use TEXT_TEXT as defined in vmlinux.lds.h, and so we don't have the MEM_KEEP() logic for memory hotplug sections. If we build the kernel with the gold linker, and with CONFIG_MEMORY_HOTPLUG=y, we see that functions marked __meminit can end up outside of the _stext/_etext range, and also outside of _sinittext/_einittext, eg: c000000000000000 T _stext c0000000009e0000 A _etext c0000000009e3f18 T hash__vmemmap_create_mapping c000000000ca0000 T _sinittext c000000000d00844 T _einittext This causes them to not be recognised as text by is_kernel_text(), and prevents them being patched by jump_label (and presumably ftrace/kprobes etc.). Fix it by adding MEM_KEEP() directives, mirroring what TEXT_TEXT does. This isn't a problem when CONFIG_MEMORY_HOTPLUG=n, because we use the standard INIT_TEXT_SECTION() and EXIT_TEXT macros from vmlinux.lds.h. Signed-off-by:Anton Blanchard <anton@samba.org> Signed-off-by:
-
Michael Ellerman authored
Currently the _GLOBAL() macro unilaterally sets the assembler section to ".text" at the start of the macro. This is rude as the caller may be using a different section. So let the caller decide which section to emit the code into. On big endian we do need to switch to the ".opd" section to emit the OPD, but do that with pushsection/popsection, thereby leaving the original section intact. I verified that the order of all entries in System.map is unchanged after this patch. The actual addresses shift around slightly so you can't just diff the System.map. Signed-off-by:
-
Nicholas Piggin authored
Rather than forcing the whole function into the ".kprobes.text" section, just add the symbol's address to the kprobe blacklist. This also lets us drop the three versions of the_KPROBE macro, in exchange for just one version of _ASM_NOKPROBE_SYMBOL - which is a good cleanup. Signed-off-by:
-
Nicholas Piggin authored
Currently we mark the C implementations of some exception handlers as __kprobes. This has the effect of putting them in the ".kprobes.text" section, which separates them from the rest of the text. Instead we can use the blacklist macros to add the symbols to a blacklist which kprobes will check. This allows the linker to move exception handler functions close to callers and avoids trampolines in larger kernels. Signed-off-by:
-
- 13 Sep, 2016 13 commits
-
-
Simon Guo authored
Normally, when MSR[VSX/VR/SPE] bits == 1, the used_vsr/used_vr/used_spe bit have already been set. However when loading a signal frame from user space we need to explicitly set used_vsr/used_vr/used_spe to make them consistent with the MSR bits from the signal frame. For example, CRIU application, who utilizes sigreturn to restore checkpointed process, will lead to the case where MSR[VSX] bit is active in signal frame, but used_vsr bit is not set in the kernel. (the same applies to VR/SPE). This patch fixes this by always setting used_* bit when MSR related bits are active in signal frame and we are doing sigreturn. Based on a proposal by Benh. Signed-off-by:
Simon Guo <wei.guo.simon@gmail.com> [mpe: Massage change log] Signed-off-by:
-
Simon Guo authored
The ckpt_regs usage in gpr32_set_common/gpr32_get_common() will lead to following cppcheck error at ifndef CONFIG_PPC_TRANSACTIONAL_MEM case: [arch/powerpc/kernel/ptrace.c:2062]: (error) Uninitialized variable: ckpt_regs [arch/powerpc/kernel/ptrace.c:2130]: (error) Uninitialized variable: ckpt_regs The problem is due to gpr32_set_common() used ckpt_regs variable which only makes sense at #ifdef CONFIG_PPC_TRANSACTIONAL_MEM. This patch fix this issue by passing in "regs" parameter instead. Reported-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Frederic Barrat authored
When set_sl_ops() is called, the adapter data structure is not fully initialized yet. Therefore the device name is not showing up in the trace. Fix is simply to get the device name from the pci_dev structure. Fixes: 6d382616 ("cxl: Abstract the differences between the PSL and XSL") Signed-off-by:
-
Colin Ian King authored
The message is missing a \n, add it. Switch to pr_warn(), it's shorter and less ugly. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Power9 DD1 requires to update the hid0 register when switching from hash to radix. Signed-off-by:
-
Aneesh Kumar K.V authored
POWER9 DD1 requires pte to be marked invalid (V=0) before updating it with the new value. This makes this distinction for the different revisions. Signed-off-by:
-
Aneesh Kumar K.V authored
POWER9 DD1 uses RTS - 28 for the RTS value but other revisions use RTS - 31. This makes this distinction for the different revisions Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Darren Stevens authored
The of_node for the SB600 (io-bridge) has its device_type set to 'io-bridge' Set it to 'isa' so that it can be found by isa_bridge_find_early() instead of using patches in the kernel. Signed-off-by:
Darren Stevens <darren@stevens-zone.net> Signed-off-by:
-
Darren Stevens authored
The device tree on the Nemo passes all of the i8259 interrupts with numbers between 212 and 222, and points their interrupt-parent property to the pasemi-opic, requiring custom patches to the kernel. Fix the values so that they can be controlled by the generic ppc i8259 code. Signed-off-by:
-
Darren Stevens authored
Add config option for the Nemo motherboard used in the Amigaone X1000. This is a custom PASemi board with an AMD SB600 southbridge, and needs some patches to it device tree. This option will be used to build these into the kernel Signed-off-by:
-
PrasannaKumar Muralidharan authored
Checkpatch.pl warns about usage of asm/io.h. Use linux/io.h instead. Signed-off-by:
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message and remove extraneous trailing whitespace at end of the message. Signed-off-by:
-
