- 10 Oct, 2018 40 commits
-
-
Joe Thornber authored
[ Upstream commit 3ab91828 ] Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jacek Tomaka authored
[ Upstream commit 16160c19 ] Problem: perf did not show branch predicted/mispredicted bit in brstack. Output of perf -F brstack for profile collected Before: 0x4fdbcd/0x4fdc03/-/-/-/0 0x45f4c1/0x4fdba0/-/-/-/0 0x45f544/0x45f4bb/-/-/-/0 0x45f555/0x45f53c/-/-/-/0 0x7f66901cc24b/0x45f555/-/-/-/0 0x7f66901cc22e/0x7f66901cc23d/-/-/-/0 0x7f66901cc1ff/0x7f66901cc20f/-/-/-/0 0x7f66901cc1e8/0x7f66901cc1fc/-/-/-/0 After: 0x4fdbcd/0x4fdc03/P/-/-/0 0x45f4c1/0x4fdba0/P/-/-/0 0x45f544/0x45f4bb/P/-/-/0 0x45f555/0x45f53c/P/-/-/0 0x7f66901cc24b/0x45f555/P/-/-/0 0x7f66901cc22e/0x7f66901cc23d/P/-/-/0 0x7f66901cc1ff/0x7f66901cc20f/P/-/-/0 0x7f66901cc1e8/0x7f66901cc1fc/P/-/-/0 Cause: As mentioned in Software Development Manual vol 3, 17.4.8.1, IA32_PERF_CAPABILITIES[5:0] indicates the format of the address that is stored in the LBR stack. Knights Landing reports 1 (LBR_FORMAT_LIP) as its format. Despite that, registers containing FROM address of the branch, do have MISPREDICT bit but because of the format indicated in IA32_PERF_CAPABILITIES[5:0], LBR did not read MISPREDICT bit. Solution: Teach LBR about above Knights Landing quirk and make it read MISPREDICT bit. Signed-off-by:
Jacek Tomaka <jacek.tomaka@poczta.fm> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180802013830.10600-1-jacekt@dugeo.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 28abf4e9 ] Add READ_ONCE calls where necessary (for example when iterating over a memory field that gets updated by the hardware). Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit ef5b0771 ] The buffer length field in the ena rx descriptor is 16 bit, and the current driver passes a full page in each ena rx descriptor. When PAGE_SIZE equals 64kB or more, the buffer length field becomes zero. To solve this issue, limit the ena Rx descriptor to use 16kB even when allocating 64kB kernel pages. This change would not impact ena device functionality, as 16kB is still larger than maximum MTU. Signed-off-by:
-
Stephen Rothwell authored
[ Upstream commit bcfb84a9 ] A powerpc build of cifs with gcc v8.2.0 produces this warning: fs/cifs/cifssmb.c: In function ‘CIFSSMBNegotiate’: fs/cifs/cifssmb.c:605:3: warning: ‘strncpy’ writing 16 bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] strncpy(pSMB->DialectsArray+count, protocols[i].name, 16); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Since we are already doing a strlen() on the source, change the strncpy to a memcpy(). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Heinz Mauelshagen authored
[ Upstream commit c44a5ee8 ] Update superblock when particular devices are requested via rebuild (e.g. lvconvert --replace ...) to avoid spurious failure with the "New device injected into existing raid set without 'delta_disks' or 'rebuild' parameter specified" error message. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit e04cfdc9 ] If a HPD pulse signalling the need to retrain the link occurs between the KMS driver releasing the output and the supervisor interrupt that finishes the teardown, it was possible get a NULL-ptr deref. Avoid this by marking the link as inactive earlier. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 0a6986c6 ] This Falcon application doesn't appear to be present on some newer systems, so let's not fail init if we can't find it. TBD: is there a way to determine whether it *should* be there? Signed-off-by:
-
Daniel Jurgens authored
[ Upstream commit df7ddb23 ] The PCI BDF is not unique. PCI domain must also be considered when searching for the next physical device during lag setup. Example below: mlx5_core 0000:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0000:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0001:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0001:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Aviv Heller <avivh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit 8407879c ] Currently we always repost the recv buffer before we send a response capsule back to the host. Since ordering is not guaranteed for send and recv completions, it is posible that we will receive a new request from the host before we got a send completion for the response capsule. Today, we pre-allocate 2x rsps the length of the queue, but in reality, under heavy load there is nothing that is really preventing the gap to expand until we exhaust all our rsps. To fix this, if we don't have any pre-allocated rsps left, we dynamically allocate a rsp and make sure to free it when we are done. If under memory pressure we fail to allocate a rsp, we silently drop the command and wait for the host to retry. Reported-by:
Steve Wise <swise@opengridcomputing.com> Tested-by:
Sagi Grimberg <sagi@grimberg.me> [hch: dropped a superflous assignment] Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 14427b86 ] snprintf() always returns the full length of the string it could have printed, even if it was truncated because the buffer was too small. So in case the counter value is truncated, we will over-read from in_buffer and over-write to the caller's buffer. I don't think it's actually possible for this to happen, but in case truncation occurs, WARN and return -EIO. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit ade573eb ] Commit b0f847e1 ("HID: hid-sensor-hub: Force logical minimum to 1 for power and report state") not only replaced the descriptor fixup done for devices with the HID_SENSOR_HUB_ENUM_QUIRK with a generic fix, but also accidentally removed the unrelated descriptor fixup for the Lenovo ThinkPad Helix 2 sensor hub. This commit restores this fixup. Restoring this fixup not only fixes the Lenovo ThinkPad Helix 2's sensors, but also the Lenovo ThinkPad 8's sensors. Fixes: b0f847e1 ("HID: hid-sensor-hub: Force logical minimum ...") Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Fernando D S Lima <fernandodsl@gmail.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 0d23ba60 ] The current code grabs the private_data of whatever file descriptor userspace has supplied and implicitly casts it to a `struct ucma_file *`, potentially causing a type confusion. This is probably fine in practice because the pointer is only used for comparisons, it is never actually dereferenced; and even in the comparisons, it is unlikely that a file from another filesystem would have a ->private_data pointer that happens to also be valid in this context. But ->private_data is not always guaranteed to be a valid pointer to an object owned by the file's filesystem; for example, some filesystems just cram numbers in there. Check the type of the supplied file descriptor to be safe, analogous to how other places in the kernel do it. Fixes: 88314e4d ("RDMA/cma: add support for rdma_migrate_id()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Matt Ranostay authored
[ Upstream commit 65099ea8 ] This reverts commit 535fba29. Seems the submitter (er me, hang head in shame) didn't look at the datasheet enough to see that the registers are quite different. This needs to be reverted because a) would never work b) to open it be added to a Maxim RTDs (Resistance Temperature Detectors) under development by author Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 7acfda53 ] When element of verdict map is deleted, the delete routine should release chain. however, flush element of verdict map routine doesn't release chain. test commands: %nft add table ip filter %nft add chain ip filter c1 %nft add map ip filter map1 { type ipv4_addr : verdict \; } %nft add element ip filter map1 { 1 : jump c1 } %nft flush map ip filter map1 %nft flush ruleset splat looks like: [ 4895.170899] kernel BUG at net/netfilter/nf_tables_api.c:1415! [ 4895.178114] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 4895.178880] CPU: 0 PID: 1670 Comm: nft Not tainted 4.18.0+ #55 [ 4895.178880] RIP: 0010:nf_tables_chain_destroy.isra.28+0x39/0x220 [nf_tables] [ 4895.178880] Code: fc ff df 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 09 3c 03 7f 05 e8 3e 4c 25 e1 8b 43 50 85 c0 74 02 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 [ 4895.228342] RSP: 0018:ffff88010b98f4c0 EFLAGS: 00010202 [ 4895.234841] RAX: 0000000000000001 RBX: ffff8801131c6968 RCX: ffff8801146585b0 [ 4895.234841] RDX: 1ffff10022638d37 RSI: ffff8801191a9348 RDI: ffff8801131c69b8 [ 4895.234841] RBP: ffff8801146585a8 R08: 1ffff1002323526a R09: 0000000000000000 [ 4895.234841] R10: 0000000000000000 R11: 0000000000000000 R12: dead000000000200 [ 4895.234841] R13: dead000000000100 R14: ffffffffa3638af8 R15: dffffc0000000000 [ 4895.234841] FS: 00007f6d188e6700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 4895.234841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4895.234841] CR2: 00007ffe72b8df88 CR3: 000000010e2d4000 CR4: 00000000001006f0 [ 4895.234841] Call Trace: [ 4895.234841] nf_tables_commit+0x2704/0x2c70 [nf_tables] [ 4895.234841] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.234841] ? nf_tables_setelem_notify.constprop.48+0x1a0/0x1a0 [nf_tables] [ 4895.323824] ? __lock_is_held+0x9d/0x130 [ 4895.323824] ? kasan_unpoison_shadow+0x30/0x40 [ 4895.333299] ? kasan_kmalloc+0xa9/0xc0 [ 4895.333299] ? kmem_cache_alloc_trace+0x2c0/0x310 [ 4895.333299] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.333299] nfnetlink_rcv_batch+0xdb9/0x11b0 [nfnetlink] [ 4895.333299] ? debug_show_all_locks+0x290/0x290 [ 4895.333299] ? nfnetlink_net_init+0x150/0x150 [nfnetlink] [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? find_held_lock+0x39/0x1b0 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? memset+0x1f/0x40 [ 4895.333299] ? nla_parse+0x33/0x260 [ 4895.333299] ? ns_capable_common+0x6e/0x110 [ 4895.333299] nfnetlink_rcv+0x2c0/0x310 [nfnetlink] [ ... ] Fixes: 59105446 ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit fa694160 ] This makes sure that the SyS symbols are ignored for any powerpc system, not just the big endian ones. Reported-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Chris Phlipot authored
[ Upstream commit a72f6426 ] In the write to the output_fd in the error condition of record_saved_cmdline(), we are writing 8 bytes from a memory location on the stack that contains a primitive that is only 4 bytes in size. Change the primitive to 8 bytes in size to match the size of the write in order to avoid reading unknown memory from the stack. Signed-off-by:
Chris Phlipot <cphlipot0@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180829061954.18871-1-cphlipot0@gmail.comSigned-off-by:
-
Hisao Tanabe authored
[ Upstream commit fd8d2702 ] If evsel is NULL, we should return NULL to avoid a NULL pointer dereference a bit later in the code. Signed-off-by:
Hisao Tanabe <xtanabe@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 03e0a7df ("perf tools: Introduce bpf-output event") LPU-Reference: 20180824154556.23428-1-xtanabe@gmail.com Link: https://lkml.kernel.org/n/tip-e5plzjhx6595a5yjaf22jss3@git.kernel.orgSigned-off-by:
-
Nilesh Javali authored
[ Upstream commit c77a2fa3 ] The QED driver commit, 1ac4329a ("qed: Add configuration information to register dump and debug data"), removes the CRC length validation causing nvm_get_image failure while loading qedi driver: [qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes where only 00006004 are available [qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12 Hence add and adjust the CRC size to iSCSI NVM image to read boot info at qedi load time. Signed-off-by:
Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Vincent Pelletier authored
[ Upstream commit 7915919b ] Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by:
Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Harry Mallon authored
[ Upstream commit 43822c98 ] Signed-off-by:
Harry Mallon <hjmallon@gmail.com> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit c37bd528 ] There is no deallocation of fotg210->ep[i] elements, allocated at fotg210_udc_probe. The patch adds deallocation of fotg210->ep array elements and simplifies error path of fotg210_udc_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Sean O'Brien authored
[ Upstream commit ee345492 ] USB device Vendor 05ac (Apple) Device 026c (Magic Keyboard with Numeric Keypad) Bluetooth devices Vendor 004c (Apple) Device 0267 (Magic Keyboard) Device 026c (Magic Keyboard with Numeric Keypad) Support already exists for the Magic Keyboard over USB connection. Add support for the Magic Keyboard over Bluetooth connection, and for the Magic Keyboard with Numeric Keypad over Bluetooth and USB connection. Signed-off-by:
Sean O'Brien <seobrien@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Martin Willi authored
[ Upstream commit c1dc2912 ] The cluster match requires conntrack for matching packets. If the netns does not have conntrack hooks registered, the match does not work at all. Implicitly load the conntrack hook for the family, exactly as many other extensions do. This ensures that the match works even if the hooks have not been registered by other means. Signed-off-by:
Martin Willi <martin@strongswan.org> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Jann Horn authored
commit b799207e upstream. When I wrote commit 468f6eaf ("bpf: fix 32-bit ALU op verification"), I assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it is sufficient to just truncate the output to 32 bits; and so I just moved the register size coercion that used to be at the start of the function to the end of the function. That assumption is true for almost every op, but not for 32-bit right shifts, because those can propagate information towards the least significant bit. Fix it by always truncating inputs for 32-bit ops to 32 bits. Also get rid of the coerce_reg_to_size() after the ALU op, since that has no effect. Fixes: 468f6eaf ("bpf: fix 32-bit ALU op verification") Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Black authored
commit d41aa525 upstream. Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by:
Kenneth Penza <kpenza@gmail.com> Signed-off-by:
Daniel Black <daniel@linux.ibm.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit 7ab660f8 ] debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit 90450656 ] Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit c6e57b38 ] When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit 6c18b27d ] If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 0007e943 ] When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit f3ffb6c3 ] We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8442938c ] The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4 ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 66eb02d8 ] Initialize 'n' to 2 in order to take into account also the first packet in the estimation of max_subframe limit for a given A-MSDU since frag_tail pointer is NULL when ieee80211_amsdu_aggregate routine analyzes the second frame. Fixes: 6e0456b5 ("mac80211: add A-MSDU tx support") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Jon Kuhn authored
[ Upstream commit c15e3f19 ] When a Mac client saves an item containing a backslash to a file server the backslash is represented in the CIFS/SMB protocol as as U+F026. Before this change, listing a directory containing an item with a backslash in its name will return that item with the backslash represented with a true backslash character (U+005C) because convert_sfm_character mapped U+F026 to U+005C when interpretting the CIFS/SMB protocol response. However, attempting to open or stat the path using a true backslash will result in an error because convert_to_sfm_char does not map U+005C back to U+F026 causing the CIFS/SMB request to be made with the backslash represented as U+005C. This change simply prevents the U+F026 to U+005C conversion from happenning. This is analogous to how the code does not do any translation of UNI_SLASH (U+F000). Signed-off-by:
Jon Kuhn <jkuhn@barracuda.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 16fe10cf ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 4c85609b ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 38f5d8d8 ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by:
-
Xiao Ni authored
[ Upstream commit 1d0ffd26 ] In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by:
Xiao Ni <xni@redhat.com> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit e254de6b ] We don't support reshape yet if an array supports log device. Previously we determine the fact by checking ->log. However, ->log could be NULL after a log device is removed, but the array is still marked to support log device. Don't allow reshape in this case too. User can disable log device support by setting 'consistency_policy' to 'resync' then do reshape. Reported-by:
-
