- 15 Dec, 2016 40 commits
-
-
Matthew Wilcox authored
This fixes several interlinked problems with the iterators in the presence of multiorder entries. 1. radix_tree_iter_next() would only advance by one slot, which would result in the iterators returning the same entry more than once if there were sibling entries. 2. radix_tree_next_slot() could return an internal pointer instead of a user pointer if a tagged multiorder entry was immediately followed by an entry of lower order. 3. radix_tree_next_slot() expanded to a lot more code than it used to when multiorder support was compiled in. And I wasn't comfortable with entry_to_node() being in a header file. Fixing radix_tree_iter_next() for the presence of sibling entries necessarily involves examining the contents of the radix tree, so we now need to pass 'slot' to radix_tree_iter_next(), and we need to change the calling convention so it is called *before* dropping the lock which protects the tree. Also rename it to radix_tree_iter_resume(), as some people thought it was necessary to call radix_tree_iter_next() each time around the loop. radix_tree_next_slot() becomes closer to how it looked before multiorder support was introduced. It only checks to see if the next entry in the chunk is a sibling entry or a pointer to a node; this should be rare enough that handling this case out of line is not a performance impact (and such impact is amortised by the fact that the entry we just processed was a multiorder entry). Also, radix_tree_next_slot() used to force a new chunk lookup for untagged entries, which is more expensive than the out of line sibling entry skipping. Link: http://lkml.kernel.org/r/1480369871-5271-55-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Tested-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox authored
We drop the lock which protects the radix tree, so we must call radix_tree_iter_next() in order to avoid a modification to the tree invalidating the iterator state. Link: http://lkml.kernel.org/r/1480369871-5271-54-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Print the indices of the entries as unsigned (instead of signed) integers and print the parent node of each entry to help navigate around larger trees where the layout is not quite so obvious. Print the indices covered by a node. Rearrange the order of fields printed so the indices and parents line up for each type of entry. Link: http://lkml.kernel.org/r/1480369871-5271-53-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
Matthew Wilcox <willy@infradead.org> Tested-by:
-
Matthew Wilcox authored
Since this function is specialised to the radix tree, pass in the node and tag to calculate the address of the bitmap in radix_tree_find_next_bit() instead of the caller. Likewise, there is no need to pass in the size of the bitmap. Link: http://lkml.kernel.org/r/1480369871-5271-52-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Similar to node_tag_clear(), factor node_tag_set() out of radix_tree_range_tag_if_tagged(). Link: http://lkml.kernel.org/r/1480369871-5271-51-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
Matthew Wilcox <willy@linux.intel.com> Tested-by:
-
Matthew Wilcox authored
I want to be able to reference node->parent after freeing node. Currently node->parent is in a union with rcu_head, so it is overwritten when the node is put on the RCU list. We know that private_list is not referenced after the node is freed, so it is safe for these two members to share space. Link: http://lkml.kernel.org/r/1480369871-5271-50-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Remove the old find_next_bit code in favour of linking in the find_bit code from tools/lib. Link: http://lkml.kernel.org/r/1480369871-5271-48-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
I need the following functions for the radix tree: bitmap_fill bitmap_empty bitmap_full Copy the implementations from include/linux/bitmap.h Signed-off-by:
-
Matthew Wilcox authored
This probably doubles the size of each item allocated by the test suite but it lets us check a few more things, and may be needed for upcoming API changes that require the caller pass in the order of the entry. Link: http://lkml.kernel.org/r/1480369871-5271-46-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
item_kill_tree() assumes that everything in the tree is a pointer to a struct item, which is annoying when testing the behaviour of exceptional entries. Fix it to delete exceptional entries on the assumption they don't need to be freed. Link: http://lkml.kernel.org/r/1480369871-5271-45-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Calling rcu_barrier() allows all of the rcu-freed memory to be actually returned to the pool, and allows nr_allocated to return to 0. As well as allowing diffs between runs to be more useful, it also lets us pinpoint leaks more effectively. Link: http://lkml.kernel.org/r/1480369871-5271-44-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Konstantin Khlebnikov authored
This adds simple benchmark for iterator similar to one I've used for commit 78c1d784 ("radix-tree: introduce bit-optimized iterator") Building with make BENCHMARK=1 set radix tree order to 6, this allows to get performance comparable to in kernel performance. Link: http://lkml.kernel.org/r/1480369871-5271-43-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
-
Matthew Wilcox authored
Each thread needs to register itself with RCU, otherwise the reading thread's read lock has no effect and the freeing thread will free the memory in the tree without waiting for the read lock to be dropped. Link: http://lkml.kernel.org/r/1480369871-5271-42-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Instead of reseeding the random number generator every time around the loop in big_gang_check(), seed it at the beginning of execution. Use rand_r() and an independent base seed for each thread in iteration_test() so they don't stomp all over each others state. Since this particular test depends on the kernel scheduler, the iteration test can't be reproduced based purely on the random seed, but at least it won't pollute the other tests. Print the seed, and allow the seed to be specified so that a run which hits a problem can be reproduced. Link: http://lkml.kernel.org/r/1480369871-5271-41-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
It can be a source of mild concern when the test suite shows that we're leaking nodes. While poring over the source code looking for leaks can lead to some fascinating bugs being discovered, sometimes the leak is simply that these nodes were preallocated and are sitting on the per-CPU list. Free them by calling the CPU dead callback. Link: http://lkml.kernel.org/r/1480369871-5271-40-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Rather than simply NOP out preempt_enable() and preempt_disable(), keep track of preempt_count and display it regularly in case either the test suite or the code under test is forgetting to balance the enables & disables. Only found a test-case that was forgetting to re-enable preemption, but it's a possibility worth checking. Link: http://lkml.kernel.org/r/1480369871-5271-39-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
In order to test the preload code, it is necessary to fail GFP_ATOMIC allocations, which requires defining GFP_KERNEL and GFP_ATOMIC properly. Remove the obsolete __GFP_WAIT and copy the definitions of the __GFP flags which are used from the kernel include files. We also need the real definition of gfpflags_allow_blocking() to persuade the radix tree to actually use its preallocated nodes. Link: http://lkml.kernel.org/r/1480369871-5271-38-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Matthew Wilcox authored
Patch series "Radix tree patches for 4.10", v3. Mostly these are improvements; the only bug fixes in here relate to multiorder entries (which are unused in the 4.9 tree). This patch (of 32): The radix tree uses its own buggy WARN_ON_ONCE. Replace it with the definition from asm-generic/bug.h Link: http://lkml.kernel.org/r/1480369871-5271-37-git-send-email-mawilcox@linuxonhyperv.comSigned-off-by:
-
Jan Kara authored
Currently we never clear dirty tags in DAX mappings and thus address ranges to flush accumulate. Now that we have locking of radix tree entries, we have all the locking necessary to reliably clear the radix tree dirty tag when flushing caches for corresponding address range. Similarly to page_mkclean() we also have to write-protect pages to get a page fault when the page is next written to so that we can mark the entry dirty again. Link: http://lkml.kernel.org/r/1479460644-25076-21-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jan Kara authored
Currently PTE gets updated in wp_pfn_shared() after dax_pfn_mkwrite() has released corresponding radix tree entry lock. When we want to writeprotect PTE on cache flush, we need PTE modification to happen under radix tree entry lock to ensure consistent updates of PTE and radix tree (standard faults use page lock to ensure this consistency). So move update of PTE bit into dax_pfn_mkwrite(). Link: http://lkml.kernel.org/r/1479460644-25076-20-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently, flushing of caches for DAX mappings was ignoring entry lock. So far this was ok (modulo a bug that a difference in entry lock could cause cache flushing to be mistakenly skipped) but in the following patches we will write-protect PTEs on cache flushing and clear dirty tags. For that we will need more exclusion. So do cache flushing under an entry lock. This allows us to remove one lock-unlock pair of mapping->tree_lock as a bonus. Link: http://lkml.kernel.org/r/1479460644-25076-19-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
DAX will need to implement its own version of page_check_address(). To avoid duplicating page table walking code, export follow_pte() which does what we need. Link: http://lkml.kernel.org/r/1479460644-25076-18-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently finish_mkwrite_fault() returns 0 when PTE got changed before we acquired PTE lock and VM_FAULT_WRITE when we succeeded in modifying the PTE. This is somewhat confusing since 0 generally means success, it is also inconsistent with finish_fault() which returns 0 on success. Change finish_mkwrite_fault() to return 0 on success and VM_FAULT_NOPAGE when PTE changed. Practically, there should be no behavioral difference since we bail out from the fault the same way regardless whether we return 0, VM_FAULT_NOPAGE, or VM_FAULT_WRITE. Also note that VM_FAULT_WRITE has no effect for shared mappings since the only two places that check it - KSM and GUP - care about private mappings only. Generally the meaning of VM_FAULT_WRITE for shared mappings is not well defined and we should probably clean that up. Link: http://lkml.kernel.org/r/1479460644-25076-17-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Provide a helper function for finishing write faults due to PTE being read-only. The helper will be used by DAX to avoid the need of complicating generic MM code with DAX locking specifics. Link: http://lkml.kernel.org/r/1479460644-25076-16-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
wp_page_reuse() handles write shared faults which is needed only in wp_page_shared(). Move the handling only into that location to make wp_page_reuse() simpler and avoid a strange situation when we sometimes pass in locked page, sometimes unlocked etc. Link: http://lkml.kernel.org/r/1479460644-25076-15-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
So far we set vmf->page during WP faults only when we needed to pass it to the ->page_mkwrite handler. Set it in all the cases now and use that instead of passing page pointer explicitly around. Link: http://lkml.kernel.org/r/1479460644-25076-14-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
We will need more information in the ->page_mkwrite() helper for DAX to be able to fully finish faults there. Pass vm_fault structure to do_page_mkwrite() and use it there so that information propagates properly from upper layers. Link: http://lkml.kernel.org/r/1479460644-25076-13-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently we duplicate handling of shared write faults in wp_page_reuse() and do_shared_fault(). Factor them out into a common function. Link: http://lkml.kernel.org/r/1479460644-25076-12-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Move final handling of COW faults from generic code into DAX fault handler. That way generic code doesn't have to be aware of peculiarities of DAX locking so remove that knowledge and make locking functions private to fs/dax.c. Link: http://lkml.kernel.org/r/1479460644-25076-11-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Introduce finish_fault() as a helper function for finishing page faults. It is rather thin wrapper around alloc_set_pte() but since we'd want to call this from DAX code or filesystems, it is still useful to avoid some boilerplate code. Link: http://lkml.kernel.org/r/1479460644-25076-10-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Patch series "dax: Clear dirty bits after flushing caches", v5. Patchset to clear dirty bits from radix tree of DAX inodes when caches for corresponding pfns have been flushed. In principle, these patches enable handlers to easily update PTEs and do other work necessary to finish the fault without duplicating the functionality present in the generic code. I'd like to thank Kirill and Ross for reviews of the series! This patch (of 20): To allow full handling of COW faults add memcg field to struct vm_fault and a return value of ->fault() handler meaning that COW fault is fully handled and memcg charge must not be canceled. This will allow us to remove knowledge about special DAX locking from the generic fault code. Link: http://lkml.kernel.org/r/1479460644-25076-9-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Add orig_pte field to vm_fault structure to allow ->page_mkwrite handlers to fully handle the fault. This also allows us to save some passing of extra arguments around. Link: http://lkml.kernel.org/r/1479460644-25076-8-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Instead of creating another vm_fault structure, use the one passed to wp_pfn_shared() for passing arguments into pfn_mkwrite handler. Link: http://lkml.kernel.org/r/1479460644-25076-7-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Use vm_fault structure to pass cow_page, page, and entry in and out of the function. That reduces number of __do_fault() arguments from 4 to 1. Link: http://lkml.kernel.org/r/1479460644-25076-6-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Instead of creating another vm_fault structure, use the one passed to __do_fault() for passing arguments into fault handler. Link: http://lkml.kernel.org/r/1479460644-25076-5-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
struct vm_fault has already pgoff entry. Use it instead of passing pgoff as a separate argument and then assigning it later. Link: http://lkml.kernel.org/r/1479460644-25076-4-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Every single user of vmf->virtual_address typed that entry to unsigned long before doing anything with it so the type of virtual_address does not really provide us any additional safety. Just use masked vmf->address which already has the appropriate type. Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently we have two different structures for passing fault information around - struct vm_fault and struct fault_env. DAX will need more information in struct vm_fault to handle its faults so the content of that structure would become event closer to fault_env. Furthermore it would need to generate struct fault_env to be able to call some of the generic functions. So at this point I don't think there's much use in keeping these two structures separate. Just embed into struct vm_fault all that is needed to use it for both purposes. Link: http://lkml.kernel.org/r/1479460644-25076-2-git-send-email-jack@suse.czSigned-off-by:
-
Lorenzo Stoakes authored
Unexport the low-level __get_user_pages_unlocked() function and replaces invocations with calls to more appropriate higher-level functions. In hva_to_pfn_slow() we are able to replace __get_user_pages_unlocked() with get_user_pages_unlocked() since we can now pass gup_flags. In async_pf_execute() and process_vm_rw_single_vec() we need to pass different tsk, mm arguments so get_user_pages_remote() is the sane replacement in these cases (having added manual acquisition and release of mmap_sem.) Additionally get_user_pages_remote() reintroduces use of the FOLL_TOUCH flag. However, this flag was originally silently dropped by commit 1e987790 ("mm/gup: Introduce get_user_pages_remote()"), so this appears to have been unintentional and reintroducing it is therefore not an issue. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20161027095141.2569-3-lstoakes@gmail.comSigned-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
-
