Introduce new function for generic inode syncing (vfs_fsync_range) and use
it from fsync() path. Introduce also new helper for syncing after a sync
write (generic_write_sync) using the generic function.

Use these new helpers for syncing from generic VFS functions. This makes
O_SYNC writes to block devices acquire i_mutex for syncing. If we really
care about this, we can make block_fsync() drop the i_mutex and reacquire
it before it returns.

CC: Evgeniy Polyakov <zbr@ioremap.net>
CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

generic_file_aio_write_nolock() is now used only by block devices and raw
character device. Filesystems should use __generic_file_aio_write() in case
generic_file_aio_write() doesn't suit them. So rename the function to
blkdev_aio_write() and move it to fs/blockdev.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

Use the new helper. We have to submit data pages ourselves in case of O_SYNC
write because __generic_file_aio_write does not do it for us. OCFS2 developpers
might think about moving the sync out of i_mutex which seems to be easily
possible but that's out of scope of this patch.

CC: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Use new helper __generic_file_aio_write(). Since the fs takes care of syncing
by itself afterwards, there are no more changes needed.

CC: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jan Kara <jack@suse.cz>

generic_file_direct_write() and generic_file_buffered_write() called
generic_osync_inode() if it was called on O_SYNC file or IS_SYNC inode. But
this is superfluous since generic_file_aio_write() does the syncing as well.
Also XFS and OCFS2 which call these functions directly handle syncing
themselves. So let's have a single place where syncing happens:
generic_file_aio_write().

We slightly change the behavior by syncing only the range of file to which the
write happened for buffered writes but that should be all that is required.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
Signed-off-by: Jan Kara <jack@suse.cz>

Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add
comments to write helpers explaining how they should be used and export
__generic_file_aio_write() since it will be used by some filesystems.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

This simple helper saves some filesystems conversion from byte offset
to page numbers and also makes the fdata* interface more complete.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits)
  NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3'
  NFS: Allow the "nfs" file system type to support NFSv4
  NFS: Move details of nfs4_get_sb() to a helper
  NFS: Refactor NFSv4 text-based mount option validation
  NFS: Mount option parser should detect missing "port="
  NFS: out of date comment regarding O_EXCL above nfs3_proc_create()
  NFS: Handle a zero-length auth flavor list
  SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
  nfs: fix compile error in rpc_pipefs.h
  nfs: Remove reference to generic_osync_inode from a comment
  SUNRPC: cache must take a reference to the cache detail's module on open()
  NFS: Use the DNS resolver in the mount code.
  NFS: Add a dns resolver for use with NFSv4 referrals and migration
  SUNRPC: Fix a typo in cache_pipefs_files
  nfs: nfs4xdr: optimize low level decoding
  nfs: nfs4xdr: get rid of READ_BUF
  nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline
  nfs: nfs4xdr: get rid of COPYMEM
  nfs: nfs4xdr: introduce decode_sessionid helper
  nfs: nfs4xdr: introduce decode_verifier helper
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
  pata_rz1000: use printk_once
  ahci: kill @force_restart and refine CLO for ahci_kick_engine()
  pata_cs5535: add pci id for AMD based CS5535 controllers
  ahci: Add AMD SB900 SATA/IDE controller device IDs
  drivers/ata: use resource_size
  sata_fsl: Defer non-ncq commands when ncq commands active
  libata: add SATA PMP revision information for spec 1.2
  libata: fix off-by-one error in ata_tf_read_block()
  ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  dmi: extend dmi_get_year() to dmi_get_date()
  dmi: fix date handling in dmi_get_year()
  libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
  sata_sis: convert to slave_link
  sata_sil24: always set protocol override for non-ATAPI data commands
  libata: Export AHCI capabilities
  libata: Delegate nonrot flag setting to SCSI
  [libata] Add pata_rdc driver for RDC ATA devices
  drivers/ata: Remove unnecessary semicolons
  libata: remove spindown skipping and warning
  ...

Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
  sched: Fix sched::sched_stat_wait tracepoint field
  sched: Disable NEW_FAIR_SLEEPERS for now
  sched: Keep kthreads at default priority
  sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
  sched: Turn off child_runs_first
  sched: Ensure that a child can't gain time over it's parent after fork()
  sched: enable SD_WAKE_IDLE
  sched: Deal with low-load in wake_affine()
  sched: Remove short cut from select_task_rq_fair()
  sched: Turn on SD_BALANCE_NEWIDLE
  sched: Clean up topology.h
  sched: Fix dynamic power-balancing crash
  sched: Remove reciprocal for cpu_power
  sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
  sched: Try to deal with low capacity
  sched: Scale down cpu_power due to RT tasks
  sched: Implement dynamic cpu_power
  sched: Add smt_gain
  sched: Update the cpu_power sum during load-balance
  sched: Add SD_PREFER_SIBLING
  ...

Merge branch 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  perf tools: Avoid unnecessary work in directory lookups
  perf stat: Clean up statistics calculations a bit more
  perf stat: More advanced variance computation
  perf stat: Use stddev_mean in stead of stddev
  perf stat: Remove the limit on repeat
  perf stat: Change noise calculation to use stddev
  x86, perf_counter, bts: Do not allow kernel BTS tracing for now
  x86, perf_counter, bts: Correct pointer-to-u64 casts
  x86, perf_counter, bts: Fail if BTS is not available
  perf_counter: Fix output-sharing error path
  perf trace: Fix read_string()
  perf trace: Print out in nanoseconds
  perf tools: Seek to the end of the header area
  perf trace: Fix parsing of perf.data
  perf trace: Sample timestamps as well
  perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access
  perf trace: Sample the CPU too
  perf tools: Work around strict aliasing related warnings
  perf tools: Clean up warnings list in the Makefile
  perf tools: Complete support for dynamic strings
  ...

Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits)
  arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type
  Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()"
  x86/oprofile: Small coding style fixes
  x86/oprofile: Add counter reservation check for virtual counters
  x86/oprofile: Implement op_x86_virt_to_phys()
  oprofile: Adding switch counter to oprofile statistic variables
  x86/oprofile: Implement mux_clone()
  x86/oprofile: Enable multiplexing only if the model supports it
  x86/oprofile: Add function has_mux() to check multiplexing support
  x86/oprofile: Modify initialization of num_virt_counters
  x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
  x86/oprofile: Remove const qualifier from struct op_x86_model_spec
  x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
  x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
  x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
  x86/oprofile: Implement multiplexing setup/shutdown functions
  oprofile: Grouping multiplexing code in op_model_amd.c
  oprofile: Introduce op_x86_phys_to_virt()
  oprofile: Grouping multiplexing code in oprof.c
  oprofile: Remove oprofile_multiplexing_init()
  ...

Merge branch 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Do not mask oneshot edge type interrupts
  genirq: Support nested threaded irq handling
  genirq: Add buslock support
  genirq: Add oneshot support

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  pci/intr_remapping: Allocate irq_iommu on node
  irq: Add irq_node() primitive
  irq: Make sure irq_desc for legacy irq get correct node setting
  genirq: Add prototype for handle_nested_irq()
  irq: Remove superfluous NULL pointer check in check_irq_resend()
  irq: Clean up by removing irqfixup MODULE_PARM_DESC()
  genirq: Fix comment describing suspend_device_irqs()
  genirq: Remove obsolete defines and typedefs

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  rcu: Move end of special early-boot RCU operation earlier
  rcu: Changes from reviews: avoid casts, fix/add warnings, improve comments
  rcu: Create rcutree plugins to handle hotplug CPU for multi-level trees
  rcu: Remove lockdep annotations from RCU's _notrace() API members
  rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
  rcu: Add CPU-offline processing for single-node configurations
  rcu: Add "notrace" to RCU function headers used by ftrace
  rcu: Remove CONFIG_PREEMPT_RCU
  rcu: Merge preemptable-RCU functionality into hierarchical RCU
  rcu: Simplify rcu_pending()/rcu_check_callbacks() API
  rcu: Use debugfs_remove_recursive() simplify code.
  rcu: Merge per-RCU-flavor initialization into pre-existing macro
  rcu: Fix online/offline indication for rcudata.csv trace file
  rcu: Consolidate sparse and lockdep declarations in include/linux/rcupdate.h
  rcu: Renamings to increase RCU clarity
  rcu: Move private definitions from include/linux/rcutree.h to kernel/rcutree.h
  rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
  rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
  rcu: Fix typo in rcu_irq_exit() comment header
  rcu: Make rcupreempt_trace.c look at offline CPUs
  ...

Merge branch 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: Fix "printk: Enable the use of more than one CON_BOOT (early console)"
  printk: Restore previous console_loglevel when re-enabling logging
  printk: Ensure that "console enabled" messages are printed on the console
  printk: Enable the use of more than one CON_BOOT (early console)

Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  locking, m68k/asm-offsets: Rename signal defines
  locking: Inline spinlock code for all locking variants on s390
  locking: Simplify spinlock inlining
  locking: Allow arch-inlined spinlocks
  locking: Move spinlock function bodies to header file
  locking, m68k: Calculate thread_info offset with asm offset
  locking, m68k/asm-offsets: Rename pt_regs offset defines
  locking, sparc: Rename __spin_try_lock() and friends
  locking, powerpc: Rename __spin_try_lock() and friends
  lockdep: Remove recursion stattistics
  lockdep: Simplify lock_stat seqfile code
  lockdep: Simplify lockdep_chains seqfile code
  lockdep: Simplify lockdep seqfile code
  lockdep: Fix missing entries in /proc/lock_chains
  lockdep: Fix missing entry in /proc/lock_stat
  lockdep: Fix memory usage info of BFS
  lockdep: Reintroduce generation count to make BFS faster
  lockdep: Deal with many similar locks
  lockdep: Introduce lockdep_assert_held()
  lockdep: Fix style nits
  ...

Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (59 commits)
  x86/gart: Do not select AGP for GART_IOMMU
  x86/amd-iommu: Initialize passthrough mode when requested
  x86/amd-iommu: Don't detach device from pt domain on driver unbind
  x86/amd-iommu: Make sure a device is assigned in passthrough mode
  x86/amd-iommu: Align locking between attach_device and detach_device
  x86/amd-iommu: Fix device table write order
  x86/amd-iommu: Add passthrough mode initialization functions
  x86/amd-iommu: Add core functions for pd allocation/freeing
  x86/dma: Mark iommu_pass_through as __read_mostly
  x86/amd-iommu: Change iommu_map_page to support multiple page sizes
  x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
  x86/amd-iommu: Remove old page table handling macros
  x86/amd-iommu: Use 2-level page tables for dma_ops domains
  x86/amd-iommu: Remove bus_addr check in iommu_map_page
  x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX
  x86/amd-iommu: Change alloc_pte to support 64 bit address space
  x86/amd-iommu: Introduce increase_address_space function
  x86/amd-iommu: Flush domains if address space size was increased
  x86/amd-iommu: Introduce set_dte_entry function
  x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices
  ...

Merge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Detect mismatched requeue targets
  futex: Correct futex_wait_requeue_pi() commentary

Merge branch 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug lockups: Improve lockup detection, fix generic arch fallback
  debug lockups: Improve lockup detection

Merge branch 'core-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  workqueues: Improve schedule_work() documentation

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (102 commits)
  crypto: sha-s390 - Fix warnings in import function
  crypto: vmac - New hash algorithm for intel_txt support
  crypto: api - Do not displace newly registered algorithms
  crypto: ansi_cprng - Fix module initialization
  crypto: xcbc - Fix alignment calculation of xcbc_tfm_ctx
  crypto: fips - Depend on ansi_cprng
  crypto: blkcipher - Do not use eseqiv on stream ciphers
  crypto: ctr - Use chainiv on raw counter mode
  Revert crypto: fips - Select CPRNG
  crypto: rng - Fix typo
  crypto: talitos - add support for 36 bit addressing
  crypto: talitos - align locks on cache lines
  crypto: talitos - simplify hmac data size calculation
  crypto: mv_cesa - Add support for Orion5X crypto engine
  crypto: cryptd - Add support to access underlaying shash
  crypto: gcm - Use GHASH digest algorithm
  crypto: ghash - Add GHASH digest algorithm for GCM
  crypto: authenc - Convert to ahash
  crypto: api - Fix aligned ctx helper
  crypto: hmac - Prehash ipad/opad
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (377 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: hda - Use auto model for HP laptops with ALC268 codec
  ALSA: cs46xx - Fix minimum period size
  ASoC: Fix WM835x Out4 capture enumeration
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ASoC: Remove unuused hw_read_t
  sound: oxygen: work around MCE when changing volume
  ALSA: dummy - Fake buffer allocations
  ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
  ASoC: fix pxa2xx-ac97.c breakage
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode
  ALSA: Release v1.0.21
  ...

* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: check for registered bdi in flusher add and inode dirty
  writeback: add name to backing_dev_info
  writeback: add some debug inode list counters to bdi stats
  writeback: get rid of pdflush completely
  writeback: switch to per-bdi threads for flushing data
  writeback: move dirty inodes from super_block to backing_dev_info
  writeback: get rid of generic_sync_sb_inodes() export

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (54 commits)
  [S390] tape: Use pr_xxx instead of dev_xxx in shared driver code
  [S390] Wire up page fault events for software perf counters.
  [S390] Remove smp_cpu_not_running.
  [S390] Get rid of cpuid.h header file.
  [S390] Limit cpu detection to 256 physical cpus.
  [S390] tape: Fix device online messages
  [S390] Enable guest page hinting by default.
  [S390] use generic scatterlist.h
  [S390] s390dbf: Add description for usage of "%s" in sprintf events
  [S390] Initialize __LC_THREAD_INFO early.
  [S390] fix recursive locking on page_table_lock
  [S390] kvm: use console_initcall() to initialize s390 virtio console
  [S390] tape: reversed order of labels
  [S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf
  [S390] kernel: Print an error message if kernel NSS cannot be defined
  [S390] zcrypt: Free ap_device if dev_set_name fails.
  [S390] zcrypt: Use spin_lock_bh in suspend callback
  [S390] xpram: Remove checksum validation for suspend/resume
  [S390] vmur: Invalid allocation sequence for vmur class
  [S390] hypfs: remove useless variable qname
  ...

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Improve the "Early log buffer exceeded" error message
  kmemleak: fix sparse warning for static declarations
  kmemleak: fix sparse warning over overshadowed flags
  kmemleak: move common painting code together
  kmemleak: add clear command support
  kmemleak: use bool for true/false questions
  kmemleak: Do no create the clean-up thread during kmemleak_disable()
  kmemleak: Scan all thread stacks
  kmemleak: Don't scan uninitialized memory when kmemcheck is enabled
  kmemleak: Ignore the aperture memory hole on x86_64
  kmemleak: Printing of the objects hex dump
  kmemleak: Do not report alloc_bootmem blocks as leaks
  kmemleak: Save the stack trace for early allocations
  kmemleak: Mark the early log buffer as __initdata
  kmemleak: Dump object information on request
  kmemleak: Allow rescheduling during an object scanning

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits)
  RDMA/iwcm: Reject the connection when the cm_id is destroyed
  RDMA/cxgb3: Clean up properly on FW mismatch failures
  RDMA/cxgb3: Don't ignore insert_handle() failures
  MAINTAINERS: InfiniBand/RDMA mailing list transition to vger
  IB/mad: Allow tuning of QP0 and QP1 sizes
  IB/mad: Fix possible lock-lock-timer deadlock
  RDMA/nes: Map MTU to IB_MTU_* and correctly report link state
  RDMA/nes: Rework the disconn routine for terminate and flushing
  RDMA/nes: Use the flush code to fill in cqe error
  RDMA/nes: Make poll_cq return correct number of wqes during flush
  RDMA/nes: Use flush mechanism to set status for wqe in error
  RDMA/nes: Implement Terminate Packet
  RDMA/nes: Add CQ error handling
  RDMA/nes: Clean out CQ completions when QP is destroyed
  RDMA/nes: Change memory allocation for cqp request to GFP_ATOMIC
  RDMA/nes: Allocate work item for disconnect event handling
  RDMA/nes: Update refcnt during disconnect
  IB/mthca: Don't allow userspace open while recovering from catastrophic error
  IB/mthca: Distinguish multiple devices in /proc/interrupts
  IB/mthca: Annotate CQ locking
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (57 commits)
  binfmt_elf: fix PT_INTERP bss handling
  TPM: Fixup boot probe timeout for tpm_tis driver
  sysfs: Add labeling support for sysfs
  LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information.
  VFS: Factor out part of vfs_setxattr so it can be called from the SELinux hook for inode_setsecctx.
  KEYS: Add missing linux/tracehook.h #inclusions
  KEYS: Fix default security_session_to_parent()
  Security/SELinux: includecheck fix kernel/sysctl.c
  KEYS: security_cred_alloc_blank() should return int under all circumstances
  IMA: open new file for read
  KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
  KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]
  KEYS: Do some whitespace cleanups [try #6]
  KEYS: Make /proc/keys use keyid not numread as file position [try #6]
  KEYS: Add garbage collection for dead, revoked and expired keys. [try #6]
  KEYS: Flag dead keys to induce EKEYREVOKED [try #6]
  KEYS: Allow keyctl_revoke() on keys that have SETATTR but not WRITE perm [try #6]
  KEYS: Deal with dead-type keys appropriately [try #6]
  CRED: Add some configurable debugging [try #6]
  selinux: Support for the new TUN LSM hooks
  ...

Based on a suggestion from Jaswinder, clarify what the user would need
to do to avoid this error message from kmemleak.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

For messages from the tape core that is shared between the 3590 and 34xx
tape disciplines, we want to have the "tape" prefix instead of "tape_3590"
or "tape_34xx". In order to fix this, we now use the pr_xxx printk macros.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

smp_cpu_not_running() and cpu_stopped() are doing the same.
Remove one and also get rid of the last hard_smp_processor_id() leftover.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Merge cpuid.h header file into cpu.h.
While at it convert from typedef to struct declaration and also
convert cio code to use proper lowcore structure instead of casts.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Saves us more than 65k pointless IPIs.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently, when a tape device is set online and no cartridge is loaded, we
get the messages "The tape cartridge has been successfully unloaded" and
"Determining the size of the recorded area". These messages are not correct.
To fix this, we now print the "cartridge loaded/unloaded" messages only,
when the load/unload event really occurs. In addition to that, the message
"Determining the size of the recorded area" is only printed, if a cartridge
is loaded.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Get rid of the PAGE_STATES config option and enable guest page hinting
by default.
It can be disabled by specifying "cmma=off" at the command line.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Using "%s" in sprintf event functions is dangerous. This patch adds a short
description for this issue to the s390 debug feature documentation.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>