If the probing finishes without success, it will leave the value 15 in
the TPM_IRQ_VECTOR register. If the driver is unloaded and reloaded, it
will "think" that the hardware had been programmed with IRQ 15, and will
not probe again.

This patch restores the original value in the IO memory if no IRQ is
probed.
Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <PeterHuewe@gmx.de>

Release IRQs used for probing only. Otherwise the TPM will end up
with all IRQs 3-15 assigned.

Fixes: afb5abc2 ("tpm: two-phase chip management functions")
Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <PeterHuewe@gmx.de>

Merge tag 'keys-next-20151021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next

The crypto framework can be built as a loadable module, but the
apparmor hash code can only be built-in, which then causes a
link error:

security/built-in.o: In function `aa_calc_profile_hash':
integrity_audit.c:(.text+0x21610): undefined reference to `crypto_shash_update'
security/built-in.o: In function `init_profile_hash':
integrity_audit.c:(.init.text+0xb4c): undefined reference to `crypto_alloc_shash'

This changes Apparmor to use 'select CRYPTO' like a lot of other
subsystems do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

The size of struct file_security_struct is 16byte at my setup.
But, the real allocation size for per each file_security_struct
is 64bytes in my setup that kmalloc min size is 64bytes
because ARCH_DMA_MINALIGN is 64.

This allocation is called every times at file allocation(alloc_file()).
So, the total slack memory size(allocated size - request size)
is increased exponentially.

E.g) Min Kmalloc Size : 64bytes, Unit : bytes
      Allocated Size | Request Size | Slack Size | Allocation Count
    ---------------------------------------------------------------
         770048      |    192512    |   577536   |      12032

At the result, this change reduce memory usage 42bytes per each
file_security_struct
Signed-off-by: Sangwoo <sangwoo2.park@lge.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: removed extra subject prefix]
Signed-off-by: Paul Moore <pmoore@redhat.com>

Fixes the following sparse warning:

 security/selinux/hooks.c:3242:5: warning: symbol 'ioctl_has_perm' was
 not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

sprintf returns the number of characters printed (excluding '\0'), so
we can use that and avoid duplicating the length computation.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

This is much simpler.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

security_context_to_sid() expects a const char* argument, so there's
no point in casting away the const qualifier of value.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

There seems to be a little confusion as to whether the scontext_len
parameter of security_context_to_sid() includes the nul-byte or
not. Reading security_context_to_sid_core(), it seems that the
expectation is that it does not (both the string copying and the test
for scontext_len being zero hint at that).

Introduce the helper security_context_str_to_sid() to do the strlen()
call and fix all callers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

Use the ATTR_FILE attribute to distinguish between truncate()
and ftruncate() system calls. The two other cases where
do_truncate is called with a filp (and therefore ATTR_FILE is set)
are for coredump files and for open(O_TRUNC). In both of those cases
the open permission has already been checked during file open and
therefore does not need to be repeated.

Commit 95dbf739 ("SELinux: check OPEN on truncate calls")
fixed a major issue where domains were allowed to truncate files
without the open permission. However, it introduced a new bug where
a domain with the write permission can no longer ftruncate files
without the open permission, even when they receive an already open
file.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>

Change the SELinux checkreqprot default value to 0 so that SELinux
performs access control checking on the actual memory protections
used by the kernel and not those requested by the application.
Signed-off-by: Paul Moore <pmoore@redhat.com>

Merge the type-specific data with the payload data into one four-word chunk
as it seems pointless to keep them separate.

Use user_key_payload() for accessing the payloads of overloaded
user-defined keys.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
cc: ecryptfs@vger.kernel.org
cc: linux-ext4@vger.kernel.org
cc: linux-f2fs-devel@lists.sourceforge.net
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-ima-devel@lists.sourceforge.net

The supplied script takes a signed module file and extracts the tailmost
signature (there could theoretically be more than one) and dumps all or
part of it or the unsigned file to stdout.

Call as:

	scripts/extract-module-sig.pl -[0adnks] module-file >out

where the initial flag indicates which bit of the signed file you want dumping
to stdout:

 (*) "-0".  Dumps the unsigned data with the signature stripped.

 (*) "-a".  Dumps all of the signature data, including the magic number.

 (*) "-d".  Dumps the signature information block as a sequence of decimal
     	    numbers in text form with spaces between (crypto algorithm type,
     	    hash type, identifier type, signer's name length, key identifier
     	    length and signature length).

 (*) "-n".  Dumps the signer's name contents.

 (*) "-k".  Dumps the key identifier contents.

 (*) "-s".  Dumps the cryptographic signature contents.

In the case that the signature is a PKCS#7 (or CMS) message, -n and -k will
print a warning to stderr and dump nothing to stdout, but will otherwise
complete okay; the entire PKCS#7/CMS message will be dumped by "-s"; and "-d"
will show "0 0 2 0 0 <pkcs#7-msg-len>".
Signed-off-by: David Howells <dhowells@redhat.com>

The supplied script takes a vmlinux file - and if necessary a System.map
file - locates the system certificates list and extracts it to the named
file.

Call as:

    ./scripts/extract-sys-certs vmlinux certs

if vmlinux contains symbols and:

    ./scripts/extract-sys-certs -s System.map vmlinux certs

if it does not.

It prints something like the following to stdout:

	Have 27 sections
	No symbols in vmlinux, trying System.map
	Have 80088 symbols
	Have 1346 bytes of certs at VMA 0xffffffff8201c540
	Certificate list in section .init.data
	Certificate list at file offset 0x141c540

If vmlinux contains symbols then that is used rather than System.map - even
if one is given.
Signed-off-by: David Howells <dhowells@redhat.com>

key->description and key->index_key.description are same because
they are unioned. But, for readability, using same name for
duplication and validation seems better.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Currently we see this in "git status" if we build in the source dir:

Untracked files:
  (use "git add <file>..." to include in what will be committed)

        certs/x509_certificate_list

It looks like it used to live in kernel/ so we squash that .gitignore
entry at the same time.  I didn't bother to dig through git history to
see when it moved, since it is just a minor annoyance at most.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: keyrings@linux-nfs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David Howells <dhowells@redhat.com>

There is no need to make a flag to tell that this memory is allocated by
kmalloc or vmalloc. Just use kvfree to free the memory.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next

This feature introduces new kernel interface:

- <smack_fs>/relabel-self - for setting transition labels list

This list is used to control smack label transition mechanism.
List is set by, and per process. Process can transit to new label only if
label is on the list. Only process with CAP_MAC_ADMIN capability can add
labels to this list. With this list, process can change it's label without
CAP_MAC_ADMIN but only once. After label changing, list is unset.

Changes in v2:
* use list_for_each_entry instead of _rcu during label write
* added missing description in security/Smack.txt

Changes in v3:
* squashed into one commit

Changes in v4:
* switch from global list to per-task list
* since the per-task list is accessed only by the task itself
  there is no need to use synchronization mechanisms on it

Changes in v5:
* change smackfs interface of relabel-self to the one used for onlycap
  multiple labels are accepted, separated by space, which
  replace the previous list upon write
Signed-off-by: Zbigniew Jasinski <z.jasinski@samsung.com>
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>

The base pointer for the event log is allocated in the local
kernel (in prom_instantiate_sml()), therefore it is already in
the host's endian byte order and requires no conversion.

The content of the 'basep' pointer in read_log() stores the
base address of the log. This patch ensures that it is correctly
implemented.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This patch makes the code endianness independent. We defined a
macro do_endian_conversion to apply endianness to raw integers
in the event entries so that they will be displayed properly.
tpm_binary_bios_measurements_show() is modified for the display.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

The OS should ask Power Firmware (PFW) for the size of the buffer
allocated for the event log, instead of the size of the actual
event log.  It then passes the buffer adddress and size to PFW in
the handover process, into which PFW copies the log.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

The event log generated by OpenFirmware in PowerPC is 4-byte aligned.
This patch reformats the log to be byte-aligned for the Linux client.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Replace all occurrences of '/ibm,vtpm' with '/vdevice/vtpm',
as only the latter is guanranteed to be available for the client OS.
The '/ibm,vtpm' node should only be used by Open Firmware, which
is susceptible to changes.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

At the moment, no one has time to pay enough attention to this subsystem
so that patches get eventually merged into linux-next. Even critical bug
fixes can lie for weeks.

I'm happy to continue with the current maintainers if they are able to
do their job but if this is not the case I cannot find any other
solution but apply myself for the job.

If there is someone more experienced and/or competent, I'm also happy
to let one take the stand. Anything works as long as it works. I just
want a solution for this bottleneck.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Call tpm_seal_trusted() and tpm_unseal_trusted() for TPM 2.0 chips.
We require explicit 'keyhandle=' option because there's no a fixed
storage root key inside TPM2 chips.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Andreas Fuchs <andreas.fuchs@sit.fraunhofer.de>
Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (on TPM 1.2)
Tested-by: Chris J Arges <chris.j.arges@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Kevin Strasser <kevin.strasser@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Added tpm_trusted_seal() and tpm_trusted_unseal() API for sealing
trusted keys.

This patch implements basic sealing and unsealing functionality for
TPM 2.0:

* Seal with a parent key using a 20 byte auth value.
* Unseal with a parent key using a 20 byte auth value.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Moved struct trusted_key_options to trustes-type.h so that the fields
can be accessed from drivers/char/tpm.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

This patch introduces struct tpm_buf that provides a string buffer for
constructing TPM commands. This allows to construct variable sized TPM
commands. For the buffer a page is allocated and mapped, which limits
maximum size to PAGE_SIZE.

Variable sized TPM commands are needed in order to add algorithmic
agility.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Updated Documentation/ABI/testing/sysfs-driver-ppi in order to explain
where PPI attributes are located and how backwards compatibility is
addressed.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Moved PPI attributes to the character device directory. This aligns with
the sysfs guidelines and makes them race free because they are created
atomically with the character device as part of device_register().The
character device and the sysfs attributes appear at the same time to the
user space.

As part of this change we enable PPI attributes also for TPM 2.0
devices. In order to retain backwards compatibility with TPM 1.x
devices, a symlink is created to the platform device directory.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (on TPM 1.2)
Tested-by: Chris J Arges <chris.j.arges@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Added a new function __compat_only_sysfs_link_group_to_kobj() that adds
a symlink from attribute or group to a kobject. This needed for
maintaining backwards compatibility with PPI attributes in the TPM
driver.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Both for FIFO and CRB interface TCG has decided to use the same HID
MSFT0101. They can be differentiated by looking at the start method from
TPM2 ACPI table. This patches makes necessary fixes to tpm_tis and
tpm_crb modules in order to correctly detect, which module should be
used.

For MSFT0101 we must use struct acpi_driver because struct pnp_driver
has a 7 character limitation.

It turned out that the root cause in b371616b was not correct for
https://bugzilla.kernel.org/show_bug.cgi?id=98181.

v2:

* One fixup was missing from v1: is_tpm2_fifo -> is_fifo

v3:

* Use pnp_driver for existing HIDs and acpi_driver only for MSFT0101 in
  order ensure backwards compatibility.

v4:

* Check for FIFO before doing *anything* in crb_acpi_add().
* There was return immediately after acpi_bus_unregister_driver() in
  cleanup_tis(). This caused pnp_unregister_driver() not to be called.

Cc: stable@kernel.org
Reported-by: Michael Saunders <mick.saunders@gmail.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Reported-by: Jethro Beekman <kernel@jbeekman.nl>
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Michael Marley <michael@michaelmarley.com>
Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (on TPM 1.2)
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

The command buffer address must be read with exactly two 32-bit reads.
Otherwise, on some HW platforms, it seems that HW will abort the read
operation, which causes CPU to fill the read bytes with 1's. Therefore,
we cannot rely on memcpy_fromio() but must call ioread32() two times
instead.

Also, this matches the PC Client Platform TPM Profile specification,
which defines command buffer address with two 32-bit fields.

Cc: stable@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt
handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate
memory for rtce buffer.  The current code uses 'GFP_KERNEL' as the
type of kernel memory allocation, which resulted a warning at
kernel/lockdep.c.  This patch uses 'GFP_ATOMIC' instead so that the
allocation is high-priority and does not sleep.

Cc: stable@kernel.org
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>