- 04 Feb, 2021 40 commits
-
-
Wei Huang authored
Under the case of nested on nested (L0, L1, L2 are all hypervisors), we do not support emulation of the vVMLOAD/VMSAVE feature, the L0 hypervisor can inject the proper #VMEXIT to inform L1 of what is happening and L1 can avoid invoking the #GP workaround. For this reason we turns on guest VM's X86_FEATURE_SVME_ADDR_CHK bit for KVM running inside VM to receive the notification and change behavior. Similarly we check if vcpu is under guest mode before emulating the vmware-backdoor instructions. For the case of nested on nested, we let the guest handle it. Co-developed-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Wei Huang <wei.huang2@amd.com> Tested-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wei Huang authored
New AMD CPUs have a change that checks #VMEXIT intercept on special SVM instructions before checking their EAX against reserved memory region. This change is indicated by CPUID_0x8000000A_EDX[28]. If it is 1, #VMEXIT is triggered before #GP. KVM doesn't need to intercept and emulate #GP faults as #GP is supposed to be triggered. Co-developed-by:
-
Bandan Das authored
While running SVM related instructions (VMRUN/VMSAVE/VMLOAD), some AMD CPUs check EAX against reserved memory regions (e.g. SMM memory on host) before checking VMCB's instruction intercept. If EAX falls into such memory areas, #GP is triggered before VMEXIT. This causes problem under nested virtualization. To solve this problem, KVM needs to trap #GP and check the instructions triggering #GP. For VM execution instructions, KVM emulates these instructions. Co-developed-by:
-
Wei Huang authored
Move the instruction decode part out of x86_emulate_instruction() for it to be used in other places. Also kvm_clear_exception_queue() is moved inside the if-statement as it doesn't apply when KVM are coming back from userspace. Co-developed-by:
-
Chenyi Qiang authored
DR6_INIT contains the 1-reserved bits as well as the bit that is cleared to 0 when the condition (e.g. RTM) happens. The value can be used to initialize dr6 and also be the XOR mask between the #DB exit qualification (or payload) and DR6. Concerning that DR6_INIT is used as initial value only once, rename it to DR6_ACTIVE_LOW and apply it in other places, which would make the incoming changes for bus lock debug exception more simple. Signed-off-by:
Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20210202090433.13441-2-chenyi.qiang@intel.com> [Define DR6_FIXED_1 from DR6_ACTIVE_LOW and DR6_VOLATILE. - Paolo] Signed-off-by:
-
Like Xu authored
This test will check the effect of various CPUID settings on the MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes with KVM_SET_MSR is _not_ modified from the guest and can be retrieved with KVM_GET_MSR, and check that invalid LBR formats are rejected. Signed-off-by:
Like Xu <like.xu@linux.intel.com> Message-Id: <20210201051039.255478-12-like.xu@linux.intel.com> Signed-off-by:
-
Like Xu authored
Userspace could enable guest LBR feature when the exactly supported LBR format value is initialized to the MSR_IA32_PERF_CAPABILITIES and the LBR is also compatible with vPMU version and host cpu model. The LBR could be enabled on the guest if host perf supports LBR (checked via x86_perf_get_lbr()) and the vcpu model is compatible with the host one. Signed-off-by:
-
Like Xu authored
The vPMU uses GUEST_LBR_IN_USE_IDX (bit 58) in 'pmu->pmc_in_use' to indicate whether a guest LBR event is still needed by the vcpu. If the vcpu no longer accesses LBR related registers within a scheduling time slice, and the enable bit of LBR has been unset, vPMU will treat the guest LBR event as a bland event of a vPMC counter and release it as usual. Also, the pass-through state of LBR records msrs is cancelled. Signed-off-by:
-
Like Xu authored
The current vPMU only supports Architecture Version 2. According to Intel SDM "17.4.7 Freezing LBR and Performance Counters on PMI", if IA32_DEBUGCTL.Freeze_LBR_On_PMI = 1, the LBR is frozen on the virtual PMI and the KVM would emulate to clear the LBR bit (bit 0) in IA32_DEBUGCTL. Also, guest needs to re-enable IA32_DEBUGCTL.LBR to resume recording branches. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Message-Id: <20210201051039.255478-9-like.xu@linux.intel.com> Signed-off-by:
-
Like Xu authored
When the LBR records msrs has already been pass-through, there is no need to call vmx_update_intercept_for_lbr_msrs() again and again, and vice versa. Signed-off-by:
-
Like Xu authored
In addition to DEBUGCTLMSR_LBR, any KVM trap caused by LBR msrs access will result in a creation of guest LBR event per-vcpu. If the guest LBR event is scheduled on with the corresponding vcpu context, KVM will pass-through all LBR records msrs to the guest. The LBR callstack mechanism implemented in the host could help save/restore the guest LBR records during the event context switches, which reduces a lot of overhead if we save/restore tens of LBR msrs (e.g. 32 LBR records entries) in the much more frequent VMX transitions. To avoid reclaiming LBR resources from any higher priority event on host, KVM would always check the exist of guest LBR event and its state before vm-entry as late as possible. A negative result would cancel the pass-through state, and it also prevents real registers accesses and potential data leakage. If host reclaims the LBR between two checks, the interception state and LBR records can be safely preserved due to native save/restore support from guest LBR event. The KVM emits a pr_warn() when the LBR hardware is unavailable to the guest LBR event. The administer is supposed to reminder users that the guest result may be inaccurate if someone is using LBR to record hypervisor on the host side. Suggested-by:
Wei Wang <wei.w.wang@intel.com> Signed-off-by:
-
Like Xu authored
When vcpu sets DEBUGCTLMSR_LBR in the MSR_IA32_DEBUGCTLMSR, the KVM handler would create a guest LBR event which enables the callstack mode and none of hardware counter is assigned. The host perf would schedule and enable this event as usual but in an exclusive way. The guest LBR event will be released when the vPMU is reset but soon, the lazy release mechanism would be applied to this event like a vPMC. Suggested-by:
-
Like Xu authored
Usespace could set the bits [0, 5] of the IA32_PERF_CAPABILITIES MSR which tells about the record format stored in the LBR records. The LBR will be enabled on the guest if host perf supports LBR (checked via x86_perf_get_lbr()) and the vcpu model is compatible with the host one. Signed-off-by:
-
Paolo Bonzini authored
Usespace could set the bits [0, 5] of the IA32_PERF_CAPABILITIES MSR which tells about the record format stored in the LBR records. The LBR will be enabled on the guest if host perf supports LBR (checked via x86_perf_get_lbr()) and the vcpu model is compatible with the host one. Signed-off-by:
-
Paolo Bonzini authored
Once MSR_IA32_PERF_CAPABILITIES is changed via vmx_set_msr(), the value should not be changed by cpuid(). To ensure that the new value is kept, the default initialization path is moved to intel_pmu_init(). The effective value of the MSR will be 0 if PDCM is clear, however. Signed-off-by: -
Like Xu authored
To make code responsibilities clear, we may resue and invoke the vmx_set_intercept_for_msr() in other vmx-specific files (e.g. pmu_intel.c), so expose it to passthrough LBR msrs later. Signed-off-by:
-
Like Xu authored
SVM already has specific handlers of MSR_IA32_DEBUGCTLMSR in the svm_get/set_msr, so the x86 common part can be safely moved to VMX. This allows KVM to store the bits it supports in GUEST_IA32_DEBUGCTL. Add vmx_supported_debugctl() to refactor the throwing logic of #GP. Signed-off-by:
-
Sean Christopherson authored
Use x2apic_mode instead of x2apic_enabled() when adjusting the destination ID during Posted Interrupt updates. This avoids the costly RDMSR that is hidden behind x2apic_enabled(). Reported-by:
luferry <luferry@163.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210115220354.434807-3-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Export x2apic_mode so that KVM can query whether x2APIC is active without having to incur the RDMSR in x2apic_enabled(). When Posted Interrupts are in use for a guest with an assigned device, KVM ends up checking for x2APIC at least once every time a vCPU halts. KVM could obviously snapshot x2apic_enabled() to avoid the RDMSR, but that's rather silly given that x2apic_mode holds the exact info needed by KVM. Signed-off-by:
-
Chenyi Qiang authored
Introduce a new capability named KVM_CAP_X86_BUS_LOCK_EXIT, which is used to handle bus locks detected in guest. It allows the userspace to do custom throttling policies to mitigate the 'noisy neighbour' problem. Signed-off-by:
-
Chenyi Qiang authored
Virtual Machine can exploit bus locks to degrade the performance of system. Bus lock can be caused by split locked access to writeback(WB) memory or by using locks on uncacheable(UC) memory. The bus lock is typically >1000 cycles slower than an atomic operation within a cache line. It also disrupts performance on other cores (which must wait for the bus lock to be released before their memory operations can complete). To address the threat, bus lock VM exit is introduced to notify the VMM when a bus lock was acquired, allowing it to enforce throttling or other policy based mitigations. A VMM can enable VM exit due to bus locks by setting a new "Bus Lock Detection" VM-execution control(bit 30 of Secondary Processor-based VM execution controls). If delivery of this VM exit was preempted by a higher priority VM exit (e.g. EPT misconfiguration, EPT violation, APIC access VM exit, APIC write VM exit, exception bitmap exiting), bit 26 of exit reason in vmcs field is set to 1. In current implementation, the KVM exposes this capability through KVM_CAP_X86_BUS_LOCK_EXIT. The user can get the supported mode bitmap (i.e. off and exit) and enable it explicitly (disabled by default). If bus locks in guest are detected by KVM, exit to user space even when current exit reason is handled by KVM internally. Set a new field KVM_RUN_BUS_LOCK in vcpu->run->flags to inform the user space that there is a bus lock detected in guest. Document for Bus Lock VM exit is now available at the latest "Intel Architecture Instruction Set Extensions Programming Reference". Document Link: https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.htmlCo-developed-by:
Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
-
Chenyi Qiang authored
Reset the vcpu->run->flags at the beginning of kvm_arch_vcpu_ioctl_run. It can avoid every thunk of code that needs to set the flag clear it, which increases the odds of missing a case and ending up with a flag in an undefined state. Signed-off-by:
-
Sean Christopherson authored
Convert vcpu_vmx.exit_reason from a u32 to a union (of size u32). The full VM_EXIT_REASON field is comprised of a 16-bit basic exit reason in bits 15:0, and single-bit modifiers in bits 31:16. Historically, KVM has only had to worry about handling the "failed VM-Entry" modifier, which could only be set in very specific flows and required dedicated handling. I.e. manually stripping the FAILED_VMENTRY bit was a somewhat viable approach. But even with only a single bit to worry about, KVM has had several bugs related to comparing a basic exit reason against the full exit reason store in vcpu_vmx. Upcoming Intel features, e.g. SGX, will add new modifier bits that can be set on more or less any VM-Exit, as opposed to the significantly more restricted FAILED_VMENTRY, i.e. correctly handling everything in one-off flows isn't scalable. Tracking exit reason in a union forces code to explicitly choose between consuming the full exit reason and the basic exit, and is a convenient way to document and access the modifiers. No functional change intended. Cc: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Brijesh Singh authored
The SEV FW version >= 0.23 added a new command that can be used to query the attestation report containing the SHA-256 digest of the guest memory encrypted through the KVM_SEV_LAUNCH_UPDATE_{DATA, VMSA} commands and sign the report with the Platform Endorsement Key (PEK). See the SEV FW API spec section 6.8 for more details. Note there already exist a command (KVM_SEV_LAUNCH_MEASURE) that can be used to get the SHA-256 digest. The main difference between the KVM_SEV_LAUNCH_MEASURE and KVM_SEV_ATTESTATION_REPORT is that the latter can be called while the guest is running and the measurement value is signed with PEK. Cc: James Bottomley <jejb@linux.ibm.com> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: John Allen <john.allen@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Reviewed-by:Tom Lendacky <thomas.lendacky@amd.com> Acked-by:
David Rientjes <rientjes@google.com> Tested-by:
James Bottomley <jejb@linux.ibm.com> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Message-Id: <20210104151749.30248-1-brijesh.singh@amd.com> Signed-off-by:
-
Ben Gardon authored
Disabling dirty logging is much more intestesting from a testing perspective if the vCPUs are still running. This also excercises the code-path in which collapsible SPTEs must be faulted back in at a higher level after disabling dirty logging. To: linux-kselftest@vger.kernel.org CC: Peter Xu <peterx@redhat.com> CC: Andrew Jones <drjones@redhat.com> CC: Thomas Huth <thuth@redhat.com> Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-29-bgardon@google.com> Signed-off-by:
-
Ben Gardon authored
Add a parameter to control the backing memory type for dirty_log_perf_test so that the test can be run with hugepages. To: linux-kselftest@vger.kernel.org CC: Peter Xu <peterx@redhat.com> CC: Andrew Jones <drjones@redhat.com> CC: Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Ben Gardon authored
Add a memslot modification stress test in which a memslot is repeatedly created and removed while vCPUs access memory in another memslot. Most userspaces do not create or remove memslots on running VMs which makes it hard to test races in adding and removing memslots without a dedicated test. Adding and removing a memslot also has the effect of tearing down the entire paging structure, which leads to more page faults and pressure on the page fault handling path than a one-and-done memory population test. Reviewed-by:
Jacob Xu <jacobhxu@google.com> Signed-off-by:
-
Ben Gardon authored
Add an option to overlap the ranges of memory each vCPU accesses instead of partitioning them. This option will increase the probability of multiple vCPUs faulting on the same page at the same time, and causing interesting races, if there are bugs in the page fault handler or elsewhere in the kernel. Reviewed-by:
Makarand Sonare <makarandsonare@google.com> Signed-off-by:
-
Ben Gardon authored
Currently the population stage in the dirty_log_perf_test does nothing as the per-vCPU iteration counters are not initialized and the loop does not wait for each vCPU. Remedy those errors. Reviewed-by:
-
Ben Gardon authored
In order to add an iteration -1 to indicate that the memory population phase has not yet completed, convert the interations counters to ints. No functional change intended. Reviewed-by:
-
Ben Gardon authored
Peter Xu pointed out that a log message printed while waiting for the memory population phase of the dirty_log_perf_test will flood the debug logs as there is no delay after printing the message. Since the message does not provide much value anyway, remove it. Reviewed-by:
-
Ben Gardon authored
In response to some earlier comments from Peter Xu, rename timespec_diff_now to the much more sensible timespec_elapsed. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Remove the update_pte() shadow paging logic, which was obsoleted by commit 4731d4c7 ("KVM: MMU: out of sync shadow core"), but never removed. As pointed out by Yu, KVM never write protects leaf page tables for the purposes of shadow paging, and instead marks their associated shadow page as unsync so that the guest can write PTEs at will. The update_pte() path, which predates the unsync logic, optimizes COW scenarios by refreshing leaf SPTEs when they are written, as opposed to zapping the SPTE, restarting the guest, and installing the new SPTE on the subsequent fault. Since KVM no longer write-protects leaf page tables, update_pte() is unreachable and can be dropped. Reported-by:
Yu Zhang <yu.c.zhang@intel.com> Signed-off-by:
-
Peter Shier authored
When a guest is using xAPIC KVM allocates a backing page for the required EPT entry for the APIC access address set in the VMCS. If mm decides to move that page the KVM mmu notifier will update the VMCS with the new HPA. This test induces a page move to test that APIC access continues to work correctly. It is a directed test for commit e649b3f0 "KVM: x86: Fix APIC page invalidation race". Tested: ran for 1 hour on a skylake, migrating backing page every 1ms Depends on patch "selftests: kvm: Add exception handling to selftests" from aaronlewis@google.com that has not yet been queued. Signed-off-by:
Peter Shier <pshier@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Ricardo Koller <ricarkol@google.com> Message-Id: <20201105223823.850068-1-pshier@google.com> Signed-off-by:
-
Yang Zhong authored
Expose AVX (VEX-encoded) versions of the Vector Neural Network Instructions to guest. The bit definition: CPUID.(EAX=7,ECX=1):EAX[bit 4] AVX_VNNI The following instructions are available when this feature is present in the guest. 1. VPDPBUS: Multiply and Add Unsigned and Signed Bytes 2. VPDPBUSDS: Multiply and Add Unsigned and Signed Bytes with Saturation 3. VPDPWSSD: Multiply and Add Signed Word Integers 4. VPDPWSSDS: Multiply and Add Signed Integers with Saturation This instruction is currently documented in the latest "extensions" manual (ISE). It will appear in the "main" manual (SDM) in the future. Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Reviewed-by:
Tony Luck <tony.luck@intel.com> Message-Id: <20210105004909.42000-3-yang.zhong@intel.com> Signed-off-by:
-
Kyung Min Park authored
Add AVX version of the Vector Neural Network (VNNI) Instructions. A processor supports AVX VNNI instructions if CPUID.0x07.0x1:EAX[4] is present. The following instructions are available when this feature is present. 1. VPDPBUS: Multiply and Add Unsigned and Signed Bytes 2. VPDPBUSDS: Multiply and Add Unsigned and Signed Bytes with Saturation 3. VPDPWSSD: Multiply and Add Signed Word Integers 4. VPDPWSSDS: Multiply and Add Signed Integers with Saturation The only in-kernel usage of this is kvm passthrough. The CPU feature flag is shown as "avx_vnni" in /proc/cpuinfo. This instruction is currently documented in the latest "extensions" manual (ISE). It will appear in the "main" manual (SDM) in the future. Signed-off-by:
Kyung Min Park <kyung.min.park@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
YANG LI authored
Fix the following coccicheck warning: ./arch/x86/kvm/x86.c:8012:5-48: WARNING: Comparison to bool Signed-off-by:
YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Message-Id: <1610357578-66081-1-git-send-email-abaci-bugfix@linux.alibaba.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Walk the list of MMU pages in reverse in kvm_mmu_zap_oldest_mmu_pages(). The list is FIFO, meaning new pages are inserted at the head and thus the oldest pages are at the tail. Using a "forward" iterator causes KVM to zap MMU pages that were just added, which obliterates guest performance once the max number of shadow MMU pages is reached. Fixes: 6b82ef2c ("KVM: x86/mmu: Batch zap MMU pages when recycling oldest pages") Reported-by:
Zdenek Kaspar <zkaspar82@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Return a 'bool' instead of an 'int' for various PTE accessors that are boolean in nature, e.g. is_shadow_present_pte(). Returning an int is goofy and potentially dangerous, e.g. if a flag being checked is moved into the upper 32 bits of a SPTE, then the compiler may silently squash the entire check since casting to an int is guaranteed to yield a return value of '0'. Opportunistically refactor is_last_spte() so that it naturally returns a bool value instead of letting it implicitly cast 0/1 to false/true. No functional change intended. Signed-off-by:
-
Tian Tao authored
fixed the following warning： /virt/kvm/dirty_ring.c:70:20-27: WARNING: vzalloc should be used for ring -> dirty_gfns, instead of vmalloc/memset. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Message-Id: <1611547045-13669-1-git-send-email-tiantao6@hisilicon.com> Signed-off-by:
-
