- 10 Nov, 2016 40 commits
-
-
Ville Syrjälä authored
commit 7dfcb36a upstream. We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 87d3b658 upstream. Since 4.7 kernel, we've seen the error messages like kernel: [TTM] Buffer eviction failed kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001) kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO on QXL when switching and accessing on VT. The culprit was the generic deferred_io code (qxl driver switched to it since 4.7). There is a race between the dirty clip update and the call of callback. In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock, while it kicks off the update worker outside the spinlock. Meanwhile the update worker clears the dirty clip in the spinlock, too. Thus, when drm_fb_helper_dirty() is called concurrently, schedule_work() is called after the clip is cleared in the first worker call. This patch addresses it by validating the clip before calling the dirty fb callback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298 Fixes: eaa434de ('drm/fb-helper: Add fb_deferred_io support') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Peter Wu authored
commit b0a6af8b upstream. Check whether the kernel really supports power resources for a device, otherwise the power might not be removed when the device is runtime suspended (DSM should still work in these cases where PR does not). This is a workaround for a problem where ACPICA and Windows 10 differ in behavior. ACPICA does not correctly enumerate power resources within a conditional block (due to delayed execution of such blocks) and as a result power_resources is set to false even if _PR3 exists. Fixes: 692a17dc ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398Reported-and-tested-by:
Rick Kerkhof <rick.2889@gmail.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Lucas Stach authored
commit 537b4b46 upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 7dc86ef5 upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
-
Tom St Denis authored
commit fb9a5b0c upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Liu Ying authored
commit e73aca51 upstream. Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc ("drm/imx: Add active plane reconfiguration support") Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Liu Ying authored
commit 43daa013 upstream. We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc ("drm/imx: Add active plane reconfiguration support") Signed-off-by:
-
Michel Dänzer authored
commit 9dc79965 upstream. This reverts commit 1a738347. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
NeilBrown authored
commit 1217e1d1 upstream. mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Reported-by:
Viswesh <viswesh.vichu@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
commit 579ed34f upstream. This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler <sitsofe@gmail.com> Signed-off-by:
-
Shaohua Li authored
commit e3f948cd upstream. If a write error occurs, raid1 will try to rewrite the bio in small chunk size. If the rewrite fails, raid1 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Reported-and-tested-by:
Sitsofe Wheeler <sitsofe@gmail.com> Signed-off-by:
-
Jaehoon Chung authored
commit 45c7a490 upstream. platform_get_resource can be returned the NULL pointer. Then regs->start should be referred to NULL Pointer. devm_ioremap_resource() checks whether res is NULL or not. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ching Huang authored
commit 2bf7dc84 upstream. The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
commit 4d2b496f upstream. map_storep was not being vfree()'d in the module_exit call. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Marty Faltesek authored
commit f67b107d upstream. Commit 0b8e3c4c ("ath10k: move cal data len to hw_params") broke retrieving the calibration data from cal_data debugfs file. The length of file was always zero. The reason is: static ssize_t ath10k_debug_cal_data_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { struct ath10k *ar = file->private_data; void *buf = file->private_data; This is obviously bogus, private_data cannot contain both struct ath10k and the buffer. Fix it by caching calibration data to ar->debug.cal_data. This also allows it to be accessed when the device is not active (interface is down). The cal_data buffer is fixed size because during the first firmware probe we don't yet know what will be the lenght of the calibration data. It was simplest just to use a fixed length. There's a WARN_ON() in ath10k_debug_cal_data_fetch() if the buffer is too small. Tested with qca988x and firmware 10.2.4.70.56. Reported-by:
Nikolay Martynov <mar.kolya@gmail.com> Fixes: 0b8e3c4c ("ath10k: move cal data len to hw_params") Signed-off-by:
Marty Faltesek <mfaltesek@google.com> [kvalo@qca.qualcomm.com: improve commit log and minor other changes] Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
commit 304e5ac1 upstream. This reverts commit 171f6402 ("ath9k_hw: implement temperature compensation support for AR9003+"). Some users report that this commit causes a regression in performance under some conditions. Fixes: 171f6402 ("ath9k_hw: implement temperature compensation support for AR9003+") Signed-off-by:
Felix Fietkau <nbd@nbd.name> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by:
-
Johannes Berg authored
commit ea720935 upstream. In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stefan Richter authored
commit e9300a4b upstream. RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
commit 667121ac upstream. The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by:
Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by:
-
Patrick Scheuring authored
commit da25311c upstream. The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jes Sorensen authored
commit ab05e5ec upstream. The generic disable_rf() function clears bits 22 and 23 in REG_RX_WAIT_CCA, however we did not re-enable them again in rtl8723b_enable_rf() This resolves the problem for me with 8723bu devices not working again after reloading the driver. Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jes Sorensen authored
commit 8a55698f upstream. The full RX descriptor is converted so converting tsfl again would return it to it's original endian value. Signed-off-by:
-
Jes Sorensen authored
commit 1e54134c upstream. A device running without RX package aggregation could return more data in the USB packet than the actual network packet. In this case we could would clone the skb but then determine that that there was no packet to handle and exit without freeing the cloned skb first. This has so far only been observed with 8188eu devices, but could affect others. Signed-off-by:
-
Heinz Mauelshagen authored
commit b052b07c upstream. dm-raid 1.9.0 fails to activate existing RAID4/10 devices that have the old superblock format (which does not have takeover/reshaping support that was added via commit 33e53f06). Fix validation path for old superblocks by reverting to the old raid4 layout and basing checks on mddev->new_{level,layout,...} members in super_init_validation(). Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Andy Whitcroft authored
commit 5c33677c upstream. In ecbfb9f1 ("dm raid: add raid level takeover support") a new compatible feature flag was added. Validation for these compat_features was added but this only passes for new raid mappings with this feature flag. This causes previously created raid mappings to be failed at import. Check compat_features for the only valid combination. Fixes: ecbfb9f1 ("dm raid: add raid level takeover support") Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Mike Snitzer authored
commit 937fa62e upstream. cleanup_mapped_device() calls kthread_stop() if kworker_task is non-NULL. Currently the assigned value could be a valid task struct or an error code (e.g -ENOMEM). Reset md->kworker_task to NULL if kthread_run() returned an erorr. Fixes: 7193a9de ("dm rq: check kthread_run return for .request_fn request-based DM") Reported-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
-
tang.junhui authored
commit dafa724b upstream. dm_get_target_type() was previously called so any error returned from dm_table_add_target() must first call dm_put_target_type(). Otherwise the DM target module's reference count will leak and the associated kernel module will be unable to be removed. Also, leverage the fact that r is already -EINVAL and remove an extra newline. Fixes: 36a0456f ("dm table: add immutable feature") Fixes: cc6cbe14 ("dm table: add always writeable feature") Fixes: 3791e2fc ("dm table: add singleton feature") Signed-off-by:
tang.junhui <tang.junhui@zte.com.cn> Signed-off-by:
-
Heinz Mauelshagen authored
commit dcb2ff56 upstream. If a default leg has failed, any read will cause a new operational default leg to be selected and the read is resubmitted. But until now the read will return failure even though it was successful due to resubmission. The reason for this is bio->bi_error was not being cleared before resubmitting the bio. Fix by clearing bio->bi_error before resubmission. Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by:
-
Matt Redfearn authored
commit 34563769 upstream. Commit c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Will Deacon authored
commit a0be1db4 upstream. Legacy virtio defines the virtqueue base using a 32-bit PFN field, with a read-only register indicating a fixed page size of 4k. This can cause problems for DMA allocators that allocate top down from the DMA mask, which is set to 64 bits. In this case, the addresses are silently truncated to 44-bit, leading to IOMMU faults, failure to read from the queue or data corruption. This patch restricts the coherent DMA mask for legacy PCI virtio devices to 44 bits, which matches the specification. Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Benjamin Serebrin <serebrin@google.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ladi Prosek authored
commit 0ea1e4a6 upstream. According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is negotiated the driver MUST set flags to 0. Not dirtying the available ring in virtqueue_disable_cb also has a minor positive performance impact, improving L1 dcache load missed by ~0.5% in vring_bench. Writes to the used event field (vring_used_event) are still unconditional. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
-
John David Anglin authored
commit 6ed51832 upstream. We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Miklos Szeredi authored
commit 641089c1 upstream. Make sure the copied up file hits the disk before renaming to the final destination. If this is not done then the copy-up may corrupt the data in the file in case of a crash. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit fd3220d3 upstream. This change fixes xfstest generic/375, which failed to clear the setgid bit in the following test case on overlayfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Reported-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Miklos Szeredi authored
commit b93d4a0e upstream. tmpfs doesn't have ->get_acl() because it only uses cached acls. This fixes the acl tests in pjdfstest when tmpfs is used as the upper layer of the overlay. Reported-by:
-
Matt Redfearn authored
commit 47366979 upstream. If platform code returns a NULL pointer to the FDT, initial_boot_params will not get set to a valid pointer and attempting to find the /chosen node in it will cause a NULL pointer dereference and the kernel to crash immediately on startup - with no output to the console. Fix this by checking that initial_boot_params is valid before using it. Fixes: 405bc8fd ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Chuck Lever authored
commit f46c445b upstream. When I push NFSv4.1 / RDMA hard, (xfstests generic/089, for example), I get this crash on the server: Oct 28 22:04:30 klimt kernel: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Oct 28 22:04:30 klimt kernel: Modules linked in: cts rpcsec_gss_krb5 iTCO_wdt iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm btrfs irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd xor pcspkr raid6_pq i2c_i801 i2c_smbus lpc_ich mfd_core sg mei_me mei ioatdma shpchp wmi ipmi_si ipmi_msghandler rpcrdma ib_ipoib rdma_ucm acpi_power_meter acpi_pad ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb ahci libahci ptp mlx4_core pps_core dca libata i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod Oct 28 22:04:30 klimt kernel: CPU: 7 PID: 1558 Comm: nfsd Not tainted 4.9.0-rc2-00005-g82cd754 #8 Oct 28 22:04:30 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Oct 28 22:04:30 klimt kernel: task: ffff880835c3a100 task.stack: ffff8808420d8000 Oct 28 22:04:30 klimt kernel: RIP: 0010:[<ffffffffa05a759f>] [<ffffffffa05a759f>] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP: 0018:ffff8808420dbce0 EFLAGS: 00010246 Oct 28 22:04:30 klimt kernel: RAX: ffff88084e6660f0 RBX: ffff88084e667020 RCX: 0000000000000000 Oct 28 22:04:30 klimt kernel: RDX: 0000000000000007 RSI: 0000000000000000 RDI: ffff88084e667020 Oct 28 22:04:30 klimt kernel: RBP: ffff8808420dbcf8 R08: 0000000000000001 R09: 0000000000000000 Oct 28 22:04:30 klimt kernel: R10: ffff880835c3a100 R11: ffff880835c3aca8 R12: 6b6b6b6b6b6b6b6b Oct 28 22:04:30 klimt kernel: R13: ffff88084e6670d8 R14: ffff880835f546f0 R15: ffff880835f1c548 Oct 28 22:04:30 klimt kernel: FS: 0000000000000000(0000) GS:ffff88087bdc0000(0000) knlGS:0000000000000000 Oct 28 22:04:30 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 28 22:04:30 klimt kernel: CR2: 00007ff020389000 CR3: 0000000001c06000 CR4: 00000000001406e0 Oct 28 22:04:30 klimt kernel: Stack: Oct 28 22:04:30 klimt kernel: ffff88084e667020 0000000000000000 ffff88084e6670d8 ffff8808420dbd20 Oct 28 22:04:30 klimt kernel: ffffffffa05ac80d ffff880835f54548 ffff88084e640008 ffff880835f545b0 Oct 28 22:04:30 klimt kernel: ffff8808420dbd70 ffffffffa059803d ffff880835f1c768 0000000000000870 Oct 28 22:04:30 klimt kernel: Call Trace: Oct 28 22:04:30 klimt kernel: [<ffffffffa05ac80d>] nfsd4_free_stateid+0xfd/0x1b0 [nfsd] Oct 28 22:04:30 klimt kernel: [<ffffffffa059803d>] nfsd4_proc_compound+0x40d/0x690 [nfsd] Oct 28 22:04:30 klimt kernel: [<ffffffffa0583114>] nfsd_dispatch+0xd4/0x1d0 [nfsd] Oct 28 22:04:30 klimt kernel: [<ffffffffa047bbf9>] svc_process_common+0x3d9/0x700 [sunrpc] Oct 28 22:04:30 klimt kernel: [<ffffffffa047ca64>] svc_process+0xf4/0x330 [sunrpc] Oct 28 22:04:30 klimt kernel: [<ffffffffa05827ca>] nfsd+0xfa/0x160 [nfsd] Oct 28 22:04:30 klimt kernel: [<ffffffffa05826d0>] ? nfsd_destroy+0x170/0x170 [nfsd] Oct 28 22:04:30 klimt kernel: [<ffffffff810b367b>] kthread+0x10b/0x120 Oct 28 22:04:30 klimt kernel: [<ffffffff810b3570>] ? kthread_stop+0x280/0x280 Oct 28 22:04:30 klimt kernel: [<ffffffff8174e8ba>] ret_from_fork+0x2a/0x40 Oct 28 22:04:30 klimt kernel: Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 8b 87 b0 00 00 00 48 89 fb 4c 8b a0 98 00 00 00 <49> 8b 44 24 20 48 8d b8 80 03 00 00 e8 10 66 1a e1 48 89 df e8 Oct 28 22:04:30 klimt kernel: RIP [<ffffffffa05a759f>] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP <ffff8808420dbce0> Oct 28 22:04:30 klimt kernel: ---[ end trace cf5d0b371973e167 ]--- Jeff Layton says: > Hm...now that I look though, this is a little suspicious: > > struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); > > I wonder if it's possible for the openstateid to have already been > destroyed at this point. > > We might be better off doing something like this to get the client pointer: > > stp->st_stid.sc_client; > > ...which should be more direct and less dependent on other stateids > staying valid. With the suggested change, I am no longer able to reproduce the above oops. v2: Fix unhash_lock_stateid() as well Fix-suggested-by:
Jeff Layton <jlayton@redhat.com> Fixes: 42691398 ('nfsd: Fix race between FREE_STATEID and LOCK') Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Linus Walleij authored
commit 1b283eea upstream. This fixes a very annoying regression on the Snowball SD card that has been around for a while. It turns out that the device tree does not configure the direction pins properly, nor sets up the pins for the voltage converter properly at boot. Unless all things are correctly set up, the feedback clock will not work, and makes the driver spew messages in the console (but it works, very slowly): root@Ux500:/ mount /dev/mmcblk0p2 /mnt/ [ 9.953460] mmci-pl18x 80126000.sdi0_per1: error during DMA transfer! [ 9.960296] mmcblk0: error -110 sending status command, retrying [ 9.966461] mmcblk0: error -110 sending status command, retrying [ 9.972534] mmcblk0: error -110 sending status command, aborting Fix this by rectifying the device tree to correspond to that of the Ux500 HREF boards plus the DAT31DIR setting that is unique for the Snowball, and things start working smoothly. Add in the SDR12 and SDR25 modes which this host can do without any problems. I don't know if this has ever been correct, sadly. It works after this patch. Reported-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Gregory CLEMENT authored
commit 33c45ef8 upstream. Since the commit bd3677ff ("clk: mvebu: Remove corediv clock from Armada XP"), the corediv clk is no more selected for Armada XP, however this clock is used for Armada XP using the compatible armada-370-corediv-clock. While since commit 1594d568 ("clk: mvebu: Move corediv config to mvebu config") Armada 38x and Armada 375 got corediv support again, not only Armada XP was missed but also Armada 39x. Actually all the SoC selecting MVEBU_V7 config need this clock: git grep "\-corediv-clock" arch/arm/boot/dts arch/arm/boot/dts/armada-370-xp.dtsi: compatible = "marvell,armada-370-corediv-clock"; arch/arm/boot/dts/armada-375.dtsi: compatible = "marvell,armada-375-corediv-clock"; arch/arm/boot/dts/armada-38x.dtsi: compatible = "marvell,armada-380-corediv-clock"; arch/arm/boot/dts/armada-39x.dtsi: compatible = "marvell,armada-390-corediv-clock" This commit now fixes this behavior by letting MVEBU_V7 select MVEBU_CLK_COREDIV. Fixes: bd3677ff ("clk: mvebu: Remove corediv clock from Armada XP") Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
