- 10 Apr, 2015 25 commits
-
-
D.S. Ljungmark authored
commit 6fd99094 upstream. A local route may have a lower hop_limit set than global routes do. RFC 3756, Section 4.2.7, "Parameter Spoofing" > 1. The attacker includes a Current Hop Limit of one or another small > number which the attacker knows will cause legitimate packets to > be dropped before they reach their destination. > As an example, one possible approach to mitigate this threat is to > ignore very small hop limits. The nodes could implement a > configurable minimum hop limit, and ignore attempts to set it below > said limit. Signed-off-by:
D.S. Ljungmark <ljungmark@modio.se> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Tejun Heo authored
commit c72efb65 upstream. From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 23 Mar 2015 00:08:19 -0400 2f800fbd ("writeback: fix dirtied pages accounting on redirty") introduced account_page_redirty() which reverts stat updates for a redirtied page, making BDI_DIRTIED no longer monotonically increasing. bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the basis for bandwidth calculation. While unlikely, since the above patch, the newer value may be lower than the recorded past value and nunderflow the bandwidth calculation leading to a wild result. Fix it by subtracing min of the old and new values when calculating delta. AFAIK, there hasn't been any report of it happening but the resulting erratic behavior would be non-critical and temporary, so it's possible that the issue is happening without being reported. The risk of the fix is very low, so tagged for -stable. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Fixes: 2f800fbd ("writeback: fix dirtied pages accounting on redirty") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Vineet Gupta authored
commit 6914e1e3 upstream. The regfile provided to SA_SIGINFO signal handler as ucontext was off by one due to pt_regs gutter cleanups in 2013. Before handling signal, user pt_regs are copied onto user_regs_struct and copied back later. Both structs are binary compatible. This was all fine until commit 2fa91904 (ARC: pt_regs update #2) which removed the empty stack slot at top of pt_regs (corresponding to first pad) and made the corresponding fixup in struct user_regs_struct (the pad in there was moved out of @scratch - not removed altogether as it is part of ptrace ABI) struct user_regs_struct { + long pad; struct { - long pad; long bta, lp_start, lp_end,.... } scratch; ... } This meant that now user_regs_struct was off by 1 reg w.r.t pt_regs and signal code needs to user_regs_struct.scratch to reflect it as pt_regs, which is what this commit does. This problem was hidden for 2 years, because both save/restore, despite using wrong location, were using the same location. Only an interim inspection (reproducer below) exposed the issue. void handle_segv(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); printf("regs %x %x\n", <=== prints 7 8 (vs. 8 9) regs->scratch.r8, regs->scratch.r9); } int main() { struct sigaction sa; sa.sa_sigaction = handle_segv; sa.sa_flags = SA_SIGINFO; sigemptyset(&sa.sa_mask); sigaction(SIGSEGV, &sa, NULL); asm volatile( "mov r7, 7 \n" "mov r8, 8 \n" "mov r9, 9 \n" "mov r10, 10 \n" :::"r7","r8","r9","r10"); *((unsigned int*)0x10) = 0; } Fixes: 2fa91904 "ARC: pt_regs update #2: Remove unused gutter at start of pt_regs" Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sergei Antonov authored
commit 98cf21c6 upstream. Fix B-tree corruption when a new record is inserted at position 0 in the node in hfs_brec_insert(). In this case a hfs_brec_update_parent() is called to update the parent index node (if exists) and it is passed hfs_find_data with a search_key containing a newly inserted key instead of the key to be updated. This results in an inconsistent index node. The bug reproduces on my machine after an extents overflow record for the catalog file (CNID=4) is inserted into the extents overflow B-tree. Because of a low (reserved) value of CNID=4, it has to become the first record in the first leaf node. The resulting first leaf node is correct: ---------------------------------------------------- | key0.CNID=4 | key1.CNID=123 | key2.CNID=456, ... | ---------------------------------------------------- But the parent index key0 still contains the previous key CNID=123: ----------------------- | key0.CNID=123 | ... | ----------------------- A change in hfs_brec_insert() makes hfs_brec_update_parent() work correctly by preventing it from getting fd->record=-1 value from __hfs_brec_find(). Along the way, I removed duplicate code with unification of the if condition. The resulting code is equivalent to the original code because node is never 0. Also hfs_brec_update_parent() will now return an error after getting a negative fd->record value. However, the return value of hfs_brec_update_parent() is not checked anywhere in the file and I'm leaving it unchanged by this patch. brec.c lacks error checking after some other calls too, but this issue is of less importance than the one being fixed by this patch. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Cc: Joe Perches <joe@perches.com> Reviewed-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Anton Altaparmakov <aia21@cam.ac.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Gu Zheng authored
commit b0dc3a34 upstream. Qiu Xishi reported the following BUG when testing hot-add/hot-remove node under stress condition: BUG: unable to handle kernel paging request at 0000000000025f60 IP: next_online_pgdat+0x1/0x50 PGD 0 Oops: 0000 [#1] SMP ACPI: Device does not support D3cold Modules linked in: fuse nls_iso8859_1 nls_cp437 vfat fat loop dm_mod coretemp mperf crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 pcspkr microcode igb dca i2c_algo_bit ipv6 megaraid_sas iTCO_wdt i2c_i801 i2c_core iTCO_vendor_support tg3 sg hwmon ptp lpc_ich pps_core mfd_core acpi_pad rtc_cmos button ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh ahci libahci libata scsi_mod [last unloaded: rasf] CPU: 23 PID: 238 Comm: kworker/23:1 Tainted: G O 3.10.15-5885-euler0302 #1 Hardware name: HUAWEI TECHNOLOGIES CO.,LTD. Huawei N1/Huawei N1, BIOS V100R001 03/02/2015 Workqueue: events vmstat_update task: ffffa800d32c0000 ti: ffffa800d32ae000 task.ti: ffffa800d32ae000 RIP: 0010: next_online_pgdat+0x1/0x50 RSP: 0018:ffffa800d32afce8 EFLAGS: 00010286 RAX: 0000000000001440 RBX: ffffffff81da53b8 RCX: 0000000000000082 RDX: 0000000000000000 RSI: 0000000000000082 RDI: 0000000000000000 RBP: ffffa800d32afd28 R08: ffffffff81c93bfc R09: ffffffff81cbdc96 R10: 00000000000040ec R11: 00000000000000a0 R12: ffffa800fffb3440 R13: ffffa800d32afd38 R14: 0000000000000017 R15: ffffa800e6616800 FS: 0000000000000000(0000) GS:ffffa800e6600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000025f60 CR3: 0000000001a0b000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: refresh_cpu_vm_stats+0xd0/0x140 vmstat_update+0x11/0x50 process_one_work+0x194/0x3d0 worker_thread+0x12b/0x410 kthread+0xc6/0xd0 ret_from_fork+0x7c/0xb0 The cause is the "memset(pgdat, 0, sizeof(*pgdat))" at the end of try_offline_node, which will reset all the content of pgdat to 0, as the pgdat is accessed lock-free, so that the users still using the pgdat will panic, such as the vmstat_update routine. process A: offline node XX: vmstat_updat() refresh_cpu_vm_stats() for_each_populated_zone() find online node XX cond_resched() offline cpu and memory, then try_offline_node() node_set_offline(nid), and memset(pgdat, 0, sizeof(*pgdat)) zone = next_zone(zone) pg_data_t *pgdat = zone->zone_pgdat; // here pgdat is NULL now next_online_pgdat(pgdat) next_online_node(pgdat->node_id); // NULL pointer access So the solution here is postponing the reset of obsolete pgdat from try_offline_node() to hotadd_new_pgdat(), and just resetting pgdat->nr_zones and pgdat->classzone_idx to be 0 rather than the memset 0 to avoid breaking pointer information in pgdat. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by:
Xishi Qiu <qiuxishi@huawei.com> Suggested-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by:
-
Leon Yu authored
commit 3fe89b3e upstream. I have constantly stumbled upon "kernel BUG at mm/rmap.c:399!" after upgrading to 3.19 and had no luck with 4.0-rc1 neither. So, after looking into new logic introduced by commit 7a3ef208 ("mm: prevent endless growth of anon_vma hierarchy"), I found chances are that unlink_anon_vmas() is called without incrementing dst->anon_vma->degree in anon_vma_clone() due to allocation failure. If dst->anon_vma is not NULL in error path, its degree will be incorrectly decremented in unlink_anon_vmas() and eventually underflow when exiting as a result of another call to unlink_anon_vmas(). That's how "kernel BUG at mm/rmap.c:399!" is triggered for me. This patch fixes the underflow by dropping dst->anon_vma when allocation fails. It's safe to do so regardless of original value of dst->anon_vma because dst->anon_vma doesn't have valid meaning if anon_vma_clone() fails. Besides, callers don't care dst->anon_vma in such case neither. Also suggested by Michal Hocko, we can clean up vma_adjust() a bit as anon_vma_clone() now does the work. [akpm@linux-foundation.org: tweak comment] Fixes: 7a3ef208 ("mm: prevent endless growth of anon_vma hierarchy") Signed-off-by:
Leon Yu <chianglungyu@gmail.com> Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Joe Perches authored
commit 6436a123 upstream. Return a negative error value like the rest of the entries in this function. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> [PM: tweaked subject line] Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Catalin Marinas authored
commit e53f21bc upstream. The idle_task_exit() function may call switch_mm() with next == &init_mm. On arm64, init_mm.pgd cannot be used for user mappings, so this patch simply sets the reserved TTBR0. Reported-by:
Jon Medhurst (Tixy) <tixy@linaro.org> Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Sebastian Wicki authored
commit 80b311d3 upstream. This model uses the same dock port as the previous generation. Signed-off-by:
Sebastian Wicki <gandro@gmx.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Brian Silverman authored
commit 746db944 upstream. When non-realtime tasks get priority-inheritance boosted to a realtime scheduling class, RLIMIT_RTTIME starts to apply to them. However, the counter used for checking this (the same one used for SCHED_RR timeslices) was not getting reset. This meant that tasks running with a non-realtime scheduling class which are repeatedly boosted to a realtime one, but never block while they are running realtime, eventually hit the timeout without ever running for a time over the limit. This patch resets the realtime timeslice counter when un-PI-boosting from an RT to a non-RT scheduling class. I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT mutex which induces priority boosting and spins while boosted that gets killed by a SIGXCPU on non-fixed kernels but doesn't with this patch applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and does happen eventually with PREEMPT_VOLUNTARY kernels. Signed-off-by:
Brian Silverman <brian@peloton-tech.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: austin@peloton-tech.com Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit d525211f upstream. Vince reported a watchdog lockup like: [<ffffffff8115e114>] perf_tp_event+0xc4/0x210 [<ffffffff810b4f8a>] perf_trace_lock+0x12a/0x160 [<ffffffff810b7f10>] lock_release+0x130/0x260 [<ffffffff816c7474>] _raw_spin_unlock_irqrestore+0x24/0x40 [<ffffffff8107bb4d>] do_send_sig_info+0x5d/0x80 [<ffffffff811f69df>] send_sigio_to_task+0x12f/0x1a0 [<ffffffff811f71ce>] send_sigio+0xae/0x100 [<ffffffff811f72b7>] kill_fasync+0x97/0xf0 [<ffffffff8115d0b4>] perf_event_wakeup+0xd4/0xf0 [<ffffffff8115d103>] perf_pending_event+0x33/0x60 [<ffffffff8114e3fc>] irq_work_run_list+0x4c/0x80 [<ffffffff8114e448>] irq_work_run+0x18/0x40 [<ffffffff810196af>] smp_trace_irq_work_interrupt+0x3f/0xc0 [<ffffffff816c99bd>] trace_irq_work_interrupt+0x6d/0x80 Which is caused by an irq_work generating new irq_work and therefore not allowing forward progress. This happens because processing the perf irq_work triggers another perf event (tracepoint stuff) which in turn generates an irq_work ad infinitum. Avoid this by raising the recursion counter in the irq_work -- which effectively disables all software events (including tracepoints) from actually triggering again. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
-
Mahesh Salgaonkar authored
commit 44d5f6f5 upstream. commit id 2ba9f0d8 has changed CONFIG_KVM_BOOK3S_64_HV to tristate to allow HV/PR bits to be built as modules. But the MCE code still depends on CONFIG_KVM_BOOK3S_64_HV which is wrong. When user selects CONFIG_KVM_BOOK3S_64_HV=m to build HV/PR bits as a separate module the relevant MCE code gets excluded. This patch fixes the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLER. This makes sure that the relevant MCE code is included when HV/PR bits are built as a separate modules. Fixes: 2ba9f0d8 ("kvm: powerpc: book3s: Support building HV and PR KVM as module") Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Markos Chandras authored
commit 87f966d9 upstream. On a MIPS Malta board, tons of fifo underflow errors have been observed when using u-boot as bootloader instead of YAMON. The reason for that is that YAMON used to set the pcnet device to SRAM mode but u-boot does not. As a result, the default Tx threshold (64 bytes) is now too small to keep the fifo relatively used and it can result to Tx fifo underflow errors. As a result of which, it's best to setup the SRAM on supported controllers so we can always use the NOUFLO bit. Cc: <netdev@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Cc: Don Fry <pcnet32@frontier.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
-
Wenbo Wang authored
commit 7ee8e4f3 upstream. Use the right array index to reference the last element of rq->biotail->bi_io_vec[] Signed-off-by:
Wenbo Wang <wenbo.wang@memblaze.com> Reviewed-by:
Chong Yuan <chong.yuan@memblaze.com> Fixes: 66cb45aa ("block: add support for limiting gaps in SG lists") Signed-off-by:
-
Tyrel Datwyler authored
commit f6ff0414 upstream. We currently use the device tree update code in the kernel after resuming from a suspend operation to re-sync the kernels view of the device tree with that of the hypervisor. The code as it stands is not endian safe as it relies on parsing buffers returned by RTAS calls that thusly contains data in big endian format. This patch annotates variables and structure members with __be types as well as performing necessary byte swaps to cpu endian for data that needs to be parsed. Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Philipp Zabel authored
commit c6b570d9 upstream. This patch fixes a NULL pointer dereference when enabling regmap event tracing in the presence of a syscon regmap, introduced by commit bdb0066d ("mfd: syscon: Decouple syscon interface from platform devices"). That patch introduced syscon regmaps that have their dev field set to NULL. The regmap trace events expect it to point to a valid struct device and feed it to dev_name(): $ echo 1 > /sys/kernel/debug/tracing/events/regmap/enable Unable to handle kernel NULL pointer dereference at virtual address 0000002c pgd = 80004000 [0000002c] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: coda videobuf2_vmalloc CPU: 0 PID: 304 Comm: kworker/0:2 Not tainted 4.0.0-rc2+ #9197 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events_freezable thermal_zone_device_check task: 9f25a200 ti: 9f1ee000 task.ti: 9f1ee000 PC is at ftrace_raw_event_regmap_block+0x3c/0xe4 LR is at _regmap_raw_read+0x1bc/0x1cc pc : [<803636e8>] lr : [<80365f2c>] psr: 600f0093 sp : 9f1efd78 ip : 9f1efdb8 fp : 9f1efdb4 r10: 00000004 r9 : 00000001 r8 : 00000001 r7 : 00000180 r6 : 00000000 r5 : 9f00e3c0 r4 : 00000003 r3 : 00000001 r2 : 00000180 r1 : 00000000 r0 : 9f00e3c0 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 2d91004a DAC: 00000015 Process kworker/0:2 (pid: 304, stack limit = 0x9f1ee210) Stack: (0x9f1efd78 to 0x9f1f0000) fd60: 9f1efda4 9f1efd88 fd80: 800708c0 805f9510 80927140 800f0013 9f1fc800 9eb2f490 00000000 00000180 fda0: 808e3840 00000001 9f1efdfc 9f1efdb8 80365f2c 803636b8 805f8958 800708e0 fdc0: a00f0013 803636ac 9f16de00 00000180 80927140 9f1fc800 9f1fc800 9f1efe6c fde0: 9f1efe6c 9f732400 00000000 00000000 9f1efe1c 9f1efe00 80365f70 80365d7c fe00: 80365f3c 9f1fc800 9f1fc800 00000180 9f1efe44 9f1efe20 803656a4 80365f48 fe20: 9f1fc800 00000180 9f1efe6c 9f1efe6c 9f732400 00000000 9f1efe64 9f1efe48 fe40: 803657bc 80365634 00000001 9e95f910 9f1fc800 9f1efeb4 9f1efe8c 9f1efe68 fe60: 80452ac0 80365778 9f1efe8c 9f1efe78 9e93d400 9e93d5e8 9f1efeb4 9f72ef40 fe80: 9f1efeac 9f1efe90 8044e11c 80452998 8045298c 9e93d608 9e93d400 808e1978 fea0: 9f1efecc 9f1efeb0 8044fd14 8044e0d0 ffffffff 9f25a200 9e93d608 9e481380 fec0: 9f1efedc 9f1efed0 8044fde8 8044fcec 9f1eff1c 9f1efee0 80038d50 8044fdd8 fee0: 9f1ee020 9f72ef40 9e481398 00000000 00000008 9f72ef54 9f1ee020 9f72ef40 ff00: 9e481398 9e481380 00000008 9f72ef40 9f1eff5c 9f1eff20 80039754 80038bfc ff20: 00000000 9e481380 80894100 808e1662 00000000 9e4f2ec0 00000000 9e481380 ff40: 800396f8 00000000 00000000 00000000 9f1effac 9f1eff60 8003e020 80039704 ff60: ffffffff 00000000 ffffffff 9e481380 00000000 00000000 9f1eff78 9f1eff78 ff80: 00000000 00000000 9f1eff88 9f1eff88 9e4f2ec0 8003df30 00000000 00000000 ffa0: 00000000 9f1effb0 8000eb60 8003df3c 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff Backtrace: [<803636ac>] (ftrace_raw_event_regmap_block) from [<80365f2c>] (_regmap_raw_read+0x1bc/0x1cc) r9:00000001 r8:808e3840 r7:00000180 r6:00000000 r5:9eb2f490 r4:9f1fc800 [<80365d70>] (_regmap_raw_read) from [<80365f70>] (_regmap_bus_read+0x34/0x6c) r10:00000000 r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:9f1fc800 r4:9f1fc800 [<80365f3c>] (_regmap_bus_read) from [<803656a4>] (_regmap_read+0x7c/0x144) r6:00000180 r5:9f1fc800 r4:9f1fc800 r3:80365f3c [<80365628>] (_regmap_read) from [<803657bc>] (regmap_read+0x50/0x70) r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:00000180 r4:9f1fc800 [<8036576c>] (regmap_read) from [<80452ac0>] (imx_get_temp+0x134/0x1a4) r6:9f1efeb4 r5:9f1fc800 r4:9e95f910 r3:00000001 [<8045298c>] (imx_get_temp) from [<8044e11c>] (thermal_zone_get_temp+0x58/0x74) r7:9f72ef40 r6:9f1efeb4 r5:9e93d5e8 r4:9e93d400 [<8044e0c4>] (thermal_zone_get_temp) from [<8044fd14>] (thermal_zone_device_update+0x34/0xec) r6:808e1978 r5:9e93d400 r4:9e93d608 r3:8045298c [<8044fce0>] (thermal_zone_device_update) from [<8044fde8>] (thermal_zone_device_check+0x1c/0x20) r5:9e481380 r4:9e93d608 [<8044fdcc>] (thermal_zone_device_check) from [<80038d50>] (process_one_work+0x160/0x3d4) [<80038bf0>] (process_one_work) from [<80039754>] (worker_thread+0x5c/0x4f4) r10:9f72ef40 r9:00000008 r8:9e481380 r7:9e481398 r6:9f72ef40 r5:9f1ee020 r4:9f72ef54 [<800396f8>] (worker_thread) from [<8003e020>] (kthread+0xf0/0x108) r10:00000000 r9:00000000 r8:00000000 r7:800396f8 r6:9e481380 r5:00000000 r4:9e4f2ec0 [<8003df30>] (kthread) from [<8000eb60>] (ret_from_fork+0x14/0x34) r7:00000000 r6:00000000 r5:8003df30 r4:9e4f2ec0 Code: e3140040 1a00001a e3140020 1a000016 (e596002c) ---[ end trace 193c15c2494ec960 ]--- Fixes: bdb0066d (mfd: syscon: Decouple syscon interface from platform devices) Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
commit 391949b6 upstream. With spidev the mesg->complete callback points to spidev_complete. Calling this unblocks spidev_sync and so spidev_sync_write finishes. As the struct spi_message just read is a local variable in spidev_sync_write and recording the trace event accesses this message the recording is better done first. The same can happen for spidev_sync_read. This fixes an oops observed on a 3.14-rt system with spidev activity after echo 1 > /sys/kernel/debug/tracing/events/spi/enable . Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Radim Krčmář authored
commit 0790ec17 upstream. If EPT was enabled, unrestricted_guest was allowed in L1 regardless of L0. L1 triple faulted when running L2 guest that required emulation. Another side effect was 'WARN_ON_ONCE(vmx->nested.nested_run_pending)' in L0's dmesg: WARNING: CPU: 0 PID: 0 at arch/x86/kvm/vmx.c:9190 nested_vmx_vmexit+0x96e/0xb00 [kvm_intel] () Prevent this scenario by masking SECONDARY_EXEC_UNRESTRICTED_GUEST when the host doesn't have it enabled. Fixes: 78051e3b ("KVM: nVMX: Disable unrestricted mode if ept=0") Tested-By:
Kashyap Chamarthy <kchamart@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> [ luis: backported to 3.16: - use nested_vmx_secondary_ctls_high instead of vmx->nested.nested_vmx_secondary_ctls_high ] Signed-off-by:
-
Ameya Palande authored
commit c8648508 upstream. On success, callback function returns 0. So invert the if condition check so that we can break out of loop. Signed-off-by:
Ameya Palande <2ameya@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Ivan T. Ivanov authored
commit 12cb89e3 upstream. num-cs is 32 bit property, don't read just upper 16 bits. Fixes: 4a8573ab (spi: qup: Remove chip select function) Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by:
-
Sudip Mukherjee authored
commit ff6b8090 upstream. we have already allocated memory for nbd_dev, but we were not releasing that memory and just returning the error value. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Acked-by:
Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Tejun Heo authored
commit 7d70e154 upstream. global_update_bandwidth() uses static variable update_time as the timestamp for the last update but forgets to initialize it to INITIALIZE_JIFFIES. This means that global_dirty_limit will be 5 mins into the future on 32bit and some large amount jiffies into the past on 64bit. This isn't critical as the only effect is that global_dirty_limit won't be updated for the first 5 mins after booting on 32bit machines, especially given the auxiliary nature of global_dirty_limit's role - protecting against global dirty threshold's sudden dips; however, it does lead to unintended suboptimal behavior. Fix it. Fixes: c42843f2 ("writeback: introduce smoothed global dirty limit") Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Chen-Yu Tsai authored
commit fdc0074c upstream. As the sunxi usb clocks all contain a reset controller, it is not possible to build the sunxi clock driver without RESET_CONTROLLER enabled. Doing so results in an undefined symbol error: drivers/built-in.o: In function `sunxi_gates_clk_setup': linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to `reset_controller_register' This is possible if building a minimal kernel without PHY_SUN4I_USB. The dependency issue is made visible at compile time instead of link time by the new A80 mmc clocks, which also use a reset control itself. This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER. Fixes: 559482d1 ARM: sunxi: Split the various SoCs support in Kconfig Reported-by:
Lourens Rozema <ik@lourensrozema.nl> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> [ luis: backported to 3.16: - dropped changes to sun8i and sun9i, unsupported on 3.16 kernel ] Signed-off-by:
-
David Sterba authored
commit 9c4f61f0 upstream. We can search and add the orphan item in one go, btrfs_insert_orphan_item will find out if the item already exists. Signed-off-by:
David Sterba <dsterba@suse.cz> Cc: Chris Mason <clm@fb.com> Signed-off-by:
-
Rodrigo Vivi authored
commit 0dc6f20b upstream. When reviewing patch that fixes VGA on BDW Halo Jani noticed that we also had other ULT IDs that weren't listed there. So this follow-up patch add these pci-ids as halo and fix comments on i915_pciids.h Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
- 01 Apr, 2015 1 commit
-
-
Peter Hurley authored
commit 7fd6f640 upstream. Trying to write console output from within the serial console driver while the port->lock is held causes recursive deadlock: CPU 0 spin_lock_irqsave(&port->lock) printk() console_unlock() call_console_drivers() serial8250_console_write() spin_lock_irqsave(&port->lock) ** DEADLOCK ** The 8250_dw i/o accessors try to write a console error message if the LCR workaround was unsuccessful. When the port->lock is already held (eg., when called from serial8250_set_termios()), this deadlocks. Make the error message a FIXME until a general solution is devised. Cc: Tim Kryger <tim.kryger@gmail.com> Reported-by:
Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ luis: backported to 3.16: - dropped changes to dw8250_serial_outq() ] Signed-off-by:
-
- 31 Mar, 2015 1 commit
-
-
Hui Wang authored
commit af95b414 upstream. We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. BugLink: https://bugs.launchpad.net/bugs/1436745Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
- 30 Mar, 2015 13 commits
-
-
Preeti U Murthy authored
commit a127d2bc upstream. The hrtimer mode of broadcast queues hrtimers in the idle entry path so as to wakeup cpus in deep idle states. The associated call graph is : cpuidle_idle_call() |____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....)) |_____tick_broadcast_set_event() |____clockevents_program_event() |____bc_set_next() The hrtimer_{start/cancel} functions call into tracing which uses RCU. But it is not legal to call into RCU in cpuidle because it is one of the quiescent states. Hence protect this region with RCU_NONIDLE which informs RCU that the cpu is momentarily non-idle. As an aside it is helpful to point out that the clock event device that is programmed here is not a per-cpu clock device; it is a pseudo clock device, used by the broadcast framework alone. The per-cpu clock device programming never goes through bc_set_next(). Signed-off-by:
Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: linuxppc-dev@ozlabs.org Cc: mpe@ellerman.id.au Cc: tglx@linutronix.de Link: http://lkml.kernel.org/r/20150318104705.17763.56668.stgit@preeti.in.ibm.comSigned-off-by:
-
Eli Cohen authored
commit 377b5134 upstream. Clear the reserved field of struct ib_uverbs_async_event_desc which is copied to user space. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Scott Wood authored
commit bb344ca5 upstream. Commit 746c9e9f "of/base: Fix PowerPC address parsing hack" limited the applicability of the workaround whereby a missing ranges is treated as an empty ranges. This workaround was hiding a bug in the etsec2 device tree nodes, which have children with reg, but did not have ranges. Signed-off-by:
Scott Wood <scottwood@freescale.com> Reported-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Nishanth Aravamudan authored
commit 4ad04e59 upstream. After d905c5df ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by:
-
Michael Ellerman authored
commit 875ebe94 upstream. Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96 "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Quentin Casasnovas authored
commit f84598bd upstream. mc_saved_tmp is a static array allocated on the stack, we need to make sure mc_saved_count stays within its bounds, otherwise we're overflowing the stack in _save_mc(). A specially crafted microcode header could lead to a kernel crash or potentially kernel execution. Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Filipe Manana authored
commit 5f5bc6b1 upstream. Replacing a xattr consists of doing a lookup for its existing value, delete the current value from the respective leaf, release the search path and then finally insert the new value. This leaves a time window where readers (getxattr, listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs, so this has security implications. This change also fixes 2 other existing issues which were: *) Deleting the old xattr value without verifying first if the new xattr will fit in the existing leaf item (in case multiple xattrs are packed in the same item due to name hash collision); *) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't exist but we have have an existing item that packs muliple xattrs with the same name hash as the input xattr. In this case we should return ENOSPC. A test case for xfstests follows soon. Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace implementation. Reported-by:
Alexandre Oliva <oliva@gnu.org> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Malcolm Priestley authored
commit 163fe301 upstream. When the driver sets this rate a power of zero value is set causing data flow stoppage until another rate is tried. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
huaibin Wang authored
commit ac37e251 upstream. dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee619("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Andy Shevchenko authored
commit a104a45b upstream. The commit 9cade1a4 (dma: dw: split driver to library part and platform code) introduced a separate platform driver but missed to add a MODULE_ALIAS("platform:dw_dmac"); to that module. The patch adds this to get driver loaded automatically if platform device is registered. Reported-by:
"Blin, Jerome" <jerome.blin@intel.com> Fixes: 9cade1a4 (dma: dw: split driver to library part and platform code) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Majd Dibbiny authored
commit 61a3855b upstream. For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of overflow, according to the IB spec, we have to saturate a counter to its max value, do that. Fixes: c3779134 ('IB/mlx4: Support PMA counters for IBoE') Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Suzuki K. Poulose authored
commit 7132813c upstream. Current implementation doesn't zero out the pages allocated. Honor the __GFP_ZERO flag and zero out if set. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 5f7da044 upstream. This patch fixes a NULL pointer dereference triggered by a late target_configure_device() -> alloc_workqueue() failure that results in target_free_device() being called with DF_CONFIGURED already set, which subsequently OOPses in destroy_workqueue() code. Currently this only happens at modprobe target_core_mod time when core_dev_setup_virtual_lun0() -> target_configure_device() fails, and the explicit target_free_device() gets called. To address this bug originally introduced by commit 0fd97ccf, go ahead and move DF_CONFIGURED to end of target_configure_device() code to handle this special failure case. Reported-by:
Claudio Fleiner <cmf@daterainc.com> Cc: Claudio Fleiner <cmf@daterainc.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
