- 04 May, 2016 40 commits
-
-
Kinglong Mee authored
commit aa66b0bb upstream. When starting up linux with btrfs filesystem, I got many memory leak messages by kmemleak as, unreferenced object 0xffff880066882000 (size 4096): comm "modprobe", pid 730, jiffies 4294690024 (age 196.599s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d09aa>] kmem_cache_alloc_trace+0xea/0x1e0 [<ffffffffa03620fb>] btrfs_alloc_dummy_fs_info+0x6b/0x2a0 [btrfs] [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs] [<ffffffffa0360aa9>] btrfs_test_free_space_cache+0x39/0xed0 [btrfs] [<ffffffffa03b5a74>] trace_raw_output_xfs_attr_class+0x54/0xe0 [xfs] [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0 [<ffffffff811765aa>] do_init_module+0x5e/0x1e9 [<ffffffff810fec09>] load_module+0x20a9/0x2690 [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0 [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800573f8000 (size 10256): comm "modprobe", pid 730, jiffies 4294690185 (age 196.460s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119ca6e>] kmalloc_order+0x5e/0x70 [<ffffffff8119caa4>] kmalloc_order_trace+0x24/0x90 [<ffffffffa03620b3>] btrfs_alloc_dummy_fs_info+0x23/0x2a0 [btrfs] [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs] [<ffffffffa036603d>] run_test+0xfd/0x320 [btrfs] [<ffffffffa0366f34>] btrfs_test_free_space_tree+0x94/0xee [btrfs] [<ffffffffa03b5aab>] trace_raw_output_xfs_attr_class+0x8b/0xe0 [xfs] [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0 [<ffffffff811765aa>] do_init_module+0x5e/0x1e9 [<ffffffff810fec09>] load_module+0x20a9/0x2690 [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0 [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76 [<ffffffffffffffff>] 0xffffffffffffffff This patch lets btrfs using fs_info stored in btrfs_root for block group cache directly without allocating a new one. Fixes: d0bd4560 ("Btrfs: add fragment=* debug mount option") Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
commit 33b96d2c upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Franklin S Cooper Jr authored
commit 883cbc90 upstream. This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee00 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Acked-by:
Roger Quadros <rogerq@ti.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Franklin S Cooper Jr authored
commit a2abf904 upstream. This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: b5e50906 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by:
-
Robert Jarzmik authored
commit 07c6b2d0 upstream. Since the switch from mmp_pdma to pxa_dma driver for pxa architectures, the pxa_dma requires 2 arguments, namely the requestor line and the requested priority. Fix the only left device node which was still passing only one argument, making the pxa3xx-nand driver misbehave in a device-tree configuration, ie. failing all data transfers. Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit dc7eb9d5 upstream. We cannot select a symbol that has disabled dependencies, so we get a warning if we ever enable EXYNOS_THERMAL without also turning on THERMAL_OF: warning: (ARCH_EXYNOS) selects EXYNOS_THERMAL which has unmet direct dependencies (THERMAL && (ARCH_EXYNOS || COMPILE_TEST) && THERMAL_OF) This adds another 'select' in the platform code to avoid that case. Alternatively, we could decide to not select EXYNOS_THERMAL here and instead make it a user option. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: f87e6bd3 ("thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Andres Freund authored
commit 90989035 upstream. The 4b3a3212 ("perf hists browser: Support flat callchains") commit over-aggressively tried to optimize callchain_node__init_have_children(). That lead to --tui mode not allowing to expand call chain elements if a call chain element had only one parent. That's why --inverted callgraphs looked halfway sane, but plain ones didn't. Revert that individual optimization, it wasn't really related to the rest of the commit. Signed-off-by:
Andres Freund <andres@anarazel.de> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 4b3a3212 ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.deSigned-off-by:
-
Peter Zijlstra authored
commit 8fdc6539 upstream. Stephane reported that commit: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME") introduced a regression wrt. time tracking, as easily observed by: > This patch introduce a bug in the time tracking of events when > multiplexing is used. > > The issue is easily reproducible with the following perf run: > > $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000 > 1.000730239 652,394 branches (66.41%) > 1.000730239 597,809 branches (66.41%) > 1.000730239 593,870 branches (66.63%) > 1.000730239 651,440 branches (67.03%) > 1.000730239 656,725 branches (66.96%) > 1.000730239 <not counted> branches > > One branches event is shown as not having run. Yet, with > multiplexing, all events should run especially with a 1s (-I 1000) > interval. The delta for time_running comes out to 0. Yet, the event > has run because the kernel is actually multiplexing the events. The > problem is that the time tracking is the kernel and especially in > ctx_sched_out() is wrong now. > > The problem is that in case that the kernel enters ctx_sched_out() with the > following state: > ctx->is_active=0x7 event_type=0x1 > Call Trace: > [<ffffffff813ddd41>] dump_stack+0x63/0x82 > [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0 > [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0 > [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130 > [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0 > [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0 > [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60 > [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50 > [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0 > > In that case, the test: > if (is_active & EVENT_TIME) > > will be false and the time will not be updated. Time must always be updated on > sched out. Fix this by always updating time if EVENT_TIME was set, as opposed to only updating time when EVENT_TIME changed. Reported-by:
Stephane Eranian <eranian@google.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: namhyung@kernel.org Fixes: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME") Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
commit 201c2f85 upstream. In the error path, event_file not being NULL is used to determine whether the event itself still needs to be free'd, so fix it up to avoid leaking. Reported-by:
Leon Yu <chianglungyu@gmail.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Allen Hubbe authored
commit 4f1b50c3 upstream. Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by:
Allen Hubbe <Allen.Hubbe@emc.com> Acked-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Arnd Bergmann authored
commit 1985a881 upstream. The ntb driver assigns between pointers an __iomem tokens, and also casts them to 64-bit integers, which results in compiler warnings on 32-bit systems: drivers/ntb/test/ntb_perf.c: In function 'perf_copy': drivers/ntb/test/ntb_perf.c:213:10: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] vbase = (u64)(u64 *)mw->vbase; ^ drivers/ntb/test/ntb_perf.c:214:14: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] dst_vaddr = (u64)(u64 *)dst; ^ This adds __iomem annotations where needed and changes the temporary variables to iomem pointers to avoid casting them to u64. I did not see the problem in linux-next earlier, but it show showed up in 4.5-rc1. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by:
-
Borislav Petkov authored
commit f594bae0 upstream. I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Marcin Ślusarz authored
commit 89fee59b upstream. Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by:
Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by:
-
Namhyung Kim authored
commit 0c841c6c upstream. The commit 8c430a34 ("perf hists browser: Support folded callchains") missed to update hist_browser__dump() so it always shows graph-style callchains regardless of current setting. To fix that, factor out callchain printing code and rename the existing function which prints graph-style callchain. Signed-off-by:
-
Namhyung Kim authored
commit c221acb0 upstream. When this feature was introduced a check was made if there was a resolved symbol under the cursor, it got lost in commit ea7cd592 ("perf hists browser: Split popup menu actions - part 2"), reinstate it. Signed-off-by:
-
Ezequiel García authored
commit 20c07a5b upstream. Since commit 807f16d4 ("mtd: core: set some defaults when dev.parent is set"), it's now legal for drivers to call nand_scan and nand_scan_ident without setting mtd.owner. Drop the check and while at it remove the BUG() abuse. Fixes: 807f16d4 ("mtd: core: set some defaults when dev.parent is set") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: editorial note - while commit 807f16d4 wasn't explicitly broken, some follow-up commits in the v4.4 release broke a few drivers, since they would hit this BUG() if they used nand_scan() and were built as modules] Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit d267aefc upstream. The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 3b5394a3 upstream. This patch remove the micron_quad_enable() function which force the Quad SPI mode. However, once this mode is enabled, the Micron memory expect ALL commands to use the SPI 4-4-4 protocol. Hence a failure does occur when calling spi_nor_wait_till_ready() right after the update of the Enhanced Volatile Configuration Register (EVCR) in the micron_quad_enable() as the SPI controller driver is not aware about the protocol change. Since there is almost no performance increase using Fast Read 4-4-4 commands instead of Fast Read 1-1-4 commands, we rather keep on using the Extended SPI mode than enabling the Quad SPI mode. Let's take the example of the pretty standard use of 8 dummy cycles during Fast Read operations on 64KB erase sectors: Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data; so 131112 clock cycles. On the other hand the Fast Read 4-4-4 would require 2 cycles for the command, then 6 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data. So 131088 clock cycles. The theorical bandwidth increase is 0.0%. Now using Fast Read operations on 512byte pages: Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the theorical bandwidth increase is 2.3%. Consecutive reads for non sequential pages is not a relevant use case so The Quad SPI mode is not worth it. mtd_speedtest seems to confirm these figures. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 548cd3ab ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR") Signed-off-by:
-
Kunihiko Hayashi authored
commit 3de7beeb upstream. This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d3 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Chao Yu authored
commit ed3360ab upstream. This patch syncs f2fs with commit 6bc445e0 ("ext4 crypto: make sure the encryption info is initialized on opendir(2)") from ext4. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
commit ae108668 upstream. This patch syncs f2fs with commit abdd438b ("ext4 crypto: handle unexpected lack of encryption keys") from ext4. Fix up attempts by users to try to write to a file when they don't have access to the encryption key. Signed-off-by:
-
Jaegeuk Kim authored
commit e3ef1876 upstream. If end_io gets an error, we don't need to set the page as dirty, since we already set f2fs_stop_checkpoint which will not flush any data. This will resolve the following warning. ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.4.0+ #9 Tainted: G O ------------------------------------------------------ xfs_io/26773 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&(&sbi->inode_lock[i])->rlock){+.+...}, at: [<ffffffffc025483f>] update_dirty_page+0x6f/0xd0 [f2fs] and this task is already holding: (&(&q->__queue_lock)->rlock){-.-.-.}, at: [<ffffffff81396ea2>] blk_queue_bio+0x422/0x490 which would create a new lock dependency: (&(&q->__queue_lock)->rlock){-.-.-.} -> (&(&sbi->inode_lock[i])->rlock){+.+...} Signed-off-by:
-
Jaegeuk Kim authored
commit 3c082b7b upstream. We should consider data block allocation to trigger f2fs_balance_fs. Signed-off-by:
-
Jaegeuk Kim authored
commit 03a8bb0e upstream. As Al pointed, d_revalidate should return RCU lookup before using d_inode. This was originally introduced by: commit 34286d66 ("fs: rcu-walk aware d_revalidate method"). Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jaegeuk Kim authored
commit fd694733 upstream. This patch fixes the bug which does not cover a large section case when checking the sanity of superblock. If f2fs detects misalignment, it will fix the superblock during the mount time, so it doesn't need to trigger fsck.f2fs further. Reported-by:
Matthias Prager <linux@matthiasprager.de> Reported-by:
David Gnedt <david.gnedt@davizone.at> Signed-off-by:
-
Shawn Lin authored
commit 2b39e907 upstream. read_raw_super_block was introduced to help find the first valid superblock. Commit da554e48 ("f2fs: recovering broken superblock during mount") changed the behaviour to read both of them and check whether need the recovery flag or not. So the comment before this function isn't consistent with what it actually does. Also, the origin code use two tags to round the err cases, which isn't so readable. So this patch amend the comment and slightly reorganize it. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Jaegeuk Kim authored
commit c90e09f7 upstream. In the encrypted symlink case, we should check its corrupted symname after decrypting it. Otherwise, we can report -ENOENT incorrectly, if encrypted symname starts with '\0'. Signed-off-by:
-
Eryu Guan authored
commit 5e1021f2 upstream. ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Karol Herbst authored
commit cfa52c0c upstream. Because Linux might use bigger pages than the 4K pages to handle those mmio ioremaps, the kmmio code shouldn't rely on the pade id as it currently does. Using the memory address instead of the page id lets us look up how big the page is and what its base address is, so that we won't get a page fault within the same page twice anymore. Tested-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Cc: linux-x86_64@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: pq@iki.fi Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.deSigned-off-by:
-
Chris Phlipot authored
commit 616df645 upstream. Remove the union in evsel so that the database id and priv pointer can be used simultainously without conflicting and crashing. Detailed Description for the fixed bug follows: perf script crashes with a segmentation fault on user space tool version 4.5.rc7.ge2857b when using the python database export API. It works properly in 4.4 and prior versions. the crash fist appeared in: cfc8874a ("perf script: Process cpu/threads maps") How to reproduce the bug: Remove any temporary files left over from a previous crash (if you have already attemped to reproduce the bug): $ rm -r test_db-perf-data $ dropdb test_db $ perf record timeout 1 yes >/dev/null $ perf script -s scripts/python/export-to-postgresql.py test_db Stack Trace: Program received signal SIGSEGV, Segmentation fault. __GI___libc_free (mem=0x1) at malloc.c:2929 2929 malloc.c: No such file or directory. (gdb) bt at util/stat.c:122 argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231 argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390 at perf.c:451 Signed-off-by:
Chris Phlipot <cphlipot0@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: cfc8874a ("perf script: Process cpu/threads maps") Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit a55e5663 upstream. We were dropping the reference we possibly held but not obtaining one for the new maps, which we will drop at perf_evlist__delete(), fix it. This was caught by Steven Noonan in some of the machines which would produce this output when caught by glibc debug mechanisms: $ sudo perf test 21 21: Test object code reading :*** Error in `perf': corrupted double-linked list: 0x00000000023ffcd0 *** ======= Backtrace: ========= /usr/lib/libc.so.6(+0x72055)[0x7f25be0f3055] /usr/lib/libc.so.6(+0x779b6)[0x7f25be0f89b6] /usr/lib/libc.so.6(+0x7a0ed)[0x7f25be0fb0ed] /usr/lib/libc.so.6(__libc_calloc+0xba)[0x7f25be0fceda] perf(parse_events_lex_init_extra+0x38)[0x4cfff8] perf(parse_events+0x55)[0x4a0615] perf(perf_evlist__config+0xcf)[0x4eeb2f] perf[0x479f82] perf(test__code_reading+0x1e)[0x47ad4e] perf(cmd_test+0x5dd)[0x46452d] perf[0x47f4e3] perf(main+0x603)[0x42c723] /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f25be0a1610] perf(_start+0x29)[0x42c859] Further investigation using valgrind led to the reference count imbalance fixed in this patch. Reported-and-Tested-by:
Steven Noonan <steven@uplinklabs.net> Report-Link: http://lkml.kernel.org/r/CAKbGBLjC2Dx5vshxyGmQkcD+VwiAQLbHoXA9i7kvRB2-2opHZQ@mail.gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f30a79b0 ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/n/tip-j0u1bdhr47sa511sgg76kb8h@git.kernel.orgSigned-off-by:
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit fb166ba1 upstream. The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Alexandre Belloni authored
commit aaa3cee5 upstream. The rv8803 has its own driver that should be used. Remove its id from the rx8025 driver. Fixes: b1f9d790Signed-off-by:
-
Dan Carpenter authored
commit 8c09b9fd upstream. We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit a25f4a95 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Alexander Kochetkov authored
commit d5861262 upstream. Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
-
