- 22 Jul, 2014 40 commits
-
-
Philipp Zabel authored
Use the mem2mem helpers introduced to get rid of some duplicated code. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
Using the coda_mutex lock to serialize hardware access would cause "INFO: possible circular locking dependency detected" lockdep warnings. Since the possible locking paths are hard to follow, serialize hardware access with a single workqueue thread. Ultimately the workqueue could be converted to only do register setup and readout for per-command work items. Using the initialized context property, SEQ_END is only queued in coda_release when needed. Signed-off-by:
-
Philipp Zabel authored
The h.264 decoder produces capture frames that are a multiple of the macroblock size (16 pixels). To inform userspace about invalid pixel data at the edges, use the active and padded composing rectangles on the capture queue. The cropping information is obtained from the h.264 sequence parameter set. Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Philipp Zabel authored
This allows us to get rid of the now superfluous v4l2_m2m_get_vq check in G_FMT. Also, we can use this to check the buffer type in G_SELECTION later. Signed-off-by:
-
Philipp Zabel authored
This patch adds support for the CODA960 VPU in Freescale i.MX6 SoCs. It enables h.264 and MPEG4 encoding and decoding support. Besides the usual register shifting, the CODA960 gains frame memory control and GDI registers that are set up for linear mapping right now, needs ENC_PIC_SRC_INDEX to be set beyond the number of internal buffers for some reason, and has subsampling buffers that need to be set up. Also, the work buffer size is increased to 80 KiB. The CODA960 firmware spins if there is not enough input data in the bitstream buffer. To make it continue, buffers need to be copied into the bitstream as soon as they are queued. As the bitstream fifo is written into from two places, it must be protected with a mutex. For that, using a threaded interrupt handler is necessary. Signed-off-by:
-
Antti Palosaari authored
Rename driver namespace according to current driver name. Old msi3101 was name of reference design, msi2500 is name of chip itself. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
There was a lot of duplicated functionality between different stream format handling. Refactor functionality in order to get rid of duplicated code. Signed-off-by:
-
Antti Palosaari authored
Correct some style issues, mostly reported by checkpatch.pl. Signed-off-by:
-
Arun Kumar K authored
Latest MFC v6 firmware requires tile mode and loop filter setting to be done as part of Init buffer command, in sync with v7. This patch adds this support for new v6 firmware. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
Kiran AVND <avnd.kiran@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Arun Kumar K authored
For MFC firmwares, improved versions with bug fixes and feature additions are released keeping the firmware version including major and minor number same. The issue came with the release of a new MFCv6 firmware with an interface change. This patch adds the support of accepting multiple firmware binaries for every version with the driver trying to load firmwares starting from latest. This ensures full backward compatibility regardless of which firmware version and kernel version is used. Signed-off-by:
-
Arun Kumar K authored
The function s5p_mfc_reload_firmware is exactly same as s5p_mfc_load_firmware. So removing the duplicate function. Signed-off-by:
-
Laurent Pinchart authored
X-Patchwork-Delegate: mchehab@redhat.com Replace the custom I2C read/write implementation with SMBUS functions to simplify the driver. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
X-Patchwork-Delegate: mchehab@redhat.com The driver mistakenly prints the ROM version instead of the device ID to the kernel log when detecting the chip. Fix it. Signed-off-by:
-
Paul Bolle authored
X-Patchwork-Delegate: mchehab@redhat.com Remove the CONFIG_ prefix from two Kconfig symbols in a dependency for SMS_SIANO_DEBUGFS. This prefix is invalid inside Kconfig files. Note that the current (common sense) dependency on SMS_USB_DRV and SMS_SDIO_DRV being equal ensures that SMS_SIANO_DEBUGFS will not violate its constraints. These constraint are that: - it should only be built if SMS_USB_DRV is set; - it can't be builtin if USB support is modular. So drop the dependency on SMS_USB_DRV, as it is unneeded. Fixes: 6c84b214 ("[media] sms: fix randconfig building error") Reported-by:
Martin Walch <walch.martin@web.de> Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
CrazyCat authored
Geniatech T220 init fixed - reset cmd from windows driver and fixed TS bus config for cxd2820r. Signed-off-by:
Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by:
-
CrazyCat authored
TS clock inversion in config. Signed-off-by:
-
Mauro Carvalho Chehab authored
* .: (268 commits) Linux 3.16-rc6 um: segv: Save regs only in case of a kernel mode fault um: Fix hung task in fix_range_common() um: Ensure that a stub page cannot get unmapped Revert "um: Fix wait_stub_done() error handling" btrfs: test for valid bdev before kobj removal in btrfs_rm_device Btrfs: fix abnormal long waiting in fsync random: check for increase of entropy_count because of signed conversion ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock irqchip: gic: Fix core ID calculation when topology is read from DT GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes GFS2: memcontrol: Spelling s/invlidate/invalidate/ GFS2: Allow caching of glocks for flock GFS2: Allow flocks to use normal glock dq rather than dq_wait GFS2: replace count*size kzalloc by kcalloc GFS2: Use GFP_NOFS when allocating glocks ... Conflicts: drivers/media/dvb-frontends/si2168.c drivers/media/dvb-frontends/si2168_priv.h drivers/media/tuners/si2157.c
-
Mauro Carvalho Chehab authored
As reported by Kbuildtest: drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_format': drivers/media/v4l2-core/v4l2-subdev.c:136:23: error: 'struct v4l2_subdev' has no member named 'entity' if (format->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_crop': drivers/media/v4l2-core/v4l2-subdev.c:148:21: error: 'struct v4l2_subdev' has no member named 'entity' if (crop->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_selection': drivers/media/v4l2-core/v4l2-subdev.c:161:20: error: 'struct v4l2_subdev' has no member named 'entity' if (sel->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_edid': drivers/media/v4l2-core/v4l2-subdev.c:169:21: error: 'struct v4l2_subdev' has no member named 'entity' if (edid->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'subdev_do_ioctl': >> drivers/media/v4l2-core/v4l2-subdev.c:186:6: warning: unused variable 'rval' [-Wunused-variable] int rval; ^ drivers/media/v4l2-core/v4l2-subdev.c: At top level: drivers/media/v4l2-core/v4l2-subdev.c:129:12: warning: 'check_format' defined but not used [-Wunused-function] static int check_format(struct v4l2_subdev *sd, ^ drivers/media/v4l2-core/v4l2-subdev.c:142:12: warning: 'check_crop' defined but not used [-Wunused-function] static int check_crop(struct v4l2_subdev *sd, struct v4l2_subdev_crop *crop) ^ drivers/media/v4l2-core/v4l2-subdev.c:154:12: warning: 'check_selection' defined but not used [-Wunused-function] static int check_selection(struct v4l2_subdev *sd, ^ drivers/media/v4l2-core/v4l2-subdev.c:167:12: warning: 'check_edid' defined but not used [-Wunused-function] static int check_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) The above warnins happen because those functions are used only when the V4L2 subdev API is enabled. Reported-by:kbuild test robot <fengguang.wu@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Antti Palosaari authored
MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr. Reported-by:
-
Antti Palosaari authored
Commit 0ba2aeb6 (v4l2-ctrls: increase internal min/max/step/def to 64 bit) changes v4l2 controls to 64-bit. Driver it not working on 32-bit arch as it uses directly control 'step' which is changed to 64-bit. Reported-by:
-
Peter Meerwald authored
drivers/built-in.o: In function `isp_video_open': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1253: undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `omap3isp_video_init': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1344: undefined reference to `vb2_dma_contig_init_ctx' /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1350: undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `omap3isp_video_cleanup': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1381: undefined reference to `vb2_dma_contig_cleanup_ctx' make: *** [vmlinux] Error 1 Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
-
Salva Peiró authored
After the zeroing the whole struct struct media_entity_desc u_ent, it is no longer necessary to memset(0) its u_ent.name field. CC: stable@vger.kernel.org Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Signed-off-by:
-
Sakari Ailus authored
Separate validation of different argument types. There's no reason to do this separately for every IOCTL. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
The bridge driver doesn't support interlaced formats, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Laurent Pinchart authored
The SMIA++ sensors are progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by:
-
Dan Carpenter authored
The RSZ_LPF_INT_MASK define is cut and pasted twice so we can remove the second instance. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lad, Prabhakar authored
this patch fixes following sparse warning, dm365_resizer.c:223:1: warning: symbol 'resizer_calculate_resize_ratios' was not declared. Should it be static? dm365_resizer.c:313:5: warning: symbol 'resizer_configure_output_win' was not declared. Should it be static? Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch fixes following checkpatch warning, media/davinci_vpfe/dm365_ipipe.c:1271: WARNING: Missing a blank line after declarations media/davinci_vpfe/dm365_ipipe.c:1313: WARNING: Missing a blank line after declarations Signed-off-by:
-
Philipp Zabel authored
This switches all register accesses to use regmap. It allows to use the regmap cache, tracing, and debug register dump facilities, and removes the need to open code read-modify-writes. Signed-off-by:
-
Philipp Zabel authored
Add support for registering the sensor subdevice using the v4l2-async API. Signed-off-by:
-
Philipp Zabel authored
as are mt9v024 and mt9v034. With minimal changes it is possible to support mt9v02[24] with the same driver. Signed-off-by:
-
Philipp Zabel authored
The read mode register bits 8 and 9 are set and marked as reserved. Don't clear them. Signed-off-by:
-
Philipp Zabel authored
Since (min_row_time - crop->width) can be negative, we have to do a signed comparison here. Otherwise max_t casts the negative value to unsigned int and sets min_hblank to that invalid value. Cc: stable@vger.kernel.org Signed-off-by:
-
Prabhakar Lad authored
This patch fixes following array out of bound warnings, drivers/media/platform/davinci/vpif_display.c: In function 'vpif_remove': drivers/media/platform/davinci/vpif_display.c:1389:36: warning: iteration 1u invokes undefined behavior [-Waggressive-loop-optimizations] vb2_dma_contig_cleanup_ctx(common->alloc_ctx); ^ drivers/media/platform/davinci/vpif_display.c:1385:2: note: containing loop for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { ^ drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_remove': drivers/media/platform/davinci/vpif_capture.c:1581:36: warning: iteration 1u invokes undefined behavior [-Waggressive-loop-optimizations] vb2_dma_contig_cleanup_ctx(common->alloc_ctx); ^ drivers/media/platform/davinci/vpif_capture.c:1577:2: note: containing loop for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { ^ drivers/media/platform/davinci/vpif_capture.c:1580:23: warning: array subscript is above array bounds [-Warray-bounds] common = &ch->common[i]; Reported-by: -
Hans Verkuil authored
Regression fix: V4L2_PIX_FMT_PRIV_MAGIC should only be set for the VIDEO_CAPTURE and VIDEO_OUTPUT buffer types, and not for any others. In the case of the win format this overwrote a pointer value that is passed in from userspace. Just set it for V4L2_BUF_TYPE_VIDEO_CAPTURE and OUTPUT only. Set it before the callback is called, just as is done for try/s_fmt, and again afterwards in case the driver zeroed it. The latter was missing in try/s_fmt, so add it there as well. Currently it is quite likely that drivers clear priv (that was needed for a long time), so it makes sense to set it twice. Signed-off-by:
-
Hans Verkuil authored
V4L2_CAP_EXT_PIX_FORMAT is set for capabilities, but it needs to be set for device_caps as well: device_caps should report all caps relevant to the device node, and this is one of them. Signed-off-by:
-
