- 19 Sep, 2023 21 commits
-
-
Sujuan Chen authored
Introduce support for resetting Wireless Ethernet Dispatcher 3.0 available on MT988 SoC. Co-developed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Sujuan Chen authored
Introduce WED3.0 debugfs entries useful for debugging. Co-developed-by:
-
Lorenzo Bianconi authored
Move specific WED2.0 debugfs entries out of regs array. This is a preliminary patch to introduce WED 3.0 debugfs info. Signed-off-by:
-
Sujuan Chen authored
MT7988 SoC support 802.11 receive reordering offload in hw while MT7986 SoC implements it through the firmware running on the mcu. Co-developed-by:
-
Sujuan Chen authored
Introduce partial AMSDU offload support for MT7988 SoC in order to merge in hw packets belonging to the same AMSDU before passing them to the WLAN nic. Co-developed-by:
-
Lorenzo Bianconi authored
Refactor mtk_wed_check_wfdma_rx_fill() in order to be reused adding HW receive offload support for MT7988 SoC. Co-developed-by:
-
Sujuan Chen authored
Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mtk_wed_soc_data utility structure to contain per-SoC definitions. Signed-off-by:
-
Lorenzo Bianconi authored
Fix MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH and MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH definitions for MT7986 (MT7986 is the only SoC to use them). Fixes: de84a090 ("net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset") Signed-off-by:
-
Lorenzo Bianconi authored
Make mtk_wed_wo_memory_region optionals. This is a preliminary patch to introduce Wireless Ethernet Dispatcher support for MT7988 SoC since MT7988 WED fw image will have a different layout. Signed-off-by:
-
Lorenzo Bianconi authored
Remove mtk_wed_wo_memory_region boot structure in mtk_wed_wo. This is a preliminary patch to introduce WED support for MT7988 SoC. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mtk_wed_buf structure to store both virtual and physical addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a preliminary patch to add WED support for MT7988 SoC since it relies on a different dma descriptor layout not storing page dma addresses. Co-developed-by:
-
Lorenzo Bianconi authored
Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used even on tx side by MT7988 SoC. Signed-off-by:
-
Lorenzo Bianconi authored
Check if rx offload is supported running mtk_wed_get_rx_capa routine before configuring it. This is a preliminary patch to introduce Wireless Ethernet Dispatcher (WED) support for MT7988 SoC. Co-developed-by:
-
Lorenzo Bianconi authored
Similar to mtk_eth_soc, introduce the following wed versioning utility routines: - mtk_wed_is_v1 - mtk_wed_is_v2 This is a preliminary patch to introduce WED support for MT7988 SoC Signed-off-by:
-
Lorenzo Bianconi authored
Introduce MT7988 SoC compatibility string in mtk_wed binding. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce MT7988 SoC compatibility string in mt7986-wo-ccif binding. Acked-by:
-
Eric Dumazet authored
We have data-races while reading np->srcprefs Switch the field to a plain byte, add READ_ONCE() and WRITE_ONCE() annotations where needed, and IPV6_ADDR_PREFERENCES setsockopt() can now be lockless. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230918142321.1794107-1-edumazet@google.comSigned-off-by:
-
Russell King (Oracle) authored
Marek reports that a deadlock occurs with the AX88772A PHY used on the ASIX USB network driver: asix 1-1.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:003:10] driver [Asix Electronics AX88772A] (irq=POLL) Asix Electronics AX88772A usb-001:003:10: attached PHY driver(mii_bus:phy_addr=usb-001:003:10, irq=POLL) asix 1-1.4:1.0 eth0: register 'asix' at usb-12110000.usb-1.4, ASIX AX88772 USB 2.0 Ethernet, a2:99:b6:cd:11:eb asix 1-1.4:1.0 eth0: configuring for phy/internal link mode ============================================ WARNING: possible recursive locking detected 6.6.0-rc1-00239-g8da77df6-dirty #13949 Not tainted -------------------------------------------- kworker/3:3/71 is trying to acquire lock: c6c704cc (&dev->lock){+.+.}-{3:3}, at: phy_start_aneg+0x1c/0x38 but task is already holding lock: c6c704cc (&dev->lock){+.+.}-{3:3}, at: phy_state_machine+0x100/0x2b8 This is because we now consistently call phy_process_state_change() while holding phydev->lock, but the AX88772A PHY driver then goes on to call phy_start_aneg() which tries to grab the same lock - causing deadlock. Fix this by exporting the unlocked version, and use this in the PHY driver instead. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1qiEFs-007g7b-Lq@rmk-PC.armlinux.org.ukSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230918132142.199638-1-colin.i.king@gmail.comSigned-off-by:
-
Shinas Rasheed authored
Separated queue specific interrupts to register to individual msix-vectors instead of using a single generic interrupt handler on a single msix-vector. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20230918065621.2165449-1-srasheed@marvell.comSigned-off-by:
-
- 18 Sep, 2023 19 commits
-
-
David S. Miller authored
Jisheng Zhang says: ==================== stmmac: convert to devm_stmmac_probe_config_dt Russell pointed out there's a new devm_stmmac_probe_config_dt() helper now when reviewing my starfive gmac error handling patch[1]. After greping the code, this nice helper was introduced by Bartosz in [2], I think it's time to convert all dwmac users to this helper and finally complete the TODO in [2] "but once all users of the old stmmac_pltfr_remove() are converted to the devres helper, it will be renamed back to stmmac_pltfr_remove() and the no_dt function removed." Link: https://lore.kernel.org/netdev/ZOtWmedBsa6wQQ6+@shell.armlinux.org.uk/ [1] Link: https://lore.kernel.org/all/20230623100417.93592-1-brgl@bgdev.pl/ [2] Since v1: - rebase on new net-next - add make stmmac_{probe|remove}_config_dt static as suggested by Russell. ==================== Reviewed-by:
Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jisheng Zhang authored
Now there's no external users of these two functions, make them static so that there aren't any new usages of stmmac_probe_config_dt(). To avoid forward declaration, move stmmac_remove_config_dt() location. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Suggested-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Jisheng Zhang authored
Now, all users of the old stmmac_pltfr_remove() are converted to the devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Jisheng Zhang authored
Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
