- 30 Jun, 2011 2 commits
-
-
Konrad Rzeszutek Wilk authored
In the past we would use the GSI value to preset the ACPI SCI IRQ which worked great as GSI == IRQ: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) While that is most often seen, there are some oddities: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) which means that GSI 20 (or pin 20) is to be overriden for IRQ 9. Our code that presets the interrupt for ACPI SCI however would use the GSI 20 instead of IRQ 9 ending up with: xen: sci override: global_irq=20 trigger=0 polarity=1 xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=20 xen: acpi sci 20 .. snip.. calling acpi_init+0x0/0xbc @ 1 ACPI: SCI (IRQ9) allocation failed ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20110413/evevent-119) ACPI: Unable to start the ACPI Interpreter as the ACPI interpreter made a call to 'acpi_gsi_to_irq' which got nine. It used that value to request an IRQ (request_irq) and since that was not present it failed. The fix is to recognize that for interrupts that are overriden (in our case we only care about the ACPI SCI) we should use the IRQ number to present the IRQ instead of the using GSI. End result is that we get: xen: sci override: global_irq=20 trigger=0 polarity=1 xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=9 (gsi=9) xen: acpi sci 9 which fixes the ACPI interpreter failing on startup. CC: stable@kernel.org Reported-by:
Liwei <xieliwei@gmail.com> Tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
Simple enough - we use an extern defined symbol which is not defined when CONFIG_SMP is not defined. This fixes the linker dying. CC: stable@kernel.org Signed-off-by:
-
- 16 Jun, 2011 1 commit
-
-
Konrad Rzeszutek Wilk authored
The earlier attempts (24bdb0b6) at fixing this problem caused other problems to surface (PV guests with no PCI passthrough would have SWIOTLB turned on - which meant 64MB of precious contingous DMA32 memory being eaten up per guest). The problem was: "on xen we add an extra memory region at the end of the e820, and on this particular machine this extra memory region would start below 4g and cross over the 4g boundary: [0xfee01000-0x192655000) Unfortunately e820_end_of_low_ram_pfn does not expect an e820 layout like that so it returns 4g, therefore initial_memory_mapping will map [0 - 0x100000000), that is a memory range that includes some reserved memory regions." The memory range was the IOAPIC regions, and with the 1-1 mapping turned on, it would map them as RAM, not as MMIO regions. This caused the hypervisor to complain. Fortunately this is experienced only under the initial domain so we guard for it. Acked-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
- 15 Jun, 2011 3 commits
-
-
Tom Goetz authored
.. As it won't actually power off the machine. Reported-by:
Sven Köhler <sven.koehler@gmail.com> Tested-by:
Tom Goetz <tom.goetz@virtualcomputer.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
.. which is quite benign. drivers/xen/events.c:398: warning: unused variable ‘desc’ Signed-off-by: -
Andrew Jones authored
The MAXSMP config option requires CPUMASK_OFFSTACK, which in turn requires we init the memory for the maps while we bring up the cpus. MAXSMP also increases NR_CPUS to 4096. This increase in size exposed an issue in the argument construction for multicalls from xen_flush_tlb_others. The args should only need space for the actual number of cpus. Also in 2.6.39 it exposes a bootup problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8157a1d3>] set_cpu_sibling_map+0x123/0x30d ... Call Trace: [<ffffffff81039a3f>] ? xen_restore_fl_direct_reloc+0x4/0x4 [<ffffffff819dc4db>] xen_smp_prepare_cpus+0x36/0x135 .. CC: stable@kernel.org Signed-off-by:
Andrew Jones <drjones@redhat.com> [v2: Updated to compile on 3.0] [v3: Updated to compile when CONFIG_SMP is not defined] Signed-off-by:
-
- 09 Jun, 2011 1 commit
-
-
Stefano Stabellini authored
We only need to set max_pfn_mapped to the last pfn mapped on x86_64 to make sure that cleanup_highmap doesn't remove important mappings at _end. We don't need to do this on x86_32 because cleanup_highmap is not called on x86_32. Besides lowering max_pfn_mapped on x86_32 has the unwanted side effect of limiting the amount of memory available for the 1:1 kernel pagetable allocation. This patch reverts the x86_32 part of the original patch. CC: stable@kernel.org Signed-off-by:
-
- 03 Jun, 2011 1 commit
-
-
Dan Carpenter authored
b->args[] has MC_ARGS elements, so the comparison here should be ">=" instead of ">". Otherwise we read past the end of the array one space. CC: stable@kernel.org Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 31 May, 2011 1 commit
-
-
Stefano Stabellini authored
Do not use pirq_needs_eoi to decide which irq handler to use because Xen always returns true if the guest does not support pirq_eoi_map. Use the trigger information we already have from MP-tables and ACPI. Signed-off-by:
-
- 30 May, 2011 1 commit
-
-
Linus Torvalds authored
.. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 May, 2011 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Remove ecryptfs_header_cache_2 eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() eCryptfs: Return useful code from contains_ecryptfs_marker eCryptfs: Fix new inode race condition eCryptfs: Cleanup inode initialization code eCryptfs: Consolidate inode functions into inode.c
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits) pnfs-obj: pg_test check for max_io_size NFSv4.1: define nfs_generic_pg_test NFSv4.1: use pnfs_generic_pg_test directly by layout driver NFSv4.1: change pg_test return type to bool NFSv4.1: unify pnfs_pageio_init functions pnfs-obj: objlayout_encode_layoutcommit implementation pnfs: encode_layoutcommit pnfs-obj: report errors and .encode_layoutreturn Implementation. pnfs: encode_layoutreturn pnfs: layoutret_on_setattr pnfs: layoutreturn pnfs-obj: osd raid engine read/write implementation pnfs: support for non-rpc layout drivers pnfs-obj: define per-inode private structure pnfs: alloc and free layout_hdr layoutdriver methods pnfs-obj: objio_osd device information retrieval and caching pnfs-obj: decode layout, alloc/free lseg pnfs-obj: pnfs_osd XDR client implementation pnfs-obj: pnfs_osd XDR definitions pnfs-obj: objlayoutdriver module skeleton ...
-
Linus Torvalds authored
We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by:
Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Tyler Hicks authored
Now that ecryptfs_lookup_interpose() is no longer using ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to ecryptfs_header_cache. Signed-off-by:Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
ecryptfs_lookup_interpose() has turned into spaghetti code over the years. This is an effort to clean it up. - Shorten overly descriptive variable names such as ecryptfs_dentry - Simplify gotos and error paths - Create helper function for reading plaintext i_size from metadata It also includes an optimization when reading i_size from the metadata. A complete page-sized kmem_cache_alloc() was being done to read in 16 bytes of metadata. The buffer for that is now statically declared. Signed-off-by: -
Tyler Hicks authored
Instead of having the calling functions translate the true/false return code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or -EINVAL so that the calling functions can just reuse the return code. Also, rename the function to ecryptfs_validate_marker() to avoid callers mistakenly thinking that it returns true/false codes. Signed-off-by: -
Tyler Hicks authored
Only unlock and d_add() new inodes after the plaintext inode size has been read from the lower filesystem. This fixes a race condition that was sometimes seen during a multi-job kernel build in an eCryptfs mount. https://bugzilla.kernel.org/show_bug.cgi?id=36002Signed-off-by:
David <david@unsolicited.net> Tested-by:
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits) acer-wmi: support integer return type from WMI methods msi-laptop: fix section mismatch in reference from the function load_scm_model_init acer-wmi: support to set communication device state by new wmid method acer-wmi: allow 64-bits return buffer from WMI methods acer-wmi: check the existence of internal 3G device when set capability platform/x86:delete two unused variables support wlan hotkey on Acer Travelmate 5735Z platform-x86: intel_mid_thermal: Fix memory leak platform/x86: Fix Makefile for intel_mid_powerbtn platform/x86: Simplify intel_mid_powerbtn acer-wmi: Delete out-of-date documentation acerhdf: Clean up includes acerhdf: Drop pointless dependency on THERMAL_HWMON acer-wmi: Update MAINTAINERS wmi: Orphan ACPI-WMI driver tc1100-wmi: Orphan driver acer-wmi: does not allow negative number set to initial device state platform/oaktrail: ACPI EC Extra driver for Oaktrail thinkpad_acpi: Convert printks to pr_<level> thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning ...
-
Linus Torvalds authored
Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c11ae035>] find_next_bit+0x55/0xb0 Call Trace: [<c11addda>] cpumask_any_but+0x2a/0x70 [<c102396b>] flush_tlb_mm+0x2b/0x80 [<c1022705>] pud_populate+0x35/0x50 [<c10227ba>] pgd_alloc+0x9a/0xf0 [<c103a3fc>] mm_init+0xec/0x120 [<c103a7a3>] mm_alloc+0x53/0xd0 which was introduced by commit de03c72c ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by:Thomas Gleixner <tglx@linutronix.de> Reported-by:
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] mm: fix mmu_gather rework [S390] mm: fix storage key handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: more /proc and /sys file support
-
Matthew Garrett authored
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd: make local functions static NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() NFSD: Check status from nfsd4_map_bcts_dir() NFSD: Remove setting unused variable in nfsd_vfs_read() nfsd41: error out on repeated RECLAIM_COMPLETE nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence nfsd v4.1 lOCKT clientid field must be ignored nfsd41: add flag checking for create_session nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly nfsd4: fix wrongsec handling for PUTFH + op cases nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller nfsd4: introduce OPDESC helper nfsd4: allow fh_verify caller to skip pseudoflavor checks nfsd: distinguish functions of NFSD_MAY_* flags svcrpc: complete svsk processing on cb receive failure svcrpc: take advantage of tcp autotuning SUNRPC: Don't wait for full record to receive tcp data svcrpc: copy cb reply instead of pages svcrpc: close connection if client sends short packet svcrpc: note network-order types in svc_process_calldir ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: return client directly and not through a pointer dm kcopyd: reserve fewer pages dm io: use fixed initial mempool size dm kcopyd: alloc pages from the main page allocator dm kcopyd: add gfp parm to alloc_pl dm kcopyd: remove superfluous page allocation spinlock dm kcopyd: preallocate sub jobs to avoid deadlock dm kcopyd: avoid pointless job splitting dm mpath: do not fail paths after integrity errors dm table: reject devices without request fns dm table: allow targets to support discards internally
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Support for RPC over AF_LOCAL transports SUNRPC: Remove obsolete comment SUNRPC: Use AF_LOCAL for rpcbind upcalls SUNRPC: Clean up use of curly braces in switch cases NFS: Revert NFSROOT default mount options SUNRPC: Rename xs_encode_tcp_fragment_header() nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() nfs41: Correct offset for LAYOUTCOMMIT NFS: nfs_update_inode: print current and new inode size in debug output NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors NFSv4: Handle expired stateids when the lease is still valid SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Fix sanity check patches on big-endian systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI EC: remove redundant code ACPI: Add D3 cold state ACPI: processor: fix processor_physically_present in UP kernel ACPI: Split out custom_method functionality into an own driver ACPI: Cleanup custom_method debug stuff ACPI EC: enable MSI workaround for Quanta laptops ACPICA: Update to version 20110413 ACPICA: Execute an orphan _REG method under the EC device ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place ACPICA: Update internal address SpaceID for DataTable regions ACPICA: Add more methods eligible for NULL package element removal ACPICA: Split all internal Global Lock functions to new file - evglock ACPI: EC: add another DMI check for ASUS hardware ACPI EC: remove dead code ACPICA: Fix code divergence of global lock handling ACPICA: Use acpi_os_create_lock interface ACPI: osl, add acpi_os_create_lock interface ACPI:Fix goto flows in thermal-sys
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6Linus Torvalds authored
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param x86 idle: deprecate "no-hlt" cmdline param x86 idle APM: deprecate CONFIG_APM_CPU_IDLE x86 idle floppy: deprecate disable_hlt() x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it x86 idle: clarify AMD erratum 400 workaround idle governor: Avoid lock acquisition to read pm_qos before entering idle cpuidle: menu: fixed wrapping timers at 4.294 seconds
-
Al Viro authored
Commit 1495f230 ("vmscan: change shrinker API by passing shrink_control struct") changed the API of ->shrink(), but missed ubifs and cifs instances. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Boaz Harrosh authored
Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> [simplify logic] Signed-off-by:
Benny Halevy <bhalevy@panasas.com>
-
Boaz Harrosh authored
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by:
-
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
Signed-off-by: -
Benny Halevy authored
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: -
Boaz Harrosh authored
* Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by:
-
Benny Halevy authored
Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: -
Boaz Harrosh authored
An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by:
-
Andy Adamson authored
Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by:
Andy Adamson <andros@netapp.com> [fixup layout header pointer for encode_layoutreturn] Signed-off-by:
-
Benny Halevy authored
With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by: -
Benny Halevy authored
NFSv4.1 LAYOUTRETURN implementation Currently, does not support layout-type payload encoding. Signed-off-by:
Alexandros Batsakis <batsakis@netapp.com> Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by:
Fred Isaman <iisaman@citi.umich.edu> Signed-off-by:
Fred Isaman <iisaman@netapp.com> Signed-off-by:
Marc Eshel <eshel@almaden.ibm.com> Signed-off-by:
Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> [call pnfs_return_layout right before pnfs_destroy_layout] [remove assert_spin_locked from pnfs_clear_lseg_list] [remove wait parameter from the layoutreturn path.] [remove return_type field from nfs4_layoutreturn_args] [remove range from nfs4_layoutreturn_args] [no need to send layoutcommit from _pnfs_return_layout] [don't wait on sync layoutreturn] [fix layout stateid in layoutreturn args] [fixed NULL deref in _pnfs_return_layout] [removed recaim member of nfs4_layoutreturn_args] Signed-off-by:
-
