Currently the Receive completion handler refreshes the Receive Queue
whenever a successful Receive completion occurs.

On disconnect, xprtrdma drains the Receive Queue. The first few
Receive completions after a disconnect are typically successful,
until the first flushed Receive.

This means the Receive completion handler continues to post more
Receive WRs after the drain sentinel has been posted. The late-
posted Receives flush after the drain sentinel has completed,
leading to a crash later in rpcrdma_xprt_disconnect().

To prevent this crash, xprtrdma has to ensure that the Receive
handler stops posting Receives before ib_drain_rq() posts its
drain sentinel.
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Commit e340c2d6 ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.

This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.

Fixes: e340c2d6 ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Fix up a static compiler warning:
"fs/nfs/nfs4proc.c:3882 _nfs4_server_capabilities() warn: was expecting
a 64 bit value instead of '(1 << 11)'"

The fix is to convert the fattr_valid field to match the type of the
'valid' field in struct nfs_fattr.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the server hands us a layout that does not match the one we currently
hold, then have pnfs_mark_matching_lsegs_return() just ditch the old
layout if NFS_LSEG_LAYOUTRETURN is not set.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).

Fixes: 6d597e17 ("pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).

Fixes: e0b7d420 ("pNFS: Don't discard layout segments that are marked for return")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the NFS super block is being unmounted, then we currently may end up
telling the server that we've forgotten the layout while it is actually
still in use by the client.
In that case, just assume that the client will soon return the layout
anyway, and so return NFS4ERR_DELAY in response to the layout recall.

Fixes: 58ac3e59 ("NFSv4/pnfs: Clean up nfs_layout_find_inode()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When a copy offload is performed, we do not expect the source file to
change other than perhaps to see the atime be updated.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the result of a copy offload or clone operation is to grow the
destination file size, then we should update it. The reason is that when
a client holds a delegation, it is authoritative for the file size.

Fixes: 16abd2a0 ("NFSv4.2: fix client's attribute cache management for copy_file_range")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.

For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:

1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
   minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
   to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
   reached, but skipped because the minor timeout is not reached
       - After this time the cpu spins continually calling
       	 xport_adjust_timeout() and returning 0 for 10 seconds.
	 As seen on perf sched:
   	 39243.913182 [0005]  mount.nfs[3794] 4607.938      0.017   9746.863
6. This continues until the 15s minor timeout condition is reached (in
   this case for 10 seconds). After which the ETIMEOUT is processed
   back to the caller, the cpu spinning stops, and normal operations
   continue

Fixes: 7de62bc0 ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <Christopher.Dion@dell.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.

BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872

CPU: 11 PID: 331872 Comm: git Tainted: G S                5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
 dump_stack+0x9c/0xcf
 print_address_description.constprop.0+0x18/0x239
 kasan_report+0x174/0x1b0
 trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
 xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
 call_transmit+0x4d/0xc6 [sunrpc]

Fixes: 9ce07ae5 ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

A separate tracepoint can be left enabled all the time to capture
rare but important retransmission events. So for example:

kworker/u26:3-568   [009]   156.967933: xprt_retransmit:      task:44093@5 xid=0xa25dbc79 nfsv3 WRITE ntrans=2

Or, for example, enable all nfs and nfs4 tracepoints, and set up a
trigger to disable tracing when xprt_retransmit fires to capture
everything that leads up to it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.

The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.

Fixes: 4a068258 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.

Fixes: 1c6dcbe5 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:

	if (fh->size > sizeof(struct nfs_fh))

should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.

struct nfs_fh {
	unsigned short         size;
	unsigned char          data[NFS_MAXFHSIZE];
}

but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination.  The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.

Fixes: d67ae825 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <nlivic@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the server returns a filehandle with an invalid length, then trace
that, and return an EREMOTEIO error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We would like the ability to record other XDR errors, particularly
those that are due to server bugs.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When the server returns a different operation than we expected, then
trace that.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

There are lots of attributes, and they are crowding out the bit space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS_INO_REVAL_FORCED is intended to tell us that the cache needs
revalidation despite the fact that we hold a delegation. We shouldn't
need to store it anymore, though.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the nlink changes, then so will the ctime.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If we're trying to update the inode because a previous update left the
cache in a partially unrevalidated state, then allow the update if the
change attrs match.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the NFSv4.2 server supports the 'change_attr_type' attribute, then
allow the client to optimise its attribute cache update strategy.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The change_attr_type allows the server to provide a description of how
the change attribute will behave. This again will allow the client to
optimise its behaviour w.r.t. attribute revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When the client is caching data and a write delegation is held, then the
server may send a CB_GETATTR to query the attributes. When this happens,
the client is supposed to bump the change attribute value that it
returns if it holds cached data.
However that process uses a value that is stored in the delegation. We
do not want to bump the change attribute held in the inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

At least two extra fields have been added to fsinfo since this was last
updated.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We should not be invalidating the access or acl caches in
nfs_check_inode_attributes(), since the point is we're unsure about
whether the contents of the struct nfs_fattr are fully up to date.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Commit 0b467264 ("NFS: Fix attribute revalidation") changed the way
we populate the 'invalid' attribute, and made the line that strips away
the NFS_INO_INVALID_ATTR bits redundant.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If there is an outstanding layoutcommit, then the list of attributes
whose values are expected to change is not the full set. So let's
be explicit about the full list.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

chown()/chgrp() and chmod() are separate operations, and in addition,
there are mode operations that are performed automatically by the
server. So let's track mode validity separately from the file ownership
validity.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Rename can cause us to revalidate the access cache, so lets track the
nlinks separately from the mode/uid/gid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Don't remove flags from the set retrieved from the cache_validity.
We do want to retrieve all attributes that are listed as being
invalid, whether or not there is a delegation set.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

It is no longer necessary to preserve the NFS_INO_REVAL_PAGECACHE flag.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When checking cache validity, be more specific than just 'we want to
check the page cache validity'. In almost all cases, we want to check
that change attribute, and possibly also the size.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add an argument to nfs_revalidate_inode() to allow callers to specify
which attributes they need to check for validity.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When we do a 'chown' or 'chgrp', the server will clear the suid/sgid
bits. Ensure that we mirror that in nfs_setattr_update_inode().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If statx has valid attributes available that weren't asked for, then
return them and set the result mask appropriately.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the user doesn't set STATX_UID/GID/MODE, then don't care if they are
known to be stale. Ditto if we're not being asked for the file size.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ensure that when the change attribute or the size change, we also
remember to revalidate the space used.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>