- 09 Mar, 2017 20 commits
-
-
Eric Dumazet authored
This is really a port attribute, no need to duplicate it per RX queue and per frag. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
No need to duplicate it for all queues and frags. num_frags & log_rx_info become u8 to save space. u8 accesses are a bit faster than u16 anyway. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: cosmetics Couple of cosmetic mlxsw patches ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The overrun ignore bit isn't supported by the device's firmware and was recently removed from the programmer's reference manual (PRM). Remove it from the driver as well. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Commit dd82364c ("mlxsw: Flip to the new dev walk API") did some small changes in mlxsw code, but it did not respect the naming conventions. So fix this now. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
__sk_dst_set() must be called while we own the socket. We can get proper lockdep coverage using lockdep_sock_is_held() and rcu_dereference_protected() Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== flow dissector improvements This patchset follows-up the discussion about future extensions of flow dissector and tries to address the mentioned concerns. Some parts are cut out into sub-functions. Also, the processing of the code (ARP, MPLS) is made dependent on user actually requiring the bisected values. This prepares the code for future extensions to bisect IPv6 ND messages, TCP flags, etc. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Make the main flow_dissect function a bit smaller and move the GRE dissection into a separate function. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Align with "ip_proto_again" label used in the same function and rename vague "again" to "proto_again". Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Now, when an unexpected element in the GRE header appears, we break so the l4 ports are processed. But since the ports are processed unconditionally, there will be certainly random values dissected. Fix this by just bailing out in such situations. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Make the main flow_dissect function a bit smaller and move the MPLS dissection into a separate function. Along with that, do the MPLS header processing only in case the flow dissection user requires it. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Make the main flow_dissect function a bit smaller and move the ARP dissection into a separate function. Along with that, do the ARP header processing only in case the flow dissection user requires it. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Tested-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 07 Mar, 2017 20 commits
-
-
Gao Feng authored
Use existing TCP nagle macro TCP_NAGLE_OFF and TCP_NAGLE_CORK instead of the literal number 1 and 2 in the current decnet codes. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Timur Tabi authored
Adjust the impedance values of the RX and TX lanes in the SGMII block so that they are closer to optimal values. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jon Mason says: ==================== net: ethernet: bgmac: PM support and clean-ups Changes in v3: * Corrected a bug Florian found and added his Reviewed-by Changes in v2: * Reworked the PM patch with Florian's suggestions Add code to support Power Management (only tested on NS2), and add some code clean-ups ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joey Zhong authored
Implement suspend/resume callbacks in the bgmac driver. This makes sure that we de-initialize and re-initialize the hardware correctly before entering suspend and when resuming. Signed-off-by:
Joey Zhong <zhongx@broadcom.com> Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Mason authored
BCM471X and BCM535X are of the same family (from what I can derive from internal documents). Group them into the case statement together, which results in more code reuse. Also, use existing helper variables to make the code a little more readable too. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Mason authored
The maximum frame size is really just the standard ethernet frame size and FCS. So use those existing defines to make the code a little more beautiful. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Use eth_hw_addr_random() to set a random MAC address in order to make sure ndev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== NAPI support for Hyper-V These patches enable NAPI, GRO and napi_alloc_skb for Hyper-V netvsc driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Gives potential performance gain. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Use GRO when receiving packets. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Use NAPI (softirq), to handle receive packets and send completions. Previously this was handled by tasklet. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This is mostly just a refactoring of previous functions (get_pkt_next_raw, put_pkt_raw and commit_rd_index) to make it easier to use for other drivers and NAPI. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
There are two variables named packet in the same function. One is the metadata descriptor from host (vmpacket_descriptor) and the other is the control block in the skb used to hold metadata from send. Change name to avoid possible confusion and bugs. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
This patch adds a function to clean up duplicate config info on Ubuntu. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Forster authored
This provides equivalent functionality to the existing ipv4 "disable_policy" systcl. ie. Allows IPsec processing to be skipped on terminating packets on a per-interface basis. Signed-off-by:
David Forster <dforster@brocade.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-