- 12 Jun, 2020 1 commit
-
-
Andy Lutomirski authored
BUG/WARN are cleverly optimized using UD2 to handle the BUG/WARN out of line in an exception fixup. But if BUG or WARN is issued in a funny RCU context, then the idtentry_enter...() path might helpfully WARN that the RCU context is invalid, which results in infinite recursion. Split the BUG/WARN handling into an nmi_enter()/nmi_exit() path in exc_invalid_op() to increase the chance to survive the experience. [ tglx: Make the declaration match the implementation ] Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/f8fe40e0088749734b4435b554f73eee53dcf7a8.1591932307.git.luto@kernel.org
-
- 11 Jun, 2020 39 commits
-
-
Thomas Gleixner authored
The entry rework moved interrupt entry code from the irqentry to the noinstr section which made the irqentry section empty. This breaks boundary checks which rely on the __irqentry_text_start/end markers to find out whether a function in a stack trace is interrupt/exception entry code. This affects the function graph tracer and filter_irq_stacks(). As the IDT entry points are all sequentialy emitted this is rather simple to unbreak by injecting __irqentry_text_start/end as global labels. To make this work correctly: - Remove the IRQENTRY_TEXT section from the x86 linker script - Define __irqentry so it breaks the build if it's used - Adjust the entry mirroring in PTI - Remove the redundant kprobes and unwinder bound checks Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: exc_page_fault()+0x9: call to read_cr2() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x24: call to prefetchw() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_page_fault()+0x21: call to kvm_handle_async_pf.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_nmi()+0x1cc: call to write_cr2() leaves .noinstr.text section Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: debug_locks_off()+0xd: call to __debug_locks_off() leaves .noinstr.text section vmlinux.o: warning: objtool: match_held_lock()+0x6a: call to look_up_lock_class.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x90: call to lockdep_recursion_finish() leaves .noinstr.text section Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: exc_debug()+0xbb: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: noist_exc_debug()+0x55: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section Rework things so that handle_debug() looses the noinstr and move the clear_thread_flag() into that. Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x33: call to arch_atomic_and.constprop.0() leaves .noinstr.text section Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: lockdep_hardirqs_on()+0x65: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lockdep_hardirqs_off()+0x5d: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x35: call to arch_local_irq_save() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x31: call to arch_local_save_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: check_preemption_disabled()+0x33: call to arch_irqs_disabled_flags() leaves .noinstr.text section vmlinux.o: warning: objtool: lock_is_held_type()+0x2f: call to native_irq_disable() leaves .noinstr.text section Signed-off-by:
-
Peter Zijlstra authored
vmlinux.o: warning: objtool: exc_debug()+0x21: call to native_get_debugreg() leaves .noinstr.text section Signed-off-by:
-
Thomas Gleixner authored
- Move load_current_idt() out of line and replace the hideous comment with a lockdep assert. This allows to make idt_table and idt_descr static. - Mark idt_table read only after the IDT initialization is complete. - Shuffle code around to consolidate the #ifdef sections into one. - Adapt the F00F bug code. Signed-off-by:
-
Thomas Gleixner authored
No point in having all the IDT cruft in trap_init(). Move it into the IDT code and fixup the comments. Signed-off-by:
-
Thomas Gleixner authored
Use the actual struct size to calculate the IDT table size instead of hardcoded values. Signed-off-by:
-
Thomas Gleixner authored
The difference between 32 and 64 bit vs. early #PF handling is not documented. Replace the FIXME at idt_setup_early_pf() with proper comments. Signed-off-by:
-
Thomas Gleixner authored
Since 8175cfbbbfcb ("x86/idt: Remove update_intr_gate()") set_intr_gate() and idt_setup_from_table() are only called from __init functions. Mark them as well. Signed-off-by: -
Peter Zijlstra authored
The typical pattern for trace_hardirqs_off_prepare() is: ENTRY lockdep_hardirqs_off(); // because hardware ... do entry magic instrumentation_begin(); trace_hardirqs_off_prepare(); ... do actual work trace_hardirqs_on_prepare(); lockdep_hardirqs_on_prepare(); instrumentation_end(); ... do exit magic lockdep_hardirqs_on(); which shows that it's named wrong, rename it to trace_hardirqs_off_finish(), as it concludes the hardirq_off transition. Also, given that the above is the only correct order, make the traditional all-in-one trace_hardirqs_off() follow suit. Signed-off-by: -
Peter Zijlstra authored
Because: irq_enter_rcu() includes lockdep_hardirq_enter() irq_exit_rcu() does *NOT* include lockdep_hardirq_exit() Which resulted in two 'stray' lockdep_hardirq_exit() calls in idtentry.h, and me spending a long time trying to find the matching enter calls. Signed-off-by:
-
Peter Zijlstra authored
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE text and no single step (EFLAGS.TF) inside the #DB handler should guarantee no nested #DB. Signed-off-by:
-
Peter Zijlstra authored
This is all unused now. Signed-off-by:
-
Peter Zijlstra authored
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper than a cacheline miss on native, add a virt specific fast path to local_db_save(), such that when breakpoints are not in use to avoid touching DRn entirely. Suggested-by:
-
Peter Zijlstra authored
#MC is fragile as heck, don't tempt fate. Signed-off-by:
-
Peter Zijlstra authored
Instead of playing stupid games with IST stacks, fully disallow #DB during NMIs. There is absolutely no reason to allow them, and killing this saves a heap of trouble. #DB is already forbidden on noinstr and CEA, so there can't be a #DB before this. Disabling it right after nmi_enter() ensures that the full NMI code is protected. Signed-off-by:
-
Peter Zijlstra authored
In order to allow other exceptions than #DB to disable breakpoints, provide common helpers. Signed-off-by:
-
Lai Jiangshan authored
The per-CPU user_pcid_flush_mask is used in the low level entry code. A data breakpoint can cause #DB recursion. Protect the full cpu_tlbstate structure for simplicity. Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by:
-
Lai Jiangshan authored
cpu_tss_rw is not directly referenced by hardware, but cpu_tss_rw is accessed in CPU entry code, especially when #DB shifts its stacks. If a data breakpoint would be set on cpu_tss_rw.x86_tss.ist[IST_INDEX_DB], it would cause recursive #DB ending up in a double fault. Add it to the list of protected items. Signed-off-by:
-
Lai Jiangshan authored
A data breakpoint on the GDT can be fatal and must be avoided. The GDT in the CPU entry area is already protected, but not the direct GDT. Add the necessary protection. Signed-off-by:
-
Lai Jiangshan authored
Add a within_area() helper to checking whether the data breakpoints overlap with cpu_entry_area. It will be used to completely prevent data breakpoints on GDT, IDT, or TSS. Signed-off-by:
-
Vitaly Kuznetsov authored
Kbuild test robot reports the following problem on ARM: for 'xen_setup_callback_vector' [-Wmissing-prototypes] 1664 | void xen_setup_callback_vector(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that xen_setup_callback_vector is a x86 only thing, its definition is present in arch/x86/xen/xen-ops.h but not on ARM. In events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared as 'static'. On x86 the situation is hardly better: drivers/xen/events/events_base.c doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake from include/xen/ which also results in a 'no previous prototype' warning. Currently, xen_setup_callback_vector() has two call sites: one in drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The former is placed under #ifdef CONFIG_X86 and the later is only compiled in when CONFIG_XEN_PVHVM. Resolve the issue by moving xen_setup_callback_vector() declaration to arch neutral 'include/xen/hvm.h' as the implementation lives in arch neutral drivers/xen/events/events_base.c. Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com
-
Thomas Gleixner authored
No more users. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
Thomas Gleixner authored
The last step to remove the irq tracing cruft from ASM. Ignore #DF as the maschine is going to die anyway. Signed-off-by:
-
Thomas Gleixner authored
Since INT3/#BP no longer runs on an IST, this workaround is no longer required. Tested by running lockdep+ftrace as described in the initial commit: 5963e317 ("ftrace/x86: Do not change stacks in DEBUG when calling lockdep") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
-
Thomas Gleixner authored
All exceptions/interrupts return with interrupts disabled now. No point in doing this in ASM again. Signed-off-by:
-
Thomas Gleixner authored
The ASM users are gone. All callers are local. Signed-off-by:
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
Remove all the code which was there to emit the system vector stubs. All users are gone. Move the now unused GET_CR2_INTO macro muck to head_64.S where the last user is. Fixup the eye hurting comment there while at it. Signed-off-by:
-
Thomas Gleixner authored
The scheduler IPI does not need the full interrupt entry handling logic when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare all the overhead. Signed-off-by:
-
Thomas Gleixner authored
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes Fixup the related XEN code by providing the primary C entry point in x86 to avoid cluttering the generic code with X86'isms. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert various hypervisor vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
-
Thomas Gleixner authored
Convert KVM specific system vectors to IDTENTRY_SYSVEC*: The two empty stub handlers which only increment the stats counter do no need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them. The wakeup handler does more work and runs on the interrupt stack. None of these handlers need to save and restore the irq_regs pointer. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Thomas Gleixner authored
Convert various system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert SMP system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert APIC interrupts to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
