Dan Carpenter reported that Smatch found an instance where a pointer
which had previously been assumed could be null (as indicated by a
null check) was later dereferenced without a similar check.

In practice this doesn't lead to a problem because currently the
pointers used are all non-null.  Nevertheless this patch addresses
the reported problem.

In addition, I spotted another bug that arose in the same commit.
When the command to initialize a routing table memory region was
added, the number of entries computed for the non-hashed table
was wrong (it ended up being a Boolean rather than the count
intended).  This bug is fixed here as well.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kiliTested-by: Caleb Connolly <caleb.connolly@linaro.com>
Fixes: 5cb76899 ("net: ipa: reduce arguments to ipa_table_init_add()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.2

Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.

Major changes:

ath11k

* support configuring channel dwell time during scan

rtw89

* new dynamic header firmware format support

* Wake-over-WLAN support

rtl8xxxu

* enable IEEE80211_HW_SUPPORT_FAST_XMIT
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: support vrf processing

This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP,
it includes socket bind and socket/association lookup changes.

For socket bind change, it allows sockets to bind to a VRF device
and allows multiple sockets with the same IP and PORT to bind to
different interfaces in patch 1-3.

For socket/association lookup change, it adds dif and sdif check
in both asoc and ep lookup in patch 4 and 5, and when binding to
nodev, users can decide if accept the packets received from one
l3mdev by setup a sysctl option in patch 6.

Note with VRF support, in a netns, an association will be decided
by src ip + src port + dst ip + dst port + bound_dev_if, and it's
possible for ss to have:

  State       Local Address:Port      Peer Address:Port
   ESTAB     192.168.1.2%vrf-s1:1234
   `- ESTAB   192.168.1.2%veth1:1234   192.168.1.1:1234
   ESTAB     192.168.1.2%vrf-s2:1234
   `- ESTAB   192.168.1.2%veth2:1234   192.168.1.1:1234

See the selftest in patch 7 for more usage.

Also, thanks Carlo for testing this patch series on their use.

v1->v2:
  - In Patch 5, move sctp_sk_bound_dev_eq() definition to net/sctp/
    input.c to avoid a build error when IP_SCTP is disabled, as Paolo
    suggested.
  - In Patch 7, avoid one sleep by disabling the IPv6 dad, and remove
    another sleep by using ss to check if the server's ready, and also
    delete two unncessary sleeps in sctp_hello.c, as Paolo suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds 12 small test cases: 01-04 test for the sysctl
net.sctp.l3mdev_accept. 05-10 test for only binding to a right
l3mdev device, the connection can be created. 11-12 test for
two socks binding to different l3mdev devices at the same time,
each of them can process the packets from the corresponding
peer. The tests run for both IPv4 and IPv6 SCTP.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.

Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:

sctp_rcv():
  asoc:
  __sctp_rcv_lookup()
    __sctp_lookup_association() -> sctp_addrs_lookup_transport()
    __sctp_rcv_lookup_harder()
      __sctp_rcv_init_lookup()
         __sctp_lookup_association() -> sctp_addrs_lookup_transport()
      __sctp_rcv_walk_lookup()
         __sctp_rcv_asconf_lookup()
           __sctp_lookup_association() -> sctp_addrs_lookup_transport()

  ep:
  __sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match()

sctp_connect():
  sctp_endpoint_is_peeled_off()
    __sctp_lookup_association()
      sctp_has_association()
        sctp_lookup_association()
          __sctp_lookup_association() -> sctp_addrs_lookup_transport()

sctp_diag_dump_one():
  sctp_transport_lookup_process() -> sctp_addrs_lookup_transport()
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add skb_sdif function in struct sctp_af to get the enslaved device
for both ipv4 and ipv6 when adding SCTP VRF support in sctp_rcv in
the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In sctp_get_port_local(), when binding to IP and PORT, it should
also check sk_bound_dev_if to match listening sk if it's set by
SO_BINDTOIFINDEX, so that multiple sockets with the same IP and
PORT, but different sk_bound_dev_if can be listened at the same
time.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When binding to an ipv6 address, it calls ipv6_chk_addr() to check if
this address is on any dev. If a socket binds to a l3mdev but no dev
is passed to do this check, all l3mdev and slaves will be skipped and
the check will fail.

This patch is to pass the bound_dev to make sure the devices under the
same l3mdev can be returned in ipv6_chk_addr(). When the bound_dev is
not a l3mdev or l3slave, l3mdev_master_dev_rcu() will return NULL in
__ipv6_chk_addr_and_flags(), it will keep compitable with before when
NULL dev was passed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After binding to a l3mdev, it should use the route table from the
corresponding VRF to verify the addr when binding to an address.

Note ipv6 doesn't need it, as binding to ipv6 address does not
verify the addr with route lookup.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix duplicate check on polling timeout.

Fixes: 1efa9bfe ("net: libwx: Implement interaction with firmware")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following 1b16b3fd ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"),
go one step further and instead of calling memzero_explicit on the key
when freeing a flow, simply not copy the key in the first place as it's
only used when a new flow is set up.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: change GSI firmware load specification

Currently, GSI firmware must be loaded for IPA before it can be
used--either by the modem, or by the AP.  New hardware supports a
third option, with the bootloader taking responsibility for loading
GSI firmware.  In that case, neither the AP nor the modem needs to
do that.

The first patch in this series deprecates the "modem-init" Device
Tree property in the IPA binding, using a new "qcom,gsi-loader"
property instead.  The second and third implement logic in the code
to support either the "old" or the "new" way of specifying how GSI
firmware is loaded.

The last two patches implement a new value for the "qcom,gsi-loader"
property.  If the value is "skip", neither the AP nor modem needs to
load the GSI firmware.  The first of these patches implements the
change in the IPA binding; the second implements it in the code.
====================

Link: https://lore.kernel.org/r/20221116073257.34010-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define a new value "skip" for the "qcom,gsi-loader" Device Tree
property.  If used, it indicates that neither the AP nor the modem
need to load GSI firmware (because it has already been loaded--for
example by the boot loader).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a new enumerated value to those defined for the qcom,gsi-loader
property.  If the qcom,gsi-loader is "skip", the GSI firmware will
already be loaded, so neither the AP nor modem is required to load
GSI firmware.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce a new way of specifying how the GSI firmware gets loaded
for IPA.  Currently, this is indicated by the presence or absence of
the Boolean "modem-init" Device Tree property.  The new property
must have a value--either "self" or "modem"--which indicates whether
the AP or modem is the GSI firmware loader, respectively.

For legacy systems, the new property will not exist, and the
"modem-init" property will be used.  For newer systems, the
"qcom,gsi-loader" property *must* exist, and must have one of the
two prescribed values.  It is an error to have both properties
defined, and it is an error for the new property to have an
unrecognized value.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The GSI layer used for IPA requires firmware to be loaded.

Currently either the AP or the modem loads the firmware,
distinguished by whether the "modem-init" Device Tree
property is defined.

Some newer systems implement a third option.  In preparation for
that, encapsulate the code that determines how the GSI firmware
gets loaded in a new function, ipa_firmware_loader().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

GSI firmware for IPA must be loaded during initialization, either by
the AP or by the modem.  The loader is currently specified based on
whether the Boolean modem-init property is present.

Instead, use a new property with an enumerated value to indicate
explicitly how GSI firmware gets loaded.  With this in place, a
third approach can be added in an upcoming patch.

The new qcom,gsi-loader property has two defined values:
  - self:   The AP loads GSI firmware
  - modem:  The modem loads GSI firmware
The modem-init property must still be supported, but is now marked
deprecated.

Update the example so it represents the SC7180 SoC, and provide
examples for the qcom,gsi-loader, memory-region, and firmware-name
properties.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move these two macros from net/sctp/sctp.h to linux/sctp.h, so that
it will be enough to include only linux/sctp.h in nft_exthdr.c and
xt_sctp.c. It should not include "net/sctp/sctp.h" if a module does
not have a dependence on SCTP module.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/ef6468a687f36da06f575c2131cd4612f6b7be88.1668526821.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently "net/sctp/checksum.h" including "net/sctp/sctp.h" is
included in quite some places in netfilter and openswitch and
net/sched. It's not necessary to include "net/sctp/sctp.h" if
a module does not have dependence on SCTP, "linux/sctp.h" is
the right one to include.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/ca7ea96d62a26732f0491153c3979dc1c0d8d34a.1668526793.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michal Wilczynski says:

====================
Implement devlink-rate API and extend it

This patch series implements devlink-rate for ice driver. Unfortunately
current API isn't flexible enough for our use case, so there is a need to
extend it. Some functions have been introduced to enable the driver to
export current Tx scheduling configuration.

Pasting justification for this series from commit implementing devlink-rate
in ice driver(that is a part of this series):

There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.

This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.

Example initial tree with 2 VF's:

[root@fedora ~]# devlink port function rate show
pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27

Let me visualize part of the tree:

                        +---------+
                        |  node_0 |
                        +---------+
                             |
                        +----v----+
                        | node_26 |
                        +----+----+
                             |
                        +----v----+
                        | node_27 |
                        +----+----+
                             |
                    |-----------------|
               +----v----+       +----v----+
               |   VF 1  |       |   VF 2  |
               +----+----+       +----+----+

So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.

[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
                 tx_max 5Gbps

This would cap the VF 1 BW to 5Gbps.

But let's say you would like to create a completely new branch.
This can be done like this:

[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
                 pci/0000:4b:00.0/1 parent node_custom_1

This creates a completely new branch and reassigns VF 1 to it.

A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.
====================

Link: https://lore.kernel.org/r/20221115104825.172668-1-michal.wilczynski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Provide documentation for newly introduced netlink attributes for
devlink-rate: tx_priority and tx_weight.

Mention the possibility to export tree from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ADQ, DCB might interfere with Custom Tx Scheduler changes that user
might introduce using devlink-rate API.

Check if ADQ, DCB is active, when user tries to change any setting
in exported Tx scheduler tree. If any of those are active block the user
from doing so, and log an appropriate message.

Remove the exported hierarchy if user enable ADQ or DCB.
Prevent ADQ or DCB from getting configured if user already made some
changes using devlink-rate API.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a need to support modification of Tx scheduler tree, in the
ice driver. This will allow user to control Tx settings of each node in
the internal hierarchy of nodes. As a result user will be able to use
Hierarchy QoS implemented entirely in the hardware.

This patch implemenents devlink-rate API. It also exports initial
default hierarchy. It's mostly dictated by the fact that the tree
can't be removed entirely, all we can do is enable the user to modify
it. For example root node shouldn't ever be removed, also nodes that
have children are off-limits.

Example initial tree with 2 VF's:

[root@fedora ~]# devlink port function rate show

pci/0000:4b:00.0/node_27: type node parent node_26
pci/0000:4b:00.0/node_26: type node parent node_0
pci/0000:4b:00.0/node_34: type node parent node_33
pci/0000:4b:00.0/node_33: type node parent node_32
pci/0000:4b:00.0/node_32: type node parent node_16
pci/0000:4b:00.0/node_19: type node parent node_18
pci/0000:4b:00.0/node_18: type node parent node_17
pci/0000:4b:00.0/node_17: type node parent node_16
pci/0000:4b:00.0/node_21: type node parent node_20
pci/0000:4b:00.0/node_20: type node parent node_3
pci/0000:4b:00.0/node_14: type node parent node_5
pci/0000:4b:00.0/node_5: type node parent node_3
pci/0000:4b:00.0/node_13: type node parent node_4
pci/0000:4b:00.0/node_12: type node parent node_4
pci/0000:4b:00.0/node_11: type node parent node_4
pci/0000:4b:00.0/node_10: type node parent node_4
pci/0000:4b:00.0/node_9: type node parent node_4
pci/0000:4b:00.0/node_8: type node parent node_4
pci/0000:4b:00.0/node_7: type node parent node_4
pci/0000:4b:00.0/node_6: type node parent node_4
pci/0000:4b:00.0/node_4: type node parent node_3
pci/0000:4b:00.0/node_3: type node parent node_16
pci/0000:4b:00.0/node_16: type node parent node_15
pci/0000:4b:00.0/node_15: type node parent node_0
pci/0000:4b:00.0/node_2: type node parent node_1
pci/0000:4b:00.0/node_1: type node parent node_0
pci/0000:4b:00.0/node_0: type node
pci/0000:4b:00.0/1: type leaf parent node_27
pci/0000:4b:00.0/2: type leaf parent node_27

Let me visualize part of the tree:

                    +---------+
                    |  node_0 |
                    +---------+
                         |
                    +----v----+
                    | node_26 |
                    +----+----+
                         |
                    +----v----+
                    | node_27 |
                    +----+----+
                         |
                |-----------------|
           +----v----+       +----v----+
           |   VF 1  |       |   VF 2  |
           +----+----+       +----+----+

So at this point there is a couple things that can be done.
For example we could only assign parameters to VF's.

[root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \
                 tx_max 5Gbps

This would cap the VF 1 BW to 5Gbps.

But let's say you would like to create a completely new branch.
This can be done like this:

[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom parent node_0
[root@fedora ~]# devlink port function rate add \
                 pci/0000:4b:00.0/node_custom_1 parent node_custom
[root@fedora ~]# devlink port function rate set \
                 pci/0000:4b:00.0/1 parent node_custom_1

This creates a completely new branch and reassigns VF 1 to it.

A number of parameters is supported per each node: tx_max, tx_share,
tx_priority and tx_weight.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink-rate API requires a priv object to be allocated when node still
doesn't have a parent. This is problematic, because ice_sched_node can't
be currently created without a parent.

Add an option to pre-allocate memory for ice_sched_node struct. Add
new arguments to ice_sched_add() and ice_sched_add_elems() that allow
for pre-allocation of memory for ice_sched_node struct.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To support new devlink-rate API ice_sched_node struct needs to store
a number of additional parameters. This includes tx_max, tx_share,
tx_weight, and tx_priority.

Add new fields to ice_sched_node struct. Add new functions to configure
the hardware with new parameters. Introduce new xarray to identify
nodes uniquely.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the driver is able to create leaf nodes for the devlink-rate,
but is unable to set parent for them. This wasn't as issue before the
possibility to export hierarchy from the driver. After adding the export
feature, in order for the driver to supply correct hierarchy, it's
necessary for it to be able to supply a parent name to
devl_rate_leaf_create().

Introduce a new parameter 'parent_name' in devl_rate_leaf_create().
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently it's not possible to reassign the parent of the node using one
command. As the previous commit introduced a way to export entire
hierarchy from the driver, being able to modify and reassign parents
become important. This way user might easily change QoS settings without
interrupting traffic.

Example command:
devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1

This reassigns leaf node parent to node_custom_1.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very
rigid and can't be easily removed. This requires an ability to export
default hierarchy to allow user to modify it. Currently the driver is
only able to create the 'leaf' nodes, which usually represent the vport.
This is not enough for HQoS implemented in Intel hardware.

Introduce new function devl_rate_node_create() that allows for creation
of the devlink-rate nodes from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_weight' needs to be introduced. This attribute allows
for usage of Weighted Fair Queuing arbitration scheme among siblings.
This arbitration scheme can be used simultaneously with the strict
priority.

Introduce new attribute in devlink-rate that will allow for configuration
of Weighted Fair Queueing. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_priority' needs to be introduced. This attribute allows
for usage of strict priority arbiter among siblings. This arbitration
scheme attempts to schedule nodes based on their priority as long as the
nodes remain within their bandwidth limit.

Introduce new attribute in devlink-rate that will allow for configuration
of strict priority. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Autoload DSA tagging driver when dynamically changing protocol

This patch set solves the issue reported by Michael and Heiko here:
https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
making full use of Michael's suggestion of having two modaliases: one
gets used for loading the tagging protocol when it's the default one
reported by the switch driver, the other gets loaded at user's request,
by name.

  # modinfo tag_ocelot
  filename:       /lib/modules/6.1.0-rc4+/kernel/net/dsa/tag_ocelot.ko
  license:        GPL v2
  alias:          dsa_tag:seville
  alias:          dsa_tag:id-21
  alias:          dsa_tag:ocelot
  alias:          dsa_tag:id-15
  depends:        dsa_core
  intree:         Y
  name:           tag_ocelot
  vermagic:       6.1.0-rc4+ SMP preempt mod_unload modversions aarch64

Tested on NXP LS1028A-RDB with the following device tree addition:

&mscc_felix_port4 {
	dsa-tag-protocol = "ocelot-8021q";
};

&mscc_felix_port5 {
	dsa-tag-protocol = "ocelot-8021q";
};

CONFIG_NET_DSA and everything that depends on it is built as module.
Everything auto-loads, and "cat /sys/class/net/eno2/dsa/tagging" shows
"ocelot-8021q". Traffic works as well. Furthermore, "echo ocelot-8021q"
into the aforementioned sysfs file now auto-loads the driver for it.
====================

Link: https://lore.kernel.org/r/20221115011847.2843127-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Issue a request_module() call when an attempt to change the tagging
protocol is made, either by sysfs or by device tree. In the case of
ocelot (the only driver for which the default and the alternative
tagging protocol are compiled as different modules), the user is now no
longer required to insert tag_ocelot_8021q.ko manually.

In the particular case of ocelot, this solves a problem where
tag_ocelot_8021q.ko is built as module, and this is present in the
device tree:

&mscc_felix_port4 {
	dsa-tag-protocol = "ocelot-8021q";
};

&mscc_felix_port5 {
	dsa-tag-protocol = "ocelot-8021q";
};

Because no one attempts to load the module into the kernel at boot time,
the switch driver will fail to probe (actually forever defer) until
someone manually inserts tag_ocelot_8021q.ko. This is now no longer
necessary and happens automatically.

Rename dsa_find_tagger_by_name() to denote the change in functionality:
there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we
also load the module if it's missing.

Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A future patch will introduce one more way of getting a reference on a
tagging protocl driver (by name). Rename the current method to "by_id".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both
with strings that contain \n at the end (echo ocelot > .../dsa/tagging)
and with strings that don't (printf ocelot > .../dsa/tagging).

There will be a problem once we'll want to construct the modalias string
based on which we auto-load the protocol kernel module. If the sysfs
buffer ends in a newline, we need to strip it first. This is a
preparatory patch specifically for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, tagging protocol drivers have a modalias of
"dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE.

This modalias makes it possible for the request_module() call in
dsa_tag_driver_get() to work, given the input it has - an integer
returned by ds->ops->get_tag_protocol().

It is also possible to change tagging protocols at (pseudo-)runtime, via
sysfs or via device tree, and this works via the name string of the
tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE).

In the latter case, there is no request_module() call, because there is
no association that the DSA core has between the string name and the ID,
to construct the modalias. The module is simply assumed to have been
inserted. This is actually slightly problematic when the tagging
protocol change should take place at probe time, since it's expected
that the dependency module should get autoloaded.

For this purpose, let's introduce a second modalias, so that the DSA
core can call request_module() by name. There is no reason to make the
modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER()
macro to take both the ID and the name as arguments, and generate two
modaliases behind the scenes.
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It's autumn cleanup time, and today's target are modaliases.

Michael says that for users of modinfo, "dsa_tag-20" is not the most
suggestive name, and recommends a change to "dsa_tag-id-20".

Andrew points out that other modaliases have a prefix delimited by
colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20".

To satisfy both proposals, Florian recommends "dsa_tag:id-20".

The modaliases are not stable ABI, and the essential information
(protocol ID) is still conveyed in the new string, which
request_module() must be adapted to form.

Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Michael Walle <michael@walle.cc>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The DSA tagging protocol driver macros are in the public include/net/dsa.h
probably because that's also where the DSA_TAG_PROTO_*_VALUE macros are
(MODULE_ALIAS_DSA_TAG_DRIVER hinges on those macro definitions).

But there is no reason to expose these helpers to <net/dsa.h>. That
header is shared between switch drivers (drivers/net/dsa/), tagging
protocol drivers (net/dsa/tag_*.c), the DSA core (net/dsa/ sans tag_*.c),
and the rest of the world (DSA master drivers, network stack, etc).
Too much exposure.

On the other hand, net/dsa/dsa_priv.h is included only by the DSA core
and by DSA tagging protocol drivers (or IOW, "friend" modules). Also a
bit too much exposure - I've contemplated creating a new header which is
only included by tagging protocol drivers, but completely separating a
new dsa_tag_proto.h from dsa_priv.h is not immediately trivial - for
example dsa_slave_to_port() is used both from the fast path and from the
control path.

So for now, move these definitions to dsa_priv.h which at least hides
them from the world.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

IPQ5018, IPQ6018 and IPQ8074 require clock-names to be set as driver is
requesting the clock based on it and not index, so document that and make
it required for the listed SoC-s.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114194734.3287854-4-robimarko@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>