- 29 Nov, 2023 7 commits
-
-
Krzysztof Kozlowski authored
Currently the Qualcomm Soundwire controller in its DAI startup op allocates the Soundwire stream runtime. This works fine for existing designs, but has limitations for stream runtimes with multiple controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840 speakers on two Soundwire controllers. When two Soundwire controllers are added to sound card codecs, Soundwire startup() is called twice, one for each Soundwire controller, and second execution overwrites what was set before. During shutdown() this causes double free. It is expected to have only one Soundwire stream runtime, thus it should be allocated from SoC soundcard context startup(), not from each Soundwire startup(). Such way will properly handle both cases: one and two Soundwire controllers in the stream runtime. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Newer Qualcomm SoC soundcards will need to allocate Soundwire stream runtime in their startup op. The code will be exactly the same for all soundcards, so add a helper for that. Signed-off-by:
-
Arnd Bergmann authored
SND_SOC_IMX_RPMSG gained a new dependency and gets selected by SND_SOC_FSL_RPMSG, which as a result needs to have the same dependency, or produce a build failure based on that: WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=y] && RPMSG [=y] && OF [=y] && I2C [=n] Selected by [y]: - SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && (SND_IMX_SOC [=y] || SND_IMX_SOC [=y]=n) && SND_IMX_SOC [=y]!=n x86_64-linux-ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe': imx-rpmsg.c:(.text+0x11e): undefined reference to `i2c_find_device_by_fwnode' Fixes: f83d38de ("ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231129113204.2869356-1-arnd@kernel.orgSigned-off-by:
-
Baofeng Tian authored
This module ID will be used for module performance automatic analysis for different modules, module name, module ID and module instance ID will be combined as a new generated ID for current module, this ID will be further used by analysis tools to identify current module. Take below case as example: 0x030006 gain.11.1 3 is module instance ID, 6 is module ID and gain.11.1 is module name. For pipeline widget print, keep as it is. Signed-off-by:
Baofeng Tian <baofeng.tian@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message and several spelling mistakes in comments. Fix them. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20231129090958.815775-1-colin.i.king@gmail.comSigned-off-by:
-
Peter Ujfalusi authored
With the added exception handling support if the firmware fails to boot up we are trying to do a panic dump from the telemetry slot. The slot offsets would have been configured only after receiving the FW_READY message which makes this panic dump unusable for early boot failures. With IPC4 the DSP window offsets are at standard places unlike IPC3 where the offsets needs to be queried from the FW_READY message. Move the offset configuration to sof_ipc4_init from the fw_ready handler. Signed-off-by:
-
Bard Liao authored
snd_sof_ipc_msg_data could return error. Signed-off-by:
-
- 28 Nov, 2023 3 commits
-
-
Kamil Duljas authored
trace_filter_parse() allocs memory for *out and when -ENOMEM is returned, caller function, dfsentry_trace_filter_write() trying to freed this memory. After this patch, the memory is freed in trace_filter_parse() before -EINVAL returned. In caller function removed kfree(elms) from error label Signed-off-by:
Kamil Duljas <kamil.duljas@gmail.com> Link: https://lore.kernel.org/r/20231116220102.2097-2-kamil.duljas@gmail.comSigned-off-by:
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: A small update for SDW machine support: Small fixes for sof_sdw machine driver Support for rt722 New TGL/MTL and LNL match for new configurations
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: SOF board updates for 6.8 including few small fix and the majority is to add generic helpers for codec, amp, BT offload, HDMI-In and DAI link generation among various machine drivers.
-
- 27 Nov, 2023 30 commits
-
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Current ASoC is supporting CPU/Codec = N:M (N < M) connection by using ch_map idea. This patch-set expands it that all connection uses this idea, and no longer N < M limit [1][2]. Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com [1] Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com [2] ASoC core code ([PATCH 1/5]) is same as v6 and it was tested by Pierre-Louis, and Jerome. Big change on v7 is basically for Audio-Graph-Card2.
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Signed-off-by:
Brent Lu <brent.lu@intel.com> Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Signed-off-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize dai_link and num_links of a snd_soc_card structure. Machine driver needs to initialize sof_card_private structure in driver probe function then board_helpers module will create entire DAI link array for this board. Signed-off-by:
-
Brent Lu authored
Use intel_board module for HDMI-In DAI link initialization. Signed-off-by:
Balamurugan C <balamurugan.c@intel.com> Signed-off-by:
-
Brent Lu authored
Use intel_board module for HDMI-In DAI link initialization. Signed-off-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize HDMI-In DAI link. Signed-off-by:
-
Brent Lu authored
Use bit mask to handle SSP port number of HDMI-In devices to simplify the code. No functional change in this patch. Signed-off-by:
-
Brent Lu authored
Use intel_board module for BT offload DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for BT offload DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for BT offload DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for BT offload DAI link initialization. Signed-off-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize BT offload DAI link. Signed-off-by:
-
Brent Lu authored
Rename the parameter 'ssp_codec' of sof_card_dai_links_create() since it's the port number of speaker amplifier. No functional change in this commit. Signed-off-by:
-
Brent Lu authored
Use intel_board module for speaker amplifier DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for speaker amplifier DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for speaker amplifier DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for speaker amplifier DAI link initialization. Signed-off-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize speaker amplifier DAI link. The function will initialize common fields and let caller to initialize codec-specific fields like codec, init, exit, and ops fields. Signed-off-by:
-
Brent Lu authored
Use intel_board module for headphone codec DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for headphone codec DAI link initialization. Signed-off-by:
-
Brent Lu authored
Use intel_board module for headphone codec DAI link initialization. Signed-off-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize headphone codec DAI links. The function will initialize common fields and let caller to initialize codec-specific fields like codec, init, exit, and ops fields. Signed-off-by:
-
Brent Lu authored
Add a helper function to get codec name string from codec type enum value. Signed-off-by:
-
Chao Song authored
Set codec sysclk could fail and return error, add error check for it. Signed-off-by:
-
Bard Liao authored
snd_soc_dai_set_tdm_slot() could return error. Signed-off-by:
-
Bard Liao authored
if (!strcmp(codec_dai->component->name, MAX_98373_DEV0_NAME)) and if (!strcmp(codec_dai->component->name, MAX_98373_DEV1_NAME)) can't be true at the same time. Add an else to clarify it. Signed-off-by:
-
Brent Lu authored
This patch fixes a dead code problem when calculating BE ID for each HDMI-In link. Signed-off-by:
-
Chao Song authored
This patch adds match table for rt722 codec on link 0. RT722 is a multi-function codec, three endpoints are created for its headset, amp and dmic functions. Signed-off-by:
-
Chao Song authored
This patch adds support for LNL RVP with Realtek Gen4.1 SDCA codec board, the codec layout is: SDW0: RT711 Headphone SDW1: RT714 DMIC SDW2: RT1316 Speaker SDW3: RT1316 Speaker Signed-off-by:
-
