- 27 Jan, 2022 12 commits
-
-
Tobias Waldekranz authored
This property has never been supported by the driver. The kernel has settled on "clock-frequency" as the standard name for this binding, so once that is supported we will document that instead. Fixes: 7f93c9d9 ("power/fsl: add MDIO dt binding for FMan") Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
xu xin authored
Different netns has different requirement on the setting of min_adv_mss sysctl which the advertised MSS will be never lower than. Enable min_adv_mss to be configured per network namespace. Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== net: mvneta: use .mac_select_pcs() This series converts mvneta to use the .mac_select_pcs() like eventually everything else will be. mvneta is slightly more involved because we need to rearrange the initialisation first to ensure everything required is initialised prior to phylink_create() being called. Tested locally on SolidRun Clearfog. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert mvneta to use the mac_select_interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually remove phylink_set_pcs(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Re-order the mvneta initialisation to move devm based resources and easy setup earlier in the probe function. The primary reason for this is to allow us to switch the driver to use phylink's mac_select_pcs() callback. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Robert Hancock says: ==================== at803x fiber/SFP support Add support for 1000Base-X fiber modes to the at803x PHY driver, as well as support for connecting a downstream SFP cage. Changes since v3: -Renamed some constants with OHM suffix for clarity Changes since v2: -fixed tabs/spaces issue in one patch Changes since v1: -moved page selection to config_init so it is handled properly after suspend/resume -added explicit check for empty sfp_support bitmask ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
Add support for downstream SFP cages for AR8031 and AR8033. This is primarily intended for fiber modules or direct-attach cables, however copper modules which work in 1000Base-X mode may also function. Such modules are allowed with a warning. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
Previously this driver always forced the copper page to be selected, however for AR8031 in 100Base-FX or 1000Base-X modes, the fiber page needs to be selected. Set the appropriate mode based on the hardware mode_cfg strap selection. Enable the appropriate interrupt bits to detect fiber-side link up or down events. Update config_aneg and read_status methods to use the appropriate Clause 37 calls when fiber mode is in use. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
The fix to select the copper page on AR8031 was being done in the probe function rather than config_init, so it would not be redone after resume from suspend. Move this to config_init so it is always redone when needed. Fixes: c329e5af ("net: phy: at803x: select correct page on config init") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
I forgot tcp had per netns tracking of timewait sockets, and their sysctl to change the limit. After 0dad4087 ("tcp/dccp: get rid of inet_twsk_purge()"), whole struct net can be freed before last tw socket is freed. We need to allocate a separate struct inet_timewait_death_row object per netns. tw_count becomes a refcount and gains associated debugging infrastructure. BUG: KASAN: use-after-free in inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 Read of size 8 at addr ffff88807d5f9f40 by task kworker/1:7/3690 CPU: 1 PID: 3690 Comm: kworker/1:7 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events pwq_unbound_release_workfn Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x67c/0xa30 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:lockdep_unregister_key+0x1c9/0x250 kernel/locking/lockdep.c:6328 Code: 00 00 00 48 89 ee e8 46 fd ff ff 4c 89 f7 e8 5e c9 ff ff e8 09 cc ff ff 9c 58 f6 c4 02 75 26 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c 41 5d 41 5e 41 5f e9 19 4a 08 00 0f 0b 5b 5d 41 5c 41 5d RSP: 0018:ffffc90004077cb8 EFLAGS: 00000206 RAX: 0000000000000046 RBX: ffff88807b61b498 RCX: 0000000000000001 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888077027128 R08: 0000000000000001 R09: ffffffff8f1ea4fc R10: fffffbfff1ff93ee R11: 000000000000af1e R12: 0000000000000246 R13: 0000000000000000 R14: ffffffff8ffc89b8 R15: ffffffff90157fb0 wq_unregister_lockdep kernel/workqueue.c:3508 [inline] pwq_unbound_release_workfn+0x254/0x340 kernel/workqueue.c:3746 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Allocated by task 3635: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:260 [inline] slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3230 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807d5f9a80 which belongs to the cache net_namespace of size 6528 The buggy address is located 1216 bytes inside of 6528-byte region [ffff88807d5f9a80, ffff88807d5fb400) The buggy address belongs to the page: page:ffffea0001f57e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d5f9a80 pfn:0x7d5f8 head:ffffea0001f57e00 order:3 compound_mapcount:0 compound_pincount:0 memcg:ffff888070023001 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffff888010dd4f48 ffffea0001404e08 ffff8880118fd000 raw: ffff88807d5f9a80 0000000000040002 00000001ffffffff ffff888070023001 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3634, ts 119694798460, free_ts 119693556950 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 skb_free_head net/core/skbuff.c:655 [inline] skb_release_data+0x65d/0x790 net/core/skbuff.c:677 skb_release_all net/core/skbuff.c:742 [inline] __kfree_skb net/core/skbuff.c:756 [inline] consume_skb net/core/skbuff.c:914 [inline] consume_skb+0xc2/0x160 net/core/skbuff.c:908 skb_free_datagram+0x1b/0x1f0 net/core/datagram.c:325 netlink_recvmsg+0x636/0xea0 net/netlink/af_netlink.c:1998 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d5f9e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5f9e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88807d5f9f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807d5f9f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5fa000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0dad4087 ("tcp/dccp: get rid of inet_twsk_purge()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
Paolo Abeni <pabeni@redhat.com> Tested-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220126180714.845362-1-eric.dumazet@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
Update comments to only use kdoc style comments, starting with '/**', for kdoc. Flagged by ./scripts/kernel-doc Signed-off-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220126090803.5582-1-simon.horman@corigine.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Corentin Labbe authored
Add ability of setting mac address in DT for cortina ethernet driver. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220125210811.54350-1-clabbe@baylibre.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 26 Jan, 2022 28 commits
-
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c:359:25: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum1_kvdl.c:229:24: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert the PCS selection to use mac_select_pcs, which allows the PCS to perform any validation it needs. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert dpaa2-mac to use the mac_select_pcs() interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually to remove phylink_set_pcs(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== net: axienet: modernise pcs implementation These two patches modernise the Xilinx axienet PCS implementation to use the phylink split PCS support. The first patch adds split PCS support and makes use of the newly introduced mac_select_pcs() function, which is the preferred way to conditionally attach a PCS. The second patch cleans up the use of mdiobus_write() since we now have bus accessors for mdio devices. There should be no functional change to the driver. This series was previously sent CFT on the 16th December (message ID Ybs1cdM3KUTsq4Vx@shell.armlinux.org.uk), and feedback addressed. CFT v2 sent 4th January (message ID YdQlI8gcVwg2sR+5@shell.armlinux.org.uk). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Commit 0ebecb26 ("net: mdio: Add helper functions for accessing MDIO devices") added support for mdiodev accessor operations that neatly wrap the mdiobus accessor operations. Since we are dealing with a mdio device here, update the driver to use mdiodev_write(). Tested-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert axienet to use the phylink_pcs layer, resulting in it no longer being a legacy driver. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Add RTC mode for PTP This series adds Real Time Clock (RTC) mode for PTP timestamping. In RTC mode, the 64-bit time value is programmed into the NIC's PTP hardware clock (PHC). Prior to this, the PHC is running as a free counter. For example, in multi-function environment, we need to run PTP in RTC mode. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavan Chebbi authored
In Multi-host environment, when the PHC is updated by one host, an async message from firmware will be sent to other hosts. Re-initialize the timecounter when the driver receives this async message. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavan Chebbi authored
The adjusted time is set in the PHC in RTC mode. We also need to update the snapshots ptp->current_time and ptp->old_time when the time is adjusted. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavan Chebbi authored
Add support for RTC mode if it is supported by firmware. In RTC mode, the PHC is set to the 64-bit clock. Because the legacy interface is 48-bit, the driver still has to keep track of the upper 16 bits and handle the rollover. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavan Chebbi authored
Making the ptp free and timecounter initialization code into separate functions so that later patches can use them. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The main changes are PTP support for RTC, additional NVM error codes, backing store v2 firmware APIs. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== net: stmmac/xpcs: modernise PCS support This series updates xpcs and stmmac for the recent changes to phylink to better support split PCS and to get rid of private MAC validation functions. This series is slightly more involved than other conversions as stmmac has already had optional proper split PCS support. The first six patches of this series were originally posted on 16th December for CFT, and Wong Vee Khee reported his Intel Elkhart Lake setup was fine the first six these. However, no tested-by was given. The patches: 1) Provide a function to query the xpcs for the interface modes that are supported. 2) Populates the MAC capabilities and switches stmmac_validate() to use phylink_get_linkmodes(). We do not use phylink_generic_validate() yet as (a) we do not always have the supported interfaces populated, and (b) the existing code does not restrict based on interface. There should be no functional effect from this patch. 3) Populates phylink's supported interfaces from the xpcs when the xpcs is configured by firmware and also the firmware configured interface mode. Note: this will restrict stmmac to only supporting these interfaces modes - stmmac maintainers need to verify that this behaviour is acceptable. 4) stmmac_validate() tail-calls xpcs_validate(), but we don't need it to now that PCS have their own validation method. Convert stmmac and xpcs to use this method instead. 5) xpcs sets the poll field of phylink_pcs to true, meaning xpcs requires its status to be polled. There is no need to also set the phylink_config.pcs_poll. Remove this. 6) Switch to phylink_generic_validate(). This is probably the most contravertial change in this patch set as this will cause the MAC to restrict link modes based on the interface mode. From an inspection of the xpcs driver, this should be safe, as XPCS only further restricts the link modes to a subset of these (whether that is correct or not is not an issue I am addressing here.) For implementations that do not use xpcs, this is a more open question and needs feedback from stmmac maintainers. 7) Convert to use mac_select_pcs() rather than phylink_set_pcs() to set the PCS - the intention is to eventually remove phylink_set_pcs() once there are no more users of this. v2: fix signoff and temporary warning in patch 4 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert stmmac to use the mac_select_pcs() interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually to remove phylink_set_pcs(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Convert stmmac to use phylink_generic_validate() now that we have the MAC capabilities and supported interfaces filled in, and we have the PCS validation handled via the PCS operations. Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Phylink will use PCS polling whenever the PCS's poll member is set, so setting phylink_config.pcs_poll as well is redundant. Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
stmmac explicitly calls the xpcs driver to validate the ethtool linkmodes. This is no longer necessary as phylink now supports validation through a PCS method. Convert both drivers to use this new mechanism. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Fill in phylink's supported_interfaces bitmap with the PHY interface modes which can be used to talk to the PHY. We indicate that the PHY interface mode passed in platform data is always supported, as this is the initial mode passed into phylink. When there is no PCS specified, we assume that this is the only mode that is supported - indeed, the driver appears not to support dynamic switching of interface types at present. When a xpcs is present, it defines the PHY interface modes that the stmmac driver can support. Request the supported interfaces from the xpcs driver, and pass them to phylink. Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Add the MAC speed, duplex and pause capabilities to the phylink_config structure, and switch stmmac_validate() to use phylink_get_linkmodes() to generate the mask of supported ethtool link modes. Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Add a function to the xpcs driver to retrieve the supported PHY interface modes, which can be used by drivers to fill in phylink's supported_interfaces mask. We validate the interface bit index to ensure that it fits within the bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry. Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add RJ45 ports support We are in the process of qualifying a new system that has RJ45 ports as opposed to the transceiver modules (e.g., SFP, QSFP) present on all existing systems. This patchset adds support for these ports in mlxsw by adding a couple of missing BaseT link modes and rejecting ethtool operations that are specific to transceiver modules. Patchset overview: Patches #1-#3 are cleanups and preparations. Patch #4 adds support for two new link modes. Patches #5-#6 query and cache the port module's type (e.g., QSFP, RJ45) during initialization. Patches #7-#9 forbid ethtool operations that are invalid on RJ45 ports. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
Transceiver module reset through 'rst' field in PMAOS register is not supported on RJ45 ports, so module reset should be rejected. Therefore, before trying to access this field, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Output example: # ethtool --reset swp11 phy ETHTOOL_RESET 0x40 Cannot issue ETHTOOL_RESET: Invalid argument $ dmesg mlxsw_spectrum 0000:03:00.0 swp11: Reset module is not supported on port module type Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
PMMP (Port Module Memory Map Properties) and MCION (Management Cable IO and Notifications) registers are not supported on RJ45 ports, so setting and getting power mode should be rejected. Therefore, before trying to access those registers, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Set output example: # ethtool --set-module swp1 power-mode-policy auto netlink error: mlxsw_core: Power mode is not supported on port module type netlink error: Invalid argument Get output example: $ ethtool --show-module swp11 netlink error: mlxsw_core: Power mode is not supported on port module type netlink error: Invalid argument Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
MCIA (Management Cable Info Access) register is not supported on RJ45 ports, so getting module EEPROM should be rejected. Therefore, before trying to access this register, validate the port module type that was queried during initialization and return an error to user space in case the port module type is RJ45 (twisted pair). Examples for output when trying to get EEPROM module: Using netlink: # ethtool -m swp1 netlink error: mlxsw_core: EEPROM is not equipped on port module type netlink error: Invalid argument Using IOCTL: # ethtool -m swp1 Cannot get module EEPROM information: Invalid argument $ dmesg mlxsw_spectrum 0000:03:00.0 swp1: EEPROM is not equipped on port module type Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
Query and store port module's type during initialization so that it could be later used to determine if certain configurations are allowed based on the type. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
Add the Port Module Type Mapping (PMTP) register. It will be used by subsequent patches to query port module types and forbid certain configurations based on the port module's type. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
As part of a process for supporting a new system with RJ45 connectors, 100BaseT and 1000BaseT link modes need to be supported. Add support for these two link modes by adding the two corresponding bits in PTYS (Port Type and Speed) register. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-