cmd-db and rpmh-rsc are used by clients like regulators, interconnects and
clocks for resource voting. These clients are in core_initcall() while
cmd-db and rpmh-rsc are in arch_initcall(). Update init level for these
drivers also to core_initcall() to avoid unnecessary probe defer during
boot up.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240217-init_level-v1-1-bde9e11f8317@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240309072825.45385-1-wangkaiyuan@inspur.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Since the qcom_scm_probe() function returns with an error if
__scm->path contains an error pointer, it is not needed to
verify that again in the qcom_scm_bw_{en,dis}able() functions
so remove the superfluous IS_ERR() checks.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240308-qcom_scm-is_err-check-v1-1-9c3e1ceefafe@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

There are several functions which are calling qcom_scm_bw_enable()
then returns immediately if the call fails and leaves the clocks
enabled.

Change the code of these functions to disable clocks when the
qcom_scm_bw_enable() call fails. This also fixes a possible dma
buffer leak in the qcom_scm_pas_init_image() function.

Compile tested only due to lack of hardware with interconnect
support.

Cc: stable@vger.kernel.org
Fixes: 65b7ebda ("firmware: qcom_scm: Add bw voting support to the SCM interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240304-qcom-scm-disable-clk-v1-1-b36e51577ca1@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add missing kerneldoc to silence:

  qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_root' not described in 'qmp'
  qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_files' not described in 'qmp'

Fixes: d51d984c ("soc: qcom: aoss: Add debugfs interface for sending messages")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Drop description of non-existing 'struct geni_wrapper' member:

  qcom-geni-se.c:99: warning: Excess struct member 'to_core' description in 'geni_wrapper'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The newly added code causes a build failure when -Werror is set:

drivers/soc/qcom/spm.c:388:12: error: 'spm_get_cpu' defined but not used [-Werror=unused-function]

Remove the #ifdef and instead use an IS_ENABLED() check that lets the
compiler perform dead code elimination instead of the preprocessor.

Fixes: 6496dba1 ("soc: qcom: spm: add support for voltage regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240221154457.2007420-1-arnd@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the compatible for the SAW2 for L2 cache found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8226-cpu-v2-1-5d9cb4c35204@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The SPM / SAW2 device also provides a voltage regulator functionality
with optional AVS (Adaptive Voltage Scaling) support. The exact register
sequence and voltage ranges differs from device to device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-5-0472ec237f49@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The SAW2 device can optionally provide a voltage regulator supplying the
CPU core, cluster or L2 cache. Change the boolean 'regulator' property
into a proper regulator description. This breaks schema compatibility
for the sake of properly describing the regulator.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-3-0472ec237f49@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Define compatible strings for SAW2 units present on MSM8960, IPQ4019
and IPQ8064.  There is no need to include SAW version into the compat
string, so just use the SoC and SAW2 kind.

Also add missing L2 SAW2 compatibles for MSM8974 and APQ8084, they
follow the existing CPU SAW2 strings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-2-0472ec237f49@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The Qualcomm SPM / SAW2 device is described in two bindigns files:
arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into
the latter, adding detailed device node description. While we are at it,
also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual
compatible used for these devices.

The regulator property is retained as is. It will be changed in the
later patches.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-1-0472ec237f49@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Commit c72ca343 ("soc: qcom: llcc: Add v4.1 HW version support")
introduced a new 4.1 if statement in llcc_update_act_ctrl() without
considering that ret might be overwritten. So, add return value check
after Broadcast_OR register read in llcc_update_act_ctrl().

Fixes: c72ca343 ("soc: qcom: llcc: Add v4.1 HW version support")
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240212183515.433873-1-quic_uchalich@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add Soc ID table entries for Qualcomm SM8475 family.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212201428.87151-3-danila@jiaxyga.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add Qualcomm SM8475/SM8475P/SM8475_2 (cape) SoC IDs.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212201428.87151-2-danila@jiaxyga.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Since commit d492cc25 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the aprbus variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240213-bus_cleanup-apr-v1-1-50c824eec06d@marliere.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the X1E80100 compatible used to describe the pmic glink
on this platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240129-x1e80100-pmic-glink-v1-1-e45cf194b964@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge PBS driver through topic branch, to also allow it be merged
through the LED subsystem.

Add the Qualcomm PBS (Programmable Boot Sequencer) driver. The QCOM PBS
driver supports configuring software PBS trigger events through PBS RAM
on Qualcomm Technologies, Inc (QTI) PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20240201204421.16992-6-quic_amelende@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add binding for the Qualcomm Programmable Boot Sequencer device.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240201204421.16992-4-quic_amelende@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

On SA8295P and SA8540P gfx.lvl is not provdied by rpmh, but rather is
handled by an external regulator (max20411). Drop gfx.lvl from the list
of power-domains exposed on this platform.

Fixes: f68f1cb3 ("soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-4-7011c2a63037@quicinc.comSigned-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>

It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.

Fixes: 082f9bc6 ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs")
Fixes: 112d96fd ("soc: qcom: socinfo: Add some PMICs")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add tracepoint for tracing the messages being sent and the success
thereof. This is useful as the system has a variety of clients sending
requests to the always-on subsystem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240123-qcom-aoss-tracepoints-v2-1-bd73baa31977@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add SoC Info support for QCM8550 and QCS8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240119100621.11788-4-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the ID for the Qualcomm QCM8550 and QCS8550 SoC, QCS8550 is a QCS
version of QCM8550.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240119100621.11788-3-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

In addition to the normal runtime commands, the Always On Processor
(AOP) provides a number of debug commands which can be used during
system debugging for things such as preventing power collapse or placing
floor votes for certain resources. Some of these are documented in the
Robotics RB5 "Debug AOP ADB" linked below.

Provide a debugfs interface for the developer/tester to send some of
these commands to the AOP, which allow the user to override the DDR
frequency, preventing power collapse of cx and ddr, and prevent AOSS
from going to sleep.

Link: https://docs.qualcomm.com/bundle/publicresource/topics/80-88500-3/85_Debugging_AOP_ADB.htmlSigned-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240117-qcom-aoss-debugfs-v2-v3-1-1aa779124822@quicinc.com
[bjorn: Dropped S_IWGRP from the debugfs files]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

During an SSR(Sub-System Restart) process, the remoteproc driver will
try to read the crash reason from SMEM. The qcom_smem_get() backing such
operations does however take the hwspinlock (tcsr mutex), which might be
held by the dying remoteproc.

The associated timeout on the hwspin_lock_timeout_irqsave() would take
care of the system not hanging forever, but the get operation will fail,
unnecessarily delaying the process for the 'HWSPINLOCK_TIMEOUT' duration
(currently is '1s'), and finally resulting in failure to get crash
information from SMEM.

This timeout can be avoided by removing the hwspinlock in the
qcom_smem_get routine. SMEM ensures that the allocated item will only be
visible after the new item is safe to use by following a specific order
of updates.

In the private partition case, qcom_smem_get_private() will use
'offset_free_uncached' as a loop boundary when looking for existing
allocated items. The corresponding allocation will only update
offset_free_uncached once the item is fully initialized.

    hdr->canary = SMEM_PRIVATE_CANARY;
    hdr->item = cpu_to_le16(item);
    hdr->size = cpu_to_le32(ALIGN(size, 8));
    hdr->padding_data = cpu_to_le16(le32_to_cpu(hdr->size) - size);
    hdr->padding_hdr = 0;

    wmb();
    le32_add_cpu(&phdr->offset_free_uncached, alloc_size);

The global partition is similar but uses the "entry->allocated" variable
to ensure the item is not visible to qcom_smem_get_global().
Signed-off-by: Tao Zhang <quic_taozhan@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240102022512.999635-1-quic_taozhan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "qcom,rpm-msg-ram" is
the former and needs to constrain each entry to a single phandle value.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190744.1554625-1-robh@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Use the documented notation for nested struct members.
Add a Return: comment for qcom_smp2p_intr().

These changes prevent these kernel-doc warnings:

smp2p.c:78: warning: Excess struct member 'name' description in 'smp2p_smem_item'
smp2p.c:78: warning: Excess struct member 'value' description in 'smp2p_smem_item'
smp2p.c:280: warning: No description found for return value of 'qcom_smp2p_intr'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240123053329.12893-1-rdunlap@infradead.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

As reported by lkp, qmp_send() would benefit from a __printf() marker to
allow the compiler to further validate the passed parameters, fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401100855.UYl3HPPt-lkp@intel.com/Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240119-aoss-printf-annotation-v1-1-27e2ceb8937a@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>