- 23 Nov, 2015 1 commit
-
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 20 Nov, 2015 2 commits
-
-
Imre Deak authored
There are platforms that don't need the full GMBUS power domain (BXT) while others do (PCH, VLV/CHV). For optimizing this we would need to add a new power domain, but it's not clear how much we would benefit given the short time we hold the reference. So for now let's keep things simple. v2: - fix commit message, PCH won't take any redundant power resource after this change (Ville) Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [fix commit message in v2 (Imre)] Link: http://patchwork.freedesktop.org/patch/msgid/1447959301-1263-2-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Suggested by Ville. Signed-off-by:
-
- 19 Nov, 2015 8 commits
-
-
Lukas Wunner authored
Currently if intelfb_create() errors out, it unrefs the bo even though the fb now owns that reference. (Spotted by Ville Syrjälä.) We should unref the fb instead of the bo. However the fb was not necessarily allocated by intelfb_create(), it could be inherited from BIOS (the fb struct was then allocated by dev_priv->display.get_initial_plane_config()) and be in active use by a crtc. In this case we should call drm_framebuffer_remove() instead of _unreference() to also disable the crtc. Daniel Vetter suggested that "fbdev teardown code will take care of it. The correct approach is probably to not unref anything at all". But if fbdev initialization fails, the fbdev isn't torn down and occupies memory even though it's unusable. Therefore clobber it in intel_fbdev_initial_config(). (Currently we ignore a negative return value there.) The idea is that if fbdev initialization fails, the driver behaves as if CONFIG_DRM_FBDEV_EMULATION wasn't set. Should X11 manage to start up without errors, it will at least be able to use the memory that would otherwise be hogged by the unusable fbdev. Also, log errors in intelfb_create(). Don't call async_synchronize_full() in intel_fbdev_fini() when called from intel_fbdev_initial_config() to avoid deadlock. v2: Instead of calling drm_framebuffer_unreference() (if fb was not inherited from BIOS), call intel_fbdev_fini(). v3: Rebase on e00bf696 (drm/i915: Move the fbdev async_schedule() into intel_fbdev.c), call async_synchronize_full() conditionally instead of moving it into i915_driver_unload(). Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:Lukas Wunner <lukas@wunner.de> Link: http://patchwork.freedesktop.org/patch/msgid/49ce5f0daead24b7598ec78591731046c333c18d.1447938059.git.lukas@wunner.deSigned-off-by:
-
Lukas Wunner authored
Introduced by 84b233ad ("workqueue: implement current_is_async()"). Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Arun Siluvery authored
This reverts commit 2e5356da. It is now redundant as it is already covered in below commit which introduced the changes to reuse initialization of resources in resume/reset path. commit e84fe803 Author: Nick Hoath <nicholas.hoath@intel.com> Date: Fri Sep 11 12:53:46 2015 +0100 drm/i915: Split alloc from init for lrc lrc_setup_hardware_status_page() in the same function gen8_init_common_ring() takes care of this. Cc: Nick Hoath <nicholas.hoath@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447951664-9347-1-git-send-email-arun.siluvery@linux.intel.comSigned-off-by:
-
Lukas Wunner authored
intelfb_create() is called once on driver initialization. If it fails, ifbdev->helper.fbdev, ifbdev->fb or ifbdev->fb->obj may be NULL. Further up in the call stack, intel_fbdev_initial_config() calls intel_fbdev_fini() to tear down the ifbdev on failure. This calls intel_fbdev_destroy() which dereferences ifbdev->fb. Fix the ensuing oops. Also check in these functions if ifbdev is not NULL to avoid oops: i915_gem_framebuffer_info() is called on access to debugfs file "i915_gem_framebuffer" and dereferences ifbdev, ifbdev->helper.fb and ifbdev->helper.fb->obj. intel_connector_add_to_fbdev() / intel_connector_remove_from_fbdev() are called when registering / unregistering an mst connector and dereference ifbdev. v3: Drop additional null pointer checks in intel_fbdev_set_suspend(), intel_fbdev_output_poll_changed() and intel_fbdev_restore_mode() since they already check if ifbdev is not NULL, which is sufficient now that intel_fbdev_fini() is called on initialization failure. (Requested by Daniel Vetter <daniel.vetter@ffwll.ch>) Signed-off-by: -
Daniel Vetter authored
The rotated view depends upon the rotation paramters, but thus far we didn't bother checking for those. This seems to have been an issue ever since this was introduce in commit fe14d5f4 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Wed Dec 10 17:27:58 2014 +0000 drm/i915: Infrastructure for supporting different GGTT views per object But userspace is allowed to reuse framebuffer backing storage with different framebuffers with different pixel formats/stride/whatever. And e.g. SNA indeed does this. Hence we must check for all the paramters to match, not just that it's rotated. v2: intel_plane_obj_offset also needs to construct the full view, to avoid fallout since they don't fully match. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1444834266-12689-3-git-send-email-daniel.vetter@ffwll.chReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
We don't need 2 separate unions. Note that this was done intentinoally Author: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Date: Wed May 6 14:35:38 2015 +0300 drm/i915: Add a partial GGTT view type on Tvrtko's request, but without a clear justification. Rotated views are also not checking for matching paramters in i915_ggtt_view_equal, which seems like a bug. But this patch here doesn't change that. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: -
Daniel Vetter authored
It can't fail and there's even a WARN_ON suggesting that if it would, it would be a disaster. Correct this to make things less confusing. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Namrta Salonie authored
Found by static analysis tool. Signed-off-by:Namrta Salonie <namrta.salonie@intel.com> Signed-off-by:
-
- 18 Nov, 2015 29 commits
-
-
Imre Deak authored
MISSING_CASE() would have been useful to track down a recent problem in intel_display_port_aux_power_domain(), so add it there and a few related helpers. This was also suggested by Ville in his review of the latest DMC/DC changes, we forgot to address that. Signed-off-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447855045-7109-2-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Due to the current sharing of the DDI encoder between DP and HDMI connectors we can run the DP detection after the HDMI detection has already set the shared encoder's type. For now solve this keeping the current behavior and running the detection in this case too. For a proper solution Ville suggested to split the encoder into an HDMI and DP one, that can be done as a follow-up. This issue triggers the WARN in intel_display_port_aux_power_domain() and was introduced in: commit 25f78f58 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Nov 16 15:01:04 2015 +0100 drm/i915: Clean up AUX power domain handling CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
Their logic is exactly the same: check if the digital port is connected and then call intel_dp_detect_dpcd(). So just put that logic in their only caller: intel_dp_detect(). Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
That call was moved to intel_dp_detect() in commit d410b56d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Sep 2 20:03:59 2014 +0100 drm/i915/dp: Refactor common eDP lid detection but it seem to have been resurrected in the following commit, probably due to a wrong merge conflict resolution. commit 2a592bec Author: Dave Airlie <airlied@redhat.com> Date: Mon Sep 1 16:58:12 2014 +1000 drm/i915: handle G45/GM45 pulse detection connected state. Signed-off-by:
-
Rodrigo Vivi authored
On the commit 3301d409 ("drm/i915: PSR: Fix DP_PSR_NO_TRAIN_ON_EXIT logic")' we already had identified that DP_PSR_NO_TRAIN_ON_EXIT doesn't mean we shouldn't send TPS patterns, however we start sending the minimal TP1 as possible and no TP2. For most of the panels this is ok, but we found a reported case where this is not true and panel keeps frozen without updating the screen for a while. We could just get this case after patch "PSR: Don't Skip aux handshake on DP_PSR_NO_TRAIN_ON_EXIT." is applied since that one fix the hard freeze on this kind of panels. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=91436#c19 Cc: Ivan Mitev <ivan.mitev@gmail.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Since the beginning there is a confusion on the meaning of this bit. A previous patch had identified this already and fixed it partially: 'commit 3301d409 ("drm/i915: PSR: Fix DP_PSR_NO_TRAIN_ON_EXIT logic") DP_PSR_NO_TRAIN_ON_EXIT means the source doesn't need to do the training, but it doesn't tell to avoid TP patterns or to skip aux handshake. This patch fixes the hard freeze reported. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=91436 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=91437 Cc: Ivan Mitev <ivan.mitev@gmail.com> Signed-off-by:
-
Rodrigo Vivi authored
With 'commit 30886c5a ("drm/i915: VLV/CHV PSR: Increase wait delay time before active PSR.")' we fixed a blank screen when first activation was happening immediately after PSR being enabled. There we gave more time for idleness by increasing the delay between re-activating sequences. However, commit "drm/i915: Delay first PSR activation." delay the first activation in a better way keeping a good PSR residency. So, we can now reduce the delay on re-enable. Signed-off-by:
-
Rodrigo Vivi authored
When debuging the frozen screen caused by HW tracking with low power state I noticed that if we keep moving the mouse non stop you will miss the screen updates for a while. At least until we stop moving the mouse for a small time and move again. The actual enabling should happen immediately after Display Port enabling sequence finished with links trained and everything enabled. However we face many issues when enabling PSR right after a modeset. On VLV/CHV we face blank screens on this scenario and on HSW+ we face a recoverable frozen screen, at least until next exit-activate sequence. Another workaround for the same issue here would be to increase re-enable idle time from 100 to 500 as we did for VLV/CHV. However this patch workaround this issue in a better way since it doesn't reduce PSR residency and also allow us to reduce the delay time between re-enables at least on VLV/CHV. This is also important to make the sysfs toggle working properly. Signed-off-by:
-
Ville Syrjälä authored
Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Add 'u32 offset' to the uncore register access functions. For now it's the same as 'reg', but once type safety gets added 'reg' will be the type safe register variable and 'offset' the raw offset. v2: s/uint32_t/u32/ (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
I need to add a new variable into GEN6_{READ,WRITE}_HEADER, but the vgpu won't need it, so let's avoid an unused variable warning by splitting the vgpu stuff to use its own macros. Cc: Eddie Dong <eddie.dong@intel.com> Cc: Jike Song <jike.song@intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:Zhiyuan Lv <zhiyuan.lv@intel.com>
-
Ville Syrjälä authored
We'll want to avoid performing arithmetic with register offsets, so instead calculating the vgpu PDP as pdp0_lo+offset, make the PDPs into an array. This way we can simply loop through them. Cc: Eddie Dong <eddie.dong@intel.com> Cc: Jike Song <jike.song@intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We set up a load of LRIs in the logical ring context. Wrap that stuff in a macro to avoid typos with position of each reg/value pair in the context. This also makes it easier to make the register defines type safe. Signed-off-by:
-
Ville Syrjälä authored
The logical render context population has a bunch of raw ring register offsets. Use the names we have for them, and in cases where we we don't, give them names. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Add a helper for emitting register offsets (for LRI/SRM) into the w/a batch buffer. Signed-off-by:
-
Ville Syrjälä authored
When register type safety happens, we can't just try to emit the register itself to the ring. Instead we'll need to extract the offset from it first. Add some convenience functions that will do that. v2: Convert MOCS setup too Signed-off-by:
-
Ville Syrjälä authored
Add defines for the upper halves of the registers used by the cmd parser. Getting rid of the arithmetic with the register offset will help in making registers type safe. v2: s/_HI/_UDW/ (Chris) Signed-off-by:
-
Ville Syrjälä authored
Store the upper dword of the register offset in the whitelist as well. This would allow it to read register where the two halves aren't sitting right next to each other, and it'll make it easier to make register access type safe. While at it change the register offsets to u32 from u64. Our register space isn't quite that big, yet :) v2: Use ldw/udw as the suffixes, and add a note about 64bit wide split regs (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Ville Syrjälä authored
Use the RING_PSMI_CTL define insted of hand rolling the register offset. Signed-off-by:
-
Ville Syrjälä authored
v2: Use for_each_ring() (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francisco Jerez <currojerez@riseup.net> Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Most of our register defines follow the convention that if there's a need for the raw register offset, that one has an underscore sa a prefix. The define (possibly parametrized) without the underscore is the one people should normally use, since it will take into account all the parameters and other potential offsets that are needed. Fix up the few stragglers that don't follow this convention. Signed-off-by:
-
Ville Syrjälä authored
If we ignore the BXT situation, we can observe that the only variables affecting gpio_mmio_base is IS_VALLEVIEW and HAS_GMCH_DISPLAY. The BXT situation we can fit into the same pattern if we change gmbus_pins_bxt[] to house the GMCH GPIO register offsets (like we do for all other platfotms). So let's do that. We could even simplify the VLV situation more by including the display_mmio_offset in the GPIO register defines, but let's leave it be for now. Signed-off-by:
-
Ville Syrjälä authored
Store the DVO SRCDIM register offset alongside the DVO control register offset in intel_dvo_device. This gets rid of the switch statement whose case values are the DVO control register offsets. Such a construct would cause problems for register type safety. Signed-off-by:
-
Ville Syrjälä authored
Replace the is_sdvob bool and some sdvo_reg checks with enum port. This makes the SDVO code look more modern, and gets rid of explicit register offset checks in the code which will hamper register type checking. v2: Add assert_sdvo_port_valid() (Chris) Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
i915 register defines are going to become type safe, so going forward the register defines can't be used as straight numbers. Since quirks.c needs just a few extra register defines from i915_reg.h, decouple the two by defining the required registers locally in quirks.c. This was already done for a few other igpu related registers. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
