No driver uses this interface any more, so remove it.

Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch introduces helper of blk_mq_hw_queue_first_cpu() for
figuring out the hctx's first cpu, and code duplication can be
avoided.

Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch figures out the final selected CPU, then writes
it to hctx->next_cpu once, then we can avoid to intermediate
next cpu observed from other dispatch paths.

Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

From commit 4b855ad3 ("blk-mq: Create hctx for each present CPU),
blk-mq doesn't remap queue after CPU topo is changed, that said when
some of these offline CPUs become online, they are still mapped to
hctx 0, then hctx 0 may become the bottleneck of IO dispatch and
completion.

This patch sets up the mapping from the beginning, and aligns to
queue mapping for PCI device (blk_mq_pci_map_queues()).

Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
Fixes: 4b855ad3 ("blk-mq: Create hctx for each present CPU)
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

From commit 20e4d813 (blk-mq: simplify queue mapping & schedule
with each possisble CPU), one hctx can be mapped from all offline CPUs,
then hctx->next_cpu can be set as wrong.

This patch fixes this issue by making hctx->next_cpu pointing to the
first CPU in hctx->cpumask if all CPUs in hctx->cpumask are offline.

Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Fixes: 20e4d813 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit 2d1d4c1e made loop_get_status() drop lo_ctx_mutex before
returning, but the loop_get_status_old(), loop_get_status64(), and
loop_get_status_compat() wrappers don't call loop_get_status() if the
passed argument is NULL. The callers expect that the lock is dropped, so
make sure we drop it in that case, too.

Reported-by: syzbot+31e8daa8b3fc129e75f2@syzkaller.appspotmail.com
Fixes: 2d1d4c1e ("loop: don't call into filesystem while holding lo_ctl_mutex")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzbot is reporting deadlocks at __blkdev_get() [1].

----------------------------------------
[   92.493919] systemd-udevd   D12696   525      1 0x00000000
[   92.495891] Call Trace:
[   92.501560]  schedule+0x23/0x80
[   92.502923]  schedule_preempt_disabled+0x5/0x10
[   92.504645]  __mutex_lock+0x416/0x9e0
[   92.510760]  __blkdev_get+0x73/0x4f0
[   92.512220]  blkdev_get+0x12e/0x390
[   92.518151]  do_dentry_open+0x1c3/0x2f0
[   92.519815]  path_openat+0x5d9/0xdc0
[   92.521437]  do_filp_open+0x7d/0xf0
[   92.527365]  do_sys_open+0x1b8/0x250
[   92.528831]  do_syscall_64+0x6e/0x270
[   92.530341]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[   92.931922] 1 lock held by systemd-udevd/525:
[   92.933642]  #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0
----------------------------------------

The reason of deadlock turned out that wait_event_interruptible() in
blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put()
due to q->mq_freeze_depth == 1.

----------------------------------------
[   92.787172] a.out           S12584   634    633 0x80000002
[   92.789120] Call Trace:
[   92.796693]  schedule+0x23/0x80
[   92.797994]  blk_queue_enter+0x3cb/0x540
[   92.803272]  generic_make_request+0xf0/0x3d0
[   92.807970]  submit_bio+0x67/0x130
[   92.810928]  submit_bh_wbc+0x15e/0x190
[   92.812461]  __block_write_full_page+0x218/0x460
[   92.815792]  __writepage+0x11/0x50
[   92.817209]  write_cache_pages+0x1ae/0x3d0
[   92.825585]  generic_writepages+0x5a/0x90
[   92.831865]  do_writepages+0x43/0xd0
[   92.836972]  __filemap_fdatawrite_range+0xc1/0x100
[   92.838788]  filemap_write_and_wait+0x24/0x70
[   92.840491]  __blkdev_put+0x69/0x1e0
[   92.841949]  blkdev_close+0x16/0x20
[   92.843418]  __fput+0xda/0x1f0
[   92.844740]  task_work_run+0x87/0xb0
[   92.846215]  do_exit+0x2f5/0xba0
[   92.850528]  do_group_exit+0x34/0xb0
[   92.852018]  SyS_exit_group+0xb/0x10
[   92.853449]  do_syscall_64+0x6e/0x270
[   92.854944]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[   92.943530] 1 lock held by a.out/634:
[   92.945105]  #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0
----------------------------------------

The reason of q->mq_freeze_depth == 1 turned out that loop_set_status()
forgot to call blk_mq_unfreeze_queue() at error paths for
info->lo_encrypt_type != NULL case.

----------------------------------------
[   37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G        W        4.16.0+ #457
[   37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[   37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40
[   37.521778] RSP: 0018:ffffb0c2013e7c60 EFLAGS: 00010246
[   37.524078] RAX: 0000000000000000 RBX: ffff8b07b1519798 RCX: 0000000000000000
[   37.527015] RDX: 0000000000000002 RSI: ffffb0c2013e7cc0 RDI: ffff8b07b1519798
[   37.529934] RBP: ffffb0c2013e7cc0 R08: 0000000000000008 R09: 47a189966239b898
[   37.532684] R10: dad78b99b278552f R11: 9332dca72259d5ef R12: ffff8b07acd73678
[   37.535452] R13: 0000000000004c04 R14: 0000000000000000 R15: ffff8b07b841e940
[   37.538186] FS:  00007fede33b9740(0000) GS:ffff8b07b8e80000(0000) knlGS:0000000000000000
[   37.541168] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   37.543590] CR2: 00000000206fdf18 CR3: 0000000130b30006 CR4: 00000000000606e0
[   37.546410] Call Trace:
[   37.547902]  blk_freeze_queue+0x9/0x30
[   37.549968]  loop_set_status+0x67/0x3c0 [loop]
[   37.549975]  loop_set_status64+0x3b/0x70 [loop]
[   37.549986]  lo_ioctl+0x223/0x810 [loop]
[   37.549995]  blkdev_ioctl+0x572/0x980
[   37.550003]  block_ioctl+0x34/0x40
[   37.550006]  do_vfs_ioctl+0xa7/0x6d0
[   37.550017]  ksys_ioctl+0x6b/0x80
[   37.573076]  SyS_ioctl+0x5/0x10
[   37.574831]  do_syscall_64+0x6e/0x270
[   37.576769]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
----------------------------------------

[1] https://syzkaller.appspot.com/bug?id=cd662bc3f6022c0979d01a262c318fab2ee9b56fSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com>
Fixes: ecdd0959 ("block/loop: fix race between I/O and set_status")
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch orders getting budget and driver tag by making sure to acquire
driver tag after budget is got, this way can help to avoid the following
race:

1) before dispatch request from scheduler queue, get one budget first, then
dequeue a request, call it request A.

2) in another IO path for dispatching request B which is from hctx->dispatch,
driver tag is got, then try to get budget in blk_mq_dispatch_rq_list(),
unfortunately the budget is held by request A.

3) meantime blk_mq_dispatch_rq_list() is called for dispatching request
A, and try to get driver tag first, unfortunately no driver tag is
available because the driver tag is held by request B

4) both two IO pathes can't move on, and IO stall is caused.

This issue can be observed when running dbench on USB storage.

This patch fixes this issue by always getting budget before getting
driver tag.

Cc: stable@vger.kernel.org
Fixes: de148297 ("blk-mq: introduce .get_budget and .put_budget in blk_mq_ops")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
  ufs, mpt3sas, hisi_sas.

  In addition we have removed several really old drivers: sym53c416,
  NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
  initialization from all remaining drivers.

  Plus an assortment of bug fixes, initialization errors and other minor
  fixes"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
  scsi: ufs: Add support for Auto-Hibernate Idle Timer
  scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
  scsi: qla2xxx: fx00 copypaste typo
  scsi: qla2xxx: fix error message on <qla2400
  scsi: smartpqi: update driver version
  scsi: smartpqi: workaround fw bug for oq deletion
  scsi: arcmsr: Change driver version to v1.40.00.05-20180309
  scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
  scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
  scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
  scsi: qla2xxx: Update driver version to 10.00.00.06-k
  scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
  scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
  scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
  scsi: qla2xxx: Remove nvme_done_list
  scsi: qla2xxx: Return busy if rport going away
  scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
  scsi: qla2xxx: Add FC-NVMe abort processing
  scsi: qla2xxx: Add changes for devloss timeout in driver
  ...

Pull block layer updates from Jens Axboe:
 "It's a pretty quiet round this time, which is nice. This contains:

   - series from Bart, cleaning up the way we set/test/clear atomic
     queue flags.

   - series from Bart, fixing races between gendisk and queue
     registration and removal.

   - set of bcache fixes and improvements from various folks, by way of
     Michael Lyle.

   - set of lightnvm updates from Matias, most of it being the 1.2 to
     2.0 transition.

   - removal of unused DIO flags from Nikolay.

   - blk-mq/sbitmap memory ordering fixes from Omar.

   - divide-by-zero fix for BFQ from Paolo.

   - minor documentation patches from Randy.

   - timeout fix from Tejun.

   - Alpha "can't write a char atomically" fix from Mikulas.

   - set of NVMe fixes by way of Keith.

   - bsg and bsg-lib improvements from Christoph.

   - a few sed-opal fixes from Jonas.

   - cdrom check-disk-change deadlock fix from Maurizio.

   - various little fixes, comment fixes, etc from various folks"

* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
  blk-mq: Directly schedule q->timeout_work when aborting a request
  blktrace: fix comment in blktrace_api.h
  lightnvm: remove function name in strings
  lightnvm: pblk: remove some unnecessary NULL checks
  lightnvm: pblk: don't recover unwritten lines
  lightnvm: pblk: implement 2.0 support
  lightnvm: pblk: implement get log report chunk
  lightnvm: pblk: rename ppaf* to addrf*
  lightnvm: pblk: check for supported version
  lightnvm: implement get log report chunk helpers
  lightnvm: make address conversions depend on generic device
  lightnvm: add support for 2.0 address format
  lightnvm: normalize geometry nomenclature
  lightnvm: complete geo structure with maxoc*
  lightnvm: add shorten OCSSD version in geo
  lightnvm: add minor version to generic geometry
  lightnvm: simplify geometry structure
  lightnvm: pblk: refactor init/exit sequences
  lightnvm: Avoid validation of default op value
  lightnvm: centralize permission check for lightnvm ioctl
  ...

Pull EDAC updates from Borislav Petkov:
 "Noteworthy is the NVDIMM support:

   - NVDIMM support to EDAC (Tony Luck)

   - misc fixes"

* tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, sb_edac: Remove variable length array usage
  EDAC, skx_edac: Detect non-volatile DIMMs
  firmware, DMI: Add function to look up a handle and return DIMM size
  acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle
  EDAC: Add new memory type for non-volatile DIMMs
  EDAC: Drop duplicated array of strings for memory type names
  EDAC, layerscape: Allow building for LS1021A

In the effort to remove all VLAs from the kernel[1], it is desirable to
build with -Wvla.  However, this warning is overly pessimistic, in that
it is only happy with stack array sizes that are declared as constant
expressions, and not constant values.  One case of this is the
evaluation of the max() macro which, due to its construction, ends up
converting constant expression arguments into a constant value result.

All attempts to rewrite this macro with __builtin_constant_p() failed
with older compilers (e.g.  gcc 4.4)[2].  However, Martin Uecker,
constructed[3] a mind-shattering solution that works everywhere.
Cthulhu fhtagn!

This patch updates the min()/max() macros to evaluate to a constant
expression when called on constant expression arguments.  This removes
several false-positive stack VLA warnings from an x86 allmodconfig build
when -Wvla is added:

  $ diff -u before.txt after.txt | grep ^-
  -drivers/input/touchscreen/cyttsp4_core.c:871:2: warning: ISO C90 forbids variable length array ‘ids’ [-Wvla]
  -fs/btrfs/tree-checker.c:344:4: warning: ISO C90 forbids variable length array ‘namebuf’ [-Wvla]
  -lib/vsprintf.c:747:2: warning: ISO C90 forbids variable length array ‘sym’ [-Wvla]
  -net/ipv4/proc.c:403:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
  -net/ipv6/proc.c:198:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
  -net/ipv6/proc.c:218:2: warning: ISO C90 forbids variable length array ‘buff64’ [-Wvla]

This also updates two cases where different enums were being compared
and explicitly casts them to int (which matches the old side-effect of
the single-evaluation code): one in tpm/tpm_tis_core.h, and one in
drm/drm_color_mgmt.c.

 [1] https://lkml.org/lkml/2018/3/7/621
 [2] https://lkml.org/lkml/2018/3/10/170
 [3] https://lkml.org/lkml/2018/3/20/845Co-Developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-Developed-by: Martin Uecker <Martin.Uecker@med.uni-goettingen.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:

 - new driver for PhoenixRC Flight Controller Adapter

 - new driver for RAVE SP Power button

 - fixes for autosuspend-related deadlocks in a few unput USB dirvers

 - support for 2nd wheel in ATech PS/2 mouse

 - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370

 - bunch of cleanups in various in PS/2 protocols

 - other assorted changes and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
  Input: stmfts, s6sy761 - update my e-mail
  Input: stmfts - use async probe & suspend/resume to avoid 2s delay
  Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
  Input: xpad - add PDP device id 0x02a4
  Input: alps - report pressure of v3 and v7 trackstick
  Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
  Input: usbtouchscreen - do not rely on input_dev->users
  Input: usbtouchscreen - fix deadlock in autosuspend
  Input: pegasus_notetaker - do not rely on input_dev->users
  Input: pagasus_notetaker - fix deadlock in autosuspend
  Input: synaptics_usb - do not rely on input_dev->users
  Input: synaptics_usb - fix deadlock in autosuspend
  Input: gpio-keys - add support for wakeup event action
  Input: appletouch - use true and false for boolean values
  Input: silead - add Chuwi Hi8 support
  Input: analog - use get_cycles() on PPC
  Input: stmpe-keypad - remove VLA usage
  Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
  Input: add RAVE SP Powerbutton driver
  ...

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  kfifo: fix inaccurate comment
  tools/thermal: tmon: fix for segfault
  net: Spelling s/stucture/structure/
  edd: don't spam log if no EDD information is present
  Documentation: Fix early-microcode.txt references after file rename
  tracing: Block comments should align the * on each line
  treewide: Fix typos in printk
  GenWQE: Fix a typo in two comments
  treewide: Align function definition open/close braces

Pull HID updates from Jiri Kosina:

 - 3rd generation Wacom Intuos BT device support from Aaron Armstrong
   Skomra

 - support for NSG-MR5U and NSG-MR7U devices from Todd Kelner

 - multitouch Razer Blade Stealth support from Benjamin Tissoires

 - Elantech touchpad support from Alexandrov Stansilav

 - a few other scattered-around fixes and cleanups to drivers and
   generic code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits)
  HID: google: Enable PM Full On mode when adjusting backlight
  HID: google: add google hammer HID driver
  HID: core: reset the quirks before calling probe again
  HID: multitouch: do not set HID_QUIRK_NO_INIT_REPORTS
  HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT
  HID: use BIT() macro for quirks too
  HID: use BIT macro instead of plain integers for flags
  HID: multitouch: remove dead zones of Razer Blade Stealth
  HID: multitouch: export a quirk for the button handling of touchpads
  HID: usbhid: extend the polling interval configuration to keyboards
  HID: ntrig: document sysfs interface
  HID: wacom: wacom_wac_collection() is local to wacom_wac.c
  HID: wacom: generic: add the "Report Valid" usage
  HID: wacom: generic: Support multiple tools per report
  HID: wacom: Add support for 3rd generation Intuos BT
  HID: core: rewrite the hid-generic automatic unbind
  HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes
  HID: hid-multitouch: Use true and false for boolean values
  HID: hid-ntrig: use true and false for boolean values
  HID: logitech-hidpp: document sysfs interface
  ...

Pull sound updates from Takashi Iwai:
 "This became a large update. The changes are scattered widely, and the
  majority of them are attributed to ASoC componentization. The gitk
  output made me dizzy, but it's slightly better than London tube.

  OK, below are some highlights:

   - Continued hardening works in ALSA PCM core; most of the existing
     syzkaller reports should have been covered.

   - USB-audio got the initial USB Audio Class 3 support, as well as
     UAC2 jack detection support and more DSD-device support.

   - ASoC componentization: finally each individual driver was converted
     to components framework, which is more future-proof for further
     works. Most of conversations were systematic.

   - Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek
     codecs, typically tablets and small PCs.

   - Fixes / cleanups for Samsung Odroid systems

   - Cleanups in Freescale SSI driver

   - New ASoC drivers:
      * AKM AK4458 and AK5558 codecs
      * A few AMD based machine drivers
      * Intel Kabylake machine drivers
      * Maxim MAX9759 codec
      * Motorola CPCAP codec
      * Socionext Uniphier SoCs
      * TI PCM1789 and TDA7419 codecs

   - Retirement of Blackfin drivers along with architecture removal"

* tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
  ALSA: pcm: Fix UAF at PCM release via PCM timer access
  ALSA: usb-audio: silence a static checker warning
  ASoC: tscs42xx: Remove owner assignment from i2c_driver
  ASoC: mediatek: remove "simple-mfd" in the example
  ASoC: cpcap: replace codec to component
  ASoC: Intel: bytcr_rt5651: don't use codec anymore
  ASoC: amd: don't use codec anymore
  ALSA: usb-audio: fix memory leak on cval
  ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
  ASoC: topology: Fix kcontrol name string handling
  ALSA: aloop: Mark paused device as inactive
  ALSA: usb-audio: update clock valid control
  ALSA: usb-audio: UAC2 jack detection
  ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
  ALSA: pcm: Avoid potential races between OSS ioctls and read/write
  ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs.
  ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC
  ALSA: usb-audio: Add native DSD support for Luxman DA-06
  ALSA: usb-audio: fix uac control query argument
  ASoC: nau8824: recover system clock when device changes
  ...

Pull dma-mapping updates from Christoph Hellwig:
 "Very light this round as the interesting dma mapping changes went
  through the x86 tree.

  This just provides proper stubs for architectures not supporting dma
  (Geert Uytterhoeven)"

* tag 'dma-mapping-4.17' of git://git.infradead.org/users/hch/dma-mapping:
  usb: gadget: Add NO_DMA dummies for DMA mapping API
  scsi: Add NO_DMA dummies for SCSI DMA mapping API
  mm: Add NO_DMA dummies for DMA pool API
  dma-coherent: Add NO_DMA dummies for managed DMA API
  dma-mapping: Convert NO_DMA get_dma_ops() into a real dummy

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.17 kernel cycle:

  New drivers:

   - Nintendo Wii GameCube GPIO, known as "Hollywood"

   - Raspberry Pi mailbox service GPIO expander

   - Spreadtrum main SC9860 SoC and IEC GPIO controllers.

  Improvements:

   - Implemented .get_multiple() callback for most of the
     high-performance industrial GPIO cards for the ISA bus.

   - ISA GPIO drivers now select the ISA_BUS_API instead of depending on
     it. This is merged with the same pattern for all the ISA drivers
     and some other Kconfig cleanups related to this.

  Cleanup:

   - Delete the TZ1090 GPIO drivers following the deletion of this SoC
     from the ARM tree.

   - Move the documentation over to driver-api to conform with the rest
     of the kernel documentation build.

   - Continue to make the GPIO drivers include only
     <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
     want to get rid of.

   - Managed to remove VLA allocation from two drivers pending more
     fixes in this area for the next merge window.

   - Misc janitorial fixes"

* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: Add Spreadtrum PMIC EIC driver support
  gpio: Add Spreadtrum EIC driver support
  dt-bindings: gpio: Add Spreadtrum EIC controller documentation
  gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
  pinctrl: qcom: Don't allow protected pins to be requested
  gpiolib: Support 'gpio-reserved-ranges' property
  gpiolib: Change bitmap allocation to kmalloc_array
  gpiolib: Extract mask allocation into subroutine
  dt-bindings: gpio: Add a gpio-reserved-ranges property
  gpio: mockup: fix a potential crash when creating debugfs entries
  gpio: pca953x: add compatibility for pcal6524 and pcal9555a
  gpio: dwapb: Add support for a bus clock
  gpio: Remove VLA from xra1403 driver
  gpio: Remove VLA from MAX3191X driver
  gpio: ws16c48: Implement get_multiple callback
  gpio: gpio-mm: Implement get_multiple callback
  gpio: 104-idi-48: Implement get_multiple callback
  gpio: 104-dio-48e: Implement get_multiple callback
  gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Implement get_multiple callback
  ...

Pull support for 3rd generation Intuos BT device

Pull a few small generic code cleanups.

Pull support for NSG-MR5U and NSG-MR7U devices.

Pull Razer Blade Stealth support improvement and a few generic cleanups

Small hid-i2c acpi cleanup.

Pull new hid-elan driver, currently providing support for touchpad
found in certain HP Pavilion x2 laptops.

Support for Google Hammer device.

Support for new elecom device.

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

Merge tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 4.17-rc1.

  There's really not much here, just a bunch of firmware code
  refactoring from Luis as he attempts to wrangle that codebase into
  something that is managable, along with a bunch of userspace tests for
  it. Other than that, a handful of small bugfixes and reverts of things
  that didn't work out.

  Full details are in the shortlog, it's not all that much.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  drivers: base: remove check for callback in coredump_store()
  mt7601u: use firmware_request_cache() to address cache on reboot
  firmware: add firmware_request_cache() to help with cache on reboot
  firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used
  firmware: explicitly include vmalloc.h
  firmware: ensure the firmware cache is not used on incompatible calls
  test_firmware: modify custom fallback tests to use unique files
  firmware: add helper to check to see if fw cache is setup
  firmware: fix checking for return values for fw_add_devm_name()
  rename: _request_firmware_load() fw_load_sysfs_fallback()
  test_firmware: test three firmware kernel configs using a proc knob
  test_firmware: expand on library with shared helpers
  firmware: enable to force disable the fallback mechanism at run time
  firmware: enable run time change of forcing fallback loader
  firmware: move firmware loader into its own directory
  firmware: split firmware fallback functionality into its own file
  firmware: move loading timeout under struct firmware_fallback_config
  firmware: use helpers for setting up a temporary cache timeout
  firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further
  drivers: base: add description for .coredump() callback
  ...

Pull staging/IIO updates from Greg KH:
 "Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...

Pull networking fixes from David Miller:
 "This fixes some fallout from the net-next merge the other day, plus
  some non-merge-window-related bug fixes:

  1) Fix sparse warnings in bcmgenet, systemport, b53, and mt7530
     (Florian Fainelli)

  2) pptp does a bogus dst_release() on a route we have a single
     refcount on, and attached to a socket, which needs that refcount
     (Eric Dumazet)

  3) UDP connected sockets on ipv6 can race with route update handling,
     resulting in a pre-PMTU update route still stuck on the socket and
     thus continuing to get ICMPV6_PKT_TOOBIG errors. We end up never
     seeing the updated route. (Alexey Kodanev)

  4) Missing list initializer(s) in TIPC (Jon Maloy)

  5) Connect phy early to prevent crashes in lan78xx driver (Alexander
     Graf)

  6) Fix build with modular NVMEM (Arnd Bergmann)

  7) netdevsim canot mark nsim_devlink_net_ops and nsim_fib_net_ops as
     __net_initdata, as these are references from module unload
     unconditionally (Arnd Bergmann)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  netdevsim: remove incorrect __net_initdata annotations
  sfc: remove ctpio_dmabuf_start from stats
  inet: frags: fix ip6frag_low_thresh boundary
  tipc: Fix namespace violation in tipc_sk_fill_sock_diag
  net: avoid unneeded atomic operation in ip*_append_data()
  nvmem: disallow modular CONFIG_NVMEM
  net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES
  nfp: use full 40 bits of the NSP buffer address
  lan78xx: Connect phy early
  nfp: add a separate counter for packets with CHECKSUM_COMPLETE
  tipc: Fix missing list initializations in struct tipc_subscription
  ipv6: udp: set dst cache for a connected sk if current not valid
  ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()
  ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()
  ipv6: add a wrapper for ip6_dst_store() with flowi6 checks
  net: phy: marvell10g: add thermal hwmon device
  pptp: remove a buggy dst release in pptp_connect()
  net: dsa: mt7530: Use NULL instead of plain integer
  net: dsa: b53: Fix sparse warnings in b53_mmap.c
  af_unix: remove redundant lockdep class
  ...

Pull crypto updates from Herbert Xu:
 "API:

   - add AEAD support to crypto engine

   - allow batch registration in simd

  Algorithms:

   - add CFB mode

   - add speck block cipher

   - add sm4 block cipher

   - new test case for crct10dif

   - improve scheduling latency on ARM

   - scatter/gather support to gcm in aesni

   - convert x86 crypto algorithms to skcihper

  Drivers:

   - hmac(sha224/sha256) support in inside-secure

   - aes gcm/ccm support in stm32

   - stm32mp1 support in stm32

   - ccree driver from staging tree

   - gcm support over QI in caam

   - add ks-sa hwrng driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits)
  crypto: ccree - remove unused enums
  crypto: ahash - Fix early termination in hash walk
  crypto: brcm - explicitly cast cipher to hash type
  crypto: talitos - don't leak pointers to authenc keys
  crypto: qat - don't leak pointers to authenc keys
  crypto: picoxcell - don't leak pointers to authenc keys
  crypto: ixp4xx - don't leak pointers to authenc keys
  crypto: chelsio - don't leak pointers to authenc keys
  crypto: caam/qi - don't leak pointers to authenc keys
  crypto: caam - don't leak pointers to authenc keys
  crypto: lrw - Free rctx->ext with kzfree
  crypto: talitos - fix IPsec cipher in length
  crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
  crypto: doc - clarify hash callbacks state machine
  crypto: api - Keep failed instances alive
  crypto: api - Make crypto_alg_lookup static
  crypto: api - Remove unused crypto_type lookup function
  crypto: chelsio - Remove declaration of static function from header
  crypto: inside-secure - hmac(sha224) support
  crypto: inside-secure - hmac(sha256) support
  ..

Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains the new features we'd like to incorporate into the
  RISC-V port for 4.17. We might have a bit more stuff land later in the
  merge window, but I wanted to get this out earlier just so everyone
  can see where we currently stand.

  A short summary of the changes is:

   - We've added support for dynamic ftrace on RISC-V targets.

   - There have been a handful of cleanups to our atomic and locking
     routines. They now more closely match the released RISC-V memory
     model draft.

   - Our module loading support has been cleaned up and is now enabled
     by default, despite some limitations still existing.

   - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
     so the generic device tree code picks up handling all our command
     line stuff.

  There's more information in the merge commits for each patch set"

* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
  RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
  RISC-V: Add definition of relocation types
  RISC-V: Enable module support in defconfig
  RISC-V: Support SUB32 relocation type in kernel module
  RISC-V: Support ADD32 relocation type in kernel module
  RISC-V: Support ALIGN relocation type in kernel module
  RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
  RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
  RISC-V: Support CALL relocation type in kernel module
  RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
  RISC-V: Add section of GOT.PLT for kernel module
  RISC-V: Add sections of PLT and GOT for kernel module
  riscv/atomic: Strengthen implementations with fences
  riscv/spinlock: Strengthen implementations with fences
  riscv/barrier: Define __smp_{store_release,load_acquire}
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add dynamic function tracer support
  ...

Prepare input updates for 4.17 merge window.

The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request

Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull arm64 updates from Will Deacon:
 "Nothing particularly stands out here, probably because people were
  tied up with spectre/meltdown stuff last time around. Still, the main
  pieces are:

   - Rework of our CPU features framework so that we can whitelist CPUs
     that don't require kpti even in a heterogeneous system

   - Support for the IDC/DIC architecture extensions, which allow us to
     elide instruction and data cache maintenance when writing out
     instructions

   - Removal of the large memory model which resulted in suboptimal
     codegen by the compiler and increased the use of literal pools,
     which could potentially be used as ROP gadgets since they are
     mapped as executable

   - Rework of forced signal delivery so that the siginfo_t is
     well-formed and handling of show_unhandled_signals is consolidated
     and made consistent between different fault types

   - More siginfo cleanup based on the initial patches from Eric
     Biederman

   - Workaround for Cortex-A55 erratum #1024718

   - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi

   - Misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: uaccess: Fix omissions from usercopy whitelist
  arm64: fpsimd: Split cpu field out from struct fpsimd_state
  arm64: tlbflush: avoid writing RES0 bits
  arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
  arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
  arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
  arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
  arm64: fpsimd: include <linux/init.h> in fpsimd.h
  drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
  perf: arm_spe: include linux/vmalloc.h for vmap()
  Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
  arm64: cpufeature: Avoid warnings due to unused symbols
  arm64: Add work around for Arm Cortex-A55 Erratum 1024718
  arm64: Delay enabling hardware DBM feature
  arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
  arm64: capabilities: Handle shared entries
  arm64: capabilities: Add support for checks based on a list of MIDRs
  arm64: Add helpers for checking CPU MIDR against a range
  arm64: capabilities: Clean up midr range helpers
  arm64: capabilities: Change scope of VHE to Boot CPU feature
  ...

Pull irq updates from Thomas Gleixner:
 "The usual pile of boring changes:

   - Consolidate tasklet functions to share code instead of duplicating
     it

   - The first step for making the low level entry handler management on
     multi-platform kernels generic

   - A new sysfs file which allows to retrieve the wakeup state of
     interrupts.

   - Ensure that the interrupt thread follows the effective affinity and
     not the programmed affinity to avoid cross core wakeups.

   - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
     PDC)

   - Fix the wakeup path clock handling for Reneasas interrupt chips.

   - Rework the boot time register reset for ARM GIC-V2/3

   - Better suspend/resume support for ARM GIV-V3/ITS

   - Add missing locking to the ARM GIC set_type() callback

   - Small fixes for the irq simulator code

   - SPDX identifiers for the irq core code and removal of boiler plate

   - Small cleanups all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  openrisc: Set CONFIG_MULTI_IRQ_HANDLER
  arm64: Set CONFIG_MULTI_IRQ_HANDLER
  genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
  irqchip/gic: Take lock when updating irq type
  irqchip/gic: Update supports_deactivate static key to modern api
  irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
  irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
  irqchip/gic-v3: Don't try to reset AP0Rn
  irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
  genirq: Remove license boilerplate/references
  genirq: Add missing SPDX identifiers
  genirq/matrix: Cleanup SPDX identifier
  genirq: Cleanup top of file comments
  genirq: Pass desc to __irq_free instead of irq number
  irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
  irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
  RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
  genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ...

Pull time(r) updates from Thomas Gleixner:
 "A small set of updates for timers and timekeeping:

   - The most interesting change is the consolidation of clock MONOTONIC
     and clock BOOTTIME.

     Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
     not longer ignore the time spent in suspend. A new clock
     MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
     kernels before this change. This allows applications to
     programmatically check for the clock MONOTONIC behaviour.

     As discussed in the review thread, this has the potential of
     breaking user space and we might have to revert this. Knock on wood
     that we can avoid that exercise.

   - Updates to the NTP mechanism to improve accuracy

   - A new kernel internal data structure to aid the ongoing Y2038 work.

   - Cleanups and simplifications of the clocksource code.

   - Make the alarmtimer code play nicely with debugobjects"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Init nanosleep alarm timer on stack
  y2038: Introduce struct __kernel_old_timeval
  tracing: Unify the "boot" and "mono" tracing clocks
  hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
  posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Remove boot time specific code
  Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
  timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
  timekeeping/ntp: Determine the multiplier directly from NTP tick length
  timekeeping/ntp: Don't align NTP frequency adjustments to ticks
  clocksource: Use ATTRIBUTE_GROUPS
  clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
  clocksource: Don't walk the clocksource list for empty override

Pull /dev/random updates from Ted Ts'o:
 "A few random (cough, cough) cleanups for the /dev/random driver"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  drivers/char/random.c: remove unused dont_count_entropy
  random: optimize add_interrupt_randomness
  random: always fill buffer in get_random_bytes_wait
  random: use a tighter cap in credit_entropy_bits_safe()