- 26 Jan, 2012 40 commits
-
-
Benjamin Tissoires authored
commit 66f06127 upstream. Just another eGalax device. Please note that adding this device to have_special_driver in hid-core.c is not required anymore. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Marek Vasut authored
commit bb9ff210 upstream. This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel supports up to five fingers, therefore the need for a new addition of panel types. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit e36f690b upstream. This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N} to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax devices. Signed-off-by:
-
Chris Bagwell authored
commit 1fd8f047 upstream. This allows ASUS Eee Slate touchscreens to work. Signed-off-by:
Chris Bagwell <chris@cnpbagwell.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by:
-
Nick Bowler authored
commit b7ea81a5 upstream. The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nick Bowler authored
commit 069294e8 upstream. The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by:
-
Miklos Szeredi authored
commit eaf5f907 upstream. Two (or more) concurrent calls of shrink_dcache_parent() on the same dentry may cause shrink_dcache_parent() to loop forever. Here's what appears to happen: 1 - CPU0: select_parent(P) finds C and puts it on dispose list, returns 1 2 - CPU1: select_parent(P) locks P->d_lock 3 - CPU0: shrink_dentry_list() locks C->d_lock dentry_kill(C) tries to lock P->d_lock but fails, unlocks C->d_lock 4 - CPU1: select_parent(P) locks C->d_lock, moves C from dispose list being processed on CPU0 to the new dispose list, returns 1 5 - CPU0: shrink_dentry_list() finds dispose list empty, returns 6 - Goto 2 with CPU0 and CPU1 switched Basically select_parent() steals the dentry from shrink_dentry_list() and thinks it found a new one, causing shrink_dentry_list() to think it's making progress and loop over and over. One way to trigger this is to make udev calls stat() on the sysfs file while it is going away. Having a file in /lib/udev/rules.d/ with only this one rule seems to the trick: ATTR{vendor}=="0x8086", ATTR{device}=="0x10ca", ENV{PCI_SLOT_NAME}="%k", ENV{MATCHADDR}="$attr{address}", RUN+="/bin/true" Then execute the following loop: while true; do echo -bond0 > /sys/class/net/bonding_masters echo +bond0 > /sys/class/net/bonding_masters echo -bond1 > /sys/class/net/bonding_masters echo +bond1 > /sys/class/net/bonding_masters done One fix would be to check all callers and prevent concurrent calls to shrink_dcache_parent(). But I think a better solution is to stop the stealing behavior. This patch adds a new dentry flag that is set when the dentry is added to the dispose list. The flag is cleared in dentry_lru_del() in case the dentry gets a new reference just before being pruned. If the dentry has this flag, select_parent() will skip it and let shrink_dentry_list() retry pruning it. With select_parent() skipping those dentries there will not be the appearance of progress (new dentries found) when there is none, hence shrink_dcache_parent() will not loop forever. Set the flag is also set in prune_dcache_sb() for consistency as suggested by Linus. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Haogang Chen authored
commit 806e23e9 upstream. There is a potential integer overflow in uvc_ioctl_ctrl_map(). When a large xmap->menu_count is passed from the userspace, the subsequent call to kmalloc() will allocate a buffer smaller than expected. map->menu_count and map->menu_info would later be used in a loop (e.g. in uvc_query_v4l2_ctrl), which leads to out-of-bound access. The patch checks the ioctl argument and returns -EINVAL for zero or too large values in xmap->menu_count. Signed-off-by:
Haogang Chen <haogangchen@gmail.com> [laurent.pinchart@ideasonboard.com Prevent excessive memory consumption] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
David Daney authored
commit 2e885057 upstream. In ELF64, the sh_flags field is 64-bits wide. recordmcount was erroneously treating it as a 32-bit wide field. For little endian objects this works because the flags of interest (SHF_EXECINSTR) reside in the lower 32 bits of the word, and you get the same result with either a 32-bit or 64-bit read. Big endian objects on the other hand do not work at all with this error. The fix: Correctly treat sh_flags as 64-bits wide in elf64 objects. The symptom I observed was that my __start_mcount_loc..__stop_mcount_loc was empty even though ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/1324345362-12230-1-git-send-email-ddaney.cavm@gmail.comSigned-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Jack Steiner authored
commit da517a08 upstream. SGI UV systems print a message during boot: UV: Found <num> blades Due to packaging changes, the blade count is not accurate for on the next generation of the platform. This patch corrects the count. Signed-off-by:
Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20120106191900.GA19772@sgi.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Miklos Szeredi authored
commit fed47485 upstream. Removing the parent of a watched file results in "kernel BUG at fs/notify/mark.c:139". To reproduce add "-w /tmp/audit/dir/watched_file" to audit.rules rm -rf /tmp/audit/dir This is caused by fsnotify_destroy_mark() being called without an extra reference taken by the caller. Reported by Francesco Cosoleto here: https://bugzilla.novell.com/show_bug.cgi?id=689860 Fix by removing the BUG_ON and adding a comment about not accessing mark after the iput. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit b2ea70af upstream. expkey_parse() oopses when handling a 0 length export. This is easily triggerable from usermode by writing 0 bytes into '/proc/[proc id]/net/rpc/nfsd.fh/channel'. Below is the log: [ 1402.286893] BUG: unable to handle kernel paging request at ffff880077c49fff [ 1402.287632] IP: [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] PGD 2206063 PUD 1fdfd067 PMD 1ffbc067 PTE 8000000077c49160 [ 1402.287632] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1402.287632] CPU 1 [ 1402.287632] Pid: 20198, comm: trinity Not tainted 3.2.0-rc2-sasha-00058-gc65cd37 #6 [ 1402.287632] RIP: 0010:[<ffffffff812b4b99>] [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] RSP: 0018:ffff880077f0fd68 EFLAGS: 00010292 [ 1402.287632] RAX: ffff880077c49fff RBX: 00000000ffffffea RCX: 0000000001043400 [ 1402.287632] RDX: 0000000000000000 RSI: ffff880077c4a000 RDI: ffffffff82283de0 [ 1402.287632] RBP: ffff880077f0fe18 R08: 0000000000000001 R09: ffff880000000000 [ 1402.287632] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880077c4a000 [ 1402.287632] R13: ffffffff82283de0 R14: 0000000001043400 R15: ffffffff82283de0 [ 1402.287632] FS: 00007f25fec3f700(0000) GS:ffff88007d400000(0000) knlGS:0000000000000000 [ 1402.287632] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1402.287632] CR2: ffff880077c49fff CR3: 0000000077e1d000 CR4: 00000000000406e0 [ 1402.287632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1402.287632] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1402.287632] Process trinity (pid: 20198, threadinfo ffff880077f0e000, task ffff880077db17b0) [ 1402.287632] Stack: [ 1402.287632] ffff880077db17b0 ffff880077c4a000 ffff880077f0fdb8 ffffffff810b411e [ 1402.287632] ffff880000000000 ffff880077db17b0 ffff880077c4a000 ffffffff82283de0 [ 1402.287632] 0000000001043400 ffffffff82283de0 ffff880077f0fde8 ffffffff81111f63 [ 1402.287632] Call Trace: [ 1402.287632] [<ffffffff810b411e>] ? lock_release+0x1af/0x1bc [ 1402.287632] [<ffffffff81111f63>] ? might_fault+0x97/0x9e [ 1402.287632] [<ffffffff81111f1a>] ? might_fault+0x4e/0x9e [ 1402.287632] [<ffffffff81a8bcf2>] cache_do_downcall+0x3e/0x4f [ 1402.287632] [<ffffffff81a8c950>] cache_write.clone.16+0xbb/0x130 [ 1402.287632] [<ffffffff81a8c9df>] ? cache_write_pipefs+0x1a/0x1a [ 1402.287632] [<ffffffff81a8c9f8>] cache_write_procfs+0x19/0x1b [ 1402.287632] [<ffffffff8118dc54>] proc_reg_write+0x8e/0xad [ 1402.287632] [<ffffffff8113fe81>] vfs_write+0xaa/0xfd [ 1402.287632] [<ffffffff8114142d>] ? fget_light+0x35/0x9e [ 1402.287632] [<ffffffff8113ff8b>] sys_write+0x48/0x6f [ 1402.287632] [<ffffffff81bbdb92>] system_call_fastpath+0x16/0x1b [ 1402.287632] Code: c0 c9 c3 55 48 63 d2 48 89 e5 48 8d 44 32 ff 41 57 41 56 41 55 41 54 53 bb ea ff ff ff 48 81 ec 88 00 00 00 48 89 b5 58 ff ff ff [ 1402.287632] 38 0a 0f 85 89 02 00 00 c6 00 00 48 8b 3d 44 4a e5 01 48 85 [ 1402.287632] RIP [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] RSP <ffff880077f0fd68> [ 1402.287632] CR2: ffff880077c49fff [ 1402.287632] ---[ end trace 368ef53ff773a5e3 ]--- Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-nfs@vger.kernel.org Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit b4f36f88 upstream. Socket callbacks use svc_xprt_enqueue() to add an xprt to a pool->sp_sockets list. In normal operation a server thread will later come along and take the xprt off that list. On shutdown, after all the threads have exited, we instead manually walk the sv_tempsocks and sv_permsocks lists to find all the xprt's and delete them. So the sp_sockets lists don't really matter any more. As a result, we've mostly just ignored them and hoped they would go away. Which has gotten us into trouble; witness for example ebc63e53 "svcrpc: fix list-corrupting race on nfsd shutdown", the result of Ben Greear noticing that a still-running svc_xprt_enqueue() could re-add an xprt to an sp_sockets list just before it was deleted. The fix was to remove it from the list at the end of svc_delete_xprt(). But that only made corruption less likely--I can see nothing that prevents a svc_xprt_enqueue() from adding another xprt to the list at the same moment that we're removing this xprt from the list. In fact, despite the earlier xpo_detach(), I don't even see what guarantees that svc_xprt_enqueue() couldn't still be running on this xprt. So, instead, note that svc_xprt_enqueue() essentially does: lock sp_lock if XPT_BUSY unset add to sp_sockets unlock sp_lock So, if we do: set XPT_BUSY on every xprt. Empty every sp_sockets list, under the sp_socks locks. Then we're left knowing that the sp_sockets lists are all empty and will stay that way, since any svc_xprt_enqueue() will check XPT_BUSY under the sp_lock and see it set. And *then* we can continue deleting the xprt's. (Thanks to Jeff Layton for being correctly suspicious of this code....) Cc: Ben Greear <greearb@candelatech.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 2fefb8a0 upstream. There's no reason I can see that we need to call sv_shutdown between closing the two lists of sockets. Signed-off-by:
-
J. Bruce Fields authored
commit 61c8504c upstream. The pool_to and to_pool fields of the global svc_pool_map are freed on shutdown, but are initialized in nfsd startup only in the SVC_POOL_PERCPU and SVC_POOL_PERNODE cases. They *are* initialized to zero on kernel startup. So as long as you use only SVC_POOL_GLOBAL (the default), this will never be a problem. You're also OK if you only ever use SVC_POOL_PERCPU or SVC_POOL_PERNODE. However, the following sequence events leads to a double-free: 1. set SVC_POOL_PERCPU or SVC_POOL_PERNODE 2. start nfsd: both fields are initialized. 3. shutdown nfsd: both fields are freed. 4. set SVC_POOL_GLOBAL 5. start nfsd: the fields are left untouched. 6. shutdown nfsd: now we try to free them again. Step 4 is actually unnecessary, since (for some bizarre reason), nfsd automatically resets the pool mode to SVC_POOL_GLOBAL on shutdown. Signed-off-by:
-
Steven Rostedt authored
commit 364212fd upstream. Thomas Lange reported that when he did a 'make localmodconfig', his config was missing the brcmsmac driver, even though he had the module loaded. Looking into this, I found the file: drivers/net/wireless/brcm80211/brcmsmac/Makefile had the following in the Makefile: MODULEPFX := brcmsmac obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o The way streamline-config.pl works, is parsing all the obj-$(CONFIG_FOO) += foo.o lines to find that CONFIG_FOO belongs to the module foo.ko. But in this case, the brcmsmac.o was not used, but a variable in its place. By changing streamline-config.pl to remember defined variables in Makefiles and substituting them when they are used in the obj-X lines, allows Thomas (and others) to have their brcmsmac module stay configured when it is loaded and running "make localmodconfig". Reported-by:
Thomas Lange <thomas-lange2@gmx.de> Tested-by:
-
Steven Rostedt authored
commit d060d963 upstream. Simplify the way lines ending with backslashes (continuation) in Makefiles is parsed. This is needed to implement a necessary fix. Tested-by:
-
Dan Carpenter authored
commit 6c06108b upstream. If ctrls->count is too high the multiplication could overflow and array_size would be lower than expected. Mauro and Hans Verkuil suggested that we cap it at 1024. That comes from the maximum number of controls with lots of room for expantion. $ grep V4L2_CID include/linux/videodev2.h | wc -l 211 Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alexander Elbs authored
commit dd8df17f upstream. This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468fc ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by:
Alexander Elbs <alex@segv.de> Acked-by:
Philip Rakity <prakity@marvell.com> Acked-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Aaron Lu authored
commit c6ced0db upstream. When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by:
Aaron Lu <aaron.lu@amd.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Girish K S authored
commit 913047e9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by:
Girish K S <girish.shivananjappa@linaro.org> Acked-by:
Subhash Jadavani <subhashj@codeaurora.org> Acked-by:
-
Jean Delvare authored
commit 7c1f59c9 upstream. When adding checks for ACPI resource conflicts to many bus drivers, not enough attention was paid to the error paths, and for several drivers this causes 0 to be returned on error in some cases. Fix this by properly returning a non-zero value on every error. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Artem Bityutskiy authored
commit d34315da upstream. Patch 56e46742 broke UBIFS debugging messages: before that commit when UBIFS debugging was enabled, users saw few useful debugging messages after mount. However, that patch turned 'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have to enable them first via /sys/kernel/debug/dynamic_debug/control, which is very impractical. This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just as it was before the breakage. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 72f0d453 upstream. Patch ab50ff68 broke UBI debugging messages: before that commit when UBI debugging was enabled, users saw few useful debugging messages after attaching an MTD device. However, that patch turned 'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have to enable them first via /sys/kernel/debug/dynamic_debug/control, which is very impractical. This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just as it was before the breakage. Signed-off-by:
-
Richard Weinberger authored
commit 4a59c797 upstream. Currently it's possible to create a volume without a name. E.g: ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N "" After that vtbl_check() will always fail because it does not permit empty strings. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ludwig Nussel authored
commit 9af0c7a6 upstream. On x86_32 casting the unsigned int result of get_random_int() to long may result in a negative value. On x86_32 the range of mmap_rnd() therefore was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended. The bug was introduced by 675a0813 ("x86: unify mmap_{32|64}.c") in January 2008. Signed-off-by:
Ludwig Nussel <ludwig.nussel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: harvey.harrison@gmail.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/201111152246.pAFMklOB028527@wpaz5.hot.corp.google.comSigned-off-by:
-
KAMEZAWA Hiroyuki authored
commit ab936cbc upstream. Commit ef6a3c63 ("mm: add replace_page_cache_page() function") added a function replace_page_cache_page(). This function replaces a page in the radix-tree with a new page. WHen doing this, memory cgroup needs to fix up the accounting information. memcg need to check PCG_USED bit etc. In some(many?) cases, 'newpage' is on LRU before calling replace_page_cache(). So, memcg's LRU accounting information should be fixed, too. This patch adds mem_cgroup_replace_page_cache() and removes the old hooks. In that function, old pages will be unaccounted without touching res_counter and new page will be accounted to the memcg (of old page). WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid races with LRU handling. Background: replace_page_cache_page() is called by FUSE code in its splice() handling. Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated page and may be on LRU. LRU mis-accounting will be critical for memory cgroup because rmdir() checks the whole LRU is empty and there is no account leak. If a page is on the other LRU than it should be, rmdir() will fail. This bug was added in March 2011, but no bug report yet. I guess there are not many people who use memcg and FUSE at the same time with upstream kernels. The result of this bug is that admin cannot destroy a memcg because of account leak. So, no panic, no deadlock. And, even if an active cgroup exist, umount can succseed. So no problem at shutdown. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 1140afa8 upstream. Since: commit 816c04fe Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.htmlReported-by:
Stuart D Gathman <stuart@gathman.org> Reported-by:
Kai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Larry Finger authored
commit d90db4b1 upstream. When downloading firmware into the device, the driver fails to check the return when allocating an skb. When the allocation fails, a BUG can be generated, as seen in https://bugzilla.redhat.com/show_bug.cgi?id=771656. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Bjorn Helgaas authored
commit eb31aae8 upstream. Some Dell BIOSes have MCFG tables that don't report the entire MMCONFIG area claimed by the chipset. If we move PCI devices into that claimed-but-unreported area, they don't work. This quirk reads the AMD MMCONFIG MSRs and adds PNP0C01 resources as needed to cover the entire area. Example problem scenario: BIOS-e820: 00000000cfec5400 - 00000000d4000000 (reserved) Fam 10h mmconf [d0000000, dfffffff] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xd0000000-0xd3ffffff] (base 0xd0000000) pnp 00:0c: [mem 0xd0000000-0xd3ffffff] pci 0000:00:12.0: reg 10: [mem 0xffb00000-0xffb00fff] pci 0000:00:12.0: no compatible bridge window for [mem 0xffb00000-0xffb00fff] pci 0000:00:12.0: BAR 0: assigned [mem 0xd4000000-0xd40000ff] Reported-by:
Lisa Salimbas <lisa.salimbas@canonical.com> Reported-by: <thuban@singularity.fr> Tested-by:
dann frazier <dann.frazier@canonical.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=31602 References: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/647043 References: https://bugzilla.redhat.com/show_bug.cgi?id=770308Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Roberto Sassu authored
commit 7b7e5916 upstream. Don't free a valid measurement entry on TPM PCR extend failure. Signed-off-by:
Roberto Sassu <roberto.sassu@polito.it> Signed-off-by:
Mimi Zohar <zohar@us.ibm.com> Signed-off-by:
-
Roberto Sassu authored
commit 45fae749 upstream. Info about new measurements are cached in the iint for performance. When the inode is flushed from cache, the associated iint is flushed as well. Subsequent access to the inode will cause the inode to be re-measured and will attempt to add a duplicate entry to the measurement list. This patch frees the duplicate measurement memory, fixing a memory leak. Signed-off-by:
-
Ian Campbell authored
commit 9e7860ce upstream. Haogang Chen found out that: There is a potential integer overflow in process_msg() that could result in cross-domain attack. body = kmalloc(msg->hdr.len + 1, GFP_NOIO | __GFP_HIGH); When a malicious guest passes 0xffffffff in msg->hdr.len, the subsequent call to xb_read() would write to a zero-length buffer. The other end of this connection is always the xenstore backend daemon so there is no guest (malicious or otherwise) which can do this. The xenstore daemon is a trusted component in the system. However this seem like a reasonable robustness improvement so we should have it. And Ian when read the API docs found that: The payload length (len field of the header) is limited to 4096 (XENSTORE_PAYLOAD_MAX) in both directions. If a client exceeds the limit, its xenstored connection will be immediately killed by xenstored, which is usually catastrophic from the client's point of view. Clients (particularly domains, which cannot just reconnect) should avoid this. so this patch checks against that instead. This also avoids a potential integer overflow pointed out by Haogang Chen. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Haogang Chen <haogangchen@gmail.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
nagalakshmi.nandigama@lsi.com authored
commit aff132d9 upstream. The amount of memory required for tracking chain buffers is rather large, and when the host credit count is big, memory allocation failure occurs inside __get_free_pages. The fix is to limit the number of chains to 100,000. In addition, the number of host credits is limited to 30,000 IOs. However this limitation can be overridden this using the command line option max_queue_depth. The algorithm for calculating the reply_post_queue_depth is changed so that it is equal to (reply_free_queue_depth + 16), previously it was (reply_free_queue_depth * 2). Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
nagalakshmi.nandigama@lsi.com authored
commit 30c43282 upstream. Added code to release the spinlock that is used to protect the raid device list before calling a function that can block. The blocking was causing a reschedule, and subsequently it is tried to acquire the same lock, resulting in a panic (NMI Watchdog detecting a CPU lockup). Signed-off-by:
-
Bjorn Helgaas authored
commit 5cf9a4e6 upstream. We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 24d25dbf upstream. This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Gary Hade authored
commit ae5cd864 upstream. This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by:
Gary Hade <garyhade@us.ibm.com> Reviewed-by:
-
Eric W. Biederman authored
commit a776c491 upstream. I traced a nasty kexec on panic boot failure to the fact that we had screaming msi interrupts and we were not disabling the msi messages at kernel startup. The booting kernel had not enabled those interupts so was not prepared to handle them. I can see no reason why we would ever want to leave the msi interrupts enabled at boot if something else has enabled those interrupts. The pci spec specifies that msi interrupts should be off by default. Drivers are expected to enable the msi interrupts if they want to use them. Our interrupt handling code reprograms the interrupt handlers at boot and will not be be able to do anything useful with an unexpected interrupt. This patch applies cleanly all of the way back to 2.6.32 where I noticed the problem. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Alex Williamson authored
commit 1830ea91 upstream. Spec shows this as 1010b = 0xa Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
