Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Rework the EFI capsule loader to allow for workarounds for
     non-compliant firmware (Ard Biesheuvel)

   - Implement a capsule loader quirk for Quark X102x (Jan Kiszka)

   - Enable SMBIOS/DMI support for the ARM architecture (Ard Biesheuvel)

   - Add CONFIG_EFI_PGT_DUMP=y support for x86-32 and kexec (Sai
     Praneeth)

   - Fixes for EFI support for Xen dom0 guests running under x86-64
     hosts (Daniel Kiper)"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen/efi: Initialize only the EFI struct members used by Xen
  efi: Process the MEMATTR table only if EFI_MEMMAP is enabled
  efi/arm: Enable DMI/SMBIOS
  x86/efi: Extend CONFIG_EFI_PGT_DUMP support to x86_32 and kexec as well
  efi/efi_test: Use memdup_user() helper
  efi/capsule: Add support for Quark security header
  efi/capsule-loader: Use page addresses rather than struct page pointers
  efi/capsule-loader: Redirect calls to efi_capsule_setup_info() via weak alias
  efi/capsule: Remove NULL test on kmap()
  efi/capsule-loader: Use a cached copy of the capsule header
  efi/capsule: Adjust return type of efi_capsule_setup_info()
  efi/capsule: Clean up pr_err/_info() messages
  efi/capsule: Remove pr_debug() on ENOMEM or EFAULT
  efi/capsule: Fix return code on failing kmap/vmap

Pull RCU updates from Ingo Molnar:
 "The sole purpose of these changes is to shrink and simplify the RCU
  code base, which has suffered from creeping bloat over the past couple
  of years. The end result is a net removal of ~2700 lines of code:

     79 files changed, 1496 insertions(+), 4211 deletions(-)

  Plus there's a marked reduction in the Kconfig space complexity as
  well, here's the number of matches on 'grep RCU' in the .config:

                               before       after

     x86-defconfig                 17          15
     x86-allmodconfig              33          20"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
  rcu: Remove RCU CPU stall warnings from Tiny RCU
  rcu: Remove event tracing from Tiny RCU
  rcu: Move RCU debug Kconfig options to kernel/rcu
  rcu: Move RCU non-debug Kconfig options to kernel/rcu
  rcu: Eliminate NOCBs CPU-state Kconfig options
  rcu: Remove debugfs tracing
  srcu: Remove Classic SRCU
  srcu: Fix rcutorture-statistics typo
  rcu: Remove SPARSE_RCU_POINTER Kconfig option
  rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig option
  rcu: Remove typecheck() from RCU locking wrapper functions
  rcu: Remove #ifdef moving rcu_end_inkernel_boot from rcupdate.h
  rcu: Remove nohz_full full-system-idle state machine
  rcu: Remove the RCU_KTHREAD_PRIO Kconfig option
  rcu: Remove *_SLOW_* Kconfig options
  srcu: Use rnp->lock wrappers to replace explicit memory barriers
  rcu: Move rnp->lock wrappers for SRCU use
  rcu: Convert rnp->lock wrappers to macros for SRCU use
  rcu: Refactor #includes from include/linux/rcupdate.h
  bcm47xx: Fix build regression
  ...

Pull objtool updates from Ingo Molnar:
 "This is an extensive rewrite of the objdump tool to track all stack
  pointer modifications through the machine instructions of disassembled
  functions found in kernel .o files.

  This re-design removes the prior dependency on CONFIG_FRAME_POINTERS,
  with the goal to prepare the tool to generate kernel debuginfo data in
  the future. There's also an increase in checking/tracking robustness
  as a side effect as well.

  No (intended) changes to existing functionality"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Silence warnings for functions which use IRET
  objtool: Implement stack validation 2.0
  objtool, x86: Add several functions and files to the objtool whitelist
  objtool: Move checking code to check.c

Pull EDAC updates from Borislav Petkov:
 "Nothing earth-shattering - just the normal development flow of
  cleanups, improvements, fixes and such.

  Summary:

   - i31200_edac: Add Kabylake support (Jason Baron)

   - sb_edac: resolve memory controller detection issues on asymmetric
     setups with not all DIMM slots being populated (Tony Luck and Qiuxu
     Zhuo)

   - misc cleanups and fixlets all over"

* tag 'edac_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
  EDAC, pnd2: Fix Apollo Lake DIMM detection
  EDAC, i5000, i5400: Fix definition of NRECMEMB register
  EDAC, pnd2: Make function sbi_send() static
  EDAC, pnd2: Return proper error value from apl_rd_reg()
  EDAC, altera: Simplify calculation of total memory
  EDAC, sb_edac: Avoid creating SOCK memory controller
  EDAC, mce_amd: Fix typo in SMCA error description
  EDAC, mv64x60: Sanity check edac_op_state before registering
  EDAC, thunderx: Fix a warning during l2c debugfs node creation
  EDAC, mv64x60: Check driver registration success
  EDAC, ie31200: Add Intel Kaby Lake CPU support
  EDAC, mv64x60: Replace in_le32()/out_le32() with readl()/writel()
  EDAC, mv64x60: Fix pdata->name
  EDAC, sb_edac: Bump driver version and do some cleanups
  EDAC, sb_edac: Check if ECC enabled when at least one DIMM is present
  EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4
  EDAC, sb_edac: Carve out dimm-populating loop
  EDAC, sb_edac: Fix mod_name
  EDAC, sb_edac: Assign EDAC memory controller per h/w controller
  EDAC, sb_edac: Don't use "Socket#" in the memory controller name
  ...

Pull core block/IO updates from Jens Axboe:
 "This is the main pull request for the block layer for 4.13. Not a huge
  round in terms of features, but there's a lot of churn related to some
  core cleanups.

  Note this depends on the UUID tree pull request, that Christoph
  already sent out.

  This pull request contains:

   - A series from Christoph, unifying the error/stats codes in the
     block layer. We now use blk_status_t everywhere, instead of using
     different schemes for different places.

   - Also from Christoph, some cleanups around request allocation and IO
     scheduler interactions in blk-mq.

   - And yet another series from Christoph, cleaning up how we handle
     and do bounce buffering in the block layer.

   - A blk-mq debugfs series from Bart, further improving on the support
     we have for exporting internal information to aid debugging IO
     hangs or stalls.

   - Also from Bart, a series that cleans up the request initialization
     differences across types of devices.

   - A series from Goldwyn Rodrigues, allowing the block layer to return
     failure if we will block and the user asked for non-blocking.

   - Patch from Hannes for supporting setting loop devices block size to
     that of the underlying device.

   - Two series of patches from Javier, fixing various issues with
     lightnvm, particular around pblk.

   - A series from me, adding support for write hints. This comes with
     NVMe support as well, so applications can help guide data placement
     on flash to improve performance, latencies, and write
     amplification.

   - A series from Ming, improving and hardening blk-mq support for
     stopping/starting and quiescing hardware queues.

   - Two pull requests for NVMe updates. Nothing major on the feature
     side, but lots of cleanups and bug fixes. From the usual crew.

   - A series from Neil Brown, greatly improving the bio rescue set
     support. Most notably, this kills the bio rescue work queues, if we
     don't really need them.

   - Lots of other little bug fixes that are all over the place"

* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
  lightnvm: pblk: set line bitmap check under debug
  lightnvm: pblk: verify that cache read is still valid
  lightnvm: pblk: add initialization check
  lightnvm: pblk: remove target using async. I/Os
  lightnvm: pblk: use vmalloc for GC data buffer
  lightnvm: pblk: use right metadata buffer for recovery
  lightnvm: pblk: schedule if data is not ready
  lightnvm: pblk: remove unused return variable
  lightnvm: pblk: fix double-free on pblk init
  lightnvm: pblk: fix bad le64 assignations
  nvme: Makefile: remove dead build rule
  blk-mq: map all HWQ also in hyperthreaded system
  nvmet-rdma: register ib_client to not deadlock in device removal
  nvme_fc: fix error recovery on link down.
  nvmet_fc: fix crashes on bad opcodes
  nvme_fc: Fix crash when nvme controller connection fails.
  nvme_fc: replace ioabort msleep loop with completion
  nvme_fc: fix double calls to nvme_cleanup_cmd()
  nvme-fabrics: verify that a controller returns the correct NQN
  nvme: simplify nvme_dev_attrs_are_visible
  ...

Pull uuid subsystem from Christoph Hellwig:
 "This is the new uuid subsystem, in which Amir, Andy and I have started
  consolidating our uuid/guid helpers and improving the types used for
  them. Note that various other subsystems have pulled in this tree, so
  I'd like it to go in early.

  UUID/GUID summary:

   - introduce the new uuid_t/guid_t types that are going to replace the
     somewhat confusing uuid_be/uuid_le types and make the terminology
     fit the various specs, as well as the userspace libuuid library.
     (me, based on a previous version from Amir)

   - consolidated generic uuid/guid helper functions lifted from XFS and
     libnvdimm (Amir and me)

   - conversions to the new types and helpers (Amir, Andy and me)"

* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
  ACPI: hns_dsaf_acpi_dsm_guid can be static
  mmc: sdhci-pci: make guid intel_dsm_guid static
  uuid: Take const on input of uuid_is_null() and guid_is_null()
  thermal: int340x_thermal: fix compile after the UUID API switch
  thermal: int340x_thermal: Switch to use new generic UUID API
  acpi: always include uuid.h
  ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
  ACPI / extlog: Switch to use new generic UUID API
  ACPI / bus: Switch to use new generic UUID API
  ACPI / APEI: Switch to use new generic UUID API
  acpi, nfit: Switch to use new generic UUID API
  MAINTAINERS: add uuid entry
  tmpfs: generate random sb->s_uuid
  scsi_debug: switch to uuid_t
  nvme: switch to uuid_t
  sysctl: switch to use uuid_t
  partitions/ldm: switch to use uuid_t
  overlayfs: use uuid_t instead of uuid_be
  fs: switch ->s_uuid to uuid_t
  ima/policy: switch to use uuid_t
  ...

Signed-off-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MIPS fixes from Ralf Baechle:
 "Here's a final round of fixes for 4.12:

   - Fix misordered instructions in assembly code making kenel startup
     via UHB unreliable.

   - Fix special case of MADDF and MADDF emulation.

   - Fix alignment issue in address calculation in pm-cps on 64 bit.

   - Fix IRQ tracing & lockdep when rescheduling

   - Systems with MAARs require post-DMA cache flushes.

  The reordering fix and the MADDF/MSUBF fix have sat in linux-next for
  a number of days. The others haven't propagated from my pull tree to
  linux-next yet but all have survived manual testing and Imagination's
  automated test system and there are no pending bug reports"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Avoid accidental raw backtrace
  MIPS: Perform post-DMA cache flushes on systems with MAARs
  MIPS: Fix IRQ tracing & lockdep when rescheduling
  MIPS: pm-cps: Drop manual cache-line alignment of ready_count
  MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
  MIPS: head: Reorder instructions missing a delay slot

Pull ARM fix from Russell King:
 "One final fix for 4.12 - Doug found a boot failure case triggered by
  requesting a non-even MB vmalloc size"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8685/1: ensure memblock-limit is pmd-aligned

Pull x86 fixes from Thomas Gleixner:
 "Fixlets for x86:

   - Prevent kexec crash when KASLR is enabled, which was caused by an
     address calculation bug

   - Restore the freeing of PUDs on memory hot remove

   - Correct a negated pointer check in the intel uncore performance
     monitoring driver

   - Plug a memory leak in an error exit path in the RDT code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Fix memory leak on mount failure
  x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
  x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
  perf/x86/intel/uncore: Fix wrong box pointer check
  x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD

Pull perf fix from Thomas Gleixner:
 "The last fix for perf for this cycles:

   - Prevent a segfault when kernel.kptr_restrict=2 is set by avoiding a
     null pointer dereference"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf machine: Fix segfault for kernel.kptr_restrict=2

Pull pinctrl fix from Linus Walleij:
 "Brian noticed that this regression has not got a proper fix for the
  entire merge window and consequently we need to revert the offending
  commit.

  It's part of the RT-mainstream work, the dance goes like this, two
  steps forward, one step back.

  Summary:

   - A last fix for v4.12, an IRQ problem reported early in the merge
     window appears not to have been properly fixed, so the offending
     commit will be reverted and we will find the proper fix for v4.13.
     Hopefully"

* tag 'pinctrl-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip"

Pull last minute fixes for GPIO from Linus Walleij:

 - Fix another ACPI problem with broken BIOSes.

 - Filter out the right GPIO events, making a very user-visible bug go
   away.

* tag 'gpio-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan
  gpiolib: fix filtering out unwanted events

Pull last-minute tracing fixes from Steven Rostedt:
 "Two fixes:

  One is for a crash when using the :mod: trace probe command into
  stack_trace_filter. This bug was introduced during the last merge
  window.

  The other was there forever. It's a small bug that makes it impossible
  to name a module function for kprobes when the module starts with a
  digit"

* tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Allow to create probe with a module name starting with a digit
  ftrace: Fix regression with module command in stack_trace_filter

uapi/linux/a.out.h uses a number of predefined macros that are
deprecated because they're in the application namespace
(e.g. '#ifdef linux' instead of '#ifdef __linux__').
This patch either corrects or just removes them if they are not
applicable to Linux.

The primary reason this is worth bothering to fix, considering how
obsolete a.out binary support is, is that the GCC build process
considers this such a severe error that it will copy the header into a
private directory and change the macro names, which causes future
updates to the header to be masked.  This header probably doesn't get
updated very often anymore, but it is the _only_ uapi header that gets
this treatment, so IMHO it is worth patching just to drive that number
all the way to zero.
Signed-off-by: Zack Weinberg <zackw@panix.com>
[hch: removed dead conditionals]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"in a rcu enabled hashtable" is repeated twice in a comment.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If mount fails, the kn_info directory is not freed causing memory leak.

Add the missing error handling path.

Fixes: 4e978d06 ("x86/intel_rdt: Add "info" files to resctrl file system")
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: vikas.shivappa@intel.com
Cc: andi.kleen@intel.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498503368-20173-3-git-send-email-vikas.shivappa@linux.intel.com

Pull powerpc fixes from Michael Ellerman:
 "Hopefully the last two powerpc fixes for 4.12.

  The CXL one is larger than I'd usually send at rc7, but it fixes new
  code this cycle, so better to have it working for the release. It was
  actually sent a few weeks back but got blocked in testing behind
  another fix that was causing issues.

  We are still tracking one crash in v4.12-rc7, but only one person has
  reproduced it and the commit identified by bisect doesn't touch any of
  the relevant code, so I think it's 50/50 whether that commit is
  actually the problem or it's some code layout / toolchain issue.

  Two fixes for code we merged this cycle:

   - cxl: Fixes for Coherent Accelerator Interface Architecture 2.0

   - Avoid miscompilation w/GCC 4.6.3 on 32-bit - don't inline
     copy_to/from_user()

  Thanks to Al Viro, Larry Finger, Christophe Lombard"

* tag 'powerpc-4.12-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Avoid miscompilation w/GCC 4.6.3 - don't inline copy_to/from_user()
  cxl: Fixes for Coherent Accelerator Interface Architecture 2.0

Previously, objtool ignored functions which have the IRET instruction
in them.  That's because it assumed that such functions know what
they're doing with respect to frame pointers.

With the new "objtool 2.0" changes, it stopped ignoring such functions,
and started complaining about them:

  arch/x86/kernel/alternative.o: warning: objtool: do_sync_core()+0x1b: unsupported instruction in callable function
  arch/x86/kernel/alternative.o: warning: objtool: text_poke()+0x1a8: unsupported instruction in callable function
  arch/x86/kernel/ftrace.o: warning: objtool: do_sync_core()+0x16: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: machine_check_poll()+0x166: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: do_machine_check()+0x147: unsupported instruction in callable function

Silence those warnings for now.  They can be re-enabled later, once we
have unwind hints which will allow the code to annotate the IRET usages.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: baa41469 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/20170630140934.mmwtpockvpupahro@trebleSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull IOMMU fixes from Joerg Roedel:
 "Two fixes:

   - A fix for AMD IOMMU interrupt remapping code when IRQs are
     forwarded directly to KVM guests

   - Fixed check in the recently merged code to allow tboot with
     Intel VT-d disabled"

* tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix interrupt remapping when disable guest_mode
  iommu/vt-d: Correctly disable Intel IOMMU force on

Pull sound fixes from Takashi Iwai:
 "Two last-minute HD-audio fixes"

* tag 'sound-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix endless loop of codec configure
  ALSA: hda - set input_path bitmap to zero after moving it to new place

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs in copy-up code. One introduced in 4.11 and one in
  4.12-rc"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: don't set origin on broken lower hardlink
  ovl: copy-up: don't unlock between lookup and link

Do bitmap checks only when debug mode is enable. The line bitmap used
for mapping to physical addresses is fairly large (~512KB) and it is
expensive to do this checks on the fast path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When a read is directed to the cache, we risk that the lba has been
updated during the time we made the L2P table lookup and the time we are
actually reading form the cache. We intentionally not hold the L2P lock
not to block other threads.

While strict ordering is not a guarantee at this level (unless REQ_FLUSH
has been previously issued), we have experience that some databases that
have recently implemented direct I/O support, issue metadata reads very
close to the writes, without issuing a fsync in the middle. An easy way
to support them while they is to make an extra effort and check the L2P
map right before reading the cache.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a sanity check to the pblk initialization sequence in order to
ensure that enough LUNs have been allocated to store the line metadata.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When removing a pblk instance, pad the current line using asynchronous
I/O. This reduces the removal time from ~1 minute in the worst case to a
couple of seconds.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For now, we allocate a per I/O buffer for GC data. Since the potential
size of the buffer is 256KB and GC is not in the fast path, do this
allocation with vmalloc. This puts lets pressure on the memory
allocator at no performance cost.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix bad metadata buffer assignations introduced when refactoring the
medatada write path.

Fixes: dd2a4343 lightnvm: pblk: sched. metadata on write thread
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When user threads place data into the write buffer, they reserve space
and do the memory copy out of the lock. As a consequence, when the write
thread starts persisting data, there is a chance that it is not copied
yet. In this case, avoid polling, and schedule before retrying.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove unused variable.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Prevent pblk->lines being double freed in case of an error during pblk
initialization.

Fixes: dd2a4343: "lightnvm: pblk: sched. metadata on write thread"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the right types and conversions on le64 variables. Reported by
sparse.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is a major rewrite of objtool.  Instead of only tracking frame
pointer changes, it now tracks all stack-related operations, including
all register saves/restores.

In addition to making stack validation more robust, this also paves the
way for undwarf generation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

In preparation for an objtool rewrite which will have broader checks,
whitelist functions and files which cause problems because they do
unusual things with the stack.

These whitelists serve as a TODO list for which functions and files
don't yet have undwarf unwinder coverage.  Eventually most of the
whitelists can be removed in favor of manual CFI hint annotations or
objtool improvements.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/7f934a5d707a574bda33ea282e9478e627fb1829.1498659915.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Kernel text KASLR is separated into physical address and virtual
address randomization. And for virtual address randomization, we
only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE.
So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR,
but not the original kernel loading address 'output'.

The bug will cause kernel boot failure if kernel is loaded at a different
position than the address, 16M, which is decided at compiled time.
Kexec/kdump is such practical case.

To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial
value.
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8391c73c ("x86/KASLR: Randomize virtual address separately")
Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

For kernel text KASLR, the virtual address is confined to area of 1G,
[0xffffffff80000000, 0xffffffffc0000000). For the implemenataion of
virtual address randomization, we only randomize to get an offset
between 16M and 1G, then add this offset to the starting address,
0xffffffff80000000. Here 16M is the offset which is decided at linking
stage. So the amount of the local variable 'virt_addr' which respresents
the offset plus the kernel output size can not exceed KERNEL_IMAGE_SIZE.

Add a debug check for the offset. If out of bounds, print error
message and hang there.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1498567146-11990-2-git-send-email-bhe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.

This allows creating a probe such as:

    p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0

Which is necessary for this command to work:

    perf probe -m 8021q -a vlan_gro_receive

Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net

Cc: stable@vger.kernel.org
Fixes: 413d37d1 ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since commit 81a76d71 ("MIPS: Avoid using unwind_stack() with
usermode") show_backtrace() invokes the raw backtracer when
cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels
where user and kernel address spaces overlap.

However this is used by show_stack() which creates its own pt_regs on
the stack and leaves cp0_status uninitialised in most of the code paths.
This results in the non deterministic use of the raw back tracer
depending on the previous stack content.

show_stack() deals exclusively with kernel mode stacks anyway, so
explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure
we get a useful backtrace.

Fixes: 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/16656/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>