Skip to content

L
linux
Switch branch/tag
  1. 21 Apr, 2012 5 commits
    • Lee Jones's avatar
      drivers/net: Do not free an IRQ if its request failed · 163faf31
      Lee Jones authored 
      Refrain from attempting to free an interrupt line if the request
fails and hence, there is no IRQ to free.

CC: netdev@vger.kernel.org
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      163faf31
    • Eric Dumazet's avatar
      drop_monitor: allow more events per second · bbe362be
      Eric Dumazet authored 
      It seems there is a logic error in trace_drop_common(), since we store
only 64 drops, even if they are from same location.

This fix is a one liner, but we probably need more work to avoid useless
atomic dec/inc

Now I can watch 1 Mpps drops through dropwatch...
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbe362be
    • Matt Renzelmann's avatar
      ks8851: Fix request_irq/free_irq mismatch · e8195b24
      Matt Renzelmann authored 
      The dev_id parameter passed to free_irq needs to match the one passed
to the corresponding request_irq.
Signed-off-by: default avatarMatt Renzelmann <mjr@cs.wisc.edu>
Acked-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8195b24
    • Wenqi Ma's avatar
      net/hyperv: Adding cancellation to ensure rndis filter is closed · 792df872
      Wenqi Ma authored 
      Although the network interface is down, the RX packets number which
could be observed by ifconfig may keep on increasing.

This is because the WORK scheduled in netvsc_set_multicast_list()
may be executed after netvsc_close(). That means the rndis filter
may be re-enabled by do_set_multicast() even if it was closed by
netvsc_close().

By canceling possible WORK before close the rndis filter, the issue
could be never happened.
Signed-off-by: default avatarWenqi Ma <wenqi_ma@trendmicro.com.cn>
Reviewed-by: default avatarWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      792df872
    • Stephen Boyd's avatar
      ks8851: Fix mutex deadlock in ks8851_net_stop() · c5a99937
      Stephen Boyd authored 
      There is a potential deadlock scenario when the ks8851 driver
is removed. The interrupt handler schedules a workqueue which
acquires a mutex that ks8851_net_stop() also acquires before
flushing the workqueue. Previously lockdep wouldn't be able
to find this problem but now that it has the support we can
trigger this lockdep warning by rmmoding the driver after
an ifconfig up.

Fix the possible deadlock by disabling the interrupts in
the chip and then release the lock across the workqueue
flushing. The mutex is only there to proect the registers
anyway so this should be ok.

=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.21-00021-g8b33780-dirty #2911
-------------------------------------------------------
rmmod/125 is trying to acquire lock:
 ((&ks->irq_work)){+.+...}, at: [<c019e0b8>] flush_work+0x0/0xac

but task is already holding lock:
 (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&ks->lock){+.+...}:
       [<c01b89c8>] __lock_acquire+0x940/0x9f8
       [<c01b9058>] lock_acquire+0x10c/0x130
       [<c083dbec>] mutex_lock_nested+0x68/0x3dc
       [<bf00bd48>] ks8851_irq_work+0x24/0x46c [ks8851]
       [<c019c580>] process_one_work+0x2d8/0x518
       [<c019cb98>] worker_thread+0x220/0x3a0
       [<c01a2ad4>] kthread+0x88/0x94
       [<c0107008>] kernel_thread_exit+0x0/0x8

-> #0 ((&ks->irq_work)){+.+...}:
       [<c01b7984>] validate_chain+0x914/0x1018
       [<c01b89c8>] __lock_acquire+0x940/0x9f8
       [<c01b9058>] lock_acquire+0x10c/0x130
       [<c019e104>] flush_work+0x4c/0xac
       [<bf00b858>] ks8851_net_stop+0x6c/0x138 [ks8851]
       [<c06b209c>] __dev_close_many+0x98/0xcc
       [<c06b2174>] dev_close_many+0x68/0xd0
       [<c06b22ec>] rollback_registered_many+0xcc/0x2b8
       [<c06b2554>] rollback_registered+0x28/0x34
       [<c06b25b8>] unregister_netdevice_queue+0x58/0x7c
       [<c06b25f4>] unregister_netdev+0x18/0x20
       [<bf00c1f4>] ks8851_remove+0x64/0xb4 [ks8851]
       [<c049ddf0>] spi_drv_remove+0x18/0x1c
       [<c0468e98>] __device_release_driver+0x7c/0xbc
       [<c0468f64>] driver_detach+0x8c/0xb4
       [<c0467f00>] bus_remove_driver+0xb8/0xe8
       [<c01c1d20>] sys_delete_module+0x1e8/0x27c
       [<c0105ec0>] ret_fast_syscall+0x0/0x3c

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ks->lock);
                               lock((&ks->irq_work));
                               lock(&ks->lock);
  lock((&ks->irq_work));

 *** DEADLOCK ***

4 locks held by rmmod/125:
 #0:  (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f44>] driver_detach+0x6c/0xb4
 #1:  (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f50>] driver_detach+0x78/0xb4
 #2:  (rtnl_mutex){+.+.+.}, at: [<c06b25e8>] unregister_netdev+0xc/0x20
 #3:  (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851]

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c5a99937
  3. 19 Apr, 2012 5 commits
  5. 18 Apr, 2012 12 commits
  7. 17 Apr, 2012 10 commits
  9. 16 Apr, 2012 2 commits
  11. 14 Apr, 2012 3 commits
  13. 13 Apr, 2012 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7