New cfm flower test case is added to the net forwarding selfttests.

Example output:

 # ./tc_flower_cfm.sh p1 p2
 TEST: CFM opcode match test                                         [ OK ]
 TEST: CFM level match test                                          [ OK ]
 TEST: CFM opcode and level match test                               [ OK ]
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support to the tc flower classifier to match based on fields in CFM
information elements like level and opcode.

tc filter add dev ens6 ingress protocol 802.1q \
	flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \
	action drop
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for dissecting cfm packets. The cfm packet header
fields maintenance domain level and opcode can be dissected.
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After commit b8a1a4cd ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f4 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
PHYs which require calibration data from the SoC's efuse.
Despite the similar design the driver doesn't share any code with the
existing mediatek-ge.c.
Add support for such PHYs by introducing a new driver with basic
support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx5-updates-2023-06-09

1) Embedded CPU Virtual Functions
2) Lightweight local SFs

Daniel Jurgens says:
====================
Embedded CPU Virtual Functions

This series enables the creation of virtual functions on Bluefield (the
embedded CPU platform). Embedded CPU virtual functions (EC VFs). EC VF
creation, deletion and management interfaces are the same as those for
virtual functions in a server with a Connect-X NIC.

When using EC VFs on the ARM the creation of virtual functions on the
host system is still supported. Host VFs eswitch vports occupy a range
of 1..max_vfs, the EC VF vport range is max_vfs+1..max_ec_vfs.

Every function (PF, ECPF, VF, EC VF, and subfunction) has a function ID
associated with it. Prior to this series the function ID and the eswitch
vport were the same. That is no longer the case, the EC VF function ID
range is 1..max_ec_vfs. When querying or setting the capabilities of an
EC VF function an new bit must be set in the query/set HCA cap
structure.

This is a high level overview of the changes made:
	- Allocate vports for EC VFs if they are enabled.
	- Create representors and devlink ports for the EC VF vports.
	- When querying/setting HCA caps by vport break the assumption
	  that function ID is the same a vport number and adjust
	  accordingly.
	- Create a new type of page, so that when SRIOV on the ARM is
	  disabled, but remains enabled on the host, the driver can
	  wait for the correct pages.
	- Update SRIOV code to support EC VF creation/deletion.

===================

Lightweight local SFs:

Last 3 patches form Shay Drory:

SFs are heavy weight and by default they come with the full package of
ConnectX features. Usually users want specialized SFs for one specific
purpose and using devlink users will almost always override the set of
advertises features of an SF and reload it.

Shay Drory says:
================
In order to avoid the wasted time and resources on the reload, local SFs
will probe without any auxiliary sub-device, so that the SFs can be
configured prior to its full probe.

The defaults of the enable_* devlink params of these SFs are set to
false.

Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
               hw_addr 00:00:00:00:00:11 state active

Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
              name enable_eth value true cmode driverinit

Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1

At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.

================

Eric Dumazet says:

====================
tcp: tx path fully headless

This series completes transition of TCP stack tx path
to headless packets : All payload now reside in page frags,
never in skb->head.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now all tcp_stream_alloc_skb() callers pass @size == 0, we can
remove this parameter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now all skbs in write queue do not contain any payload in skb->head,
we can remove some dead code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_send_syn_data() is the last component in TCP transmit
path to put payload in skb->head.

Switch it to use page frags, so that we can remove dead
code later.

This allows to put more payload than previous implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: support extack in dump and simplify ethtool uAPI

Ethtool currently requires header nest to be always present even if
it doesn't have to carry any attr for a given request. This inflicts
unnecessary pain on the users.

What makes it worse is that extack was not working in dump's ->start()
callback. Address both of those issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool currently requires a header nest (which is used to carry
the common family options) in all requests including dumps.

  $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
  lib.ynl.NlError: Netlink error: Invalid argument
  nl_len = 64 (48) nl_flags = 0x300 nl_type = 2
	error: -22      extack: {'msg': 'request header missing'}

  $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get \
           --json '{"header":{}}';  )
  [{'combined-count': 1,
    'combined-max': 1,
    'header': {'dev-index': 2, 'dev-name': 'enp1s0'}}]

Requiring the header nest to always be there may seem nice
from the consistency perspective, but it's not serving any
practical purpose. We shouldn't burden the user like this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4a19edb6 ("netlink: Pass extack to dump handlers")
added extack support to netlink dumps. It was focused on rtnl
and since rtnl does not use ->start(), ->done() callbacks
it ignored those. Genetlink on the other hand uses ->start()
extensively, for parsing and input validation.

Pass the extact in via struct netlink_dump_control and link
it to cb for the time of ->start(). Both struct netlink_dump_control
and extack itself live on the stack so we can't keep the same
extack for the duration of the dump. This means that the extack
visible in ->start() and each ->dump() callbacks will be different.
Corner cases like reporting a warning message in DONE across dump
calls are still not supported.

We could put the extack (for dumps) in the socket struct,
but layering makes it slightly awkward (extack pointer is decided
before the DO / DUMP split).

The genetlink dump error extacks are now surfaced:

  $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
  lib.ynl.NlError: Netlink error: Invalid argument
  nl_len = 64 (48) nl_flags = 0x300 nl_type = 2
	error: -22	extack: {'msg': 'request header missing'}

Previously extack was missing:

  $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
  lib.ynl.NlError: Netlink error: Invalid argument
  nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
	error: -22
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tools: ynl: generate code for the ethtool family

And finally ethtool support. Thanks to Stan's work the ethtool family
spec is quite complete, so there is a lot of operations to support.

I chickened out of stats-get support, they require at the very least
type-value support on a u64 scalar. Type-value is an arrangement where
a u16 attribute is encoded directly in attribute type. Code gen can
support this if the inside is a nest, we just throw in an extra
field into that nest to carry the attr type. But a little more coding
is needed to for a scalar, because first we need to turn the scalar
into a struct with one member, then we can add the attr type.

Other than that ethtool required event support (notification which
does not share contents with any GET), but the previous series
already added that to the codegen.

I haven't tested all the ops here, and a few I tried seem to work.
====================
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configuring / reading ring sizes and counts is a fairly common
operation for ethtool netlink. Present a sample doing that with
YNL:

$ ./ethtool
Channels:
    enp1s0: combined 1
   eni1np1: combined 1
   eni2np1: combined 1
Rings:
    enp1s0: rx 256 tx 256
   eni1np1: rx 0 tx 0
   eni2np1: rx 0 tx 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Generate the protocol code for ethtool. Skip the stats
for now, they are the only outlier in terms of complexity.
Stats are a sort-of semi-polymorphic (attr space of a nest
depends on value of another attr) or a type-value-scalar,
depending on how one wants to look at it...
A challenge for another time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pad is a separate type. Even though in practice they can
only be a u32 the value should be discarded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code gen for stats is a bit of a challenge, but from looking
at the attrs I think that the format isn't quite right.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP tunnel and cable test messages have a lot of nests,
which do not match the names of the enum entries in C uAPI.
Some of the structure / nesting also looks wrong.

Untangle this a little bit based on the names, comments and
educated guesses, I haven't actually tested the results.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

C does not allow defining structures and enums with the same name.
Since enum ethtool_stringset exists in the uAPI we need to include
at least a stub of it in the spec. This will trigger name collision
avoidance in the code gen.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool has an attribute set called stringset, from which
we'll generate struct ethtool_stringset. Unfortunately,
the old ethtool header declares enum ethtool_stringset
(the same name), to which compilers object.

This seems unavoidable. Check struct names against known
constants and append an underscore if conflict is detected.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If attr set or enum has empty enum name we need to use u32 or int
as function arguments and struct members.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of the C enum names are guessed correctly, but there
is a handful of corner cases we need to name explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool's PSE PoDL has a attr nest with different prefixes:

/* Power Sourcing Equipment */
enum {
	ETHTOOL_A_PSE_UNSPEC,
	ETHTOOL_A_PSE_HEADER,			/* nest - _A_HEADER_* */
	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u32 */
	ETHTOOL_A_PODL_PSE_ADMIN_CONTROL,	/* u32 */
	ETHTOOL_A_PODL_PSE_PW_D_STATUS,		/* u32 */

Header has a prefix of ETHTOOL_A_PSE_ and other attrs prefix of
ETHTOOL_A_PODL_PSE_ we can't cover them uniformly.
If PODL was after PSE life would be easy.

Now we either need to add prefixes to attr names which is yucky
or support setting prefix name per attr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ynl-regen needs to know the arguments used to generate a file.
Record excluded ops and, while at it, user headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool family has a small handful of quite tricky ops
and a lot of simple very useful ops. Teach ynl-gen to skip
ops so that we can bypass the tricky ones.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Mikhalitsyn says:

====================
Add SCM_PIDFD and SO_PEERPIDFD

1. Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.

2. Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd.
This thing is direct analog of SO_PEERCRED which allows to get plain PID.

3. Add SCM_PIDFD / SO_PEERPIDFD kselftest

Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/

Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this and Luca Boccassi for testing and reviewing this.

=== Motivation behind this patchset

Eric Dumazet raised a question:
> It seems that we already can use pidfd_open() (since linux-5.3), and
> pass the resulting fd in af_unix SCM_RIGHTS message ?

Yes, it's possible, but it means that from the receiver side we need
to trust the sent pidfd (in SCM_RIGHTS),
or always use combination of SCM_RIGHTS+SCM_CREDENTIALS, then we can
extract pidfd from SCM_RIGHTS,
then acquire plain pid from pidfd and after compare it with the pid
from SCM_CREDENTIALS.

A few comments from other folks regarding this.

Christian Brauner wrote:

>Let me try and provide some of the missing background.

>There are a range of use-cases where we would like to authenticate a
>client through sockets without being susceptible to PID recycling
>attacks. Currently, we can't do this as the race isn't fully fixable.
>We can only apply mitigations.

>What this patchset will allows us to do is to get a pidfd without the
>client having to send us an fd explicitly via SCM_RIGHTS. As that's
>already possibly as you correctly point out.

>But for protocols like polkit this is quite important. Every message is
>standalone and we would need to force a complete protocol change where
>we would need to require that every client allocate and send a pidfd via
>SCM_RIGHTS. That would also mean patching through all polkit users.

>For something like systemd-journald where we provide logging facilities
>and want to add metadata to the log we would also immensely benefit from
>being able to get a receiver-side controlled pidfd.

>With the message type we envisioned we don't need to change the sender
>at all and can be safe against pid recycling.

>Link: https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/154
>Link: https://uapi-group.org/kernel-features

Lennart Poettering wrote:

>So yes, this is of course possible, but it would mean the pidfd would
>have to be transported as part of the user protocol, explicitly sent
>by the sender. (Moreover, the receiver after receiving the pidfd would
>then still have to somehow be able to prove that the pidfd it just
>received actually refers to the peer's process and not some random
>process. – this part is actually solvable in userspace, but ugly)

>The big thing is simply that we want that the pidfd is associated
>*implicity* with each AF_UNIX connection, not explicitly. A lot of
>userspace already relies on this, both in the authentication area
>(polkit) as well as in the logging area (systemd-journald). Right now
>using the PID field from SO_PEERCREDS/SCM_CREDENTIALS is racy though
>and very hard to get right. Making this available as pidfd too, would
>solve this raciness, without otherwise changing semantics of it all:
>receivers can still enable the creds stuff as they wish, and the data
>is then implicitly appended to the connections/datagrams the sender
>initiates.

>Or to turn this around: things like polkit are typically used to
>authenticate arbitrary dbus methods calls: some service implements a
>dbus method call, and when an unprivileged client then issues that
>call, it will take the client's info, go to polkit and ask it if this
>is ok. If we wanted to send the pidfd as part of the protocol we
>basically would have to extend every single method call to contain the
>client's pidfd along with it as an additional argument, which would be
>a massive undertaking: it would change the prototypes of basically
>*all* methods a service defines… And that's just ugly.

>Note that Alex' patch set doesn't expose anything that wasn't exposed
>before, or attach, propagate what wasn't before. All it does, is make
>the field already available anyway (the struct ucred .pid field)
>available also in a better way (as a pidfd), to solve a variety of
>races, with no effect on the protocol actually spoken within the
>AF_UNIX transport. It's a seamless improvement of the status quo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's make CONFIG_UNIX a bool instead of a tristate.
We've decided to do that during discussion about SCM_PIDFD patchset [1].

[1] https://lore.kernel.org/lkml/20230524081933.44dc8bea@kernel.org/

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Basic test to check consistency between:
- SCM_CREDENTIALS and SCM_PIDFD
- SO_PEERCRED and SO_PEERPIDFD

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SO_PEERPIDFD which allows to get pidfd of peer socket holder pidfd.
This thing is direct analog of SO_PEERCRED which allows to get plain PID.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.

We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because
it depends on a pidfd_prepare() API which is not exported to the kernel
modules.

Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/

Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
mlxsw: Cleanups in router code

This patchset moves some router-related code from spectrum.c to
spectrum_router.c where it should be. It also simplifies handlers of
netevent notifications.

- Patch #1 caches router pointer in a dedicated variable. This obviates the
  need to access the same as mlxsw_sp->router, making lines shorter, and
  permitting a future patch to add code that fits within 80 character
  limit.

- Patch #2 moves IP / IPv6 validation notifier blocks from spectrum.c
  to spectrum_router, where the handlers are anyway.

- In patch #3, pass router pointer to scheduler of deferred work directly,
  instead of having it deduce it on its own.

- This makes the router pointer available in the handler function
  mlxsw_sp_router_netevent_event(), so in patch #4, use it directly,
  instead of finding it through mlxsw_sp_port.

- In patch #5, extend mlxsw_sp_router_schedule_work() so that the
  NETEVENT_NEIGH_UPDATE handler can use it directly instead of inlining
  equivalent code.

- In patches #6 and #7, add helpers for two common operations involving
  a backing netdev of a RIF. This makes it unnecessary for the function
  mlxsw_sp_rif_dev() to be visible outside of the router module, so in
  patch #8, hide it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the external users of mlxsw_sp_rif_dev() have been converted in
the preceding patches, make the function static.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a number of places, a netdevice underlying a RIF is obtained only to
compare it to another pointer. In order to clean up the interface between
the router and the other modules, add a new helper to specifically answer
this question, and convert the relevant uses to this new interface.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a number of places, a netdevice underlying a RIF is obtained only to
check if it a NULL pointer. In order to clean up the interface between the
router and the other modules, add a new helper to specifically answer this
question, and convert the relevant uses to this new interface.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the struct mlxsw_sp_netevent_work.n field initialization is moved
here, the body of code that handles NETEVENT_NEIGH_UPDATE is almost
identical to the one in the helper function. Therefore defer to the helper
instead of inlining the equivalent.

Note that previously, the code took and put a reference of the netdevice.
The new code defers to mlxsw_sp_dev_lower_is_port() to obviate the need for
taking the reference.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code handles NETEVENT_DELAY_PROBE_TIME_UPDATE, which is invoked every
time the delay_probe_time changes. mlxsw router currently only maintains
one timer, so the last delay_probe_time set wins.

Currently, mlxsw uses mlxsw_sp_port_lower_dev_hold() to find a reference to
the router. This is no longer necessary. But as a side effect, this makes
sure that only updates to "interesting netdevices" (ones that have a
physical netdevice lower) are projected.

Retain that side effect by calling mlxsw_sp_port_dev_lower_find_rcu() and
punting if there is none. Then just proceed using the router pointer that's
already at hand in the helper.

Note that previously, the code took and put a reference of the netdevice.
Because the mlxsw_sp pointer is now obtained from the notifier block, the
port pointer (non-) NULL-ness is all that's relevant, and the reference
does not need to be taken anymore.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of passing a notifier block and deducing the router pointer from
that in the helper, do that in the caller, and pass the result. In the
following patches, the pointer will also be made useful in the caller.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>