Pull mute-LED helper fixes from Jaroslav.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It may be possible that the string pointer does not move
when parsing. Add a code which detects this state and
simply break the parser loop in this case.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180725.663623-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

As static analysis reported, the prev_lops2 should contain
the previous lops2 pointer in snd_ctl_disconnect_layer().

Link: https://lore.kernel.org/alsa-devel/96e9bd5c-c8db-0db8-b393-fbf4a047dc80@canonical.com/
Fixes: 3f0638a0 ("ALSA: control - add layer registration routines")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180702.663489-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led            24576  0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
   automatically activated
   / it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
        SNDRV_CTL_ELEM_ACCESS_SPK_LED or
        SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:

/sys/devices/virtual/sound/ctl-led/mic
   + card0
   |  + attach
   |  + detach
   |  ...
   + card1
      + attach
      ...

Operations:

  attach and detach
    - amixer style ID is accepted and easy strings for numid and
      simple names
  reset
    - reset all associated kcontrol entries
  list
    - list associated kcontrol entries (numid values only)

Additional symlinks:

/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
  /sys/class/sound/card0

/sys/class/sound/card0/controlC0/led-mic ->
  /sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).

  speaker/
    +-- mode
    +-- brightness
  mic/
    +-- mode
    +-- brightness

Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:

- follow mute
- follow moute (inverted to follow mute)
- off
- on

Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.

Remove the custom implementation from the HDA driver.

Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.

Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).

The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.

This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

modification in commit 2a3f7221 ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.

Fixes: 2a3f7221 ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
   records.

 - Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
   kptr_restrict.

 - Validate raw event with sysfs exported format bits.

 - Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.

 - Change to use bash for daemon test on Debian, where the default is
   dash and thus fails for use of bashisms in this test.

 - Fix memory leak in vDSO found using ASAN.

 - Remove now useless (due to the fact that BPF now supports static
   vars) failing sub test "BPF relocation checker".

 - Fix auxtrace queue conflict.

 - Sync linux/kvm.h with the kernel sources.

* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Change to use bash for daemon test
  perf record: Fix memory leak in vDSO found using ASAN
  perf test: Remove now useless failing sub test "BPF relocation checker"
  perf daemon: Return from kill functions
  perf daemon: Force waipid for all session on SIGCHLD delivery
  perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
  perf pmu: Validate raw event with sysfs exported format bits
  perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf synthetic-events: Fix uninitialized 'kernel_thread' variable
  perf auxtrace: Fix auxtrace queue conflict

Pull auxdisplay fix from Miguel Ojeda:
 "Remove in_interrupt() usage (Sebastian Andrzej Siewior)"

* tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux:
  auxdisplay: Remove in_interrupt() usage.

Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - Fix build failure on Ubuntu with new GCC packages that turn
     on -fcf-protection

   - Fix SME memory encryption PTE encoding bug - AFAICT the code
     worked on 4K page sizes (level 1) but had the wrong shift at
     higher page level orders (level 2 and higher)"

* tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Turn off -fcf-protection for realmode targets
  x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()

Pull locking fix from Ingo Molnar:
 "Fix the non-debug mutex_lock_io_nested() method to map to
  mutex_lock_io() instead of mutex_lock().

  Right now nothing uses this API explicitly, but this is an
  accident waiting to happen"

* tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Fix non debug version of mutex_lock_io_nested()

Pull cifs fixes from Steve French:
 "Five cifs/smb3 fixes, two for stable.

  Includes an important fix for encryption and an ACL fix, as well as a
  fix for possible reflink data corruption"

* tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix cached file size problems in duplicate extents (reflink)
  cifs: Silently ignore unknown oplock break handle
  cifs: revalidate mapping when we open files for SMB1 POSIX
  cifs: Fix chmod with modefromsid when an older ACE already exists.
  cifs: Adjust key sizes and key generation routines for AES256 encryption

Pull io_uring fixes from Jens Axboe:

 - Use thread info versions of flag testing, as discussed last week.

 - The series enabling PF_IO_WORKER to just take signals, instead of
   needing to special case that they do not in a bunch of places. Ends
   up being pretty trivial to do, and then we can revert all the special
   casing we're currently doing.

 - Kill dead pointer assignment

 - Fix hashed part of async work queue trace

 - Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS

 - Fix a link completion ordering regression in this merge window

 - Cancellation fixes

* tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
  io_uring: remove unsued assignment to pointer io
  io_uring: don't cancel extra on files match
  io_uring: don't cancel-track common timeouts
  io_uring: do post-completion chore on t-out cancel
  io_uring: fix timeout cancel return code
  Revert "signal: don't allow STOP on PF_IO_WORKER threads"
  Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"
  Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals"
  Revert "signal: don't allow sending any signals to PF_IO_WORKER threads"
  kernel: stop masking signals in create_io_thread()
  io_uring: handle signals for IO threads like a normal thread
  kernel: don't call do_exit() for PF_IO_WORKER threads
  io_uring: maintain CQE order of a failed link
  io-wq: fix race around pending work on teardown
  io_uring: do ctx sqd ejection in a clear context
  io_uring: fix provide_buffers sign extension
  io_uring: don't skip file_end_write() on reissue
  io_uring: correct io_queue_async_work() traces
  io_uring: don't use {test,clear}_tsk_thread_flag() for current

Pull block fixes from Jens Axboe:

 - Fix regression from this merge window with the xarray partition
   change, which allowed partition counts that overflow the u8 that
   holds the partition number (Ming)

 - Fix zone append warning (Johannes)

 - Segmentation count fix for multipage bvecs (David)

 - Partition scan fix (Chris)

* tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
  block: don't create too many partitions
  block: support zone append bvecs
  block: recalculate segment count for multi-segment discards correctly
  block: clear GD_NEED_PART_SCAN later in bdev_disk_changed

Pull SCSI fixes from James Bottomley:
 "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target,
  ibmvscsi).

  The most serious are the target pscsi oom and the qla2xxx revert which
  can otherwise cause a use after free"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: pscsi: Clean up after failure in pscsi_map_sg()
  scsi: target: pscsi: Avoid OOM in pscsi_map_sg()
  scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()
  scsi: qedi: Fix error return code of qedi_alloc_global_queues()
  scsi: Revert "qla2xxx: Make sure that aborted commands are freed"
  scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware
  scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()

There is an assignment to io that is never read after the assignment,
the assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but
keep behaviour prior to dd59a3d5 ("io_uring: reliably cancel linked
timeouts").
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/104441ef5d97e3932113d44501fda0df88656b83.1616696997.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

When we cancel a timeout we should emit a sensible return code, like
-ECANCELED but not 0, otherwise it may trick users.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 4db4b1a0.

The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 15b2219f.

Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 6fb8f43c.

The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 5be28c8f.

IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.

With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit a33df75c ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped.  Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.

CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.

Found testing xfstest 495 with modefromsid mount option

Fixes: f5065508 ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM verity target's optional argument processing.

 - Fix DM core's zoned model and zone sectors checks.

 - Fix spurious "detected capacity change" pr_info() when creating new
   DM device.

 - Fix DM ioctl out of bounds array access in handling of
   DM_LIST_DEVICES_CMD when no devices exist.

* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm ioctl: fix out of bounds array access when no devices
  dm: don't report "detected capacity change" on device creation
  dm table: Fix zoned model check and zone sectors check
  dm verity: fix DM_VERITY_OPTS_MAX value

If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.

Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull ACPI fixes from Rafael Wysocki:
 "These fix a memory management regression in ACPICA, repair an ACPI
  blacklist entry damaged inadvertently during the 5.11 cycle and fix
  the bookkeeping of devices with the same primary device ID in the ACPI
  core.

  Specifics:

   - Make ACPICA use the same object cache consistently when allocating
     and freeing objects (Vegard Nossum)

   - Add a callback pointer removed inadvertently during the 5.11 cycle
     to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
     Chiu)

   - Make the ACPI device enumeration core use IDA for creating names of
     ACPI device objects with the same primary device ID to avoid using
     duplicate device object names in some cases (Andy Shevchenko)"

* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Always create namespace nodes using acpi_ns_create_node()
  ACPI: scan: Use unique number for instance_no
  ACPI: video: Add missing callback back for Sony VPCEH3U1E