- 05 Sep, 2019 40 commits
-
-
Lorenzo Bianconi authored
Introduce channel survey support for mt76x2u and mt76x0u drivers Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Enable multi-interface support for mt76x02u driver. For the moment allow max two concurrent interfaces in order to preserve enough room for ps traffic since we are using beacon slots for it. I have successfully tested the following configuration: - AP + STA - AP0 + AP1 Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Do not copy beacon skb in mt76x02_mac_set_beacon_enable for usb devices since it will be done in mt76x02_update_beacon_iter. Moreover squash mt76x02_mac_set_beacon_enable and __mt76x02_mac_set_beacon_enable since the latter is run just by mt76x02_mac_set_beacon_enable Signed-off-by:
-
Lorenzo Bianconi authored
Improve code readability introducing mt76x02_pre_tbtt_enable and mt76x02_beacon_enable utility macros Signed-off-by:
-
Lorenzo Bianconi authored
Introduce Smart Carrier Sense support in order to tune device sensitivity according to RTS error rate and False CCA reported by the radio Tested-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
As already done for mt7603 driver, move mt76.mutex lock inside mt7615_set_channel since we need to grab mt76.mutex in mt7615_mac_work. This is a preliminary patch to add Smart Carrier Sense (SCS) support Signed-off-by:
-
Ryder Lee authored
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by:
-
Ryder Lee authored
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by:
-
Ryder Lee authored
This fixes the following checkpatch warnings: WARNING: Improper SPDX comment style Fix blank lines. Signed-off-by:
-
Ryder Lee authored
This fixes the following checkpatch warnings: WARNING: Improper SPDX comment style CHECK: No space is necessary after a cast Signed-off-by:
-
Ryder Lee authored
Update the help text to fix a checkpatch warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by:
-
Ryder Lee authored
Add default values of cw_min/max and use fls() for configuration. Signed-off-by:
-
Ryder Lee authored
Hardware supports 4 sets of WMM that should be put to good use. And fix incorrect queue mapping in mt7615_conf_tx(). Signed-off-by:
-
Lorenzo Bianconi authored
Convert MT7603_WATCHDOG_TIME in jiffies rescheduling watchdog delayed work Fixes: c8846e10 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by:
-
Lorenzo Bianconi authored
Express watchdog timeout in jiffies since it is used directly in ieee80211_queue_delayed_work Fixes: 04b8e659 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by:
-
Lorenzo Bianconi authored
Add mt76_mmio_read_copy routine and the related function pointer in mt76_bus_ops data structure. mt76_mmio_read_copy will be used to add BIP_CMAC_128 cipher hw support to mt7615 driver Signed-off-by:
-
Lorenzo Bianconi authored
Introduce set_key_cmd and mt76_wcid pointer to mt7615_mac_wtbl_set_key signature and do not set key to NULL if cmd is DISABLE_KEY. This is a preliminary patch to add BIP_CMAC_128 hw support to mt7615 driver Signed-off-by:
-
Lorenzo Bianconi authored
Get rid of wtbl_sec_key definition since it is no longer used Signed-off-by:
-
Lorenzo Bianconi authored
Add mt7615_mac_wtbl_set_key routine to configure wtbl key parameter directly from host cpu. This is a preliminary patch to add BIP_CMAC_128 hw support. Moreover add static qualifier to mt7615_mac_get_key_info routine Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mac_wtbl_addr rouinte to compute sta wtbl address. This is a preliminary patch to update wtbl key directly from host processor Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to update wtbl key directly from host processor Signed-off-by:
-
Felix Fietkau authored
- initialize CCA signal source - initialize clock for band 1 (7615D) - initialize BAR rate Reviewed-by:
-
Lorenzo Bianconi authored
Introduce support to TP-Link T2UHP https://wikidevi.com/wiki/TP-LINK_Archer_T2UHPTested-by:
Sid Hayn <sidhayn@gmail.com> Signed-off-by:
-
Stanislaw Gruszka authored
There is no point to use pointer to params->ssn. Signed-off-by:
-
Stanislaw Gruszka authored
There is no point to use pointer to params->ssn. Signed-off-by:
-
Stanislaw Gruszka authored
There is no point to use pointer to params->ssn. Signed-off-by:
-
Stanislaw Gruszka authored
Compiler give us guarantees on variables alignment, so use an variable as buffer when read/write registers and remove unneeded {put,get}_unaligned. Signed-off-by: -
Stanislaw Gruszka authored
In contrast to mt76_wr() which we use to program registers, on mt76_wr_copy() we should not change endian of the data. Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Signed-off-by:
-
Felix Fietkau authored
Only decrement the rate index on duplicate rates if it is not already 0 Signed-off-by: -
Felix Fietkau authored
Only decrement the rate index on duplicate rates if it is not already 0 Signed-off-by: -
Felix Fietkau authored
Bufferable management frames need to be put in the data queue, otherwise they will not be buffered when the receiver is asleep. Signed-off-by: -
Felix Fietkau authored
The hardware expects MT_TX_RATE_NSS to be filled with the number of space/time streams. For non-STBC rates, this is equal to nss. For 1-stream STBC, this needs to be set to 2. This is relevant for VHT rates only, on HT, the value is derived from MCS internally. Signed-off-by: -
Lorenzo Bianconi authored
Fix typo setting urb->transfer_buffer_length in mt76u_fill_rx_sg Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Fixes: f8f527b1 ("mt76: usb: use EP max packet aligned buffer sizes for rx") Signed-off-by:
-
Felix Fietkau authored
- Store the previous and current rate set in the driver + the TSF value at the time of the switch. - Use the tx status TSF value to determine which rate set needs to be used as reference. - Report only short or long GI rates for a single status event, not a mix. - The hardware reports the last used rate index. Use it along with the retry count to figure out what rate was used for the first attempt. - Use the same retry count value for all rate slots to make this calculation work. - Derive the probe rate from the current rateset instead of the skb cb - Do not wait for a status report for the probe frame before removing the probe rate from the rate table. Do it immediately after it was referenced in a tx status report. - Use the first half of the first rate retry budget for the probe rate in order to avoid using too many retries on that rate - Switch from lower rates to higher rates more conservatively - enable hardware rate up/down selection Reviewed-by:
-
Felix Fietkau authored
These values must be initialized to zero, otherwise the hardware could reuse previous values, especially the rate index Reviewed-by:
-
Felix Fietkau authored
It bypasses the MCU, so it does not belong in mcu.c Also make mt7615_mac_tx_rate_val static Reviewed-by:
-
Felix Fietkau authored
Improves performance by switching away from bad rates faster Signed-off-by: -
Lorenzo Bianconi authored
Add mt7615_mcu_send_ram_firmware routine since mt7615_load_ram runs the same code to send ram firmware to cr4 and n9 mcus. Moreover rename gen_dl_mode in mt7615_mcu_gen_dl_mode. This patch does not introduce any behaviour change, it is just code refactor. Signed-off-by:
-
Lorenzo Bianconi authored
Release patch semaphore even if request_firmware fails in mt7615_load_patch Signed-off-by:
-
Lorenzo Bianconi authored
Fix following warning falling back to sw encryption for unsupported ciphers WARNING: CPU: 2 PID: 1495 at backports-4.19.32-1/net/mac80211/key.c:1023 mt76_wcid_key_setup+0x68/0xbc [mt76] CPU: 2 PID: 1495 Comm: hostapd Not tainted 4.14.131 #0 Stack : 00000000 8f0f8bc0 00000000 8007ccec 805f0000 8058ec18 00000000 00000000 80559788 8dca79bc 8fefb10c 805c89c7 805545c8 00000001 8dca7960 53261662 00000000 00000000 80640000 00004668 00000000 000000e9 00000007 00000000 00000000 805d0000 00072537 00000000 80000000 00000000 805f0000 8f1e70d0 8e8fa098 000003ff 805c0000 8f0f8bc0 00000001 802d4340 00000008 80630008 [<800108d0>] show_stack+0x58/0x100 [<8049214c>] dump_stack+0x9c/0xe0 [<80033998>] __warn+0xe0/0x138 [<80033a80>] warn_slowpath_null+0x1c/0x2c [<8e8fa098>] mt76_wcid_key_setup+0x68/0xbc [mt76] [<8e889930>] mt7615_eeprom_init+0x7c0/0xe14 [mt7615e] Suggested-by:
Sebastian Gottschall <s.gottschall@newmedia-net.de> Signed-off-by:
-
