wasn't updated and one place in the sigreturn path where
	the fph-owner wasn't set.

  (show_min_state): Fix typo r11 -> r12.

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5

Here are two fixes for the ia32-compatibility mode handling
for the new semtimedop() system call for the ia64 architecture.

The first problem was that treatment of user-mode calls to semtimedop()
with a NULL 4th (struct timespec *) parameter was inconsistent with the
behavior of the same executable on i386 and also with a natively compiled
ia64 binary.  A NULL 4th arg to semtimedop() should result in no timeout
being used (like a straight semop() call) rather than in an EFAULT error.

The second problem was that a legitimate semtimedop() with a timeout was
also resulting in an EFAULT because the fetch of the internal timespec
strucure by sys_semtimedop() from semtimedop32()'s kernel stack was
treated as an invalid user-data reference.  This requires temporarily
switching the addressing limit with set_fs(), further requiring that
appropriate parameter checking by performed prior to the switch.

The const qualifier was removed from the (struct compat_timespec *) arg
to semtimedop32() so that the call to get_compat_timespec() wouldn't
generate a compilation warning.

This is to

  - handle _CRS with multiple vendor-specific resources
  - use acpi_walk_resources() instead of doing it by hand
  - make lookup of vendor resource by GUID generic
  - cleanup now-unused helper functions

(This depends on the previous IO port space patches, because
they removed the last of acpi_get_addr_space()).

My hope is that acpi_vendor_resource_match() and
acpi_find_vendor_resource() can someday move into ACPI,
but that probably depends on getting the idea of labelling
vendor resources with a GUID into the spec.  HP does this
and I think is working on putting it in the spec.

This is a trivial patch that makes sba_iommu recognize a new IOC.
Only change is that it will print

    IOC: sx1000 0.1 HPA 0xf8120002000 IOVA space 1024Mb at 0x80000000

instead of

    IOC: Unknown (103c:127c) 0.1 HPA 0xf8120002000 IOVA space 1024Mb
at 0x80000000

trivial (whitespace, copyright, and move pcibios_fixup_device_resources
closer to related code)

add support for /proc/iomem and /proc/ioports

enhance pcibios_scan_root to get multiple mem & io windows from ACPI _CRS,
and fixup all the resources

This has been in my 2.4 BK tree for a while, but I should have
posted it in case there's feedback from other people working
on large machines.  So here it is, in four parts:

  1  enhance __ia64_mk_io_addr(port)
  2  enhance pcibios_scan_root to get multiple mem & io windows
      from ACPI _CRS, and fixup all the resources
  3  add support for /proc/iomem and /proc/ioports
  4  trivial (whitespace, copyright, and move pcibios_fixup_device_resources
       closer to related code)

The current scheme is that IO ports are 64 bits, with the low 24
bits being the port number within an IO port space, and the upper
bits identifying the space.  There is currently a limit of 16
spaces.

Here's some cleanups/fixes/changes for interrupts on 2.5.67 + ia64.
Specifically:

  - Cleanup some ugliness with polarity/trigger setup.

  - Add iosapic_enable_intr() to set_rte on an interupt when the
    device is enabled.  IMHO, we really only want to unmask RTEs
    for PRTs we might actually use.  This moves the interrupt
    distribution here too.

  - When changing a vector from edge to level, call register_intr()
    to do it so all the data structures get set correctly.  If we
    have to guess how to setup an interupt and get it wrong, this
    should close some holes in changing it back to the correct type.

  - Register the HCDP interrupt in 8250_hcdp - this is where we have
    to guess the polarity/trigger.  The real handler will get fixed
    up via PCI setup or ACPI namespace serial support, this gets it
    associated w/ the port at setup.  This should allow interrupts
    to work when using builtin UARTs as console on HP Itanium2 boxes.

This patch fixes the issue of some CPUs not showing timer interrupts
going off.  Seems during the process of sync'ing the itc, we jumped over
the next timer value.  This patch is against 2.5.67 + ia64.  I haven't
seen the problem on 2.4, but a quick looks seems like it's potentially
an issue there too.

Please apply the following patch on top of 2.5.6x. This patch does the
following:

- repair broken system-wide overflow notification
- repair broken per-process notification
- fix a problem in the resrved bitmask for opcode 
  matcher8,9 for McKinley as reported by UIUC.
- forcing of bit2 for pmc8/pmc9 now part of reserved bitmask
- add the unsecure option to perfmon
- update to perfmon 1.4 (similar to 2.4)

	with a special convention.  Various minor fixes for gcc-pre3.4.

into home.transmeta.com:/home/torvalds/v2.5/linux

into samba.org:/scratch/anton/linux-2.5_ppc64drivers

into samba.org:/scratch/anton/linux-2.5_ppc64

into samba.org:/scratch/anton/tmp3

- Remove some 2.4 compatibility macros
- Fix userspace pointer misuse in video1394 ioctl. Caught by the
  Stanford Checker. Gotta love the automated systems.
- Move our hotplug stuff around, to make the transition to putting our
  module dev table in mod_devicetable.h.
- Fix ohci1394 for possible crash with async stream packets. Cleaned up
  some debug messages.

This fixes two bugs introduced by some 2.5 changes:

- O_NDELAY handling typo in floppy_open()

- handling of failed transfers in floppy_end_request()
  (do equivalent of what 2.4 does)

Without first fix I was getting "floppy0: disk absent or changed during
operation" infinite loop on opening and without second fix, infinite loop
on error retry.

Now floppy driver seems to be (somehow) working :-).

This file was _the_ header for block-device related stuff in earlier
Linux versions, but nowdays there's just a few prototypes left that
really belong into blkdev.h or genhd.h (and in one case elevator.h).

This patch moves them over and removes everything but including
blkdev.h from blk.h  Note that blkdev.h gets all the headers that
were included in blk.h inmplicitly too.  Now we can start removing
all references to it an maybe kill it off before 2.6.  *sniff*

This adds ieee1394 for module table registration.

This fixes the compat_ioctl interface for the case where a NULL handler
is registered. This should produce a "compatible" as opposed to
"translated" interface for the specified ioctl. The patch was sent to
linux-kernel and no one complained (atleast with this second rev).

Currently __bdevname walks the obsolete list of block majors to
find a name for the given dev_t and falls back to unknown-block(%u,%u)
if that's not possible.  Replace this with an attempted get_gendisk() +
disk_name.  This means __bdevname can't be called from irq context
anymore, but as all old irq context callers are using bdevname() now
that fine (and I've added a big comment).

 - both rpciod_up and rpciod_down do a gratious inc/dec of the
   use count - but we can't ever be inside those function unless
   it's called from an other module -> totally useless
 - rpciod() (the kernel thread) also bumps the refcount when starting
   and decrements it when exiting.  but as a different module must
   initiate this using rpciod_up/rpciod_down this is again not needed.
   (except when a module does rpciod_up without a matching rpciod_down -
   but that a big bug anyway and we don't need to partially handle that
   using module refcounts).

into home.transmeta.com:/home/torvalds/v2.5/linux