1. 26 Jun, 2017 6 commits
  2. 25 Jun, 2017 34 commits
    • Max Filippov's avatar
      net: ethoc: enable NAPI before poll may be scheduled · 246fa510
      Max Filippov authored
      [ Upstream commit d220b942 ]
      
      ethoc_reset enables device interrupts, ethoc_interrupt may schedule a
      NAPI poll before NAPI is enabled in the ethoc_open, which results in
      device being unable to send or receive anything until it's closed and
      reopened. In case the device is flooded with ingress packets it may be
      unable to recover at all.
      Move napi_enable above ethoc_reset in the ethoc_open to fix that.
      
      Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.")
      Signed-off-by: default avatarMax Filippov <jcmvbkbc@gmail.com>
      Reviewed-by: default avatarTobias Klauser <tklauser@distanz.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      246fa510
    • Eric Dumazet's avatar
      net: ping: do not abuse udp_poll() · 169a7e24
      Eric Dumazet authored
      [ Upstream commit 77d4b1d3 ]
      
      Alexander reported various KASAN messages triggered in recent kernels
      
      The problem is that ping sockets should not use udp_poll() in the first
      place, and recent changes in UDP stack finally exposed this old bug.
      
      Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
      Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarSasha Levin <alexander.levin@verizon.com>
      Cc: Solar Designer <solar@openwall.com>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Cc: Lorenzo Colitti <lorenzo@google.com>
      Acked-By: default avatarLorenzo Colitti <lorenzo@google.com>
      Tested-By: default avatarLorenzo Colitti <lorenzo@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      169a7e24
    • David S. Miller's avatar
      ipv6: Fix leak in ipv6_gso_segment(). · 59dc08f8
      David S. Miller authored
      [ Upstream commit e3e86b51 ]
      
      If ip6_find_1stfragopt() fails and we return an error we have to free
      up 'segs' because nobody else is going to.
      
      Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options")
      Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      59dc08f8
    • Yuchung Cheng's avatar
      tcp: disallow cwnd undo when switching congestion control · f257e5d3
      Yuchung Cheng authored
      [ Upstream commit 44abafc4 ]
      
      When the sender switches its congestion control during loss
      recovery, if the recovery is spurious then it may incorrectly
      revert cwnd and ssthresh to the older values set by a previous
      congestion control. Consider a congestion control (like BBR)
      that does not use ssthresh and keeps it infinite: the connection
      may incorrectly revert cwnd to an infinite value when switching
      from BBR to another congestion control.
      
      This patch fixes it by disallowing such cwnd undo operation
      upon switching congestion control.  Note that undo_marker
      is not reset s.t. the packets that were incorrectly marked
      lost would be corrected. We only avoid undoing the cwnd in
      tcp_undo_cwnd_reduction().
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      f257e5d3
    • Ganesh Goudar's avatar
      cxgb4: avoid enabling napi twice to the same queue · fa95ca65
      Ganesh Goudar authored
      [ Upstream commit e7519f99 ]
      
      Take uld mutex to avoid race between cxgb_up() and
      cxgb4_register_uld() to enable napi for the same uld
      queue.
      Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      fa95ca65
    • Ben Hutchings's avatar
      ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt() · cd276bb4
      Ben Hutchings authored
      [ Upstream commit 6e80ac5c ]
      
      xfrm6_find_1stfragopt() may now return an error code and we must
      not treat it as a length.
      
      Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options")
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Acked-by: default avatarCraig Gallek <kraig@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      cd276bb4
    • Mintz, Yuval's avatar
      bnx2x: Fix Multi-Cos · e616f6da
      Mintz, Yuval authored
      [ Upstream commit 3968d389 ]
      
      Apparently multi-cos isn't working for bnx2x quite some time -
      driver implements ndo_select_queue() to allow queue-selection
      for FCoE, but the regular L2 flow would cause it to modulo the
      fallback's result by the number of queues.
      The fallback would return a queue matching the needed tc
      [via __skb_tx_hash()], but since the modulo is by the number of TSS
      queues where number of TCs is not accounted, transmission would always
      be done by a queue configured into using TC0.
      
      Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash")
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e616f6da
    • Eric Sandeen's avatar
      xfs: fix unaligned access in xfs_btree_visit_blocks · d600ccd7
      Eric Sandeen authored
      [ Upstream commit a4d768e7 ]
      
      This structure copy was throwing unaligned access warnings on sparc64:
      
      Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs]
      
      xfs_btree_copy_ptrs does a memcpy, which avoids it.
      Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      d600ccd7
    • Zorro Lang's avatar
      xfs: bad assertion for delalloc an extent that start at i_size · 20d07bb1
      Zorro Lang authored
      [ Upstream commit 892d2a5f ]
      
      By run fsstress long enough time enough in RHEL-7, I find an
      assertion failure (harder to reproduce on linux-4.11, but problem
      is still there):
      
        XFS: Assertion failed: (iflags & BMV_IF_DELALLOC) != 0, file: fs/xfs/xfs_bmap_util.c
      
      The assertion is in xfs_getbmap() funciton:
      
        if (map[i].br_startblock == DELAYSTARTBLOCK &&
      -->   map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
                ASSERT((iflags & BMV_IF_DELALLOC) != 0);
      
      When map[i].br_startoff == XFS_B_TO_FSB(mp, XFS_ISIZE(ip)), the
      startoff is just at EOF. But we only need to make sure delalloc
      extents that are within EOF, not include EOF.
      Signed-off-by: default avatarZorro Lang <zlang@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      20d07bb1
    • Brian Foster's avatar
      xfs: fix indlen accounting error on partial delalloc conversion · 45ed7e2f
      Brian Foster authored
      [ Upstream commit 0daaecac ]
      
      The delalloc -> real block conversion path uses an incorrect
      calculation in the case where the middle part of a delalloc extent
      is being converted. This is documented as a rare situation because
      XFS generally attempts to maximize contiguity by converting as much
      of a delalloc extent as possible.
      
      If this situation does occur, the indlen reservation for the two new
      delalloc extents left behind by the conversion of the middle range
      is calculated and compared with the original reservation. If more
      blocks are required, the delta is allocated from the global block
      pool. This delta value can be characterized as the difference
      between the new total requirement (temp + temp2) and the currently
      available reservation minus those blocks that have already been
      allocated (startblockval(PREV.br_startblock) - allocated).
      
      The problem is that the current code does not account for previously
      allocated blocks correctly. It subtracts the current allocation
      count from the (new - old) delta rather than the old indlen
      reservation. This means that more indlen blocks than have been
      allocated end up stashed in the remaining extents and free space
      accounting is broken as a result.
      
      Fix up the calculation to subtract the allocated block count from
      the original extent indlen and thus correctly allocate the
      reservation delta based on the difference between the new total
      requirement and the unused blocks from the original reservation.
      Also remove a bogus assert that contradicts the fact that the new
      indlen reservation can be larger than the original indlen
      reservation.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      45ed7e2f
    • Brian Foster's avatar
      xfs: wait on new inodes during quotaoff dquot release · 1a229fd5
      Brian Foster authored
      [ Upstream commit e20c8a51 ]
      
      The quotaoff operation has a race with inode allocation that results
      in a livelock. An inode allocation that occurs before the quota
      status flags are updated acquires the appropriate dquots for the
      inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode
      into the perag radix tree, sometime later attaches the dquots to the
      inode and finally clears the XFS_INEW flag. Quotaoff expects to
      release the dquots from all inodes in the filesystem via
      xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator,
      which skips inodes in the XFS_INEW state because they are not fully
      constructed. If the scan occurs after dquots have been attached to
      an inode, but before XFS_INEW is cleared, the newly allocated inode
      will continue to hold a reference to the applicable dquots. When
      quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those
      dquot(s) remain elevated and the dqpurge scan spins indefinitely.
      
      To address this problem, update the xfs_qm_dqrele_all_inodes() scan
      to wait on inodes marked on the XFS_INEW state. We wait on the
      inodes explicitly rather than skip and retry to avoid continuous
      retry loops due to a parallel inode allocation workload. Since
      quotaoff updates the quota state flags and uses a synchronous
      transaction before the dqrele scan, and dquots are attached to
      inodes after radix tree insertion iff quota is enabled, one INEW
      waiting pass through the AG guarantees that the scan has processed
      all inodes that could possibly hold dquot references.
      Reported-by: default avatarEryu Guan <eguan@redhat.com>
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      1a229fd5
    • Brian Foster's avatar
      xfs: update ag iterator to support wait on new inodes · b822f035
      Brian Foster authored
      [ Upstream commit ae2c4ac2 ]
      
      The AG inode iterator currently skips new inodes as such inodes are
      inserted into the inode radix tree before they are fully
      constructed. Certain contexts require the ability to wait on the
      construction of new inodes, however. The fs-wide dquot release from
      the quotaoff sequence is an example of this.
      
      Update the AG inode iterator to support the ability to wait on
      inodes flagged with XFS_INEW upon request. Create a new
      xfs_inode_ag_iterator_flags() interface and support a set of
      iteration flags to modify the iteration behavior. When the
      XFS_AGITER_INEW_WAIT flag is set, include XFS_INEW flags in the
      radix tree inode lookup and wait on them before the callback is
      executed.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b822f035
    • Brian Foster's avatar
      xfs: support ability to wait on new inodes · 821afaae
      Brian Foster authored
      [ Upstream commit 756baca2 ]
      
      Inodes that are inserted into the perag tree but still under
      construction are flagged with the XFS_INEW bit. Most contexts either
      skip such inodes when they are encountered or have the ability to
      handle them.
      
      The runtime quotaoff sequence introduces a context that must wait
      for construction of such inodes to correctly ensure that all dquots
      in the fs are released. In anticipation of this, support the ability
      to wait on new inodes. Wake the appropriate bit when XFS_INEW is
      cleared.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      821afaae
    • Brian Foster's avatar
      xfs: fix up quotacheck buffer list error handling · 9b1260c2
      Brian Foster authored
      [ Upstream commit 20e8a063 ]
      
      The quotacheck error handling of the delwri buffer list assumes the
      resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag
      on the buffers that are dequeued. This can lead to assert failures
      on buffer release and possibly other locking problems.
      
      Move this code to a delwri queue cancel helper function to
      encapsulate the logic required to properly release buffers from a
      delwri queue. Update the helper to clear the delwri queue flag and
      call it from quotacheck.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      9b1260c2
    • Brian Foster's avatar
      xfs: prevent multi-fsb dir readahead from reading random blocks · 022e9b0e
      Brian Foster authored
      [ Upstream commit cb52ee33 ]
      
      Directory block readahead uses a complex iteration mechanism to map
      between high-level directory blocks and underlying physical extents.
      This mechanism attempts to traverse the higher-level dir blocks in a
      manner that handles multi-fsb directory blocks and simultaneously
      maintains a reference to the corresponding physical blocks.
      
      This logic doesn't handle certain (discontiguous) physical extent
      layouts correctly with multi-fsb directory blocks. For example,
      consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory
      block size and a directory with the following extent layout:
      
       EXT: FILE-OFFSET      BLOCK-RANGE      AG AG-OFFSET        TOTAL
         0: [0..7]:          88..95            0 (88..95)             8
         1: [8..15]:         80..87            0 (80..87)             8
         2: [16..39]:        168..191          0 (168..191)          24
         3: [40..63]:        5242952..5242975  1 (72..95)            24
      
      Directory block 0 spans physical extents 0 and 1, dirblk 1 lies
      entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because
      extent 2 is larger than the directory block size, the readahead code
      erroneously assumes the block is contiguous and issues a readahead
      based on the physical mapping of the first fsb of the dirblk. This
      results in read verifier failure and a spurious corruption or crc
      failure, depending on the filesystem format.
      
      Further, the subsequent readahead code responsible for walking
      through the physical table doesn't correctly advance the physical
      block reference for dirblk 2. Instead of advancing two physical
      filesystem blocks, the first iteration of the loop advances 1 block
      (correctly), but the subsequent iteration advances 2 more physical
      blocks because the next physical extent (extent 3, above) happens to
      cover more than dirblk 2. At this point, the higher-level directory
      block walking is completely off the rails of the actual physical
      layout of the directory for the respective mapping table.
      
      Update the contiguous dirblock logic to consider the current offset
      in the physical extent to avoid issuing directory readahead to
      unrelated blocks. Also, update the mapping table advancing code to
      consider the current offset within the current dirblock to avoid
      advancing the mapping reference too far beyond the dirblock.
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      022e9b0e
    • Eric Sandeen's avatar
      xfs: handle array index overrun in xfs_dir2_leaf_readbuf() · 641967d1
      Eric Sandeen authored
      [ Upstream commit 023cc840 ]
      
      Carlos had a case where "find" seemed to start spinning
      forever and never return.
      
      This was on a filesystem with non-default multi-fsb (8k)
      directory blocks, and a fragmented directory with extents
      like this:
      
      0:[0,133646,2,0]
      1:[2,195888,1,0]
      2:[3,195890,1,0]
      3:[4,195892,1,0]
      4:[5,195894,1,0]
      5:[6,195896,1,0]
      6:[7,195898,1,0]
      7:[8,195900,1,0]
      8:[9,195902,1,0]
      9:[10,195908,1,0]
      10:[11,195910,1,0]
      11:[12,195912,1,0]
      12:[13,195914,1,0]
      ...
      
      i.e. the first extent is a contiguous 2-fsb dir block, but
      after that it is fragmented into 1 block extents.
      
      At the top of the readdir path, we allocate a mapping array
      which (for this filesystem geometry) can hold 10 extents; see
      the assignment to map_info->map_size.  During readdir, we are
      therefore able to map extents 0 through 9 above into the array
      for readahead purposes.  If we count by 2, we see that the last
      mapped index (9) is the first block of a 2-fsb directory block.
      
      At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill
      more readahead; the outer loop assumes one full dir block is
      processed each loop iteration, and an inner loop that ensures
      that this is so by advancing to the next extent until a full
      directory block is mapped.
      
      The problem is that this inner loop may step past the last
      extent in the mapping array as it tries to reach the end of
      the directory block.  This will read garbage for the extent
      length, and as a result the loop control variable 'j' may
      become corrupted and never fail the loop conditional.
      
      The number of valid mappings we have in our array is stored
      in map->map_valid, so stop this inner loop based on that limit.
      
      There is an ASSERT at the top of the outer loop for this
      same condition, but we never made it out of the inner loop,
      so the ASSERT never fired.
      
      Huge appreciation for Carlos for debugging and isolating
      the problem.
      Debugged-and-analyzed-by: default avatarCarlos Maiolino <cmaiolino@redhat.com>
      Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
      Tested-by: default avatarCarlos Maiolino <cmaiolino@redhat.com>
      Reviewed-by: default avatarCarlos Maiolino <cmaiolino@redhat.com>
      Reviewed-by: default avatarBill O'Donnell <billodo@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      641967d1
    • Darrick J. Wong's avatar
      xfs: fix over-copying of getbmap parameters from userspace · 17d031b4
      Darrick J. Wong authored
      [ Upstream commit be6324c0 ]
      
      In xfs_ioc_getbmap, we should only copy the fields of struct getbmap
      from userspace, or else we end up copying random stack contents into the
      kernel.  struct getbmap is a strict subset of getbmapx, so a partial
      structure copy should work fine.
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      17d031b4
    • Brian Foster's avatar
      xfs: use dedicated log worker wq to avoid deadlock with cil wq · 74d27999
      Brian Foster authored
      [ Upstream commit 696a5620 ]
      
      The log covering background task used to be part of the xfssyncd
      workqueue. That workqueue was removed as of commit 5889608d ("xfs:
      syncd workqueue is no more") and the associated work item scheduled
      to the xfs-log wq. The latter is used for log buffer I/O completion.
      
      Since xfs_log_worker() can invoke a log flush, a deadlock is
      possible between the xfs-log and xfs-cil workqueues. Consider the
      following codepath from xfs_log_worker():
      
      xfs_log_worker()
        xfs_log_force()
          _xfs_log_force()
            xlog_cil_force()
              xlog_cil_force_lsn()
                xlog_cil_push_now()
                  flush_work()
      
      The above is in xfs-log wq context and blocked waiting on the
      completion of an xfs-cil work item. Concurrently, the cil push in
      progress can end up blocked here:
      
      xlog_cil_push_work()
        xlog_cil_push()
          xlog_write()
            xlog_state_get_iclog_space()
              xlog_wait(&log->l_flush_wait, ...)
      
      The above is in xfs-cil context waiting on log buffer I/O
      completion, which executes in xfs-log wq context. In this scenario
      both workqueues are deadlocked waiting on eachother.
      
      Add a new workqueue specifically for the high level log covering and
      ail pushing worker, as was the case prior to commit 5889608d.
      Diagnosed-by: default avatarDavid Jeffery <djeffery@redhat.com>
      Signed-off-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      74d27999
    • Darrick J. Wong's avatar
      xfs: fix kernel memory exposure problems · ddf2f45b
      Darrick J. Wong authored
      [ Upstream commit bf9216f9 ]
      
      Fix a memory exposure problems in inumbers where we allocate an array of
      structures with holes, fail to zero the holes, then blindly copy the
      kernel memory contents (junk and all) into userspace.
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      ddf2f45b
    • Punit Agrawal's avatar
      mm/migrate: fix refcount handling when !hugepage_migration_supported() · 9bf638a0
      Punit Agrawal authored
      [ Upstream commit 30809f55 ]
      
      On failing to migrate a page, soft_offline_huge_page() performs the
      necessary update to the hugepage ref-count.
      
      But when !hugepage_migration_supported() , unmap_and_move_hugepage()
      also decrements the page ref-count for the hugepage.  The combined
      behaviour leaves the ref-count in an inconsistent state.
      
      This leads to soft lockups when running the overcommitted hugepage test
      from mce-tests suite.
      
        Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000
        soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head)
        INFO: rcu_preempt detected stalls on CPUs/tasks:
         Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715
          (detected by 7, t=5254 jiffies, g=963, c=962, q=321)
          thugetlb_overco R  running task        0  2715   2685 0x00000008
          Call trace:
            dump_backtrace+0x0/0x268
            show_stack+0x24/0x30
            sched_show_task+0x134/0x180
            rcu_print_detail_task_stall_rnp+0x54/0x7c
            rcu_check_callbacks+0xa74/0xb08
            update_process_times+0x34/0x60
            tick_sched_handle.isra.7+0x38/0x70
            tick_sched_timer+0x4c/0x98
            __hrtimer_run_queues+0xc0/0x300
            hrtimer_interrupt+0xac/0x228
            arch_timer_handler_phys+0x3c/0x50
            handle_percpu_devid_irq+0x8c/0x290
            generic_handle_irq+0x34/0x50
            __handle_domain_irq+0x68/0xc0
            gic_handle_irq+0x5c/0xb0
      
      Address this by changing the putback_active_hugepage() in
      soft_offline_huge_page() to putback_movable_pages().
      
      This only triggers on systems that enable memory failure handling
      (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration
      (!ARCH_ENABLE_HUGEPAGE_MIGRATION).
      
      I imagine this wasn't triggered as there aren't many systems running
      this configuration.
      
      [akpm@linux-foundation.org: remove dead comment, per Naoya]
      Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by: default avatarManoj Iyer <manoj.iyer@canonical.com>
      Tested-by: default avatarManoj Iyer <manoj.iyer@canonical.com>
      Suggested-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: default avatarPunit Agrawal <punit.agrawal@arm.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Wanpeng Li <wanpeng.li@hotmail.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Mel Gorman <mgorman@techsingularity.net>
      Cc: <stable@vger.kernel.org>	[3.14+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      9bf638a0
    • Alex Deucher's avatar
      drm/radeon/ci: disable mclk switching for high refresh rates (v2) · c7dbf874
      Alex Deucher authored
      [ Upstream commit 58d7e3e4 ]
      
      Even if the vblank period would allow it, it still seems to
      be problematic on some cards.
      
      v2: fix logic inversion (Nils)
      
      bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
      
      Cc: stable@vger.kernel.org
      Acked-by: default avatarChristian König <christian.koenig@amd.com>
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      c7dbf874
    • Richard Narron's avatar
      fs/ufs: Set UFS default maximum bytes per file · 9fcaaa87
      Richard Narron authored
      [ Upstream commit 239e250e ]
      
      This fixes a problem with reading files larger than 2GB from a UFS-2
      file system:
      
          https://bugzilla.kernel.org/show_bug.cgi?id=195721
      
      The incorrect UFS s_maxsize limit became a problem as of commit
      c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
      which started using s_maxbytes to avoid a page index overflow in
      do_generic_file_read().
      
      That caused files to be truncated on UFS-2 file systems because the
      default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.
      
      Here I simply increase the default to a common value used by other file
      systems.
      Signed-off-by: default avatarRichard Narron <comet.berkeley@gmail.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Will B <will.brokenbourgh2877@gmail.com>
      Cc: Theodore Ts'o <tytso@mit.edu>
      Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      9fcaaa87
    • Orlando Arias's avatar
      sparc: Fix -Wstringop-overflow warning · b36188f2
      Orlando Arias authored
      [ Upstream commit deba804c ]
      
      Greetings,
      
      GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows
      in calls to string handling functions [1][2]. Due to the way
      ``empty_zero_page'' is declared in arch/sparc/include/setup.h, this
      causes a warning to trigger at compile time in the function mem_init(),
      which is subsequently converted to an error. The ensuing patch fixes
      this issue and aligns the declaration of empty_zero_page to that of
      other architectures. Thank you.
      
      Cheers,
      Orlando.
      
      [1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html
      [2] https://gcc.gnu.org/gcc-7/changes.htmlSigned-off-by: default avatarOrlando Arias <oarias@knights.ucf.edu>
      
      --------------------------------------------------------------------------------
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b36188f2
    • Davide Caratti's avatar
      sctp: fix ICMP processing if skb is non-linear · 80f68f7d
      Davide Caratti authored
      [ Upstream commit 804ec7eb ]
      
      sometimes ICMP replies to INIT chunks are ignored by the client, even if
      the encapsulated SCTP headers match an open socket. This happens when the
      ICMP packet is carried by a paged skb: use skb_header_pointer() to read
      packet contents beyond the SCTP header, so that chunk header and initiate
      tag are validated correctly.
      
      v2:
      - don't use skb_header_pointer() to read the transport header, since
        icmp_socket_deliver() already puts these 8 bytes in the linear area.
      - change commit message to make specific reference to INIT chunks.
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      80f68f7d
    • Wei Wang's avatar
      tcp: avoid fastopen API to be used on AF_UNSPEC · 01426eb3
      Wei Wang authored
      [ Upstream commit ba615f67 ]
      
      Fastopen API should be used to perform fastopen operations on the TCP
      socket. It does not make sense to use fastopen API to perform disconnect
      by calling it with AF_UNSPEC. The fastopen data path is also prone to
      race conditions and bugs when using with AF_UNSPEC.
      
      One issue reported and analyzed by Vegard Nossum is as follows:
      +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
      Thread A:                            Thread B:
      ------------------------------------------------------------------------
      sendto()
       - tcp_sendmsg()
           - sk_stream_memory_free() = 0
               - goto wait_for_sndbuf
      	     - sk_stream_wait_memory()
      	        - sk_wait_event() // sleep
                |                          sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
      	  |                           - tcp_sendmsg()
      	  |                              - tcp_sendmsg_fastopen()
      	  |                                 - __inet_stream_connect()
      	  |                                    - tcp_disconnect() //because of AF_UNSPEC
      	  |                                       - tcp_transmit_skb()// send RST
      	  |                                    - return 0; // no reconnect!
      	  |                           - sk_stream_wait_connect()
      	  |                                 - sock_error()
      	  |                                    - xchg(&sk->sk_err, 0)
      	  |                                    - return -ECONNRESET
      	- ... // wake up, see sk->sk_err == 0
          - skb_entail() on TCP_CLOSE socket
      
      If the connection is reopened then we will send a brand new SYN packet
      after thread A has already queued a buffer. At this point I think the
      socket internal state (sequence numbers etc.) becomes messed up.
      
      When the new connection is closed, the FIN-ACK is rejected because the
      sequence number is outside the window. The other side tries to
      retransmit,
      but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which
      corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
      +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
      
      Hence, this patch adds a check for AF_UNSPEC in the fastopen data path
      and return EOPNOTSUPP to user if such case happens.
      
      Fixes: cf60af03 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
      Reported-by: default avatarVegard Nossum <vegard.nossum@oracle.com>
      Signed-off-by: default avatarWei Wang <weiwan@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      01426eb3
    • Vlad Yasevich's avatar
      virtio-net: enable TSO/checksum offloads for Q-in-Q vlans · a10f1d6a
      Vlad Yasevich authored
      [ Upstream commit 2836b4f2 ]
      
      Since virtio does not provide it's own ndo_features_check handler,
      TSO, and now checksum offload, are disabled for stacked vlans.
      Re-enable the support and let the host take care of it.  This
      restores/improves Guest-to-Guest performance over Q-in-Q vlans.
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      a10f1d6a
    • Vlad Yasevich's avatar
      be2net: Fix offload features for Q-in-Q packets · a05aec67
      Vlad Yasevich authored
      [ Upstream commit cc6e9de6 ]
      
      At least some of the be2net cards do not seem to be capabled
      of performing checksum offload computions on Q-in-Q packets.
      In these case, the recevied checksum on the remote is invalid
      and TCP syn packets are dropped.
      
      This patch adds a call to check disbled acceleration features
      on Q-in-Q tagged traffic.
      
      CC: Sathya Perla <sathya.perla@broadcom.com>
      CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
      CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
      CC: Somnath Kotur <somnath.kotur@broadcom.com>
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      a05aec67
    • Vlad Yasevich's avatar
      vlan: Fix tcp checksum offloads in Q-in-Q vlans · b7b05a3b
      Vlad Yasevich authored
      [ Upstream commit 35d2f80b ]
      
      It appears that TCP checksum offloading has been broken for
      Q-in-Q vlans.  The behavior was execerbated by the
      series
          commit afb0bc97 ("Merge branch 'stacked_vlan_tso'")
      that that enabled accleleration features on stacked vlans.
      
      However, event without that series, it is possible to trigger
      this issue.  It just requires a lot more specialized configuration.
      
      The root cause is the interaction between how
      netdev_intersect_features() works, the features actually set on
      the vlan devices and HW having the ability to run checksum with
      longer headers.
      
      The issue starts when netdev_interesect_features() replaces
      NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM,
      if the HW advertises IP|IPV6 specific checksums.  This happens
      for tagged and multi-tagged packets.   However, HW that enables
      IP|IPV6 checksum offloading doesn't gurantee that packets with
      arbitrarily long headers can be checksummed.
      
      This patch disables IP|IPV6 checksums on the packet for multi-tagged
      packets.
      
      CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      CC: Michal Kubecek <mkubecek@suse.cz>
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Acked-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b7b05a3b
    • Eric Dumazet's avatar
      ipv6: fix out of bound writes in __ip6_append_data() · d78ddec4
      Eric Dumazet authored
      [ Upstream commit 232cd35d ]
      
      Andrey Konovalov and idaifish@gmail.com reported crashes caused by
      one skb shared_info being overwritten from __ip6_append_data()
      
      Andrey program lead to following state :
      
      copy -4200 datalen 2000 fraglen 2040
      maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200
      
      The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
      fraggap, 0); is overwriting skb->head and skb_shared_info
      
      Since we apparently detect this rare condition too late, move the
      code earlier to even avoid allocating skb and risking crashes.
      
      Once again, many thanks to Andrey and syzkaller team.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Reported-by: <idaifish@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      d78ddec4
    • Bjørn Mork's avatar
      qmi_wwan: add another Lenovo EM74xx device ID · acf388f7
      Bjørn Mork authored
      [ Upstream commit 486181bc ]
      
      In their infinite wisdom, and never ending quest for end user frustration,
      Lenovo has decided to use a new USB device ID for the wwan modules in
      their 2017 laptops.  The actual hardware is still the Sierra Wireless
      EM7455 or EM7430, depending on region.
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      acf388f7
    • David S. Miller's avatar
      ipv6: Check ip6_find_1stfragopt() return value properly. · 7144c12e
      David S. Miller authored
      [ Upstream commit 7dd7eb95 ]
      
      Do not use unsigned variables to see if it returns a negative
      error or not.
      
      Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options")
      Reported-by: default avatarJulia Lawall <julia.lawall@lip6.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      7144c12e
    • Craig Gallek's avatar
      ipv6: Prevent overrun when parsing v6 header options · e7f05ff3
      Craig Gallek authored
      [ Upstream commit 2423496a ]
      
      The KASAN warning repoted below was discovered with a syzkaller
      program.  The reproducer is basically:
        int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP);
        send(s, &one_byte_of_data, 1, MSG_MORE);
        send(s, &more_than_mtu_bytes_data, 2000, 0);
      
      The socket() call sets the nexthdr field of the v6 header to
      NEXTHDR_HOP, the first send call primes the payload with a non zero
      byte of data, and the second send call triggers the fragmentation path.
      
      The fragmentation code tries to parse the header options in order
      to figure out where to insert the fragment option.  Since nexthdr points
      to an invalid option, the calculation of the size of the network header
      can made to be much larger than the linear section of the skb and data
      is read outside of it.
      
      This fix makes ip6_find_1stfrag return an error if it detects
      running out-of-bounds.
      
      [   42.361487] ==================================================================
      [   42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730
      [   42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789
      [   42.366469]
      [   42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41
      [   42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
      [   42.368824] Call Trace:
      [   42.369183]  dump_stack+0xb3/0x10b
      [   42.369664]  print_address_description+0x73/0x290
      [   42.370325]  kasan_report+0x252/0x370
      [   42.370839]  ? ip6_fragment+0x11c8/0x3730
      [   42.371396]  check_memory_region+0x13c/0x1a0
      [   42.371978]  memcpy+0x23/0x50
      [   42.372395]  ip6_fragment+0x11c8/0x3730
      [   42.372920]  ? nf_ct_expect_unregister_notifier+0x110/0x110
      [   42.373681]  ? ip6_copy_metadata+0x7f0/0x7f0
      [   42.374263]  ? ip6_forward+0x2e30/0x2e30
      [   42.374803]  ip6_finish_output+0x584/0x990
      [   42.375350]  ip6_output+0x1b7/0x690
      [   42.375836]  ? ip6_finish_output+0x990/0x990
      [   42.376411]  ? ip6_fragment+0x3730/0x3730
      [   42.376968]  ip6_local_out+0x95/0x160
      [   42.377471]  ip6_send_skb+0xa1/0x330
      [   42.377969]  ip6_push_pending_frames+0xb3/0xe0
      [   42.378589]  rawv6_sendmsg+0x2051/0x2db0
      [   42.379129]  ? rawv6_bind+0x8b0/0x8b0
      [   42.379633]  ? _copy_from_user+0x84/0xe0
      [   42.380193]  ? debug_check_no_locks_freed+0x290/0x290
      [   42.380878]  ? ___sys_sendmsg+0x162/0x930
      [   42.381427]  ? rcu_read_lock_sched_held+0xa3/0x120
      [   42.382074]  ? sock_has_perm+0x1f6/0x290
      [   42.382614]  ? ___sys_sendmsg+0x167/0x930
      [   42.383173]  ? lock_downgrade+0x660/0x660
      [   42.383727]  inet_sendmsg+0x123/0x500
      [   42.384226]  ? inet_sendmsg+0x123/0x500
      [   42.384748]  ? inet_recvmsg+0x540/0x540
      [   42.385263]  sock_sendmsg+0xca/0x110
      [   42.385758]  SYSC_sendto+0x217/0x380
      [   42.386249]  ? SYSC_connect+0x310/0x310
      [   42.386783]  ? __might_fault+0x110/0x1d0
      [   42.387324]  ? lock_downgrade+0x660/0x660
      [   42.387880]  ? __fget_light+0xa1/0x1f0
      [   42.388403]  ? __fdget+0x18/0x20
      [   42.388851]  ? sock_common_setsockopt+0x95/0xd0
      [   42.389472]  ? SyS_setsockopt+0x17f/0x260
      [   42.390021]  ? entry_SYSCALL_64_fastpath+0x5/0xbe
      [   42.390650]  SyS_sendto+0x40/0x50
      [   42.391103]  entry_SYSCALL_64_fastpath+0x1f/0xbe
      [   42.391731] RIP: 0033:0x7fbbb711e383
      [   42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
      [   42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383
      [   42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003
      [   42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018
      [   42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad
      [   42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00
      [   42.397257]
      [   42.397411] Allocated by task 3789:
      [   42.397702]  save_stack_trace+0x16/0x20
      [   42.398005]  save_stack+0x46/0xd0
      [   42.398267]  kasan_kmalloc+0xad/0xe0
      [   42.398548]  kasan_slab_alloc+0x12/0x20
      [   42.398848]  __kmalloc_node_track_caller+0xcb/0x380
      [   42.399224]  __kmalloc_reserve.isra.32+0x41/0xe0
      [   42.399654]  __alloc_skb+0xf8/0x580
      [   42.400003]  sock_wmalloc+0xab/0xf0
      [   42.400346]  __ip6_append_data.isra.41+0x2472/0x33d0
      [   42.400813]  ip6_append_data+0x1a8/0x2f0
      [   42.401122]  rawv6_sendmsg+0x11ee/0x2db0
      [   42.401505]  inet_sendmsg+0x123/0x500
      [   42.401860]  sock_sendmsg+0xca/0x110
      [   42.402209]  ___sys_sendmsg+0x7cb/0x930
      [   42.402582]  __sys_sendmsg+0xd9/0x190
      [   42.402941]  SyS_sendmsg+0x2d/0x50
      [   42.403273]  entry_SYSCALL_64_fastpath+0x1f/0xbe
      [   42.403718]
      [   42.403871] Freed by task 1794:
      [   42.404146]  save_stack_trace+0x16/0x20
      [   42.404515]  save_stack+0x46/0xd0
      [   42.404827]  kasan_slab_free+0x72/0xc0
      [   42.405167]  kfree+0xe8/0x2b0
      [   42.405462]  skb_free_head+0x74/0xb0
      [   42.405806]  skb_release_data+0x30e/0x3a0
      [   42.406198]  skb_release_all+0x4a/0x60
      [   42.406563]  consume_skb+0x113/0x2e0
      [   42.406910]  skb_free_datagram+0x1a/0xe0
      [   42.407288]  netlink_recvmsg+0x60d/0xe40
      [   42.407667]  sock_recvmsg+0xd7/0x110
      [   42.408022]  ___sys_recvmsg+0x25c/0x580
      [   42.408395]  __sys_recvmsg+0xd6/0x190
      [   42.408753]  SyS_recvmsg+0x2d/0x50
      [   42.409086]  entry_SYSCALL_64_fastpath+0x1f/0xbe
      [   42.409513]
      [   42.409665] The buggy address belongs to the object at ffff88000969e780
      [   42.409665]  which belongs to the cache kmalloc-512 of size 512
      [   42.410846] The buggy address is located 24 bytes inside of
      [   42.410846]  512-byte region [ffff88000969e780, ffff88000969e980)
      [   42.411941] The buggy address belongs to the page:
      [   42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
      [   42.413298] flags: 0x100000000008100(slab|head)
      [   42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c
      [   42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000
      [   42.415074] page dumped because: kasan: bad access detected
      [   42.415604]
      [   42.415757] Memory state around the buggy address:
      [   42.416222]  ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [   42.416904]  ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [   42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [   42.418273]                    ^
      [   42.418588]  ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [   42.419273]  ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [   42.419882] ==================================================================
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarCraig Gallek <kraig@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e7f05ff3
    • Soheil Hassas Yeganeh's avatar
      tcp: eliminate negative reordering in tcp_clean_rtx_queue · 3e674773
      Soheil Hassas Yeganeh authored
      [ Upstream commit bafbb9c7 ]
      
      tcp_ack() can call tcp_fragment() which may dededuct the
      value tp->fackets_out when MSS changes. When prior_fackets
      is larger than tp->fackets_out, tcp_clean_rtx_queue() can
      invoke tcp_update_reordering() with negative values. This
      results in absurd tp->reodering values higher than
      sysctl_tcp_max_reordering.
      
      Note that tcp_update_reordering indeeds sets tp->reordering
      to min(sysctl_tcp_max_reordering, metric), but because
      the comparison is signed, a negative metric always wins.
      
      Fixes: c7caf8d3 ("[TCP]: Fix reord detection due to snd_una covered holes")
      Reported-by: default avatarRebecca Isaacs <risaacs@google.com>
      Signed-off-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      3e674773
    • Eric Dumazet's avatar
      sctp: do not inherit ipv6_{mc|ac|fl}_list from parent · e7b4f3d3
      Eric Dumazet authored
      [ Upstream commit fdcee2cb ]
      
      SCTP needs fixes similar to 83eaddab ("ipv6/dccp: do not inherit
      ipv6_mc_list from parent"), otherwise bad things can happen.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e7b4f3d3