Pull pull additional NFS client changes for 3.19 from Anna Schumaker:
  "NFS: Generic client side changes from Chuck

  These patches fixes for iostats and SETCLIENTID in addition to cleaning
  up the nfs4_init_callback() function.

  Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"

* tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
  NFS: Clean up nfs4_init_callback()
  NFS: SETCLIENTID XDR buffer sizes are incorrect
  SUNRPC: serialize iostats updates

This patch adds support for using the NFS v4.2 operation DEALLOCATE to
punch holes in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This patch adds support for using the NFS v4.2 operation ALLOCATE to
preallocate data in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs4_init_callback() is never invoked for NFS versions other than 4.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Use the correct calculation of the maximum size of a clientaddr4
when encoding and decoding SETCLIENTID operations. clientaddr4 is
defined in section 2.2.10 of RFC3530bis-31.

The usage in encode_setclientid_maxsz is missing the 4-byte length
in both strings, but is otherwise correct. decode_setclientid_maxsz
simply asks for a page of receive buffer space, which is
unnecessarily large (more than 4KB).

Note that a SETCLIENTID reply is either clientid+verifier, or
clientaddr4, depending on the returned NFS status. It doesn't
hurt to allocate enough space for both.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Occasionally mountstats reports a negative retransmission rate.
Ensure that two RPCs completing concurrently don't confuse the sums
in the transport's op_metrics array.

Since pNFS filelayout can invoke rpc_count_iostats() on another
transport from xprt_release(), we can't rely on simply holding the
transport_lock in xprt_release(). There's nothing for it but hard
serialization. One spin lock per RPC operation should make this as
painless as it can be.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Define and use nfs_inc_fscache_stats when plus one, which can save to
pass one parameter.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The nfs_put_client() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

It's always set to the same value as CONFIG_TRACEPOINTS, so we can just
use that instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

LOCKD_DEBUG is always the same value as CONFIG_SUNRPC_DEBUG, so we can
just use it instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt
early so that it is safe to call .release in case nfs4_alloc_pages
fails.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Fixes: a47970ff ("NFSv4.1: Hold reference to layout hdr in layoutget")
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Recent work in the pgio layer made it possible for there to be more than one
request per page. This caused a subtle change in commit behavior, because
write.c:nfs_commit_unstable_pages compares the number of *pages* waiting for
writeback against the number of requests on a commit list to choose when to
send a COMMIT in a non-blocking flush.

This is probably hard to hit in normal operation - you have to be using
rsize/wsize < PAGE_SIZE, or pnfs with lots of boundaries that are not page
aligned to have a noticeable change in behavior.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Use the number of pages in the pagecache mapping instead of the
number of pnfs requests which is only slightly related.
Reported-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Add tracepoints inside the main loop on xs_tcp_data_recv that allow
us to keep an eye on what's happening during each phase of it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

...so we can keep track of when calls are sent and replies received.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

...just around svc_send, svc_recv and svc_process for now.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This should make the code easier to maintain in the future.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS4ERR_ACCESS has number 13 and thus is matched and returned
immediately at the beginning of nfs4_map_errors() and there's no point
in checking it later.

Coverity-id: 733891
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

x86 call do_notify_resume on paranoid returns if TIF_UPROBE is set but
not on non-paranoid returns.  I suspect that this is a mistake and that
the code only works because int3 is paranoid.

Setting _TIF_NOTIFY_RESUME in the uprobe code was probably a workaround
for the x86 bug.  With that bug fixed, we can remove _TIF_NOTIFY_RESUME
from the uprobes code.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Chris bisected a NULL pointer deference in task_sched_runtime() to
commit 6e998916 'sched/cputime: Fix clock_nanosleep()/clock_gettime()
inconsistency'.

Chris observed crashes in atop or other /proc walking programs when he
started fork bombs on his machine.  He assumed that this is a new exit
race, but that does not make any sense when looking at that commit.

What's interesting is that, the commit provides update_curr callbacks
for all scheduling classes except stop_task and idle_task.

While nothing can ever hit that via the clock_nanosleep() and
clock_gettime() interfaces, which have been the target of the commit in
question, the author obviously forgot that there are other code paths
which invoke task_sched_runtime()

do_task_stat(()
 thread_group_cputime_adjusted()
   thread_group_cputime()
     task_cputime()
       task_sched_runtime()
        if (task_current(rq, p) && task_on_rq_queued(p)) {
          update_rq_clock(rq);
          up->sched_class->update_curr(rq);
        }

If the stats are read for a stomp machine task, aka 'migration/N' and
that task is current on its cpu, this will happily call the NULL pointer
of stop_task->update_curr.  Ooops.

Chris observation that this happens faster when he runs the fork bomb
makes sense as the fork bomb will kick migration threads more often so
the probability to hit the issue will increase.

Add the missing update_curr callbacks to the scheduler classes stop_task
and idle_task.  While idle tasks cannot be monitored via /proc we have
other means to hit the idle case.

Fixes: 6e998916 'sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency'
Reported-by: Chris Mason <clm@fb.com>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge x86-64 iret fixes from Andy Lutomirski:
 "This addresses the following issues:

   - an unrecoverable double-fault triggerable with modify_ldt.
   - invalid stack usage in espfix64 failed IRET recovery from IST
     context.
   - invalid stack usage in non-espfix64 failed IRET recovery from IST
     context.

  It also makes a good but IMO scary change: non-espfix64 failed IRET
  will now report the correct error.  Hopefully nothing depended on the
  old incorrect behavior, but maybe Wine will get confused in some
  obscure corner case"

* emailed patches from Andy Lutomirski <luto@amacapital.net>:
  x86_64, traps: Rework bad_iret
  x86_64, traps: Stop using IST for #SS
  x86_64, traps: Fix the espfix64 #DF fixup and rewrite it in C

It's possible for iretq to userspace to fail.  This can happen because
of a bad CS, SS, or RIP.

Historically, we've handled it by fixing up an exception from iretq to
land at bad_iret, which pretends that the failed iret frame was really
the hardware part of #GP(0) from userspace.  To make this work, there's
an extra fixup to fudge the gs base into a usable state.

This is suboptimal because it loses the original exception.  It's also
buggy because there's no guarantee that we were on the kernel stack to
begin with.  For example, if the failing iret happened on return from an
NMI, then we'll end up executing general_protection on the NMI stack.
This is bad for several reasons, the most immediate of which is that
general_protection, as a non-paranoid idtentry, will try to deliver
signals and/or schedule from the wrong stack.

This patch throws out bad_iret entirely.  As a replacement, it augments
the existing swapgs fudge into a full-blown iret fixup, mostly written
in C.  It's should be clearer and more correct.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On a 32-bit kernel, this has no effect, since there are no IST stacks.

On a 64-bit kernel, #SS can only happen in user code, on a failed iret
to user space, a canonical violation on access via RSP or RBP, or a
genuine stack segment violation in 32-bit kernel code.  The first two
cases don't need IST, and the latter two cases are unlikely fatal bugs,
and promoting them to double faults would be fine.

This fixes a bug in which the espfix64 code mishandles a stack segment
violation.

This saves 4k of memory per CPU and a tiny bit of code.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's nothing special enough about the espfix64 double fault fixup to
justify writing it in assembly.  Move it to C.

This also fixes a bug: if the double fault came from an IST stack, the
old asm code would return to a partially uninitialized stack frame.

Fixes: 3891a04aSigned-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes this week:

   - A set of clock fixes for shmobile platforms
   - A fix for tegra that moves serial port labels to be per board.
     We're choosing to merge this for 3.18 because the labels will start
     being parsed in 3.19, and without this change serial port numbers
     that used to be stable since the dawn of time will change numbers.
   - A few other DT tweaks for Tegra.
   - A fix for multi_v7_defconfig that makes it stop spewing cpufreq
     errors on Arndale (Exynos)"

* tag 'armsoc-for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller
  ARM: tegra: roth: Fix SD card VDD_IO regulator
  ARM: tegra: Remove eMMC vmmc property for roth/tn7
  ARM: dts: tegra: move serial aliases to per-board
  ARM: tegra: Add serial port labels to Tegra124 DT
  ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
  ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock
  ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree
  ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clock
  ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module
  ARM: shmobile: r8a7790: Fix SD3CKCR address
  ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller

Pull percpu fix from Tejun Heo:
 "This contains one patch to fix a race condition which can lead to
  percpu_ref using a percpu pointer which is corrupted with a set DEAD
  bit.  The bug was introduced while separating out the ATOMIC mode flag
  from the DEAD flag.  The fix is pretty straight forward.

  I just committed the patch to the percpu tree but am sending out the
  pull request early as I'll be on vacation for a week.  The patch
  should be fairly safe and while the latency will be higher I'll be
  checking emails"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-ref: fix DEAD flag contamination of percpu pointer

Pull btrfs deadlock fix from Chris Mason:
 "This has a fix for a long standing deadlock that we've been trying to
  nail down for a while.  It ended up being a bad interaction with the
  fair reader/writer locks and the order btrfs reacquires locks in the
  btree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix lockups from btrfs_clear_path_blocking

While decoupling ATOMIC and DEAD flags, f47ad457 ("percpu_ref:
decouple switching to percpu mode and reinit") updated
__ref_is_percpu() so that it only tests ATOMIC flag to determine
whether the ref is in percpu mode or not; however, while DEAD implies
ATOMIC, the two flags are set separately during percpu_ref_kill() and
if __ref_is_percpu() races percpu_ref_kill(), it may see DEAD w/o
ATOMIC.  Because __ref_is_percpu() returns @ref->percpu_count_ptr
value verbatim as the percpu pointer after testing ATOMIC, the pointer
may now be contaminated with the DEAD flag.

This can be fixed by clearing the flag bits before returning the
pointer which was the fix proposed by Shaohua; however, as DEAD
implies ATOMIC, we can just test for both flags at once and avoid the
explicit masking.

Update __ref_is_percpu() so that it tests that both ATOMIC and DEAD
are clear before returning @ref->percpu_count_ptr as the percpu
pointer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Reviewed-by: Shaohua Li <shli@kernel.org>
Link: http://lkml.kernel.org/r/995deb699f5b873c45d667df4add3b06f73c2c25.1416638887.git.shli@kernel.org
Fixes: f47ad457 ("percpu_ref: decouple switching to percpu mode and reinit")

Pull timer fix from Thomas Gleixner:
 "A single bugfix for an init order problem in the sun4i subarch
  clockevents code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevent: sun4i: Fix race condition in the probe code

Pull vfs fixes from Al Viro:
 "Assorted fixes, most in overlayfs land"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ovl: ovl_dir_fsync() cleanup
  ovl: update MAINTAINERS
  ovl: pass dentry into ovl_dir_read_merged()
  ovl: use lockless_dereference() for upperdentry
  ovl: allow filenames with comma
  ovl: fix race in private xattr checks
  ovl: fix remove/copy-up race
  ovl: rename filesystem type to "overlay"
  isofs: avoid unused function warning
  vfs: fix reference leak in d_prune_aliases()

Pull networking fixes from David Miller:

 1) Fix BUG when decrypting empty packets in mac80211, from Ronald Wahl.

 2) nf_nat_range is not fully initialized and this is copied back to
    userspace, from Daniel Borkmann.

 3) Fix read past end of b uffer in netfilter ipset, also from Dan
    Carpenter.

 4) Signed integer overflow in ipv4 address mask creation helper
    inet_make_mask(), from Vincent BENAYOUN.

 5) VXLAN, be2net, mlx4_en, and qlcnic need ->ndo_gso_check() methods to
    properly describe the device's capabilities, from Joe Stringer.

 6) Fix memory leaks and checksum miscalculations in openvswitch, from
    Pravin B SHelar and Jesse Gross.

 7) FIB rules passes back ambiguous error code for unreachable routes,
    making behavior confusing for userspace.  Fix from Panu Matilainen.

 8) ieee802154fake_probe() doesn't release resources properly on error,
    from Alexey Khoroshilov.

 9) Fix skb_over_panic in add_grhead(), from Daniel Borkmann.

10) Fix access of stale slave pointers in bonding code, from Nikolay
    Aleksandrov.

11) Fix stack info leak in PPP pptp code, from Mathias Krause.

12) Cure locking bug in IPX stack, from Jiri Bohac.

13) Revert SKB fclone memory freeing optimization that is racey and can
    allow accesses to freed up memory, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (71 commits)
  tcp: Restore RFC5961-compliant behavior for SYN packets
  net: Revert "net: avoid one atomic operation in skb_clone()"
  virtio-net: validate features during probe
  cxgb4 : Fix DCB priority groups being returned in wrong order
  ipx: fix locking regression in ipx_sendmsg and ipx_recvmsg
  openvswitch: Don't validate IPv6 label masks.
  pptp: fix stack info leak in pptp_getname()
  brcmfmac: don't include linux/unaligned/access_ok.h
  cxgb4i : Don't block unload/cxgb4 unload when remote closes TCP connection
  ipv6: delete protocol and unregister rtnetlink when cleanup
  net/mlx4_en: Add VXLAN ndo calls to the PF net device ops too
  bonding: fix curr_active_slave/carrier with loadbalance arp monitoring
  mac80211: minstrel_ht: fix a crash in rate sorting
  vxlan: Inline vxlan_gso_check().
  can: m_can: update to support CAN FD features
  can: m_can: fix incorrect error messages
  can: m_can: add missing delay after setting CCCR_INIT bit
  can: m_can: fix not set can_dlc for remote frame
  can: m_can: fix possible sleep in napi poll
  can: m_can: add missing message RAM initialization
  ...

Pull drm fixes from Dave Airlie:
 "Just two radeon and two intel fixes: endian and regression fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: fix endian swapping in vbios fetch for tdp table
  drm/radeon: disable native backlight control on pre-r6xx asics (v2)
  drm/i915: Kick fbdev before vgacon
  drm/i915: drop WaSetupGtModeTdRowDispatch:snb

Pull sound fixes from Takashi Iwai:
 "This batch ended up as a relatively high volume due to pending ASoC
  fixes.  But most of fixes there are trivial and/or device- specific
  fixes and quirks, so safe to apply.  The only (ASoC) core fixes are
  the DPCM race fix and the machine-driver matching fix for
  componentization"

* tag 'sound-3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix the mic mute led problem for Latitude E5550
  ALSA: hda - move DELL_WMI_MIC_MUTE_LED to the tail in the quirk chain
  ASoC: wm_adsp: Avoid attempt to free buffers that might still be in use
  ALSA: usb-audio: Set the Control Selector to SU_SELECTOR_CONTROL for UAC2
  ALSA: usb-audio: Add ctrl message delay quirk for Marantz/Denon devices
  ASoC: sgtl5000: Fix SMALL_POP bit definition
  ASoC: cs42l51: re-hook of_match_table pointer
  ASoC: rt5670: change dapm routes of PLL connection
  ASoC: rt5670: correct the incorrect default values
  ASoC: samsung: Add MODULE_DEVICE_TABLE for Snow
  ASoC: max98090: Correct pclk divisor settings
  ASoC: dpcm: Fix race between FE/BE updates and trigger
  ASoC: Fix snd_soc_find_dai() matching component by name
  ASoC: rsnd: remove unsupported PAUSE flag
  ASoC: fsi: remove unsupported PAUSE flag
  ASoC: rt5645: Mark RT5645_TDM_CTRL_3 as readable
  ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_rxctrl
  ASoC: es8328-i2c: Fix i2c_device_id name field in es8328_id
  ASoC: fsl_asrc: Add reg_defaults for regmap to fix kernel dump

Pull ACPI power management fix from Rafael Wysocki:
 "This is just a one-liner fixing a regression introduced in 3.13 that
  broke system suspend on some Chromebooks.

  On those machines there are ACPI device objects for some I2C devices
  that can wake up the system from sleep states, but that is done via a
  platform-specific mechanism and the ACPI objects don't contain any
  wakeup-related information.  When we started to use ACPI power
  management with those devices (which happened during the 3.13 cycle),
  their configuration confused the ACPI PM layer that returned error
  codes from suspend callbacks for them causing system suspend to fail.

  However, the ACPI PM layer can safely ignore the wakeup setting from a
  device driver if the ACPI object corresponding to the device in
  question doesn't contain wakeup information in which case the driver
  itself is responsible for setting up the device for system wakeup"

* tag 'pm+acpi-3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Ignore wakeup setting if the ACPI companion can't wake up

Pull devicetree fixes from Rob Herring:
 "DeviceTree fixes for 3.18:

   - two fixes for OF selftest code
   - fix for PowerPC address parsing to disable work-around except on
     old PowerMACs
   - fix a crash when earlycon is enabled, but no device is found
   - DT documentation fixes and missing vendor prefixes

  All but the doc updates are also for stable"

* tag 'devicetree-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/selftest: Fix testing when /aliases is missing
  of/selftest: Fix off-by-one error in removal path
  documentation: pinctrl bindings: Fix trivial typo 'abitrary'
  devicetree: bindings: Add vendor prefix for Micron Technology, Inc.
  of: Add vendor prefix for Chips&Media, Inc.
  of/base: Fix PowerPC address parsing hack
  devicetree: vendor-prefixes.txt: fix whitespace
  of: Fix crash if an earlycon driver is not found
  of/irq: Drop obsolete 'interrupts' vs 'interrupts-extended' text
  of: Spelling s/stucture/structure/
  devicetree: bindings: add sandisk to the vendor prefixes

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for an issue with 64-bit PCI bus addresses on 32-bit
  PAE kernels, an APM X-Gene problem (it depended on a generic change we
  removed before merging), a fix for my hotplug device configuration
  changes, and a devicetree documentation update.

  Resource management:
    - Support 64-bit bridge windows if we have 64-bit dma_addr_t (Yinghai Lu)

  PCI device hotplug:
    - Apply _HPX Link Control settings to all devices with a link (Yinghai Lu)

  Generic host bridge driver:
    - Add DT binding for "linux,pci-domain" property (Lucas Stach)

  APM X-Gene:
    - Assign resources to bus before adding new devices (Duc Dang)"

* tag 'pci-v3.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t
  PCI: Apply _HPX Link Control settings to all devices with a link
  PCI: Add missing DT binding for "linux,pci-domain" property
  PCI: xgene: Assign resources to bus before adding new devices

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the target-pending fixes queued for v3.18-rc6.

  The highlights include:

   - target-core OOPs fix with tcm_qla2xxx + vxworks FC initiators +
     zero length SCSI commands having a transfer direction set.  (Roland
     + Craig Watson)

   - vhost-scsi OOPs fix to explicitly prevent WWPN endpoint configfs
     group removal while qemu still has an active reference.  (Paolo +
     nab)

   - ib_srpt fix for RDMA hardware with lower srp_sq_size limits.
     (Bart)

   - two ib_isert work-arounds for running on ocrdma hardware (Or + Sagi
     + Chris)

   - iscsi-target discovery portal typo + SPC-3 PR Preempt SA key
     matching fix (Steve)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  IB/isert: Adjust CQ size to HW limits
  target: return CONFLICT only when SA key unmatched
  iser-target: Handle DEVICE_REMOVAL event on network portal listener correctly
  ib_isert: Add max_send_sge=2 minimum for control PDU responses
  srp-target: Retry when QP creation fails with ENOMEM
  iscsi-target: return the correct port in SendTargets
  vhost-scsi: Take configfs group dependency during VHOST_SCSI_SET_ENDPOINT
  target: Don't call TFO->write_pending if data_length == 0