Skip to content

L
linux
Switch branch/tag
  1. 10 Mar, 2019 23 commits
  3. 05 Mar, 2019 17 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.27 · adc2a008
      Greg Kroah-Hartman authored
      adc2a008
    • Andy Lutomirski's avatar
      x86/uaccess: Don't leak the AC flag into __put_user() value evaluation · 7371994d
      Andy Lutomirski authored 
      commit 2a418cf3 upstream.

When calling __put_user(foo(), ptr), the __put_user() macro would call
foo() in between __uaccess_begin() and __uaccess_end().  If that code
were buggy, then those bugs would be run without SMAP protection.

Fortunately, there seem to be few instances of the problem in the
kernel. Nevertheless, __put_user() should be fixed to avoid doing this.
Therefore, evaluate __put_user()'s argument before setting AC.

This issue was noticed when an objtool hack by Peter Zijlstra complained
about genregs_get() and I compared the assembly output to the C source.

 [ bp: Massage commit message and fixed up whitespace. ]

Fixes: 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses")
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.orgSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7371994d
    • Paul Burton's avatar
      MIPS: eBPF: Fix icache flush end address · 9f77e4cb
      Paul Burton authored 
      commit d1a2930d upstream.

The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.

The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.

Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9f77e4cb
    • Jonas Gorski's avatar
      MIPS: BCM63XX: provide DMA masks for ethernet devices · 4a418a3d
      Jonas Gorski authored 
      commit 18836b48 upstream.

The switch to the generic dma ops made dma masks mandatory, breaking
devices having them not set. In case of bcm63xx, it broke ethernet with
the following warning when trying to up the device:

[    2.633123] ------------[ cut here ]------------
[    2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc
[    2.647423] Modules linked in: gpio_button_hotplug
[    2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0
[    2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17
[    2.666707]         8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7
[    2.675325]         00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000
[    2.683954]         0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878
[    2.692572]         00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000
[    2.701191]         ...
[    2.703701] Call Trace:
[    2.706244] [<8001f3c8>] show_stack+0x58/0x100
[    2.710840] [<800336e4>] __warn+0xe4/0x118
[    2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64
[    2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc
[    2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c
[    2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4
[    2.735290] [<802d21b8>] dev_change_flags+0x28/0x70
[    2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0
[    2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224
[    2.749939] [<802af290>] sock_ioctl+0x30c/0x488
[    2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc
[    2.759459] [<80112c20>] ksys_ioctl+0x50/0x94
[    2.763955] [<800240b8>] syscall_common+0x34/0x58
[    2.768782] ---[ end trace fb1a6b14d74e28b6 ]---
[    2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512

Fix this by adding appropriate DMA masks for the platform devices.

Fixes: f8c55dc6 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
Signed-off-by: default avatarJonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4a418a3d
    • Michael Clark's avatar
      MIPS: fix truncation in __cmpxchg_small for short values · 3bfa6413
      Michael Clark authored 
      commit 94ee12b5 upstream.

__cmpxchg_small erroneously uses u8 for load comparison which can
be either char or short. This patch changes the local variable to
u32 which is sufficiently sized, as the loaded value is already
masked and shifted appropriately. Using an integer size avoids
any unnecessary canonicalization from use of non native widths.

This patch is part of a series that adapts the MIPS small word
atomics code for xchg and cmpxchg on short and char to RISC-V.

Cc: RISC-V Patches <patches@groups.riscv.org>
Cc: Linux RISC-V <linux-riscv@lists.infradead.org>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Signed-off-by: default avatarMichael Clark <michaeljclark@mac.com>
[paul.burton@mips.com:
  - Fix varialble typo per Jonas Gorski.
  - Consolidate load variable with other declarations.]
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Fixes: 3ba7f44d ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3bfa6413
    • Mike Kravetz's avatar
      hugetlbfs: fix races and page leaks during migration · 527cabff
      Mike Kravetz authored 
      commit cb6acd01 upstream.

hugetlb pages should only be migrated if they are 'active'.  The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.

When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked.  Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code.  This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.

To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.

Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available.  A program mmaps a 2G file in a hugetlbfs filesystem.  It
then migrates the pages associated with the file from one node to
another.  When the program exits, huge page counts are as follows:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  0       free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

That is as expected.  2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem.  If the file is then removed, the counts become:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  1024    free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use.  The only way to 'fix' the filesystem
accounting is to unmount the filesystem

If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field.  At migration
time, this information is not preserved.  To fix, simply transfer
page_private from old to new page at migration time if necessary.

There is a related race with removing a huge page from a file and
migration.  When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page().  A page could be migrated
while in this state.  However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.

To fix that, check for this condition before migrating a huge page.  If
the condition is detected, return EBUSY for the page.

Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
  Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
  Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      527cabff
    • Nicholas Kazlauskas's avatar
      drm: Block fb changes for async plane updates · f0233ca8
      Nicholas Kazlauskas authored 
      commit 22163229 upstream.

The prepare_fb call always happens on new_plane_state.

The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.

For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.

For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).

In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.

The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.

The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2

We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.

The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.

v2: Move check by itself, add a FIXME (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: default avatarNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: default avatarAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: default avatarHarry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f0233ca8
    • Jann Horn's avatar
      mm: enforce min addr even if capable() in expand_downwards() · de04d297
      Jann Horn authored 
      commit 0a1d5299 upstream.

security_mmap_addr() does a capability check with current_cred(), but
we can reach this code from contexts like a VFS write handler where
current_cred() must not be used.

This can be abused on systems without SMAP to make NULL pointer
dereferences exploitable again.

Fixes: 8869477a ("security: protect from stack expansion into low vm addresses")
Cc: stable@kernel.org
Signed-off-by: default avatarJann Horn <jannh@google.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      de04d297
    • BOUGH CHEN's avatar
      mmc: sdhci-esdhc-imx: correct the fix of ERR004536 · ff86bb4d
      BOUGH CHEN authored 
      commit e30be063 upstream.

Commit 18094430 ("mmc: sdhci-esdhc-imx: add ADMA Length
Mismatch errata fix") involve the fix of ERR004536, but the
fix is incorrect. Double confirm with IC, need to clear the
bit 7 of register 0x6c rather than set this bit 7.
Here is the definition of bit 7 of 0x6c:
    0: enable the new IC fix for ERR004536
    1: do not use the IC fix, keep the same as before

Find this issue on i.MX845s-evk board when enable CMDQ, and
let system in heavy loading.

root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M &
root@imx8mmevk:~# memtester 1000M > /dev/zero &
root@imx8mmevk:~# [  139.897220] mmc2: cqhci: timeout for tag 16
[  139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP ===========
[  139.907862] mmc2: cqhci: Caps:      0x0000310a | Version:  0x00000510
[  139.914311] mmc2: cqhci: Config:    0x00001001 | Control:  0x00000000
[  139.920753] mmc2: cqhci: Int stat:  0x00000000 | Int enab: 0x00000006
[  139.927193] mmc2: cqhci: Int sig:   0x00000006 | Int Coal: 0x00000000
[  139.933634] mmc2: cqhci: TDL base:  0x7809c000 | TDL up32: 0x00000000
[  139.940073] mmc2: cqhci: Doorbell:  0x00030000 | TCN:      0x00000000
[  139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000
[  139.952967] mmc2: cqhci: Task clr:  0x00000000 | SSC1:     0x00011000
[  139.959411] mmc2: cqhci: SSC2:      0x00000001 | DCMD rsp: 0x00000000
[  139.965857] mmc2: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x00000000
[  139.972308] mmc2: cqhci: Resp idx:  0x0000002e | Resp arg: 0x00000900
[  139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  139.985214] mmc2: sdhci: Sys addr:  0xb2c19000 | Version:  0x00000002
[  139.991669] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000400
[  139.998127] mmc2: sdhci: Argument:  0x40110400 | Trn mode: 0x00000033
[  140.004618] mmc2: sdhci: Present:   0x01088a8f | Host ctl: 0x00000030
[  140.011113] mmc2: sdhci: Power:     0x00000002 | Blk gap:  0x00000080
[  140.017583] mmc2: sdhci: Wake-up:   0x00000008 | Clock:    0x0000000f
[  140.024039] mmc2: sdhci: Timeout:   0x0000008f | Int stat: 0x00000000
[  140.030497] mmc2: sdhci: Int enab:  0x107f4000 | Sig enab: 0x107f4000
[  140.036972] mmc2: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000502
[  140.043426] mmc2: sdhci: Caps:      0x07eb0000 | Caps_1:   0x8000b407
[  140.049867] mmc2: sdhci: Cmd:       0x00002c1a | Max curr: 0x00ffffff
[  140.056314] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0xffffffff
[  140.062755] mmc2: sdhci: Resp[2]:   0x328f5903 | Resp[3]:  0x00d00f00
[  140.069195] mmc2: sdhci: Host ctl2: 0x00000008
[  140.073640] mmc2: sdhci: ADMA Err:  0x00000007 | ADMA Ptr: 0x7809c108
[  140.080079] mmc2: sdhci: ============================================
[  140.086662] mmc2: running CQE recovery

Fixes: 18094430 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix")
Signed-off-by: default avatarHaibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ff86bb4d
    • Alamy Liu's avatar
      mmc: cqhci: Fix a tiny potential memory leak on error condition · d612d7b4
      Alamy Liu authored 
      commit d07e9fad upstream.

Free up the allocated memory in the case of error return

The value of mmc_host->cqe_enabled stays 'false'. Thus, cqhci_disable
(mmc_cqe_ops->cqe_disable) won't be called to free the memory.  Also,
cqhci_disable() seems to be designed to disable and free all resources, not
suitable to handle this corner case.

Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host")
Signed-off-by: default avatarAlamy Liu <alamy.liu@gmail.com>
Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d612d7b4
    • Alamy Liu's avatar
      mmc: cqhci: fix space allocated for transfer descriptor · e446ae40
      Alamy Liu authored 
      commit 27ec9dc1 upstream.

There is not enough space being allocated when DCMD is disabled.

CQE_DCMD is not necessary to be enabled when CQE is enabled.
(Software could halt CQE to send command)

In the case that CQE_DCMD is not enabled, it still needs to allocate
space for data transfer. For instance:
  CQE_DCMD is enabled:  31 slots space (one slot used by DCMD)
  CQE_DCMD is disabled: 32 slots space

Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host")
Signed-off-by: default avatarAlamy Liu <alamy.liu@gmail.com>
Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e446ae40
    • Ritesh Harjani's avatar
      mmc: core: Fix NULL ptr crash from mmc_should_fail_request · 17bf9612
      Ritesh Harjani authored 
      commit e5723f95 upstream.

In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD).
In such case mmc_should_fail_request is directly dereferencing
mrq->cmd while cmd is NULL.
Fix this by checking for mrq->cmd pointer.

Fixes: 72a5af55 ("mmc: core: Add support for handling CQE requests")
Signed-off-by: default avatarRitesh Harjani <riteshh@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      17bf9612
    • Takeshi Saito's avatar
      mmc: tmio: fix access width of Block Count Register · 85d9ad40
      Takeshi Saito authored 
      commit 5603731a upstream.

In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().

If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.

So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.
Signed-off-by: default avatarTakeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@kernel.org
Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
[Ulf: Fixed build error]
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      85d9ad40
    • Sergei Shtylyov's avatar
      mmc: tmio_mmc_core: don't claim spurious interrupts · 5b716bc5
      Sergei Shtylyov authored 
      commit 5c27ff5d upstream.

I have encountered an interrupt storm during the eMMC chip probing (and
the chip finally didn't get detected).  It turned out that U-Boot left
the DMAC interrupts enabled while the Linux driver  didn't use those.
The SDHI driver's interrupt handler somehow assumes that, even if an
SDIO interrupt didn't happen, it should return IRQ_HANDLED.  I think
that if none of the enabled interrupts happened and got handled, we
should return IRQ_NONE -- that way the kernel IRQ code recoginizes
a spurious interrupt and masks it off pretty quickly...

Fixes: 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers")
Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5b716bc5
    • Jonathan Neuschäfer's avatar
      mmc: spi: Fix card detection during probe · c69e07a8
      Jonathan Neuschäfer authored 
      commit c9bd505d upstream.

When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).

The call tree looks something like this:

mmc_spi_probe
  mmc_add_host
    mmc_start_host
      _mmc_detect_change
        mmc_schedule_delayed_work(&host->detect, 0)
          mmc_rescan
            host->bus_ops->detect(host)
              mmc_detect
                _mmc_detect_card_removed
                  host->ops->get_cd(host)
                    mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
  mmc_gpiod_request_cd
    ctx->cd_gpio = desc

To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: default avatarJonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c69e07a8
    • Ben Gardon's avatar
      kvm: selftests: Fix region overlap check in kvm_util · b246986a
      Ben Gardon authored 
      [ Upstream commit 94a980c3 ]

Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.

Tested: Compiled tools/testing/selftests/kvm with -static
	Ran all resulting test binaries on an Intel Haswell test machine
	All tests passed
Signed-off-by: default avatarBen Gardon <bgardon@google.com>
Reviewed-by: default avatarJim Mattson <jmattson@google.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b246986a
    • Vitaly Kuznetsov's avatar
      KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1 · 60a4b3f7
      Vitaly Kuznetsov authored 
      [ Upstream commit 619ad846 ]

kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.

It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d5799 ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      60a4b3f7
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7