- 22 Sep, 2022 8 commits
-
-
Saurabh Sengar authored
Current code produces a warning as shown below when total characters in the constituent block device names plus the slashes exceeds 200. snprintf() returns the number of characters generated from the given input, which could cause the expression “200 – len” to wrap around to a large positive number. Fix this by using scnprintf() instead, which returns the actual number of characters written into the buffer. [ 1513.267938] ------------[ cut here ]------------ [ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510 [ 1513.267944] Modules linked in: <snip> [ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu [ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510 <-snip-> [ 1513.267982] Call Trace: [ 1513.267986] snprintf+0x45/0x70 [ 1513.267990] ? disk_name+0x71/0xa0 [ 1513.267993] dump_zones+0x114/0x240 [raid0] [ 1513.267996] ? _cond_resched+0x19/0x40 [ 1513.267998] raid0_run+0x19e/0x270 [raid0] [ 1513.268000] md_run+0x5e0/0xc50 [ 1513.268003] ? security_capable+0x3f/0x60 [ 1513.268005] do_md_run+0x19/0x110 [ 1513.268006] md_ioctl+0x195e/0x1f90 [ 1513.268007] blkdev_ioctl+0x91f/0x9f0 [ 1513.268010] block_ioctl+0x3d/0x50 [ 1513.268012] do_vfs_ioctl+0xa9/0x640 [ 1513.268014] ? __fput+0x162/0x260 [ 1513.268016] ksys_ioctl+0x75/0x80 [ 1513.268017] __x64_sys_ioctl+0x1a/0x20 [ 1513.268019] do_syscall_64+0x5e/0x200 [ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 76603884 ("md/raid0: replace printk() with pr_*()") Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Guoqing Jiang authored
With W=1, compiler complains. drivers/md/raid10.c:1983: warning: bad line: Signed-off-by:
-
XU pengfei authored
Fix spelling of 'waitting' in comments. Signed-off-by:
XU pengfei <xupengfei@nfschina.com> Signed-off-by:
-
Li Jinlin authored
Since blk-ioprio handing was converted from a rqos policy to a direct call, RQ_QOS_IOPRIO is not used anymore, just delete it. Signed-off-by:
Li Jinlin <lijinlin3@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220916023241.32926-1-lijinlin3@huawei.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Liu Shixin authored
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220915023424.3198940-1-liushixin2@huawei.comSigned-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by:
Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20220818205958.6552-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Gaosheng Cui authored
All implementations of req->collision, _req_may_be_done and drbd_fail_pending_reads have been removed, so remove the comments in receive_DataReply() that provide no useful information. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by:
-
Gaosheng Cui authored
The _req_may_be_done() has been removed by commit 6870ca6d ("drbd: factor out master_bio completion and drbd_request destruction paths"), so remove the orphan declaration. Signed-off-by:
-
- 21 Sep, 2022 13 commits
-
-
Yu Kuai authored
Our test found a problem that wbt inflight counter is negative, which will cause io hang(noted that this problem doesn't exist in mainline): t1: device create t2: issue io add_disk blk_register_queue wbt_enable_default wbt_init rq_qos_add // wb_normal is still 0 /* * in mainline, disk can't be opened before * bdev_add(), however, in old kernels, disk * can be opened before blk_register_queue(). */ blkdev_issue_flush // disk size is 0, however, it's not checked submit_bio_wait submit_bio blk_mq_submit_bio rq_qos_throttle wbt_wait bio_to_wbt_flags rwb_enabled // wb_normal is 0, inflight is not increased wbt_queue_depth_changed(&rwb->rqos); wbt_update_limits // wb_normal is initialized rq_qos_track wbt_track rq->wbt_flags |= bio_to_wbt_flags(rwb, bio); // wb_normal is not 0，wbt_flags will be set t3: io completion blk_mq_free_request rq_qos_done wbt_done wbt_is_tracked // return true __wbt_done wbt_rqw_done atomic_dec_return(&rqw->inflight); // inflight is decreased commit 8235b5c1 ("block: call bdev_add later in device_add_disk") can avoid this problem, however it's better to fix this problem in wbt: 1) Lower kernel can't backport this patch due to lots of refactor. 2) Root cause is that wbt call rq_qos_add() before wb_normal is initialized. Fixes: e34cbd30 ("blk-wbt: add general throttling mechanism") Cc: <stable@vger.kernel.org> Signed-off-by:Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.comSigned-off-by:
-
Christoph Hellwig authored
Given that rnbd_srv_sess_dev already has an open_flags member, there is no need for the rnbd_dev indirection as a simple block_device pointer works just as well. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220909131509.3263924-5-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
These can be trivially open coded in the callers. Signed-off-by:
-
Christoph Hellwig authored
Fold rnbd_endio into the only caller. Signed-off-by:
-
Christoph Hellwig authored
Remove all the wrappers and just get the information directly from the block device, or where no such helpers exist the request_queue. Signed-off-by:
-
Bart Van Assche authored
The documentation of the blk_eh_timer_return enumeration values does not reflect correctly how e.g. the SCSI core uses these values. Fix the documentation. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Fixes: 88b0cfad ("block: document the blk_eh_timer_return values") Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220920200626.3422296-1-bvanassche@acm.orgSigned-off-by:
-
Stefan Haberland authored
Add a function to check if a device is accessible. This makes mostly sense for copy pair secondary devices but it will work for all devices. The sysfs attribute ping is a write only attribute and will issue a NOP CCW to the device. In case of success it will return zero. If the device is not accessible it will return an error code. Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220920192616.808070-8-sth@linux.ibm.comSigned-off-by:
-
Stefan Haberland authored
Suppress generic command reject messages and dump of sense data for Peer-To-Peer-Remote-Copy (PPRC) secondary errors. If IO is issued on a PPRC secondary device, a specific error message is printed instead. Signed-off-by:
-
Stefan Haberland authored
The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that specifies a copy pair that should be swapped. It will call the device discipline function to perform the swap operation. The structure looks as followed: struct dasd_copypair_swap_data_t { char primary[20]; char secondary[20]; __u8 reserved[64]; }; where primary is the old primary device that will be replaced by the secondary device. The old primary will become a secondary device afterwards. Signed-off-by: -
Stefan Haberland authored
In case of errors or misbehaviour of the primary device a controlled failover to one of the configured secondary devices needs to be performed. The swap processing stops I/O on the primary device, all requests are re-queued to the blocklayer queue, the entries in the copy relation are swapped and finally the link to the blockdevice is moved from primary to secondary dasd device. After this, the secondary becomes the new primary device and I/O is restarted on that device. Signed-off-by:
-
Stefan Haberland authored
A copy relation that is configured on the storage server side needs to be enabled separately in the device driver. A sysfs interface is created that allows userspace tooling to control such setup. The following sysfs entries are added to store and read copy relation information: copy_pair - Add/Delete a copy pair relation to the DASD device driver - Query all previously added copy pair relations copy_role - Query the copy pair role of the device To add a copy pair to the DASD device driver it has to be specified through the sysfs attribute copy_pair. Only one secondary device can be specified at a time together with the primary device. Both, secondary and primary can be used equally to define the copy pair. The secondary devices have to be offline when adding the copy relation. The primary device needs to be specified first followed by the comma separated secondary device. Read from the copy_pair attribute to get the current setup and write "clear" to the attribute to delete any existing setup. Example: $ echo 0.0.9700,0.0.9740 > /sys/bus/ccw/devices/0.0.9700/copy_pair $ cat /sys/bus/ccw/devices/0.0.9700/copy_pair 0.0.9700,0.0.9740 During device online processing the required data will be read from the storage server and the information will be compared to the setup requested through the copy_pair attribute. The registration of the primary and secondary device will be handled accordingly. A blockdevice is only allocated for copy relation primary devices. To query the copy role of a device read from the copy_role sysfs attribute. Possible values are primary, secondary, and none. Example: $ cat /sys/bus/ccw/devices/0.0.9700/copy_role primary Signed-off-by: -
Stefan Haberland authored
Add function to query the Peer-to-Peer-Remote-Copy (PPRC) state of a device by reading the related structure through a read subsystem data call. Signed-off-by:
-
Stefan Haberland authored
Put block allocation into a separate function to put some copy pair logic in it in a later patch. Signed-off-by:
-
- 20 Sep, 2022 8 commits
-
-
Li zeming authored
The key pointer is void and hence does not need an explicit cast. Signed-off-by:
Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20220919012825.2936-1-zeming@nfschina.comSigned-off-by:
-
Christoph Hellwig authored
PSI accounting is now done by the VM code, where it should have been since the beginning. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20220915094200.139713-6-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
erofs uses an additional address space for compressed data read from disk in addition to the one directly associated with the inode. Reading into the lower address space is open coded using add_to_page_cache_lru instead of using the filemap.c helper for page allocation micro-optimizations, which means it is not covered by the MM PSI annotations for ->read_folio and ->readahead, so add manual ones instead. Signed-off-by:
Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20220915094200.139713-5-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
btrfs compressed reads try to always read the entire compressed chunk, even if only a subset is requested. Currently this is covered by the magic PSI accounting underneath submit_bio, but that is about to go away. Instead add manual psi_memstall_{enter,leave} annotations. Note that for readahead this really should be using readahead_expand, but the additionals reads are also done for plain ->read_folio where readahead_expand can't work, so this overall logic is left as-is for now. Signed-off-by:David Sterba <dsterba@suse.com> Acked-by:
-
Christoph Hellwig authored
To properly account for all refaults from file system logic, file systems need to call psi_memstall_enter directly, so export it. Signed-off-by:
-
Christoph Hellwig authored
PSI tries to account for the cost of bringing back in pages discarded by the MM LRU management. Currently the prime place for that is hooked into the bio submission path, which is a rather bad place: - it does not actually account I/O for non-block file systems, of which we have many - it adds overhead and a layering violation to the block layer Add the accounting into the two places in the core MM code that read pages into an address space by calling into ->read_folio and ->readahead so that the entire file system operations are covered, to broaden the coverage and allow removing the accounting in the block layer going forward. As psi_memstall_enter can deal with nested calls this will not lead to double accounting even while the bio annotations are still present. Signed-off-by:
-
Ping-Xiang Chen authored
This patch fix a comment typo in block-core.c. Signed-off-by:
Ping-Xiang Chen <p.x.chen@uci.edu> Reviewed-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 6.1 - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)" * tag 'nvme-6.1-2022-09-20' of git://git.infradead.org/nvme: nvme-tcp: print actual source IP address through sysfs "address" attr nvmet-tcp: don't map pages which can't come from HIGHMEM nvme-pci: move iod dma_len fill gaps nvme-pci: iod npages fits in s8 nvme-pci: iod's 'aborted' is a bool nvme-pci: remove nvme_queue from nvme_iod nvme: consider also host_iface when checking ip options nvme-rdma: handle number of queue changes nvme-tcp: handle number of queue changes nvmet: expose max queues to configfs nvmet: avoid unnecessary flush bio nvmet-auth: remove redundant parameters req nvmet-auth: clean up with done_kfree nvme-auth: remove the redundant req->cqe->result.u16 assignment operation nvme: move from strlcpy with unused retval to strscpy nvme: add comment for unaligned "fake" nqn
-
- 19 Sep, 2022 11 commits
-
-
Coly Li authored
Inside set_at_max_writeback_rate() the calculation in following if() check is wrong, if (atomic_inc_return(&c->idle_counter) < atomic_read(&c->attached_dev_nr) * 6) Because each attached backing device has its own writeback thread running and increasing c->idle_counter, the counter increates much faster than expected. The correct calculation should be, (counter / dev_nr) < dev_nr * 6 which equals to, counter < dev_nr * dev_nr * 6 This patch fixes the above mistake with correct calculation, and helper routine idle_counter_exceeded() is added to make code be more clear. Reported-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
Coly Li <colyli@suse.de> Acked-by:
-
Jilin Yuan authored
Delete the redundant word 'we'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Jules Maselbas authored
Remove the redundant word `by`, correct the typo `creaated`. CC: Kent Overstreet <kent.overstreet@gmail.com> CC: linux-bcache@vger.kernel.org Signed-off-by:
Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by:
-
Lin Feng authored
This is a cleanup for commit 1616a4c2 ("bcache: remove bcache device self-defined readahead")', currently no user for bch_mark_cache_readahead() since that commit. Signed-off-by:
Lin Feng <linf@wangsu.com> Signed-off-by:
-
Li Lei authored
All pending works will be drained by destroy_workqueue(), no need to call flush_workqueue() explicitly. Signed-off-by:
Li Lei <lilei@szsandstone.com> Signed-off-by:
-
Martin Belanger authored
TCP transport relies on the routing table to determine which source address and interface to use when making a connection. Currently, there is no way to tell from userspace where a connection was made. This patch exposes the actual source address using a new field named "src_addr=" in the "address" attribute. This is needed to diagnose and identify connectivity issues. With the source address we can infer the interface associated with each connection. This was tested with nvme-cli 2.0 to verify it does not have any adverse effect. The new "src_addr=" field will simply be displayed in the output of the "list-subsys" or "list -v" commands as shown here. $ nvme list-subsys nvme-subsys0 - NQN=nqn.2014-08.org.nvmexpress.discovery \ +- nvme0 tcp traddr=192.168.56.1,trsvcid=8009,src_addr=192.168.56.101 live Signed-off-by:
Martin Belanger <martin.belanger@dell.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Fabio M. De Francesco authored
kmap() is being deprecated in favor of kmap_local_page().[1] There are two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. The pages which will be mapped are allocated in nvmet_tcp_map_data(), using the GFP_KERNEL flag. This assures that they cannot come from HIGHMEM. This imply that a straight page_address() can replace the kmap() of sg_page(sg) in nvmet_tcp_map_pdu_iovec(). As a side effect, we might also delete the field "nr_mapped" from struct "nvmet_tcp_cmd" because, after removing the kmap() calls, there would be no longer any need of it. In addition, there is no reason to use a kvec for the command receive data buffers iovec, use a bio_vec instead and let iov_iter handle the buffer mapping and data copy. Test with blktests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. [1] "[PATCH] checkpatch: Add kmap and kmap_atomic to the deprecated list" https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/ Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com> Cc: Keith Busch <kbusch@kernel.org> Suggested-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> [sagi: added bio_vec plus minor naming changes] Signed-off-by:
-
Keith Busch authored
The 32-bit field, dma_len, packs better in the iod struct above the dma_addr_t on 64-bit systems. Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Keith Busch authored
The largest allowed transfer is 4MB, which can use at most 1025 PRPs. Each PRP is 8 bytes, so the maximum number of 4k nvme pages needed for the iod_list is 3, which fits in an 's8' type. While modifying this field, change the name to "nr_allocations" to better represent that this is referring to the number of units allocated from a dma_pool. Also introduce a BUILD_BUG_ON to ensure we never accidently increase the largest transfer limit beyond 127 chained prp lists. Reviewed-by:
-
Keith Busch authored
It's only true or false, so make this a bool to reflect that and save some space in nvme_iod. Reviewed-by:
-
Keith Busch authored
We can get the nvme_queue from the req just as easily, so remove the duplicate path to the same structure to save some space. Signed-off-by:
-
