Skip to content

L
linux
Switch branch/tag
  1. 16 Jul, 2021 37 commits
  3. 15 Jul, 2021 3 commits
    • Daniel Borkmann's avatar
      Merge branch 'bpf-timers' · 76283171
      Daniel Borkmann authored 
      Alexei Starovoitov says:

====================
The first request to support timers in bpf was made in 2013 before sys_bpf
syscall was added. That use case was periodic sampling. It was address with
attaching bpf programs to perf_events. Then during XDP development the timers
were requested to do garbage collection and health checks. They were worked
around by implementing timers in user space and triggering progs with
BPF_PROG_RUN command. The user space timers and perf_event+bpf timers are not
armed by the bpf program. They're done asynchronously vs program execution.
The XDP program cannot send a packet and arm the timer at the same time. The
tracing prog cannot record an event and arm the timer right away. This large
class of use cases remained unaddressed. The jiffy based and hrtimer based
timers are essential part of the kernel development and with this patch set
the hrtimer based timers will be available to bpf programs.

TLDR: bpf timers is a wrapper of hrtimers with all the extra safety added
to make sure bpf progs cannot crash the kernel.

v6->v7:
- address Andrii's comments and add his Acks.

v5->v6:
- address code review feedback from Martin and add his Acks.
- add usercnt > 0 check to bpf_timer_init and remove timers_cancel_and_free
second loop in map_free callbacks.
- add cond_resched_rcu.

v4->v5:
- Martin noticed the following issues:
. prog could be reallocated bpf_patch_insn_data().
Fixed by passing 'aux' into bpf_timer_set_callback, since 'aux' is stable
during insn patching.
. Added missing rcu_read_lock.
. Removed redundant record_map.
- Discovered few bugs with stress testing:
. One cpu does htab_free_prealloced_timers->bpf_timer_cancel_and_free->hrtimer_cancel
while another is trying to do something with the timer like bpf_timer_start/set_callback.
Those ops try to acquire bpf_spin_lock that is already taken by bpf_timer_cancel_and_free,
so both cpus spin forever. The same problem existed in bpf_timer_cancel().
One bpf prog on one cpu might call bpf_timer_cancel and wait, while another cpu is in
the timer callback that tries to do bpf_timer_*() helper on the same timer.
The fix is to do drop_prog_refcnt() and unlock. And only then hrtimer_cancel.
Because of this had to add callback_fn != NULL check to bpf_timer_cb().
Also removed redundant bpf_prog_inc/put from bpf_timer_cb() and replaced
with rcu_dereference_check similar to recent rcu_read_lock-removal from drivers.
bpf_timer_cb is in softirq.
. Managed to hit refcnt==0 while doing bpf_prog_put from bpf_timer_cancel_and_free().
That exposed the issue that bpf_prog_put wasn't ready to be called from irq context.
Fixed similar to bpf_map_put which is irq ready.
- Refactored BPF_CALL_1(bpf_spin_lock) into __bpf_spin_lock_irqsave() to
make the main logic more clear, since Martin and Yonghong brought up this concern.

v3->v4:
1.
Split callback_fn from bpf_timer_start into bpf_timer_set_callback as
suggested by Martin. That makes bpf timer api match one to one to
kernel hrtimer api and provides greater flexibility.
2.
Martin also discovered the following issue with uref approach:
bpftool prog load xdp_timer.o /sys/fs/bpf/xdp_timer type xdp
bpftool net attach xdpgeneric pinned /sys/fs/bpf/xdp_timer dev lo
rm /sys/fs/bpf/xdp_timer
nc -6 ::1 8888
bpftool net detach xdpgeneric dev lo
The timer callback stays active in the kernel though the prog was detached
and map usercnt == 0.
It happened because 'bpftool prog load' pinned the prog only.
The map usercnt went to zero. Subsequent attach and runs didn't
affect map usercnt. The timer was able to start and bpf_prog_inc itself.
When the prog was detached the prog stayed active.
To address this issue added
if (!atomic64_read(&(t->map->usercnt))) return -EPERM;
to the first patch.
Which means that timers are allowed only in the maps that are held
by user space with open file descriptor or maps pinned in bpffs.
3.
Discovered that timers in inner maps were broken.
The inner map pointers are dynamic. Therefore changed bpf_timer_init()
to accept explicit map pointer supplied by the program instead
of hidden map pointer supplied by the verifier.
To make sure that pointer to a timer actually belongs to that map
added the verifier check in patch 3.
4.
Addressed Yonghong's feedback. Improved comments and added
dynamic in_nmi() check.
Added Acks.

v2->v3:
The v2 approach attempted to bump bpf_prog refcnt when bpf_timer_start is
called to make sure callback code doesn't disappear when timer is active and
drop refcnt when timer cb is done. That led to a ton of race conditions between
callback running and concurrent bpf_timer_init/start/cancel on another cpu,
and concurrent bpf_map_update/delete_elem, and map destroy.

Then v2.5 approach skipped prog refcnt altogether. Instead it remembered all
timers that bpf prog armed in a link list and canceled them when prog refcnt
went to zero. The race conditions disappeared, but timers in map-in-map could
not be supported cleanly, since timers in inner maps have inner map's life time
and don't match prog's life time.

This v3 approach makes timers to be owned by maps. It allows timers in inner
maps to be supported from the start. This apporach relies on "user refcnt"
scheme used in prog_array that stores bpf programs for bpf_tail_call. The
bpf_timer_start() increments prog refcnt, but unlike 1st approach the timer
callback does decrement the refcnt. The ops->map_release_uref is
responsible for cancelling the timers and dropping prog refcnt when user space
reference to a map is dropped. That addressed all the races and simplified
locking.

Andrii presented a use case where specifying callback_fn in bpf_timer_init()
is inconvenient vs specifying in bpf_timer_start(). The bpf_timer_init()
typically is called outside for timer callback, while bpf_timer_start() most
likely will be called from the callback.
timer_cb() { ... bpf_timer_start(timer_cb); ...} looks like recursion and as
infinite loop to the verifier. The verifier had to be made smarter to recognize
such async callbacks. Patches 7,8,9 addressed that.

Patch 1 and 2 refactoring.
Patch 3 implements bpf timer helpers and locking.
Patch 4 implements map side of bpf timer support.
Patch 5 prevent pointer mismatch in bpf_timer_init.
Patch 6 adds support for BTF in inner maps.
Patch 7 teaches check_cfg() pass to understand async callbacks.
Patch 8 teaches do_check() pass to understand async callbacks.
Patch 9 teaches check_max_stack_depth() pass to understand async callbacks.
Patches 10 and 11 are the tests.

v1->v2:
- Addressed great feedback from Andrii and Toke.
- Fixed race between parallel bpf_timer_*() ops.
- Fixed deadlock between timer callback and LRU eviction or bpf_map_delete/update.
- Disallowed mmap and global timers.
- Allow spin_lock and bpf_timer in an element.
- Fixed memory leaks due to map destruction and LRU eviction.
- A ton more tests.
====================
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      76283171
    • Alexei Starovoitov's avatar
      selftests/bpf: Add a test with bpf_timer in inner map. · 61f71e74
      Alexei Starovoitov authored 
      Check that map-in-map supports bpf timers.

Check that indirect "recursion" of timer callbacks works:
timer_cb1() { bpf_timer_set_callback(timer_cb2); }
timer_cb2() { bpf_timer_set_callback(timer_cb1); }

Check that
  bpf_map_release
    htab_free_prealloced_timers
      bpf_timer_cancel_and_free
        hrtimer_cancel
works while timer cb is running.
"while true; do ./test_progs -t timer_mim; done"
is a great stress test. It caught missing timer cancel in htab->extra_elems.

timer_mim_reject.c is a negative test that checks
that timer<->map mismatch is prevented.
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Acked-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-12-alexei.starovoitov@gmail.com
      61f71e74
    • Alexei Starovoitov's avatar
      selftests/bpf: Add bpf_timer test. · 3540f7c6
      Alexei Starovoitov authored 
      Add bpf_timer test that creates timers in preallocated and
non-preallocated hash, in array and in lru maps.
Let array timer expire once and then re-arm it for 35 seconds.
Arm lru timer into the same callback.
Then arm and re-arm hash timers 10 times each.
At the last invocation of prealloc hash timer cancel the array timer.
Force timer free via LRU eviction and direct bpf_map_delete_elem.
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Acked-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-11-alexei.starovoitov@gmail.com
      3540f7c6
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7