Tom Herbert says:

====================
gro: Fixes for tunnels and GRO

This patch set addresses some issue related to tunneling and GRO:

- Fix remote checksum offload to properly deal with frag0 in GRO.
- Add support for GRO at VXLAN tunnel (call gro_cells)

Testing: Ran one netperf TCP_STREAM to highlight impact of different
configurations:

GUE
  Zero UDP checksum
    4628.42 MBps
  UDP checksums enabled
    6800.51 MBps
  UDP checksums and remote checksum offload
    7663.82 MBps
  UDP checksums and remote checksum offload using no-partial
    7287.25 MBps

VXLAN
  Zero UDP checksum
    4112.02
  UDP checksums enabled
    6785.80 MBps
  UDP checksums and remote checksum offload
    7075.56 MBps

v2:
  - Drop "gro: Pull headers into skb head for 1st skb in gro list"
    from patch set
  - In vxlan_remcsum and gue_remcsum return immediately if remcsum
    processing was already done
  - Add gro callbacks for sit offload
  - Use WARN_ON_ONCE if we get a GUE protocol that does not have
    GRO offload support

v3:
  - Don't restore gro callbacks for sit offload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do WARN_ON_ONCE instead of WARN_ON in gue_gro_receive when the offload
callcaks are bad (either don't exist or gro_receive is not specified).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add calls to gro_cells infrastructure to do GRO when receiving on a tunnel.

Testing:

Ran 200 netperf TCP_STREAM instance

  - With fix (GRO enabled on VXLAN interface)

    Verify GRO is happening.

    9084 MBps tput
    3.44% CPU utilization

  - Without fix (GRO disabled on VXLAN interface)

    Verified no GRO is happening.

    9084 MBps tput
    5.54% CPU utilization
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The remote checksum offload GRO did not consider the case that frag0
might be in use. This patch fixes that by accessing headers using the
skb_gro functions and not saving offsets relative to skb->head.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If you simply load and unload the module without starting the interfaces,
the queues are never created and you get a bad pointer dereference.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current Secure port mode requires the port-based VLANs to also be
valid in the 802.1Q VLAN Table Unit. The current hardware bridging
support only configures the port-based VLANs, thus is broken.

A new patchset is required to adapt the hardware bridging code to fully
support the Secure port mode.

In the meantime, change the 802.1Q mode of every ports to Fallback,
which filtering is more permissive, and doesn't add this restriction to
handle port-based and tagged-based VLANs.

Fixes: 8efdda4a ("net: dsa: mv88e6xxx: use port 802.1Q mode Secure")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/usb/qmi_wwan.c

Overlapping additions of new device IDs to qmi_wwan.c
Signed-off-by: David S. Miller <davem@davemloft.net>

err_out_vnic_unregister is used regardless of whether
SRIOV is enabled or not.
Reported-by: Jesse Brandeburg <jesse.brangeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

This is second pull request includes the conflict resolution patch that
resulted from the updates that we got for the conntrack template through
kmalloc. No changes with regards to the previously sent 15 patches.

The following patchset contains Netfilter updates for your net-next tree, they
are:

1) Rework the existing nf_tables counter expression to make it per-cpu.

2) Prepare and factor out common packet duplication code from the TEE target so
   it can be reused from the new dup expression.

3) Add the new dup expression for the nf_tables IPv4 and IPv6 families.

4) Convert the nf_tables limit expression to use a token-based approach with
   64-bits precision.

5) Enhance the nf_tables limit expression to support limiting at packet byte.
   This comes after several preparation patches.

6) Add a burst parameter to indicate the amount of packets or bytes that can
   exceed the limiting.

7) Add netns support to nfacct, from Andreas Schultz.

8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow
   accessing more zone specific information, from Daniel Borkmann.

9) Allow to define zone per-direction to support netns containers with
   overlapping network addressing, also from Daniel.

10) Extend the CT target to allow setting the zone based on the skb->mark as a
   way to support simple mappings from iptables, also from Daniel.

11) Make the nf_tables payload expression aware of the fact that VLAN offload
    may have removed a vlan header, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Resolve conflicts with conntrack template fixes.

Conflicts:
	net/netfilter/nf_conntrack_core.c
	net/netfilter/nf_synproxy_core.c
	net/netfilter/xt_CT.c
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI backlight code and a memory
  leak in the Exynos cpufreq driver.

  Specifics:

   - Fix a recently introduced issue in the ACPI backlight code which
     causes lockdep to complain about a circular lock dependency during
     initialization (Hans de Goede).

   - Fix a possible memory during initialization in the Exynos cpufreq
     driver (Shailendra Verma)"

* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
  ACPI / video: Fix circular lock dependency issue in the video-detect code

Jiri Benc says:

====================
lwtunnel: per route ipv6 support for vxlan

v3: Moved LWTUNNEL_ENCAP_IP6 definition in patch 13.
v2: Fixed issues in patch 4 pointed out by Alexei.

This series enables IPv6 tunnels based on lwtunnel infrastructure. Only
vxlan is supported for now.

Tested in all combinations of IPv4 over IPv6, IPv6 over IPv4 and IPv6 over
IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow specification of per route IP tunnel instructions also for IPv6.
This complements commit 3093fbe7 ("route: Per route IP tunnel metadata
via lightweight tunnel").
Signed-off-by: Jiri Benc <jbenc@redhat.com>
CC: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use flowi_tunnel in flowi6 similarly to what is done with IPv4.
This complements commit 1b7179d3 ("route: Extend flow representation
with tunnel key").
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support metadata based (formerly flow based) tunneling also for IPv6.
This complements commit ee122c79 ("vxlan: Flow based tunneling").
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'flags' variable is already defined in the outer scope.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

If output device wants to see the dst, inherit the dst of the original skb
in the ndisc request.

This is an IPv6 counterpart of commit 0accfc26 ("arp: Inherit metadata
dst when creating ARP requests").
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fix in commit 48fb6b55 is incomplete, as now ip6_route_input can be
called with non-NULL dst if it's a metadata dst and the reference is leaked.
Drop the reference.

Fixes: 48fb6b55 ("ipv6: fix crash over flow-based vxlan device")
Fixes: ee122c79 ("vxlan: Flow based tunneling")
CC: Wei-Chun Chao <weichunc@plumgrid.com>
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.

As a bonus, this brings a nice diffstat.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ip_tunnels.h include file uses mixture of __u16 and u16 (etc.) types.
Unify it to the non-underscore variants.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The custom alignment of struct ip_tunnel_key is unnecessary. In struct
sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the
first field.

The structure is also packed even without the __packed keyword.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

* acpi-video:
  ACPI / video: Fix circular lock dependency issue in the video-detect code

* cpufreq-fixes:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match

Convert the xgene_get_mac_address to device_get_mac_address(), and
xgene_get_phy_mode() to device_get_phy_mode().
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andreas reported breakage adding routes with local nexthops:
$ ip route show table main
...
172.28.0.0/24 dev vnf-xe1p0  proto kernel  scope link  src 172.28.0.16

$ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0
RTNETLINK answers: Resource temporarily unavailable

3bfd8472 changed the lookup to use the passed in table but for cases like
this the nexthop is in the local table rather than the passed in table.

Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups")
Reported-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

.maxtype should match .policy.  Probably just been getting lucky here
because IFLA_BRPORT_MAX > IFLA_BR_MAX.

Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink")
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dev==NULL check in smsc911x_probe_config is useless
and isn't providing any additional protection. If a fwnode
doesn't exist then an appropriate error should be returned
by device_get_phy_mode() covering the original case
of a missing of/fwnode.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds MAC address length check back into
the device_get_mac_addr() function before calling
is_valid_ether_addr() similar to the way the OF
routine does it.

Update the comments for the two new functions.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath10k:

* add support for qca99x0 family of devices
* improve performance of tx_lock
* add support for raw mode (802.11 frame format) and software crypto
  engine enabled via a module parameter

ath9k:

* add fast-xmit support

wil6210:

* implement TSO support
* support bootloader v1 and onwards

iwlwifi:

* Deprecate -10.ucode
* Clean ups towards multiple Rx queues
* Add support for longer CMD IDs. This will be required by new
  firmwares since we are getting close to the u8 limit.
* bugfixes for the D0i3 power state
* Add basic support for FTM
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make fib_encap_match() static as it isn't used outside the file.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
average: convert users to inline implementation

Since there's very little benefit of the out-of-line implementation
(a single byte of .text in one driver as far as I've seen), convert
all drivers to the inline implementation, saving memory, and remove
the out-of-line implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since all users are now converted to the inline implementation,
remove the out-of-line implementation entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in code that's one
byte larger (for me), but reduces struct link_ant and struct link
size by the two unsigned long values that store the parameters each.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reduces code size slightly (at least on x86/64) while also
removing memory consumption by two unsigned long values for each
ath5k device.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in no change in code
size for me, but reduces the struct receive_queue size by the two
unsigned long values that store the parameters.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f34fa14c ("bnx2x: Add vxlan RSS support") has introduced an
endianity issue when passing the vxlan UDP port to the HW.

Reported-by: <fengguang.wu@intel.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
vrf: cleanups part 2

This is the next part of vrf cleanups, patch 1 drops the SLAB_PANIC
when creating kmem cache since it's handled, patch 02 removes a slave
duplicate check which is already done by the lower/upper code, patch 3
moves the ndo_add_slave code around a bit so we can drop an error
label and patch 4 drops the master device checks which are unnecessary
because the ops are taken from the master device itself so it can't be
different.
====================
Acked-by: David Ahern <dsa@cumulusnetworks.com>