ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel

ACPICA commit cac6790954d4d752a083e6122220b8a22febcd07

This patch back ports Linux acpi_get_table_with_size() and
early_acpi_os_unmap_memory() into ACPICA upstream to reduce divergences.

The 2 APIs are used by Linux as table management APIs for long time, it
contains a hidden logic that during the early stage, the mapped tables
should be unmapped before the early stage ends.

During the early stage, tables are handled by the following sequence:
 acpi_get_table_with_size();
 parse the table
 early_acpi_os_unmap_memory();
During the late stage, tables are handled by the following sequence:
 acpi_get_table();
 parse the table
Linux uses acpi_gbl_permanent_mmap to distinguish the early stage and the
late stage.

The reasoning of introducing acpi_get_table_with_size() is: ACPICA will
remember the early mapped pointer in acpi_get_table() and Linux isn't able to
prevent ACPICA from using the wrong early mapped pointer during the late
stage as there is no API provided from ACPICA to be an inverse of
acpi_get_table() to forget the early mapped pointer.

But how ACPICA can work with the early/late stage requirement? Inside of
ACPICA, tables are ensured to be remained in "INSTALLED" state during the
early stage, and they are carefully not transitioned to "VALIDATED" state
until the late stage. So the same logic is in fact implemented inside of
ACPICA in a different way. The gap is only that the feature is not provided
to the OSPMs in an accessible external API style.

It then is possible to fix the gap by providing an inverse of
acpi_get_table() from ACPICA, so that the two Linux sequences can be
combined:
 acpi_get_table();
 parse the table
 acpi_put_table();
In order to work easier with the current Linux code, acpi_get_table() and
acpi_put_table() is implemented in a usage counting based style:
 1. When the usage count of the table is increased from 0 to 1, table is
    mapped and .Pointer is set with the mapping address (VALIDATED);
 2. When the usage count of the table is decreased from 1 to 0, .Pointer
    is unset and the mapping address is unmapped (INVALIDATED).
So that we can deploy the new APIs to Linux with minimal effort by just
invoking acpi_get_table() in acpi_get_table_with_size() and invoking
acpi_put_table() in early_acpi_os_unmap_memory(). Lv Zheng.

Link: https://github.com/acpica/acpica/commit/cac67909Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 198fde8a061ac77357bcf1752e3c988fbe59f128

Implements a decode function for the ARGP_* parser info values
for all AML opcodes.

Link: https://github.com/acpica/acpica/commit/198fde8aSigned-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 68af3c3aa238dd8040e846ac6b4827a016434d8d

During early OS boot stage, drivers that have mapped system memory should
unmap it during the same stage. Linux kernel has an error message
indicating the unbalanced early memory mappings.

This patch back ports such error message into ACPICA for the early table
mappings, so that ACPICA development environment is also aware of this OS
specific requirement and thus is able to ensure the consistent quality
locally. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/68af3c3aSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 80e24663b212daac0c32767fdbd8a46892292f1f

This patch introduces acpi_tb_unload_table() to eliminate redundant code from
acpi_ex_unload_table() and acpi_unload_parent_table().

No functional change. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/80e24663Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 7fdac0289faa1c28b91413c8e394e87372aa69e6

acpi_tb_install_and_load_table() can invoke acpi_tb_load_table() to eliminate
redundant code.

No functional change. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/7fdac028Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 543342ab7a676f4eb0c9f100d349388a84dff0e8

This patch changes acpi_ev_initialize_region(), stop returning AE_NOT_EXIST
from it so that, not only in acpi_ds_load2_end_op(), but all places invoking
this function won't emit exceptions. The exception can be seen in
acpi_ds_initialize_objects() when certain table loading mode is chosen.

This patch also removes useless acpi_ns_locked from acpi_ev_initialize_region()
as this function will always be invoked with interpreter lock held now, and
the lock granularity has been tuned to lock around _REG execution, thus it
is now handled by acpi_ex_exit_interpreter(). Lv Zheng.

Link: https://github.com/acpica/acpica/commit/543342abSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit bc481e758e54f7644fd0b657119ca7763d8b6a9c

This is a back port result of the following commit:
  Commit: 8633db6b
  Subject: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()

Link: https://github.com/acpica/acpica/commit/bc481e75Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit f9fe27a68a90c9d32dd3156241a5e788fb6956ea

This patch adds acpi_ns_handle_to_name() so that in the acpi_get_name():
1. Logics can be made simpler,
2. Lock held for acpi_ns_handle_to_name() can also be applied to
   acpi_ns_handle_to_pathname().
The lock might be useless (see Link 1 below), but kept as acpi_get_name()
is an external API. Except the lock correction, this patch is a functional
no-op. BZ 1182, Lv Zheng.

Link: https://github.com/acpica/acpica/commit/f9fe27a6
Link: https://bugs.acpica.org/show_bug.cgi?id=1182 [# 1]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pavel Machek reports that commit 6ea8c546 (ACPICA: FADT support
cleanup) breaks thermal management on his Thinkpad X60 and T40p, so
revert it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=187311
Fixes: 6ea8c546 (ACPICA: FADT support cleanup)
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull KVM fixes from Paolo Bonzini:
 "ARM fixes.  There are a couple pending x86 patches but they'll have to
  wait for next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
  KVM: arm/arm64: vgic: Prevent access to invalid SPIs
  arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU

Merge media fixes from Mauro Carvalho Chehab:
 "This contains two patches fixing problems with my patch series meant
  to make USB drivers to work again after the DMA on stack changes.

  The last patch on this series is actually not related to DMA on stack.
  It solves a longstanding bug affecting module unload, causing
  module_put() to be called twice. It was reported by the user who
  reported and tested the issues with the gp8psk driver with the DMA
  fixup patches. As we're late at -rc cycle, maybe you prefer to not
  apply it right now. If this is the case, I'll add to the pile of
  patches for 4.10.

  Exceptionally this time, I'm sending the patches via e-mail, because
  I'm on another trip, and won't be able to use the usual procedure
  until Monday. Also, it is only three patches, and you followed already
  the discussions about the first one"

* emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
  gp8psk: Fix DVB frontend attach
  gp8psk: fix gp8psk_usb_in_op() logic
  dvb-usb: move data_mutex to struct dvb_usb_device

Pull char/misc fixes from Greg KH:
 "Here are three small driver fixes for some reported issues for
  4.9-rc5.

  One for the hyper-v subsystem, fixing up a naming issue that showed up
  in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
  resolving a reported regression.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ppdev: fix double-free of pp->pdev->name
  vmbus: make sysfs names consistent with PCI
  mei: bus: fix received data size check in NFC fixup

Pull driver core fixes from Greg KH:
 "Here are two driver core fixes for 4.9-rc5.

  The first resolves an issue with some drivers not liking to be unbound
  and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
  solves some reported problems with graphics and storage drivers. The
  other resolves a smatch error with the 4.9-rc1 driver core changes
  around this feature.

  Both have been in linux-next with no reported issues"

* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: fix smatch warning on dev->bus check
  driver core: skip removal test for non-removable drivers

Pull staging/IIO fixes from Grek KH:
 "Here are a few small staging and iio driver fixes for reported issues.

  The last one was cherry-picked from my -next branch to resolve a build
  warning that Arnd fixed, in his quest to be able to turn
  -Wmaybe-uninitialized back on again. That patch, and all of the
  others, have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: maxim_thermocouple: detect invalid storage size in read()
  staging: nvec: remove managed resource from PS2 driver
  Revert "staging: nvec: ps2: change serio type to passthrough"
  drivers: staging: nvec: remove bogus reset command for PS/2 interface
  staging: greybus: arche-platform: fix device reference leak
  staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
  staging: sm750fb: Fix bugs introduced by early commits
  iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
  iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
  iio: st_sensors: fix scale configuration for h3lis331dl
  staging: iio: ad5933: avoid uninitialized variable in error case

Pull USB / PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 4.9-rc5

  Nothing major, just small fixes for reported issues, all of these have
  been in linux-next for a while with no reported issues"

* tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix TIOCMIWAIT
  cdc-acm: fix uninitialized variable
  drivers/usb: Skip auto handoff for TI and RENESAS usb controllers
  usb: musb: remove duplicated actions
  usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER
  phy: sun4i: check PMU presence when poking unknown bit of pmu
  phy-rockchip-pcie: remove deassert of phy_rst from exit callback
  phy: da8xx-usb: rename the ohci device to ohci-da8xx
  phy: Add reset callback for not generic phy
  uwb: fix device reference leaks
  usb: gadget: u_ether: remove interrupt throttling
  usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include
  usb: dwc3: Fix error handling for core init

Pull more block fixes from Jens Axboe:
 "Since I mistakenly left out the lightnvm regression fix yesterday and
  the aoeblk seems adequately tested at this point, might as well send
  out another pull to make -rc5"

* 'for-linus' of git://git.kernel.dk/linux-block:
  aoe: fix crash in page count manipulation
  lightnvm: invalid offset calculation for lba_shift

Pull SCSI fixes from James Bottomley:
 "The megaraid_sas patch in here fixes a major regression in the last
  fix set that made all megaraid_sas cards unusable. It turns out no-one
  had actually tested such an "obvious" fix, sigh. The fix for the fix
  has been tested ...

  The next most serious is the vmw_pvscsi abort problem which basically
  means that aborts don't work on the vmware paravirt devices and error
  handling always escalates to reset.

  The rest are an assortment of missed reference counting in certain
  paths and corner case bugs that show up on some architectures"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
  scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
  scsi: qla2xxx: do not queue commands when unloading
  scsi: libcxgbi: fix incorrect DDP resource cleanup
  scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
  scsi: scsi_dh_alua: Fix a reference counting bug
  scsi: vmw_pvscsi: return SUCCESS for successful command aborts
  scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
  scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()

Pull clk fixes from Stephen Boyd:
 "The typical collection of minor bug fixes in clk drivers. We don't
  have anything in the core framework here, just driver fixes.

  There's a boot fix for Samsung devices and a safety measure for qoriq
  to prevent CPUs from running too fast. There's also a fix for i.MX6Q
  to properly handle audio clock rates. We also have some "that's
  obviously wrong" fixes like bad NULL pointer checks in the MPP driver
  and a poor usage of __pa in the xgene clk driver that are fixed here"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mmp: pxa910: fix return value check in pxa910_clk_init()
  clk: mmp: pxa168: fix return value check in pxa168_clk_init()
  clk: mmp: mmp2: fix return value check in mmp2_clk_init()
  clk: qoriq: Don't allow CPU clocks higher than starting value
  clk: imx: fix integer overflow in AV PLL round rate
  clk: xgene: Don't call __pa on ioremaped address
  clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
  clk: rockchip: don't return NULL when failing to register ddrclk branch

The DVB binding schema at the DVB core assumes that the frontend is a
separate driver.  Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:

    WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
    Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
    CPU: 1 PID: 28102 Comm: rmmod Tainted: P        WC O 4.8.4-build.1 #1
    Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
    Call Trace:
       dump_stack+0x44/0x64
       __warn+0xfa/0x120
       module_put+0x57/0x70
       module_put+0x57/0x70
       warn_slowpath_null+0x23/0x30
       module_put+0x57/0x70
       gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
       symbol_put_addr+0x27/0x50
       dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]

From Derek's tests:
    "Attach bug is fixed, tuning works, module unloads without
     crashing. Everything seems ok!"
Reported-by: Derek <user.vdr@gmail.com>
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.

From Derek's email:
    "Fix confirmed using 2 different Skywalker models with
     HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org>
Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack")
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The data_mutex is initialized too late, as it is needed for
each device driver's power control, causing an OOPS:

    dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0
    Oops: 0002 [#1] SMP
    Modules linked in: dvb_usb_cinergyT2(+) dvb_usb
    CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24
    Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
    task: ffff88020e943840 task.stack: ffff8801f36ec000
    RIP: 0010:[<ffffffff846617af>]  [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100
    RSP: 0018:ffff8801f36efb10  EFLAGS: 00010282
    RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100
    RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc
    RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000
    R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840
    R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0
    FS:  00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0
    Call Trace:
       mutex_lock+0x16/0x25
       cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2]
       dvb_usb_device_init+0x21e/0x5d0 [dvb_usb]
       cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2]
       usb_probe_interface+0xf3/0x2a0
       driver_probe_device+0x208/0x2b0
       __driver_attach+0x87/0x90
       driver_probe_device+0x2b0/0x2b0
       bus_for_each_dev+0x52/0x80
       bus_add_driver+0x1a3/0x220
       driver_register+0x56/0xd0
       usb_register_driver+0x77/0x130
       do_one_initcall+0x46/0x180
       free_vmap_area_noflush+0x38/0x70
       kmem_cache_alloc+0x84/0xc0
       do_init_module+0x50/0x1be
       load_module+0x1d8b/0x2100
       find_symbol_in_section+0xa0/0xa0
       SyS_finit_module+0x89/0x90
       entry_SYSCALL_64_fastpath+0x13/0x94
    Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP  [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10>
    CR2: 0000000000000000

So, move it to the struct dvb_usb_device and initialize it
before calling the driver's callbacks.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:

drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.

Fixes: 231147ee ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com>
Tested-by: Tested-by: Don Koch <kochd@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.

Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.

Fixes: b0b4e09c "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent regression in the 8250_dw serial driver introduced by
  adding a quirk for the APM X-Gene SoC to it which uncovered an issue
  related to the handling of built-in device properties in the core ACPI
  device enumeration code (Heikki Krogerus)"

* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / platform: Add support for build-in properties

Pull power management fixes from Rafael Wysocki:
 "These fix two bugs in error code paths in the PM core (system-wide
  suspend of devices), a device reference leak in the boot-time suspend
  test code and a cpupower utility regression from the 4.7 cycle.

  Specifics:

   - Prevent the PM core from attempting to suspend parent devices if
     any of their children, whose suspend callbacks were invoked
     asynchronously, have failed to suspend during the "late" and
     "noirq" phases of system-wide suspend of devices (Brian Norris).

   - Prevent the boot-time system suspend test code from leaking a
     reference to the RTC device used by it (Johan Hovold).

   - Fix cpupower to use the return value of one of its library
     functions correctly and restore the correct behavior of it when
     used for setting cpufreq tunables broken during the 4.7 development
     cycle (Laura Abbott)"

* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
  PM / sleep: fix device reference leak in test_suspend
  cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set

Pull ARC fixes from Vineet Gupta:

 - mmap handler for dma ops as generic handler no longer works for us
   [Alexey]

 - Fixes for EZChip platform [Noam]

 - Fix RTC clocksource driver build issue

 - ARC IRQ handling fixes [Yuriy]

 - Revert a recent makefile change which doesn't go well with oldish
   tools out in the wild

* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
  ARC: IRQ: Do not use hwirq as virq and vice versa
  ARC: [plat-eznps] set default baud for early console
  ARC: [plat-eznps] remove IPI clear from SMP operations
  Revert "ARC: build: retire old toggles"
  ARC: timer: rtc: implement read loop in "C" vs. inline asm
  ARC: change return value of userspace cmpxchg assist syscall
  arc: Implement arch-specific dma_map_ops.mmap
  ARC: [SMP] avoid overriding present cpumask
  ARC: Enable PERF_EVENTS in nSIM driven platforms

Merge tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
  avoid loading on non-toshiba systems.

  Documentation/ABI:
   - ibm_rtl: The "What:" fields are incomplete

  toshiba-wmi:
   - Fix loading the driver on non Toshiba laptops

  ideapad-laptop:
   - Add another DMI entry for Yoga 900"

* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
  toshiba-wmi: Fix loading the driver on non Toshiba laptops
  ideapad-laptop: Add another DMI entry for Yoga 900

Pull block fixes from Jens Axboe:
 "Two small (really, one liners both of them!) fixes that should go into
  this series:

   - Request allocation error handling fix for nbd, from Christophe,
     fixing a regression in this series.

   - An oops fix for drbd. Not a regression in this series, but stable
     material. From Richard"

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: Fix kernel_sendmsg() usage - potential NULL deref
  nbd: Fix error handling

Pull PCI fixes from Bjorn Helgaas:

 - Update MAINTAINERS for Intel VMD driver filename

 - Update Rockchip rk3399 host bridge driver DTS and resets

 - Fix ROM shadow problem that made some video device initialization
   fail

* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: VMD: Update filename to reflect move
  arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
  PCI: rockchip: Add three new resets as required properties
  PCI: Don't attempt to claim shadow copies of ROM

Pull drm fixes from Dave Airlie:
 "AMD, radeon, i915, imx, msm and udl fixes:

   - amdgpu/radeon have a number of power management regressions and
     fixes along with some better error checking

   - imx has a single regression fix

   - udl has a single kmalloc instead of stack for usb control msg fix

   - msm has some fixes for modesetting bugs and regressions

   - i915 has a one fix for a Sandybridge regression along with some
     others for DP audio.

  They all seem pretty okay at this stage, we've got one MST fix I know
  going through process for i915, but I expect it'll be next week"

* tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/udl: make control msg static const. (v2)
  drm/amd/powerplay: implement get_clock_by_type for iceland.
  drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
  drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
  drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
  drm/imx: disable planes before DC
  drm/amd/powerplay: return false instead of -EINVAL
  drm/amdgpu/powerplay/smu7: fix unintialized data usage
  drm/amdgpu: fix crash in acp_hw_fini
  drm/i915: Limit Valleyview and earlier to only using mappable scanout
  drm/i915: Round tile chunks up for constructing partial VMAs
  drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
  drm/i915/dp: BDW cdclk fix for DP audio
  drm/i915/vlv: Prevent enabling hpd polling in late suspend
  drm/i915: Respect alternate_ddc_pin for all DDI ports
  drm/msm: Fix error handling crashes seen when VRAM allocation fails
  drm/msm/mdp5: 8x16 actually has 8 mixer stages
  drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
  drm/msm/mdp5: handle non-fullscreen base plane case
  drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
  ...

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix mmc card initialization for hosts not supporting HW busy
     detection
   - Fix mmc_test for sending commands during non-blocking write

  MMC host:
   - mxs: Avoid using an uninitialized
   - sdhci: Restore enhanced strobe setting during runtime resume
   - sdhci: Fix a couple of reset related issues
   - dw_mmc: Fix a reset controller issue"

* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mxs: Initialize the spinlock prior to using it
  mmc: mmc: Use 500ms as the default generic CMD6 timeout
  mmc: mmc_test: Fix "Commands during non-blocking write" tests
  mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
  mmc: sdhci: Reset cmd and data circuits after tuning failure
  mmc: sdhci: Fix unexpected data interrupt handling
  mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
  mmc: dw_mmc: add the "reset" as name of reset controller
  Documentation: synopsys-dw-mshc: add binding for reset-names

Pull pin control fixes from Linus Walleij:
 "All is about drivers, no core business going on.

   - Fix a host of runtime problems with the Intel Cherryview driver:
     suspend/resume needs to be marshalled properly, and strange effects
     from BIOS interaction during suspend/resume need to be dealt with.

   - A single bit was being set wrong in the Aspeed driver.

   - Fix an iProc probe ordering fallout resulting from v4.9
     refactorings for bus population.

   - Do not specify a default trigger in the ST Micro cascaded GPIO IRQ
     controller: the kernel will moan.

   - Make IRQs optional altogether on the STM32 driver, it turns out not
     all systems have them or want them.

   - Fix a re-probe bug in the i.MX driver, it will eventually crash if
     probed repeatedly, not good"

* tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl-aspeed-g5: Never set SCU90[6]
  pinctrl: cherryview: Prevent possible interrupt storm on resume
  pinctrl: cherryview: Serialize register access in suspend/resume
  pinctrl: imx: reset group index on probe
  pinctrl: stm32: move gpio irqs binding to optional
  pinctrl: stm32: remove dependency with interrupt controller
  pinctrl: st: don't specify default interrupt trigger
  pinctrl: iproc: Fix iProc and NSP GPIO support

* pm-tools-fixes:
  cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set

* pm-sleep-fixes:
  PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
  PM / sleep: fix device reference leak in test_suspend

* device-properties:
  ACPI / platform: Add support for build-in properties

Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann:
 "It took a while for some patches to make it into mainline through
  maintainer trees, but the 28-patch series is now reduced to 10, with
  one tiny patch added at the end.

  Aside from patches that are no longer required, I did these changes
  compared to version 1:

   - Dropped "iio: maxim_thermocouple: detect invalid storage size in
     read()", which is currently in linux-next as commit 32cb7d27.
     This is the only remaining warning I see for a couple of corner
     cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc
     bot both report it on arm64)

   - Dropped "brcmfmac: avoid maybe-uninitialized warning in
     brcmf_cfg80211_start_ap", which is currently in net/master merge
     pending.

   - Dropped two x86 patches, "x86: math-emu: possible uninitialized
     variable use" and "x86: mark target address as output in 'insb'
     asm" as they do not seem to trigger for a default build, and I got
     no feedback on them. Both of these are ancient issues and seem
     harmless, I will send them again to the x86 maintainers once the
     rest is merged.

   - Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on
     feedback from Ilya Dryomov, who already has a different fix queued
     up for v4.10. The kbuild bot reports this as a warning for xtensa.

   - Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with
     a simpler patch, this one always triggers but my first solution
     would not be safe for linux-4.9 any more at this point. I'll follow
     up with the larger patch as a cleanup for 4.10.

   - Replaced "dib0700: fix nec repeat handling" with a better one,
     contributed by Sean Young"

* -Wmaybe-uninitialized fixes:
  Kbuild: enable -Wmaybe-uninitialized warnings by default
  pcmcia: fix return value of soc_pcmcia_regulator_set
  infiniband: shut up a maybe-uninitialized warning
  crypto: aesni: shut up -Wmaybe-uninitialized warning
  rc: print correct variable for z8f0811
  dib0700: fix nec repeat handling
  s390: pci: don't print uninitialized data for debugging
  nios2: fix timer initcall return value
  x86: apm: avoid uninitialized data
  NFSv4.1: work around -Wmaybe-uninitialized warning
  Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/stackdepot: export save/fetch stack for drivers
  mm: kmemleak: scan .data.ro_after_init
  memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB
  coredump: fix unfreezable coredumping task
  mm/filemap: don't allow partially uptodate page for pipes
  mm/hugetlb: fix huge page reservation leak in private mapping error paths
  ocfs2: fix not enough credit panic
  Revert "console: don't prefer first registered if DT specifies stdout-path"
  mm: hwpoison: fix thp split handling in memory_failure()
  swapfile: fix memory corruption via malformed swapfile
  mm/cma.c: check the max limit for cma allocation
  scripts/bloat-o-meter: fix SIGPIPE
  shmem: fix pageflags after swapping DMA32 object
  mm, frontswap: make sure allocated frontswap map is assigned
  mm: remove extra newline from allocation stall warning

Pull VFS fixes from Al Viro:
 "Christoph's and Jan's aio fixes, fixup for generic_file_splice_read
  (removal of pointless detritus that actually breaks it when used for
  gfs2 ->splice_read()) and fixup for generic_file_read_iter()
  interaction with ITER_PIPE destinations."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  splice: remove detritus from generic_file_splice_read()
  mm/filemap: don't allow partially uptodate page for pipes
  aio: fix freeze protection of aio writes
  fs: remove aio_run_iocb
  fs: remove the never implemented aio_fsync file operation
  aio: hold an extra file reference over AIO read/write operations