Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200730154026.39901-1-andriy.shevchenko@linux.intel.com

The variables ant_num and single_ant_path are being initialized with a
value that is never read and are being updated later with a new value.
The initializations are redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200723163214.995226-1-colin.king@canonical.com

mt76 patches for 5.9

* locking fixes
* tx queue mapping fixes for 7615/7915
* ARP filter offload for 7663
* runtime power management for 7663
* testmode support for mfg calibration
* memory leak fixes
* support for more channels

# gpg: Signature made Tue 21 Jul 2020 08:01:28 PM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900  42EF D77D 141D 02A7 6EF5

Chris Packham says:

====================
net: dsa: mv88e6xxx: port mtu support

This series connects up the mv88e6xxx switches to the dsa infrastructure for
configuring the port MTU. The first patch is also a bug fix which might be a
candiatate for stable.

I've rebased this series on top of net-next/master to pick up Andrew's change
for the gigabit switches. Patch 1 and 2 are unchanged (aside from adding
Andrew's Reviewed-by). Patch 3 is reworked to make use of the existing mtu
support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of the chips in the mv88e6xxx family don't support jumbo
configuration per port. But they do have a chip-wide max frame size that
can be used. Use this to approximate the behaviour of configuring a port
based MTU.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MV88E6190 and MV88E6190X both support per port jumbo configuration
just like the other GE switches. Install the appropriate ops.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MV88E6097 chip does not support configuring jumbo frames. Prior to
commit 5f436666 only the 6352, 6351, 6165 and 6320 chips configured
jumbo mode. The refactor accidentally added the function for the 6097.
Remove the erroneous function pointer assignment.

Fixes: 5f436666 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove casting the values returned by memory allocation function.

Coccinelle emits WARNING:

./drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:1027:9-23: WARNING:
 casting value returned by memory allocation function to (struct sg_desc *) is useless.

This issue was detected by using the Coccinelle software.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Parkin says:

====================
l2tp: avoid multiple assignment, remove BUG_ON

l2tp hasn't been kept up to date with the static analysis checks offered
by checkpatch.pl.

This patchset builds on the series: "l2tp: cleanup checkpatch.pl
warnings" and "l2tp: further checkpatch.pl cleanups" to resolve some of
the remaining checkpatch warnings in l2tp.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_session_free called BUG_ON if the tunnel magic feather value wasn't
correct.  The intent of this was to catch lifetime bugs; for example
early tunnel free due to incorrect use of reference counts.

Since the tunnel magic feather being wrong indicates either early free
or structure corruption, we can avoid doing more damage by simply
leaving the tunnel structure alone.  If the tunnel refcount isn't
dropped when it should be, the tunnel instance will remain in the
kernel, resulting in the tunnel structure and socket leaking.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_session_free is only called by l2tp_session_dec_refcount when the
reference count reaches zero, so it's of limited value to validate the
reference count value in l2tp_session_free itself.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_session_queue_purge is used during session shutdown to drop any
skbs queued for reordering purposes according to L2TP dataplane rules.

The BUG_ON in this function checks the session magic feather in an
attempt to catch lifetime bugs.

Rather than crashing the kernel with a BUG_ON, we can simply WARN_ON and
refuse to do anything more -- in the worst case this could result in a
leak.  However this is highly unlikely given that the session purge only
occurs from codepaths which have obtained the session by means of a lookup
via. the parent tunnel and which check the session "dead" flag to
protect against shutdown races.

While we're here, have l2tp_session_queue_purge return void rather than
an integer, since neither of the callsites checked the return value.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.

l2tp_ppp has a BUG_ON check of struct seq_file's private pointer in
pppol2tp_seq_start prior to accessing data through that pointer.

Rather than crashing, we can simply bail out early and return NULL in
order to terminate the seq file processing in much the same way as we do
when reaching the end of tunnel/session instances to render.

Retain a WARN_ON to help trace possible bugs in this area.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.

l2tp_ppp.c's BUG_ON checks of the l2tp session structure's "magic" field
occur in code paths where it's reasonably easy to recover:

 * In the case of pppol2tp_sock_to_session, we can return NULL and the
   caller will bail out appropriately.  There is no change required to
   any of the callsites of this function since they already handle
   pppol2tp_sock_to_session returning NULL.

 * In the case of pppol2tp_session_destruct we can just avoid
   decrementing the reference count on the suspect session structure.
   In the worst case scenario this results in a memory leak, which is
   preferable to a crash.

Convert these uses of BUG_ON to WARN_ON accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_tunnel_closeall is only called from l2tp_core.c, and it's easy
to statically analyse the code path calling it to validate that it
should never be passed a NULL tunnel pointer.

Having a BUG_ON checking the tunnel pointer triggers a checkpatch
warning.  Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_session_queue_purge is only called from l2tp_core.c, and it's easy
to statically analyse the code paths calling it to validate that it
should never be passed a NULL session pointer.

Having a BUG_ON checking the session pointer triggers a checkpatch
warning.  Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_dfs_seq_start had a BUG_ON to catch a possible programming error in
l2tp_dfs_seq_open.

Since we can easily bail out of l2tp_dfs_seq_start, prefer to do that
and flag the error with a WARN_ON rather than crashing the kernel.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpatch warns about multiple assignments.

Update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Willem de Bruijn says:

====================
icmp6: support rfc 4884

Extend the feature merged earlier this week for IPv4 to IPv6.

I expected this to be a single patch, but patch 1 seemed better to be
stand-alone

patch 1: small fix in length calculation
patch 2: factor out ipv4-specific
patch 3: add ipv6

changes v1->v2: add missing static keyword in patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the rfc 4884 read interface introduced for ipv4 in
commit eba75c58 ("icmp: support rfc 4884") to ipv6.

Add socket option SOL_IPV6/IPV6_RECVERR_RFC4884.

Changes v1->v2:
  - make ipv6_icmp_error_rfc4884 static (file scope)
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RFC 4884 spec is largely the same between IPv4 and IPv6.
Factor out the IPv4 specific parts in preparation for IPv6 support:

- icmp types supported

- icmp header size, and thus offset to original datagram start

- datagram length field offset in icmp(6)hdr.

- datagram length field word size: 4B for IPv4, 8B for IPv6.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Only accept packets with original datagram len field >= header len.

The extension header must start after the original datagram headers.
The embedded datagram len field is compared against the 128B minimum
stipulated by RFC 4884. It is unlikely that headers extend beyond
this. But as we know the exact header length, check explicitly.

2) Remove the check that datagram length must be <= 576B.

This is a send constraint. There is no value in testing this on rx.
Within private networks it may be known safe to send larger packets.
Process these packets.

This test was also too lax. It compared original datagram length
rather than entire icmp packet length. The stand-alone fix would be:

  -       if (hlen + skb->len > 576)
  +       if (-skb_network_offset(skb) + skb->len > 576)

Fixes: eba75c58 ("icmp: support rfc 4884")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable status is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.  Also put the variable declarations into
reverse christmas tree order.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The previous patch introduced a deadlock, this patch fixes it by making
sure the work is canceled without holding the global ovs lock. This is
done by moving the reorder processing one layer up to the netns level.

Fixes: eac87c41 ("net: openvswitch: reorder masks array based on usage")
Reported-by: syzbot+2c4ff3614695f75ce26c@syzkaller.appspotmail.com
Reported-by: syzbot+bad6507e5db05017b008@syzkaller.appspotmail.com
Reviewed-by: Paolo <pabeni@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This sockopt accepts two kinds of parameters, using struct
sctp_sack_info and struct sctp_assoc_value. The mentioned commit didn't
notice an implicit cast from the smaller (latter) struct to the bigger
one (former) when copying the data from the user space, which now leads
to an attempt to write beyond the buffer (because it assumes the storing
buffer is bigger than the parameter itself).

Fix it by allocating a sctp_sack_info on stack and filling it out based
on the small struct for the compat case.

Changelog stole from an earlier patch from Marcelo Ricardo Leitner.

Fixes: ebb25def ("sctp: pass a kernel pointer to sctp_setsockopt_delayed_ack")
Reported-by: syzbot+0e4699d000d8b874d8dc@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2020-07-23

This series contains updates to ice driver only.

Jake refactors ice_discover_caps() to reduce the number of AdminQ calls
made. Splits ice_parse_caps() to separate functions to update function
and device capabilities separately to allow for updating outside of
initialization.

Akeem adds power management support.

Paul G refactors FC and FEC code to aid in restoring of PHY settings
on media insertion. Implements lenient mode and link override support.
Adds link debug info and formats existing debug info to be more
readable. Adds support to check and report additional autoneg
capabilities. Implements the capability to detect media cage in order to
differentiate AUI types as Direct Attach or backplane.

Bruce implements Total Port Shutdown for devices that support it.

Lev renames low_power_ctrl field to lower_power_ctrl_an to be more
descriptive of the field.

Doug reports AOC types as media type fiber.

Paul S adds code to handle 1G SGMII PHY type.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/isdn/mISDN/socket.c: In function ‘data_sock_setsockopt’:
./include/linux/kern_levels.h:5:18: warning: format ‘%p’ expects argument of type ‘void *’, but argument 6 has type ‘sockptr_t’ [-Wformat=]
    5 | #define KERN_SOH "\001"  /* ASCII Start Of Header */
      |                  ^~~~~~
./include/linux/kern_levels.h:15:20: note: in expansion of macro ‘KERN_SOH’
   15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
      |                    ^~~~~~~~
drivers/isdn/mISDN/socket.c:410:10: note: in expansion of macro ‘KERN_DEBUG’
  410 |   printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
      |          ^~~~~~~~~~
drivers/isdn/mISDN/socket.c:410:38: note: format string is defined here
  410 |   printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
      |                                     ~^
      |                                      |
      |                                      void *
Signed-off-by: David S. Miller <davem@davemloft.net>

Christoph Hellwig says:

====================
get rid of the address_space override in setsockopt v2

setsockopt is the last place in architecture-independ code that still
uses set_fs to force the uaccess routines to operate on kernel pointers.

This series adds a new sockptr_t type that can contained either a kernel
or user pointer, and which has accessors that do the right thing, and
then uses it for setsockopt, starting by refactoring some low-level
helpers and moving them over to it before finally doing the main
setsockopt method.

Note that apparently the eBPF selftests do not even cover this path, so
the series has been tested with a testing patch that always copies the
data first and passes a kernel pointer.  This is something that works for
most common sockopts (and is something that the ePBF support relies on),
but unfortunately in various corner cases we either don't use the passed
in length, or in one case actually copy data back from setsockopt, or in
case of bpfilter straight out do not work with kernel pointers at all.

Against net-next/master.

Changes since v1:
 - check that users don't pass in kernel addresses
 - more bpfilter cleanups
 - cosmetic mptcp tweak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For architectures like x86 and arm64 we don't need the separate bit to
indicate that a pointer is a kernel pointer as the address spaces are
unified.  That way the sockptr_t can be reduced to a union of two
pointers, which leads to nicer calling conventions.

The only caveat is that we need to check that users don't pass in kernel
address and thus gain access to kernel memory.  Thus the USER_SOCKPTR
helper is replaced with a init_user_sockptr function that does this check
and returns an error if it fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer.  This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Factour out a helper to set the IPv6 option headers from
do_ipv6_setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.

Note that the get case is pretty weird in that it actually copies data
back to userspace from setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split ipv6_flowlabel_opt into a subfunction for each action and a small
wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the sockptr_t type to merge the versions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>