Jason A. Donenfeld says:

====================
Introduce The SipHash PRF

This patch series introduces SipHash into the kernel. SipHash is a
cryptographically secure PRF, which serves a variety of functions, and is
introduced in patch #1. The following patch #2 introduces HalfSipHash,
an optimization suitable for hash tables only. Finally, the last two patches
in this series show two usages of the introduced siphash function family.
It is expected that after this initial introduction, other usages will follow.

Please read the extensive descriptions in patch #1 and patch #2 of what these
functions do and the various levels of assurances. They're products of intense
cryptographic research, and I believe they're suitable for the uses outlined
herein.

The use of SipHash is not limited to the networking subsystem -- indeed I
would like to use it in other places too in the kernel. But after discussing
with a few on this list and at Linus' suggestion, the initial import of these
functions is coming through the networking tree. After these are merged, it
will then be easier to expand use elsewhere.

Changes v2->v3:
  - hsiphash keys now simply use an unsigned long, in order to avoid
    a cluttered ifdef and make it a bit more clear what's happening.
  - A typo in the documentation has been fixed.
  - The documentation has been augmented with an example relating to struct
    packing and passing.
  - The net_secret variable is now __read_mostly.

Hopefully this is the last of the required revisions, and v3 can be merged
into net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

SHA1 is slower and less secure than SipHash, and so replacing syncookie
generation with SipHash makes natural sense. Some BSDs have been doing
this for several years in fact.

The speedup should be similar -- and even more impressive -- to the
speedup from the sequence number fix in this series.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This gives a clear speed and security improvement. Siphash is both
faster and is more solid crypto than the aging MD5.

Rather than manually filling MD5 buffers, for IPv6, we simply create
a layout by a simple anonymous struct, for which gcc generates
rather efficient code. For IPv4, we pass the values directly to the
short input convenience functions.

64-bit x86_64:
[    1.683628] secure_tcpv6_sequence_number_md5# cycles: 99563527
[    1.717350] secure_tcp_sequence_number_md5# cycles: 92890502
[    1.741968] secure_tcpv6_sequence_number_siphash# cycles: 67825362
[    1.762048] secure_tcp_sequence_number_siphash# cycles: 67485526

32-bit x86:
[    1.600012] secure_tcpv6_sequence_number_md5# cycles: 103227892
[    1.634219] secure_tcp_sequence_number_md5# cycles: 94732544
[    1.669102] secure_tcpv6_sequence_number_siphash# cycles: 96299384
[    1.700165] secure_tcp_sequence_number_siphash# cycles: 86015473
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Laight <David.Laight@aculab.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HalfSipHash, or hsiphash, is a shortened version of SipHash, which
generates 32-bit outputs using a weaker 64-bit key. It has *much* lower
security margins, and shouldn't be used for anything too sensitive, but
it could be used as a hashtable key function replacement, if the output
is never exposed, and if the security requirement is not too high.

The goal is to make this something that performance-critical jhash users
would be willing to use.

On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias
SipHash1-3 to HalfSipHash1-3 on those systems.

64-bit x86_64:
[    0.509409] test_siphash:     SipHash2-4 cycles: 4049181
[    0.510650] test_siphash:     SipHash1-3 cycles: 2512884
[    0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920
[    0.512904] test_siphash:    JenkinsHash cycles:  978267
So, we map hsiphash() -> SipHash1-3

32-bit x86:
[    0.509868] test_siphash:     SipHash2-4 cycles: 14812892
[    0.513601] test_siphash:     SipHash1-3 cycles:  9510710
[    0.515263] test_siphash: HalfSipHash1-3 cycles:  3856157
[    0.515952] test_siphash:    JenkinsHash cycles:  1148567
So, we map hsiphash() -> HalfSipHash1-3

hsiphash() is roughly 3 times slower than jhash(), but comes with a
considerable security improvement.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.

For the first usage:

There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.

There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.

While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.

For the second usage:

A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.

Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing about the route lookup requires bottom half to be disabled.
Remove the local_bh_disable ... local_bh_enable around ip_route_input.
This appears to be a vestige of days gone by as it has been there
since the beginning of git time.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_init() call it but not check it's return value,
so change it to void return and add an internal BUG_ON() check.
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Willem de Bruijn says:

====================
convert tc_verd to integer bitfields

The skb tc_verd field takes up two bytes but uses far fewer bits.
Convert the remaining use cases to bitfields that fit in existing
holes (depending on config options) and potentially save the two
bytes in struct sk_buff.

This patchset is based on an earlier set by Florian Westphal and its
discussion (http://www.spinics.net/lists/netdev/msg329181.html).

Patches 1 and 2 are low hanging fruit: removing the last traces of
  data that are no longer stored in tc_verd.

Patches 3 and 4 convert tc_verd to individual bitfields (5 bits).

Patch 5 reduces TC_AT to a single bitfield,
  as AT_STACK is not valid here (unlike in the case of TC_FROM).

Patch 6 changes TC_FROM to two bitfields with clearly defined purpose.

It may be possible to reduce storage further after this initial round.
If tc_skip_classify is set only by IFB, testing skb_iif may suffice.
The L2 header pushing/popping logic can perhaps be shared with
AF_PACKET, which currently not pkt_type for the same purpose.

Changes:
  RFC -> v1
    - (patch 3): remove no longer needed label in tfc_action_exec
    - (patch 5): set tc_at_ingress at the same points as existing
                 SET_TC_AT calls

Tested ingress mirred + netem + ifb:

  ip link set dev ifb0 up
  tc qdisc add dev eth0 ingress
  tc filter add dev eth0 parent ffff: \
    u32 match ip dport 8000 0xffff \
    action mirred egress redirect dev ifb0
  tc qdisc add dev ifb0 root netem delay 1000ms
  nc -u -l 8000 &
  ssh $otherhost nc -u $host 8000

Tested egress mirred:

  ip link add veth1 type veth peer name veth2
  ip link set dev veth1 up
  ip link set dev veth2 up
  tcpdump -n -i veth2 udp and dst port 8000 &

  tc qdisc add dev eth0 root handle 1: prio
  tc filter add dev eth0 parent 1:0 \
    u32 match ip dport 8000 0xffff \
    action mirred egress redirect dev veth1
  tc qdisc add dev veth1 root netem delay 1000ms
  nc -u $otherhost 8000

Tested ingress mirred:

  ip link add veth1 type veth peer name veth2
  ip link add veth3 type veth peer name veth4

  ip netns add ns0
  ip netns add ns1

  for i in 1 2 3 4; do \
    NS=ns$((${i}%2)); \
    ip link set dev veth${i} netns ${NS}; \
    ip netns exec ${NS} \
      ip addr add dev veth${i} 192.168.1.${i}/24; \
    ip netns exec ${NS} \
      ip link set dev veth${i} up; \
  done

  ip netns exec ns0 tc qdisc add dev veth2 ingress
  ip netns exec ns0 \
    tc filter add dev veth2 parent ffff: \
      u32 match ip dport 8000 0xffff \
      action mirred ingress redirect dev veth4

  ip netns exec ns0 \
    tcpdump -n -i veth4 udp and dst port 8000 &
  ip netns exec ns1 \
    nc -u 192.168.1.2 8000
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The tc_from field fulfills two roles. It encodes whether a packet was
redirected by an act_mirred device and, if so, whether act_mirred was
called on ingress or egress. Split it into separate fields.

The information is needed by the special IFB loop, where packets are
taken out of the normal path by act_mirred, forwarded to IFB, then
reinjected at their original location (ingress or egress) by IFB.

The IFB device cannot use skb->tc_at_ingress, because that may have
been overwritten as the packet travels from act_mirred to ifb_xmit,
when it passes through tc_classify on the IFB egress path. Cache this
value in skb->tc_from_ingress.

That field is valid only if a packet arriving at ifb_xmit came from
act_mirred. Other packets can be crafted to reach ifb_xmit. These
must be dropped. Set tc_redirected on redirection and drop all packets
that do not have this bit set.

Both fields are set only on cloned skbs in tc actions, so original
packet sources do not have to clear the bit when reusing packets
(notably, pktgen and octeon).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Field tc_at is used only within tc actions to distinguish ingress from
egress processing. A single bit is sufficient for this purpose.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract the remaining two fields from tc_verd and remove the __u16
completely. TC_AT and TC_FROM are converted to equivalent two-bit
integer fields tc_at and tc_from. Where possible, use existing
helper skb_at_tc_ingress when reading tc_at. Introduce helper
skb_reset_tc to clear fields.

Not documenting tc_from and tc_at, because they will be replaced
with single bit fields in follow-on patches.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets sent by the IFB device skip subsequent tc classification.
A single bit governs this state. Move it out of tc_verd in
anticipation of removing that __u16 completely.

The new bitfield tc_skip_classify temporarily uses one bit of a
hole, until tc_verd is removed completely in a follow-up patch.

Remove the bit hole comment. It could be 2, 3, 4 or 5 bits long.
With that many options, little value in documenting it.

Introduce a helper function to deduplicate the logic in the two
sites that check this bit.

The field tc_skip_classify is set only in IFB on skbs cloned in
act_mirred, so original packet sources do not have to clear the
bit when reusing packets (notably, pktgen and octeon).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This field is no longer kept in tc_verd. Remove it from the global
definition of that struct.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the last reference to tc_verd's munge and redirect ttl bits.
These fields are no longer used.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While it is useful to know which MDIO device is being registered, demote
the dev_info() to a dev_dbg().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In dev_get_stats() the statistic structure storage has already been
zeroed. Therefore network drivers do not need to call memset() again.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The network device operation for reading statistics is only called
in one place, and it ignores the return value. Having a structure
return value is potentially confusing because some future driver could
incorrectly assume that the return value was used.

Fix all drivers with ndo_get_stats64 to have a void function.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2017-01-08

This series contains updates to fm10k only.

Ngai-Mint changes the driver to use the MAC pointer in the fm10k_mac_info
structure for fm10k_get_host_state_generic().  Fixed a race condition
where the mailbox interrupt request bits can be cleared before being
handled causing certain mailbox messages from the PF to be untreated
and the PF will enter in some inactive state.

Jake removes the typecast of u8 to char, and the extra variable that was
created for the typecast.  Bumps the driver version.  Added back the
receive descriptor timestamp value so that applications built on top
of the IES API can function properly.  Cleaned up the debug statistics
flag, since debug statistics were removed and the flag was missed in
the removal.

Scott limits the DMA sync for CPU to the actual length of the packet,
instead of the entire buffer, since the DMA sync occurs every time a
packet is received.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

fl4 arg is not used; remove it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr_get_route has 1 caller and the nowait arg is 0. Remove the arg and
simplify ipmr_get_route accordingly.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because every call to octeon_flush_iq() has a hardcoded 1 for the
pending_thresh argument, simplify that function by removing that argument.
This avoids one atomic read as well.
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The debug statistics were removed due to complications with the ethtool
statistics API which are not possible to resolve without a new
statistics interface. The flag was left behind, but we no longer need
it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This was accidentally removed when we defeatured the full 1588 Clock
support. We need to report the Rx descriptor timestamp value so that
applications built on top of the IES API can function properly.

Additionally, remove the FM10K_FLAG_RX_TS_ENABLED, as it is not used now
that 1588 functionality has been removed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

On packet RX, we perform a dma sync for cpu before passing the
packet up.  Here we limit that sync to the actual length of the
incoming packet, rather than always syncing the entire buffer.
Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Partially revert commit 5e93cbad ("fm10k: Reset mailbox global
interrupts", 2016-06-07)

The register bits related to this commit are now solely being handled by
the IES API. Recent changes in the IES API will allow an automatic
recovery from improper handling of these bits.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Multiple IES API resets can cause a race condition where the mailbox
interrupt request bits can be cleared before being handled. This can
leave certain mailbox messages from the PF to be untreated and the PF
will enter in some inactive state. If this situation occurs, the IES API
will initiate a mailbox version reset which, then, trigger a mailbox
state change. Once this mailbox transition occurs (from OPEN to CONNECT
state), a request for reset will be returned.

This ensures that PF will undergo a reset whenever IES API encounters an
unknown global mailbox interrupt event or whenever the IES API
terminates.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We don't need to typecast a u8 * into a char *, so just remove the extra
variable.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Since a pointer "mac" to fm10k_mac_info structure exists, use it to
access the contents of its members.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Isolate the HWMON support in DSA in its own file. Currently only the
legacy DSA code is concerned.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Murali Karicheri says:

====================
netcp: enhancements and minor fixes

This series is for net-next. This propagates enhancements and minor
bug fixes from internal version of the driver to keep the upstream
in sync. Please review and apply if this looks good.

Tested on all of K2HK/E/L boards with nfs rootfs.
Test logs below
K2HK-EVM: http://pastebin.ubuntu.com/23754106/
k2L-EVM: http://pastebin.ubuntu.com/23754143/
K2E-EVM: http://pastebin.ubuntu.com/23754159/

History:
  v1 - dropped 1/10 amd 2/10 of v0 based on comments from Rob as
       it needs more work before submission
  v0 - Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For NetCP NU Switch ALE, some of the mask bits are different than
defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use
a configurable mask bits and use it in the driver. These bits are set to
correct values by using the new variables added to cpsw_ale structure
and re-used in the macros. The parameter nu_switch_ale is configured by
the caller driver to indicate the ALE is for that switch and is used in
the ALE driver to do customization as needed.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ALE h/w on newer version of NetCP (K2E/L/G) does provide a ALE_STATUS
register for the size of the ALE Table implemented in h/w. Currently
for example we set ALE Table size to 1024 for NetCP ALE on
K2E even though the ALE Status/Documentation shows it has 8192 entries.
So take advantage of this register to read the size of ALE table supported
and use that value in the driver for the newer version of NetCP ALE.
For NetCP lite, ALE Table size is much less (64) and indicated by a size
of zero in ALE_STATUS. So use that as a default for now. While at it,
also fix the ale table size on 10G switch to 2048 per User guide
http://www.ti.com/lit/ug/spruhj5/spruhj5.pdfSigned-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In NU Ethernet switch used on some of the Keystone SoCs, there is
separate UNKNOWNVLAN register for membership, unreg mcast flood, reg
mcast flood and force untag egress bits in ALE. So control for these
fields require different address offset, shift and size of field.
As this ALE has the same version number as ALE in CPSW found on other
SoCs, customization based on version number is not possible. So
use a configuration parameter, nu_switch_ale, to identify the ALE
ALE found in NU Switch. Different treatment is needed for NU Switch
ALE due to difference in the ale table bits, separate unknown vlan
registers etc. The register information available in ale_controls,
needs to be updated to support the netcp NU switch h/w. So it is not
constant array any more since it needs to be updated based
on ALE type. The header of the file is also updated to indicate it
supports N port switch ALE, not just 3 port. The version mask is
3 bits in NU Switch ALE vs 8 bits on other ALE types.

While at it, change the debug print to info print so that ALE
version gets displayed in boot log.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of the newer Ethernet switch hw (such as that on k2e/l/g) can
strip the Etherenet FCS from packet at the port 0 egress of the switch.
So use this capability instead of doing it in software.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>