- 09 Feb, 2018 3 commits
-
-
Vadim Pasternak authored
Add define for the negative bus ID in order to use it in case no hotplug device is associated with the hotplug interrupt signal. In this case, the signal will be handled by the mlxreg-hotplug driver, but no device will be associated with the signal. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
Vadim Pasternak authored
Add defines for the bus IDs, used for hotplug device topology to improve code readability. Defines added for FAN and power units. Signed-off-by:
-
Geert Uytterhoeven authored
With gcc-4.1.2: drivers/platform/mellanox/mlxreg-hotplug.c: In function ‘mlxreg_hotplug_health_work_helper’: drivers/platform/mellanox/mlxreg-hotplug.c:347: warning: ‘ret’ is used uninitialized in this function Indeed, if mlxreg_core_item.count is zero, ret is used uninitialized. While this is unlikely to happen (it is set to ARRAY_SIZE(...) in x86 board files), this is done in another source file, so fix this by preinitializing ret to zero. Fixes: c6acad68 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
- 07 Feb, 2018 37 commits
-
-
Andy Shevchenko authored
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: -
Andy Shevchenko authored
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: -
Andy Shevchenko authored
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current users, which are many of them, and for new comers to decrease code duplication. Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
-
Linus Torvalds authored
Merge misc updates from Andrew Morton: - kasan updates - procfs - lib/bitmap updates - other lib/ updates - checkpatch tweaks - rapidio - ubsan - pipe fixes and cleanups - lots of other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) Documentation/sysctl/user.txt: fix typo MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns MAINTAINERS: update various PALM patterns MAINTAINERS: update "ARM/OXNAS platform support" patterns MAINTAINERS: update Cortina/Gemini patterns MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern MAINTAINERS: remove ANDROID ION pattern mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors mm: docs: fix parameter names mismatch mm: docs: fixup punctuation pipe: read buffer limits atomically pipe: simplify round_pipe_size() pipe: reject F_SETPIPE_SZ with size over UINT_MAX pipe: fix off-by-one error when checking buffer limits pipe: actually allow root to exceed the pipe buffer limits pipe, sysctl: remove pipe_proc_fn() pipe, sysctl: drop 'min' parameter from pipe-max-size converter kasan: rework Kconfig settings crash_dump: is_kdump_kernel can be boolean kernel/mutex: mutex_is_locked can be boolean ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: - membarrier updates (Mathieu Desnoyers) - SMP balancing optimizations (Mel Gorman) - stats update optimizations (Peter Zijlstra) - RT scheduler race fixes (Steven Rostedt) - misc fixes and updates * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Use a recently used CPU as an idle candidate and the basis for SIS sched/fair: Do not migrate if the prev_cpu is idle sched/fair: Restructure wake_affine*() to return a CPU id sched/fair: Remove unnecessary parameters from wake_affine_idle() sched/rt: Make update_curr_rt() more accurate sched/rt: Up the root domain ref count when passing it around via IPIs sched/rt: Use container_of() to get root domain in rto_push_irq_work_func() sched/core: Optimize update_stats_*() sched/core: Optimize ttwu_stat() membarrier/selftest: Test private expedited sync core command membarrier/arm64: Provide core serializing command membarrier/x86: Provide core serializing command membarrier: Provide core serializing command, *_SYNC_CORE lockin/x86: Implement sync_core_before_usermode() locking: Introduce sync_core_before_usermode() membarrier/selftest: Test global expedited command membarrier: Provide GLOBAL_EXPEDITED command membarrier: Document scheduler barrier requirements powerpc, membarrier: Skip memory barrier in switch_mm() membarrier/selftest: Test private expedited command
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes, plus add missing interval sampling to certain x86 PEBS events" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Add trace/beauty/generated/ into .gitignore perf trace: Fix call-graph output x86/events/intel/ds: Add PERF_SAMPLE_PERIOD into PEBS_FREERUNNING_FLAGS perf record: Fix period option handling perf evsel: Fix period/freq terms setup tools headers: Synchoronize x86 features UAPI headers tools headers: Synchronize uapi/linux/sched.h tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h tooling headers: Synchronize updated s390 kvm UAPI headers tools headers: Synchronize sound/asound.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "An endianness fix and a jump labels branch hint update" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/qrwlock: include asm/byteorder.h as needed jump_label: Add branch hints to static_branch_{un,}likely()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix error path in netdevsim, from Jakub Kicinski. 2) Default values listed in tcp_wmem and tcp_rmem documentation were inaccurate, from Tonghao Zhang. 3) Fix route leaks in SCTP, both for ipv4 and ipv6. From Alexey Kodanev and Tommi Rantala. 4) Fix "MASK < Y" meant to be "MASK << Y" in xgbe driver, from Wolfram Sang. 5) Use after free in u32_destroy_key(), from Paolo Abeni. 6) Fix two TX issues in be2net driver, from Suredh Reddy. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits) be2net: Handle transmit completion errors in Lancer be2net: Fix HW stall issue in Lancer RDS: IB: Fix null pointer issue nfp: fix kdoc warnings on nested structures sample/bpf: fix erspan metadata net: erspan: fix erspan config overwrite net: erspan: fix metadata extraction cls_u32: fix use after free in u32_destroy_key() net: amd-xgbe: fix comparison to bitshift when dealing with a mask net: phy: Handle not having GPIO enabled in the kernel ibmvnic: fix empty firmware version and errors cleanup sctp: fix dst refcnt leak in sctp_v4_get_dst sctp: fix dst refcnt leak in sctp_v6_get_dst() dwc-xlgmac: remove Jie Deng as co-maintainer doc: Change the min default value of tcp_wmem/tcp_rmem. samples/bpf: use bpf_set_link_xdp_fd libbpf: add missing SPDX-License-Identifier libbpf: add error reporting in XDP libbpf: add function to setup XDP tools: add netlink.h and if_link.h in tools uapi ... -
Kangmin Park authored
Fix 'documetation' to 'documentation' Link: http://lkml.kernel.org/r/CAKW4uUxRPZz59aWAX8ytaCB5=Qh6d_CvAnO7rYq-6NRAnQJbDA@mail.gmail.comSigned-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Commit 32173741 ("tty: serial: msm: Move header file into driver") removed the .h file, update the patterns. Link: http://lkml.kernel.org/r/2b7478bc4c35ab3ac6b06b4edd3b645a8c34a4a2.1517147485.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
-
Joe Perches authored
Commit 4c25c5d2 ("ARM: pxa: make more mach/*.h files local") moved the files around, update the patterns. Link: http://lkml.kernel.org/r/a291f6f61e378a1f35e266fe4c5f646b9feeaa6a.1517147485.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Commit 9e6c62b0 ("ARM: dts: rename oxnas dts files") renamed the files, update the patterns. [akpm@linux-foundation.org: crunch into a single globbed term, per Arnd] Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Commit 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") added invalid patterns. Fix it. Link: http://lkml.kernel.org/r/65b104609e0071d0fbe0dcce3a8e6138a4cf8c25.1517147485.git.joe@perches.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Joe Perches authored
Commit 34d2f4d3 ("ARM: Use generic clkdev.h header") removed the file, remove the pattern. Link: http://lkml.kernel.org/r/41bfff9449a5894b94f583983b6c6cb46f4cd821.1517147485.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
The file drivers/staging/android/uapi/ion_test.h was removed by commit 9828282e ("staging: android: ion: Remove old platform support") Remove the pattern. Link: http://lkml.kernel.org/r/182debec22002c9a1de44e79a7441288942b205c.1517147485.git.joe@perches.comSigned-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
-
Mike Rapoport authored
Link: http://lkml.kernel.org/r/1516700871-22279-4-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Mike Rapoport authored
There are several places where parameter descriptions do no match the actual code. Fix it. Link: http://lkml.kernel.org/r/1516700871-22279-3-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
-
Mike Rapoport authored
so that kernel-doc will properly recognize the parameter and function descriptions. Link: http://lkml.kernel.org/r/1516700871-22279-2-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
-
Eric Biggers authored
The pipe buffer limits are accessed without any locking, and may be changed at any time by the sysctl handlers. In theory this could cause problems for expressions like the following: pipe_user_pages_hard && user_bufs > pipe_user_pages_hard ... since the assembly code might reference the 'pipe_user_pages_hard' memory location multiple times, and if the admin removes the limit by setting it to 0, there is a very brief window where processes could incorrectly observe the limit to be exceeded. Fix this by loading the limits with READ_ONCE() prior to use. Link: http://lkml.kernel.org/r/20180111052902.14409-8-ebiggers3@gmail.comSigned-off-by:Eric Biggers <ebiggers@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Signed-off-by:
-
Eric Biggers authored
round_pipe_size() calculates the number of pages the requested size corresponds to, then rounds the page count up to the next power of 2. However, it also rounds everything < PAGE_SIZE up to PAGE_SIZE. Therefore, there's no need to actually translate the size into a page count; we just need to round the size up to the next power of 2. We do need to verify the size isn't greater than (1 << 31), since on 32-bit systems roundup_pow_of_two() would be undefined in that case. But that can just be combined with the UINT_MAX check which we need anyway now. Finally, update pipe_set_size() to not redundantly check the return value of round_pipe_size() for the "invalid size" case twice. Link: http://lkml.kernel.org/r/20180111052902.14409-7-ebiggers3@gmail.comSigned-off-by:
-
Eric Biggers authored
A pipe's size is represented as an 'unsigned int'. As expected, writing a value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to 32 bits, rather than failing with EINVAL as expected. (It *does* fail with EINVAL for values above (1 << 31) but <= UINT_MAX.) Fix this by moving the check against UINT_MAX into round_pipe_size() which is called in both cases. Link: http://lkml.kernel.org/r/20180111052902.14409-6-ebiggers3@gmail.comSigned-off-by:
-
Eric Biggers authored
With pipe-user-pages-hard set to 'N', users were actually only allowed up to 'N - 1' buffers; and likewise for pipe-user-pages-soft. Fix this to allow up to 'N' buffers, as would be expected. Link: http://lkml.kernel.org/r/20180111052902.14409-5-ebiggers3@gmail.com Fixes: b0b91d18 ("pipe: fix limit checking in pipe_set_size()") Signed-off-by:
Willy Tarreau <w@1wt.eu> Acked-by:
-
Eric Biggers authored
pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply to unprivileged users, as documented in both Documentation/sysctl/fs.txt and the pipe(7) man page. However, the capabilities are actually only checked when increasing a pipe's size using F_SETPIPE_SZ, not when creating a new pipe. Therefore, if pipe-user-pages-hard has been set, the root user can run into it and be unable to create pipes. Similarly, if pipe-user-pages-soft has been set, the root user can run into it and have their pipes limited to 1 page each. Fix this by allowing the privileged override in both cases. Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com Fixes: 759c0114 ("pipe: limit the per-user amount of pages allocated in pipes") Signed-off-by:
-
Eric Biggers authored
pipe_proc_fn() is no longer needed, as it only calls through to proc_dopipe_max_size(). Just put proc_dopipe_max_size() in the ctl_table entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS stub for it. (The reason the ENOSYS stub isn't needed is that the pipe-max-size ctl_table entry is located directly in 'kern_table' rather than being registered separately. Therefore, the entry is already only defined when the kernel is built with sysctl support.) Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.comSigned-off-by:
-
Eric Biggers authored
Patch series "pipe: buffer limits fixes and cleanups", v2. This series simplifies the sysctl handler for pipe-max-size and fixes another set of bugs related to the pipe buffer limits: - The root user wasn't allowed to exceed the limits when creating new pipes. - There was an off-by-one error when checking the limits, so a limit of N was actually treated as N - 1. - F_SETPIPE_SZ accepted values over UINT_MAX. - Reading the pipe buffer limits could be racy. This patch (of 7): Before validating the given value against pipe_min_size, do_proc_dopipe_max_size_conv() calls round_pipe_size(), which rounds the value up to pipe_min_size. Therefore, the second check against pipe_min_size is redundant. Remove it. Link: http://lkml.kernel.org/r/20180111052902.14409-2-ebiggers3@gmail.comSigned-off-by:
-
Arnd Bergmann authored
We get a lot of very large stack frames using gcc-7.0.1 with the default -fsanitize-address-use-after-scope --param asan-stack=1 options, which can easily cause an overflow of the kernel stack, e.g. drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes To reduce this risk, -fsanitize-address-use-after-scope is now split out into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack frames that are smaller than 2 kilobytes most of the time on x86_64. An earlier version of this patch also prevented combining KASAN_EXTRA with KASAN_INLINE, but that is no longer necessary with gcc-7.0.1. All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can bring back that default now. KASAN_EXTRA=y still causes lots of warnings but now defaults to !COMPILE_TEST to disable it in allmodconfig, and it remains disabled in all other defconfigs since it is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA to 3072 to reduce the noise, but an allmodconfig kernel still has around 50 warnings on gcc-7. I experimented a bit more with smaller stack frames and have another follow-up series that reduces the warning limit for 64-bit architectures to 1280 bytes (without CONFIG_KASAN). With earlier versions of this patch series, I also had patches to address the warnings we get with KASAN and/or KASAN_EXTRA, using a "noinline_if_stackbloat" annotation. That annotation now got replaced with a gcc-8 bugfix (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for older compilers, which means that KASAN_EXTRA is now just as bad as before and will lead to an instant stack overflow in a few extreme cases. This reverts parts of commit 3f181b4d ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next should be merged first to avoid introducing warnings in an allmodconfig build: 3cd890db ("media: dvb-frontends: fix i2c access helpers for KASAN") 16c3ada8 ("media: r820t: fix r820t_write_reg for KASAN") Do we really need to backport this? I think we do: without this patch, enabling KASAN will lead to unavoidable kernel stack overflow in certain device drivers when built with gcc-7 or higher on linux-4.10+ or any version that contains a backport of commit c5caf21a. Most people are probably still on older compilers, but it will get worse over time as they upgrade their distros. The warnings we get on kernels older than this should all be for code that uses dangerously large stack frames, though most of them do not cause an actual stack overflow by themselves.The asan-stack option was added in linux-4.0, and commit 3f181b4d ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y") effectively turned off the warning for allmodconfig kernels, so I would like to see this fix backported to any kernels later than 4.0. I have done dozens of fixes for individual functions with stack frames larger than 2048 bytes with asan-stack, and I plan to make sure that all those fixes make it into the stable kernels as well (most are already there). Part of the complication here is that asan-stack (from 4.0) was originally assumed to always require much larger stacks, but that turned out to be a combination of multiple gcc bugs that we have now worked around and fixed, but sanitize-address-use-after-scope (from v4.10) has a much higher inherent stack usage and also suffers from at least three other problems that we have analyzed but not yet fixed upstream, each of them makes the stack usage more severe than it should be. Link: http://lkml.kernel.org/r/20171221134744.2295529-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yaowei Bai authored
Make is_kdump_kernel return bool due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1513308799-19232-8-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
Yaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by:
-
Yaowei Bai authored
Make mutex_is_locked return bool due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-7-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Yaowei Bai authored
Make module_is_live return bool due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-6-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Yaowei Bai authored
Make iomem_is_exclusive return bool due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-5-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Yaowei Bai authored
Make current_cpuset_is_being_rebound return bool due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-4-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Yaowei Bai authored
Make __lockref_is_dead return bool due to this function only using either true or false as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-3-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Yaowei Bai authored
Make memblock_is_map/region_memory return bool due to these two functions only using either true or false as its return value. No functional change. Link: http://lkml.kernel.org/r/1513266622-15860-2-git-send-email-baiyaowei@cmss.chinamobile.comSigned-off-by:
-
Sergey Senozhatsky authored
The file was converted from print_symbol() to %pf some time ago in commit ef26f20c ("genirq: Print threaded handler in spurious debug output"). kallsyms does not seem to be needed anymore. Link: http://lkml.kernel.org/r/20171208025616.16267-10-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sergey Senozhatsky authored
hrtimer does not seem to use any of kallsyms functions/defines. Link: http://lkml.kernel.org/r/20171208025616.16267-9-sergey.senozhatsky@gmail.comSigned-off-by:
-
Sergey Senozhatsky authored
The file was converted from print_symbol() to %pSR a while ago in commit 071361d3 ("mm: Convert print_symbol to %pSR"). kallsyms does not seem to be needed anymore. Link: http://lkml.kernel.org/r/20171208025616.16267-3-sergey.senozhatsky@gmail.comSigned-off-by:
-
